How to service a Mercury 15hp 2 stroke outboard

Рет қаралды 47,179

Күн бұрын

In this video I cover off how to do a regular service on a Mercury or tohatsu 15hp or 18hp 2 stroke outboard. The only thing i forgot to cover is that you should also grease all the joints - everywhere there is a nipple you should squirt a bit of grease in each point, just enough to start the old grease moving (too much just makes a mess)

Пікірлер: 43

@irfanhai6855 3 жыл бұрын

This was so helpful. Really appreciate it

@berko79 3 жыл бұрын

No problem!

@matthewkepa-rundell939 3 жыл бұрын

I don't know where I'd be without this vid! Appreciate the guidance 👍

@berko79 3 жыл бұрын

No worries glad it helped 👍

@craiggrocott7559 3 жыл бұрын

Great video, very helpfull, I was stumped with roll pins on the gear linkage, a stupid set up.

@berko79 3 жыл бұрын

Exactly the same fun i had the first time I did it... glad it helped. Obviously not very well edited but glad it is helping some people.

@Lukey_Games 4 жыл бұрын

Thanks, helped me service mine today.

@westcoast9354 2 жыл бұрын

Cheers bro helped me out

@berko79 2 жыл бұрын

No problem 👍

@SurRonald 2 жыл бұрын

How to tighten steering friction?

@johnathonuncapher7523 Жыл бұрын

Very helpful thank you

@berko79 Жыл бұрын

You're welcome, glad it was helpful!

@mattbrown4822 4 жыл бұрын

did he put the impeller in the wrong way

@pescaconchuchin4277 4 жыл бұрын

good afternoon could you help me with this engine that what it says in the description is good or bad Very very nice motor. Selling for my dad's buddy. Used literally once a year on a Canada trip. New electric ignition last year and lower rebuilt. Don't know anything about that I'm just listing. Runs perfectly very very nice.

@pescaconchuchin4277 4 жыл бұрын

it's good to buy a motor like that

@berko79 4 жыл бұрын

I dont think it makes too much difference if its only used once a year. I think the best thing to do would be to see it running in a bin or water or whatever and just make sure it runs well and pumps water properly.

@hossamam73 2 жыл бұрын

I have a 1987 Mercury 20hp electric start but I am not sure if the motor itself need oil or oil change (I add oil to the gas tank but I am not sure if this is needed). Do you add oil to yours? Thanks

@berko79 2 жыл бұрын

Yeah mine is a 2 stroke so i have to add oil to the fuel at 50:1 ratio. If yours is 2 stroke (i'd guess it probably is) then you are correctly adding oil to your gas.

@crusty181 4 ай бұрын

Thanks for the vid, very helpfull. If youre taking the gearbox off anyway to do the impeller, would it be easier to fill it holding it upside down before you replace it

@berko79 3 ай бұрын

Hmm interesting idea, I'm about to do a service on mine again so I'll have a look if thats possible.

@crusty181 3 ай бұрын

@@berko79 almost would have tried myself. Went to do the service but when i found the impeller etc all good didnt bother. I have a big trip later in the year so ill do a full service then. Interested to see how you go

@JuzzysAdventures 4 жыл бұрын

Hey mate, I have the same motor and I'm due for a service. First service since I've owned and i want to do it myself. Did you have to buy each part separately or does mercury do a full service kit? How much roughly for the kit? I'm in QLD at the Gold Coast

@berko79 4 жыл бұрын

Hi Mate, I actually bought mine off ebay - i've bought a few kits from the same seller and it just makes it easy. For some reason he doesnt have them listed right now so i cant link the exact one i bought, but something like this is what you want: www.boatservicegc.com.au/products-store/Mercury-15HP-2-Stroke-Service-Kit-Japanese-p86683801

@berko79 4 жыл бұрын

oh and just make 100% sure yours is a japanese made one and not a USA made one - they are very different outboards.

@noel270w8 8 күн бұрын

I know this is a few years old but just to point out you've put the impellor on incorrectly. Vanes/blades should be folded back in the opposite direction. Your pump will not operate properly and you will most likely break off the rubber vanes in a short time which could then block the water passage as well.

@chriscowles1185 2 жыл бұрын

Good engineers are rarely good talkers! Lol. That’s why they need a producer.

@berko79 2 жыл бұрын

haha thats it... I would have had to do the service about 20 times to reduce the number of ummms :)

@jamiecameron4532 2 жыл бұрын

That’s great. How do you tell what year it is fro the serial number?

@berko79 2 жыл бұрын

I don't have my engine here to check but my understanding is there is a square box with a 2 digit number on the identification sticker which is the year it was made.

@justlivinaus 2 жыл бұрын

Hi where did you get your kit from and how much ?

@berko79 2 жыл бұрын

I got mine off ebay and it was about $80 AUD from a guy in QLD. I just had a quick look and cant see them anymore, maybe hes sold out for now.

@seatonfield416 4 жыл бұрын

Great video! How did you get the lower leg off for the impeller replacement? Mine’s stuck where you cut the video. How did you get it? Any tips?

@berko79 4 жыл бұрын

I had to re-watch it, id forgotten i cut it out. - yeah you can see me struggle for a bit and then cut and its just off (haha).... It actually wasn't that easy and took a few minutