Mercury Outboard Maintenance | 2 stroke 15hp | Water Pump Impeller Kit

Mercury Outboard Maintenance | 2 stroke 15hp | Water Pump Impeller Kit | Wandering Wassoms - S2.E11

Рет қаралды 84,165

Күн бұрын

Hello, and CONGRATS on finding this video! We hope that you find it as useful as we have intended it to be and that it answers nearly all your questions on how to perform BASIC MAINTENANCE on a MERCURY or other OUTBOARD motor, as well as the techniques you should use to WINTERIZE your outboard before STORAGE season (the saddest season of all).
There are a lot of great KZfaq videos out there on how to maintain, winterize, and store your mercury outboard motor, however, I could not find one that had absolutely EVERYTHING I needed with in-depth details. So… I decided to make one! Here it is!
I made the type of video that I had spent hours looking for!
If this video helps you out, please show your support by SUBSCRIBING to our channel, LIKING the video, or leaving a COMMENT! We greatly appreciate all of that!
Make sure to check out these PARTS & SUPPLIES below, which are the ones I ordered (mostly from Amazon.com) with their part numbers & prices at the time of purchase.
Lastly - CHECK OUT THE CHAPTERS that I’ve created. If all you need is to change out the Impeller - or just how to do the Spark Plugs - The chapters will let you skip straight there! I hope you find that handy.
Again - Thanks for Watching!!
PARTS:
Quicksilver Marine Grease 2-4-C with PTFE
* Where purchased: Amazon.com
* Part #: 802859Q1
* Price: $10.87
Quicksilver Power Tune Internal Engine Cleaner
* Where purchased: Amazon.com
* Part #: 858080Q03
* Price: $10.98
Quicksilver High Performance Gear Lube SAE90 (with Pump)
* Where purchased: Amazon.com
* Part #: 802891Q05
* Price: $24.79
Quicksilver Lower Unit Gear Lube Drain and Fill Hole Screw Seals
* Where purchased: Amazon.com
* Part #: 19183Q02
* Price: $5.83
Outboard Motor Water Pump Impeller Kit Replacement
* Where purchased: Amazon.com
* Part #: 46-42089A5
* Price: $39.38
Mercury Water Pump Flushing Kit
* Where purchased: ebay.com
* Part #: 12612T2
* Price: $21.95
NGK Spark Plugs
* Where purchased: Amazon.com
* Part #: 6729
* Price: $3.88/ each
RTV Sealant (Permatex 80050 Clear RTV Silicone Adhesive Sealant, 3 oz)
* Where purchased: Amazon.com
* Part #: Permatex 80050
* Price: $6.99
Loctite Heavy Duty Threadlocker, 0.2 oz, Blue 242, Single
* Where purchased: Amazon.com
* Part #: Blue 242
* Price: $5.97
Quicksilver 2-stroke Oil (Synthetic Blend)
* Where purchased: Amazon.com
* Part #:
* Price: $
Oil-Gas Mixer Bottle
* Where purchased: Amazon.com
* Part #:
* Price: $
CHAPTERS:
0:00 Intro + "Parts & Supplies" you’ll need
1:05 CLEANING THE MOTOR
3:16 GEAR BOX OIL CHANGE
7:29 FUEL FILTER: Cleaning & Maintenance
10:38 SPARK PLUGS: Remove, Inspect, Change out
15:20 WATER PUMP | IMPELLER: Complete Replacement
15:30 Horizontal Shift-shaft Lever Removal
15:58 Removing the Starter Motor
17:10 Remove the Gear Housing Drive Shaft Guide
17:47 Removing the Lower Unit
18:57 Removing the Impeller Housing
19:55 Removing the Impeller
21:03 Removing the Base Plate
21:28 Removing the Lower Impeller Unit & Shift Shaft
22:28 Notes about Removing the Shift Cam
24:55 Installing the New Impeller Kit
30:17 A better look inside the Mid-section of the Outboard
34:13 RTV Sealant Application
39:17 Reassembling the Lower Unit (Attempt No. 1)
40:56 Reassembling the Lower Unit (Attempt No. 2)
43:11 Reinstalling the Shift-shaft Lever
43:46 Reinstalling the Starter Motor
44:00 LUBRICATION POINTS
45:35 MIXING 2-STROKE OIL & GAS
49:32 Connecting your Fuel Line from Tank to Motor
51:18 PROPELLER: Remove, Inspect, Lube, Replace
52:27 FLUSHING COOLING SYSTEM WITH FLUSH MOUNT KIT
55:44 INTERNAL ENGINE CLEANER (FOGGING)
57:21 Thanks for Watching - Please Like & Subscribe
#MercuryOutboard #BoatMotor #MercuryMaintenance

Пікірлер: 147

@nichesound 2 жыл бұрын

This motor has a thermostat that is why it won't come out when first starting. I just did mine a 1994 it worked great your video helped with water pump removal..Thanks...Johnne in Clallam Bay WA

@jerryjarvis7115 9 ай бұрын

This was one of the most detailed videos ever used. You did a excellent job. Thanks for the video and details. 👍

@WanderingWassoms 5 ай бұрын

Thanks for your comment! Glad you enjoyed the video

@TR4zest Жыл бұрын

That "tiny whatever this is called" that locks the impeller to the shaft is a woodruff key. Very thorough video - thanks.

@doughorde8799 2 жыл бұрын

Very informative video and well done. I have a couple of older Merc 9.8's and enjoy working on them. One thing I would like to add is getting rid of the grey fuel lines on your tank. Over the years the plastic liner in them tends to break down and cause problems with carbs and fuel pumps. I just use the black fuel line from an automotive supply store. Keep the vids coming and happy boating!

@danawright72 2 жыл бұрын

Awesome video.Just loved the fact you showed the real B.S about lining up the water pipe and the true pain of putting the bottom end back on. All others I've seen never show the difficult parts. Thank you.

@WanderingWassoms 5 ай бұрын

Thanks for your comment! Glad you enjoyed the video

@timmylee1974 2 жыл бұрын

When your putting the water pump back together if you turn the main shaft clockwise while gentle pushing down on its cover housing you will seat the impeller much easier than trying to do it with a screwdriver. But never the less awesome video!! Thank you. I just picked up the 8hp version of this and I'll be using your video as I guide as I don't have a manual just yet.

@georgie2158 Жыл бұрын

Brother amazing. Well done. Time and detail with a great attitude. Awesome stuff man. Thank you i bought a 14' aluminum and a 1995 mercury 9hp. This will now all get done in the same order. Cool weekend project. Thanks again.

@rencougzip 3 жыл бұрын

Jason, you do such a great job in your videos! There is great information here. Thank you! 😊

@WanderingWassoms 3 жыл бұрын

I appreciate that Greg, thanks for watching!!

@danevans9347 Жыл бұрын

great details in the step by step to bring a old boat motor back to life. Other videos skim through the transom, but you showed us all of the steps to do the job. Thanks.

@WanderingWassoms Жыл бұрын

Glad it helped

@juliannefrank1913 Жыл бұрын

We have this very engine and are so appreciative of the effort you put into this. You instilled in us the confidence that we can do the maintenance ourselves….fingers crossed! Kudos for keeping it simple and providing all the supporting notes.

@WanderingWassoms Жыл бұрын

You are very welcome! Thanks for watching & commenting and good luck with your Mercury engine!

@maxsergeev7039 3 ай бұрын

Awesome video, true gem of tutorials! Following it frame-by-frame working on my 9.9 Merc. Special thanks for the list of supplies, made it so easy to get all those things!

@WanderingWassoms 3 ай бұрын

Thank you so much! Really glad that our video helped out!

@billkinsala353 5 ай бұрын

Well done video!!! Thank you very much for your time invested!

@WanderingWassoms 5 ай бұрын

Thanks for your comment! Glad you enjoyed the video

@Myplaceseqld Жыл бұрын

Kudos to you and your lovely for the hard work and effort that you guys went too in making everybody’s life easier including mine, you guys are fairdinkum legends so liked and subbed, cheers.

@tommyparker7287 Жыл бұрын

Thank you for taking time to post this! Very helpful!

@WanderingWassoms 5 ай бұрын

Thanks for your comment! Glad you enjoyed the video

@justjeepin5168 Жыл бұрын

Awesome video thanks for taking the time to make it ✌

@gbtivbay 3 ай бұрын

This vid was extremely useful, ive just followed it doing my 2001 Mariner 15 "stroke service & impeller etc. Really appreciate your help

@WanderingWassoms 3 ай бұрын

Glad it helped! Thanks for the comments, much appreciated!

@PapaMav Жыл бұрын

Good vid and good tip on putting the fuel filter screen back first, aligning it up top first before screwing the bowl back on. If either part of that ever breaks, I will just be replacing it with the kind of fuel filter you see on a lawn tractor.

@WanderingWassoms 5 ай бұрын

Thanks for your comment! Glad you enjoyed the video

@bdwdreamweaver 3 жыл бұрын

I have given this a full watch and this really is very technical. thumbs up

@WanderingWassoms 3 жыл бұрын

Much appreciated!!!

@SeniorSafetyAdvice 3 жыл бұрын

You do an awesome job with your videos - very detailed!

@WanderingWassoms 3 жыл бұрын

Thank you very much! Glad you like them, and thanks for watching :)

@coryhenry1291 Жыл бұрын

Sir..........I loved this video...very helpful glad i found it

@caseyhudson4633 3 жыл бұрын

Very nicely and professionally done!

@WanderingWassoms 3 жыл бұрын

Thank you very much Casey, we greatly appreciate your support :)

@davidmalone9022 3 жыл бұрын

Very nicely done, Jason. I've watched quite a few of these (usually related to sailboat maintenance) and this should be a really nice resource for those needing to do maintenance on 2-strokes. Great job. Now, just let me know when you get the video on snowblower maintenance done... 😄

@WanderingWassoms 3 жыл бұрын

Hahaha - I'll keep that in mind! Always been a shovel guy myself - the maintenance is quite low ;)

@gregkobylarz8648 Ай бұрын

A veteran Mercury outboard mechanic told me this- When you seat the new impeller into the cup, add a little grease into the cup and the impeller fins will find the correct direction upon start up.

@WanderingWassoms Ай бұрын

Amazing tip! Thank you so much for watching & commenting

@darrenharry2181 2 жыл бұрын

Good video mate. thanks from Australia

@michaelmilton4427 Жыл бұрын

Excellent Excellent video. Thank you so much!!

@mogatoka 5 ай бұрын

Great video!

@WanderingWassoms 5 ай бұрын

Thank you so much! Glad you enjoyed it.

@82HEADCASE 3 жыл бұрын

Great job on the mercury...I'm due to start mine soon !! One thing you may want to do to complete the job is pull the carb and change the gaskets !! The fuel pump diaphragm fails after a period of time... Great job agen

@WanderingWassoms 2 жыл бұрын

Thanks for the tips! I had planned to do the carb this winter :)

@Kana0211 2 жыл бұрын

Nice comprehensive overview. My merc is in need of this maintainance but once I can get it running I'll do this. Amazon part numbers are great.

@WanderingWassoms 5 ай бұрын

Thanks for your comment! Glad you enjoyed the video

@Davethe1979 2 жыл бұрын

Enjoyed your videos - hate to see y'all stop making them. I hope y'all are well.

@groundup421 3 ай бұрын

very well done

@WanderingWassoms 3 ай бұрын

Thank you! Glad you enjoyed it

@MikaLatokartano 2 жыл бұрын

An outstandingly clear and detailed video guide. I'm in the process of servicing my 2004 15 hp 2-stroke Mercury, and this basically covers all the bases. Thank you -- much appreciated!

@WanderingWassoms 5 ай бұрын

Thanks for your comment! Glad you enjoyed the video

@CookingWithJimmyK 3 жыл бұрын

That is like master mechanic stuff! I would just want to ride in the boat!😁😁👍👍

@WanderingWassoms 3 жыл бұрын

Hahaha - yeah, that's the best part for sure!! Thanks for watching :)

@wernerwilhelm7929 2 жыл бұрын

Very good video. Thank you

@chrissnik Жыл бұрын

Very helpful!

@RRoussel1 2 жыл бұрын

Very well done ... Thanks!

@WanderingWassoms 2 жыл бұрын

Glad you liked it! Appreciate the support :)

@micmardini 3 жыл бұрын

Thanks. Perfect video. Many many thanks

@WanderingWassoms 2 жыл бұрын

Glad you liked it!

@user-JHack 9 ай бұрын

Very helpful thank you!!

@patrickwelch620 2 жыл бұрын

Very nice video.

@ambush4464444 10 ай бұрын

Great video! I need to replace the bushing between the tiller handle and the motor. Do you have a clip of that or did I miss it?

@rickurban1394 2 жыл бұрын

B3st video I’ve ever seen for small HP mercy…thank u so much…

@WanderingWassoms 5 ай бұрын

Thanks for your comment! Glad you enjoyed the video

@tomlawrence2423 2 жыл бұрын

Hey! Great video! Is your motor a long or short shaft? And if you dont mind measuring what is the shaft length? Thank you! I am looking to purchase this same motor.

@nat8158 2 жыл бұрын

I have this same motor...very helpful. Do you disconnect your fuel line in between boat use? I have read contradictory thing. Thoughts? Thanks!

@luizalbiero3424 2 жыл бұрын

Top … aqui no Brasil possuo um mariner americano e estava com dúvida como retirar o vazamento de água no óleo de rabeta e você me ajudou muito com esse vídeo. Gostaria de saber onde eu consigo esse manual desse motor digital para baixar. Sucesso amigo e obrigado pelo vídeo.

@alexanderalegro5008 2 жыл бұрын

Good video 👌

@WanderingWassoms 2 жыл бұрын

Thank you 👍

@emreunsever94 Жыл бұрын

I have to fix my outboard that are the similar model but some parts are missing. Therefore can you record to outboard's shift mechanism with handle tiller?

@kyehosking 2 жыл бұрын

Is it possible to convert one of these to forward controls and steering instead of tiller arm? Any help much obliged

@richardhill5968 2 жыл бұрын

Awesome dyi video!!!! Anybody should be able to follow this instruction and save a TON of money! New SUB here!

@WanderingWassoms 2 жыл бұрын

Hey, thank you so much; for watching, commenting, and subscribing!!

@sailork3506 Жыл бұрын

Love the video. Very comprehensive. Best one in KZfaq. Only thing I'd recommend is that you replace the gear oil AFTER the impeller rebuild, since the impeller rebuild opens the lower reservoir to the shop and could result in small particles of crap falling in there. I have a 2003 that I've stored for 15 years and needs to be maintained. One question: There are tons of bad reviews on Amazon about the chinese 46-42089a5 impeller kit. I looked for quicksilver, but they seem to only admit that kit works on the 4-stroke motors. So outside of going to a Mercury dealer and buying a kit for $150 I am not sure what to do. Update: I got email confirmation that 46-42089A5 works on both 2-stroke and 4-stroke engines.

@WanderingWassoms Жыл бұрын

Thanks so much for the positive feedback and for sharing great information here with others who come across this!!

@johnyx6754 8 ай бұрын

Best video. Does this have a thermostat, or only in bigger engines?

@leeverink32 2 жыл бұрын

what i did was set the motor upside down on the flywheel that way the pipe cant fallout I also had ome corrosion on the tail section so i used automotive valve cover sealant its heat resistant and oil resistant sinds its sitting near the exaust. Now it will be cooled by water but you never no also the small coper pipe has a rubber booth at the end make sure that's not leaking because it will contaminate the oil in your tail section. Do not forget! When chganging the oil to fill it from the bottom with both screws out when its full it wil come from the top take the bottom screw replace the seal. Make sure not to drop it when pulling out the oil tube and quikly screw in the screw now put in the top one with a new seal and its done.

@WanderingWassoms 2 жыл бұрын

Thank you so much for the added tips!

@SandmannOZ Жыл бұрын

Thanks for the instructional video... very clear detailed instructions. I'm picking up my very first (used) boat in a week with a 1999 40HP 2stroke Merc and I imagine it's going to be a pretty similar job, so was great to see you do it first. One question (and I realise this vid's now 2 years old and you've probably already fixed it)... your engine seems to be missing the trim tab anode from just above the propellor... does this model not have one?

@WanderingWassoms Жыл бұрын

Doesn't have one on mine and haven't had any issues the past 4 years. This motor is still running strong :) Thank you for watching & commenting! :)

@danielrobert7181 Жыл бұрын

If I may add my 2 pence worth comment to your fine video, putting blue Locktite on bolts isn't about further securing them in,, it's really about keeping the threads from seizing up - a critical concern if you are cruising salt water. The Power Tune won't do much for your carburetor as it is intended to burn down carbon build up in the combustion chamber which could restrict air-fuel and exhaust gases movement and in extreme cases, affect the engine's performance by changing the compression ratio. Happily your's was producing white smoke which was just the PT burning as carbon produces a much darker smoke. Mind you, carbon build-up has become a thing of the past for those that use modern synthetic 2-stroke oil. Regards to you and Angel !

@WanderingWassoms Жыл бұрын

Thanks for watching and for the great comments; much appreciated!!

@tullyspry4289 7 ай бұрын

Wrong wrong wrong!

@lauchlanmenegon5916 2 жыл бұрын

my shift shaft is missing the c clip . do i need the clip or can I go with out ?

@mrsmd4616 2 жыл бұрын

Any tips on removing middle drive shaft housing thingy on a 9.9. Lower unit came off/apart easy. Seriously siezed together.

@WanderingWassoms 2 жыл бұрын

I'm not sure to be honest, I've only worked on this 15. Thank you for watching & commenting - appreciate the support.

@roopowered230 2 жыл бұрын

Hello, I have the same exact motor. What is the part number on the starter? Thank you for your time

@chriscowles1185 2 жыл бұрын

Just bought an old 14’ aluminum with a Mariner 15. My first video is yours. Looks like a keeper. Can your videographer get better close ups? The sunshine glare doesn’t help. That’s why professionals use the reflector I guess (not me).

@allenshank8917 Жыл бұрын

Your vid helped me out allot. Do you know anything about the on off switch? I have the same motor and I can’t get it to kill the motor. Thanks for the video

@WanderingWassoms Жыл бұрын

Glad it helped!! Thanks for watching and commenting. Sounds like a problem with the switch itself (or possibly the switch wiring). Feel free to provide an update here if you figured out what the issue was/is.

@brettcarmichael4822 2 жыл бұрын

What loctite did u use on the 3 lower end bolts

@MichaelMelchior-ll8to 11 ай бұрын

Do you need to put it into fw gear before you pull the lower?

@ambush4464444 Жыл бұрын

Do these motors have a trim tab to control steering?

@johnjones-uz4pi 2 жыл бұрын

Hi. Really great vid. I don't see part numbers for the gear oil seals/gaskets? R they pretty universal? Many thanks.... jj

@WanderingWassoms 2 жыл бұрын

Yes they are. Thanks for watching :)

@leekaus7937 2 жыл бұрын

How to put screws back in the water tube in the tail shaft i my 4o horse mercury 2 stroke

@mzh77 2 жыл бұрын

thanks man

@coryhenry1291 Жыл бұрын

Sir what was the oil mix cup?....it's not on the discretion thanks

@JoseRodriguez-vc3jh 2 жыл бұрын

Buen video muchas gracias

@WanderingWassoms 2 жыл бұрын

No problemo! Y muchas Gracias tambien

@avenaivucago1713 2 жыл бұрын

This is good and a marvelous job. How to fix crack cylinder head of mercury 15 horsepower outboard engine

@alissonprado3929 3 жыл бұрын

Ótimo vídeo você tem algum vídeo medindo a tensão das bobinas

@WanderingWassoms 3 жыл бұрын

Eu não medi a tensão. Talvez no próximo ano. Obrigado por assistir

@InglesFormulaFacil Жыл бұрын

Thanks for this video , I already changed the oil on my 2 stroke mercury 15 hp .. I would like to change the water pump on my motor, would you please share the link on the pump kit I need for mine too? I searched for it in Amazon but I get allot of options so I don’t know which one to buy . So I’m just gonna go with your same kit . Thank you for the video and the link to buy mine.

@WanderingWassoms Жыл бұрын

I believe you'll find all that info listed in the description of the video ;) Thanks for watching and good luck!

@InglesFormulaFacil Жыл бұрын

@@WanderingWassoms I did and i already ordered it . Thanks for your video 🙏

@toutounestef Ай бұрын

Hey buddy. I have 99 15 hp mariner. It burps when manually pushing throttle on the carb. But when manually pushing the lever with the idle wire. It runs awesome. Any ideas

@WanderingWassoms Ай бұрын

I wish I knew, but I’m sorry, I don’t. Thank you for watching the video and good luck with your motor.

@tobiasthun8354 2 жыл бұрын

I had a similar problems with not getting enough water from the tell tale and in my case the thermostat was broken.

@WanderingWassoms 2 жыл бұрын

Bummer about the broken thermostat, but at least you were able to diagnose and hopefully fix that! Thanks for watching.

@GraduadoFigo Жыл бұрын

Very informative video! Thank you! I have a mercury 15hp myself. I've been thinking about doing basic maintenance work on it myself. Thank you for the encouraging video! Just one observation: It seems that there is very little water leaving your cooling system? How does the engine run? Doesn't it overheat?

@WanderingWassoms Жыл бұрын

Sometimes the water just trickles out a little bit, especially when RPMs are low and idling, but as you rev up the RPMs more you'll start to see more water passing through to keep it cool. Thank you for watching & commenting! :)

@michaelmilton4427 Жыл бұрын

What are you running for fuel? I was hoping you had a link, i use tru fuel in my yard tools. That stuff is about $20 for almost a gallon. Thanks Mike

@WanderingWassoms 3 ай бұрын

Ethanol-Free gasoline mixed with oil at 50:50 ratio.

@Smith-Marine Жыл бұрын

Spark plugs with crush washer style not the tapered style have a 180 degree angle put on them after bottoming out the thread/lightly seated. Not a quart turn a half turn

@birebironline6123 9 ай бұрын

ı am from Turkey meen thank you for thıs

@jcalta75 2 жыл бұрын

Hello. Is your motor a US or JAPAN model?

@leeverink32 2 жыл бұрын

this manual is pretty hard to find any tips on where to find it?

@WanderingWassoms 2 жыл бұрын

We just did a search and found it online by make & model. thanks for watching!

@JanelleReneeWells 3 жыл бұрын

This awesome and helpful #landon

@darrylmcleman6456 Ай бұрын

Yamaha shift shaft disconnects in the middle to make it easier.

@jogguys 2 жыл бұрын

water from the tell tale looked weak ?

@finnafishfl 2 жыл бұрын

Definitely blue 😆

@finnafishfl 2 жыл бұрын

Thank you so much for this video btw. It's gonna help me a ton and it's exactly what I've been looking for.

@johnjones-uz4pi 2 жыл бұрын

Just found them. Doh!...

@WanderingWassoms 2 жыл бұрын

Glad you found them! ;)

@davidcastano7009 Ай бұрын

Hola me podría alludar que número lleva de chicler

@TruckeeDwaynee 2 ай бұрын

Hahaha mikey!! Haha

@marccohen5477 2 жыл бұрын

You didn't list where you find gasoline with no ethanol. I haven't seen that for more than 30 years here in the northeast.

@locknload9143 2 жыл бұрын

I've heard having unused gas for only 4 weeks is bad.

@robertfitzgerald3432 Жыл бұрын

Nice video but a few key pieces of assembly info seems to be missing.

@WanderingWassoms Жыл бұрын

Thank you for the comment. Feel free to post what's missing :)

@andrewc4207 4 ай бұрын

It's blue

@JanelleReneeWells 3 жыл бұрын

#landon terry

@WanderingWassoms 3 жыл бұрын

Love the #!! LOL

@JanelleReneeWells 3 жыл бұрын

Silly Landon! 🤦🤣💕 My phone just notified me of this comment because I guess Landon's logged into my ipad's KZfaq watching yall's videos & commenting. Lol.

@charlesshahan4792 2 жыл бұрын

why do this out at the end of driveway in a townhouse neighborhood when you have a nice garage? other than the bright sunshine for video... why? Nice lil engine stand, but a tools/parts shelf would be big! Lag screws and drilled out countersinking were overkill... but then again, overkill is much better than under-kill! Always, Always, Always... DO a compression check BEFORE ANY $$$ spent on ANY routine maintenance, repairs etc. If the motor has bad compression readings, you're just wasting time and money! Nice job though with commentary and added comments by video operator/helper!

@tyfab6288 9 ай бұрын

No fucks given about your neighbours 🤣

@RUSTYSURPLUS 2 жыл бұрын

Stop the hammering

@WanderingWassoms 2 жыл бұрын

Thanks! :)

@lepatpisang87 3 жыл бұрын

the cooling system is not perfect, the water coming out is too little, there is a possibility that the water pipe is clogged. try inserting a fine wire into the water pipe

@stevanrose7439 2 жыл бұрын

What I have used in the past is weed eater string. It’s strong and easy to push into the water tube works great.

@WanderingWassoms 2 жыл бұрын

Thanks for the tip, much appreciated :)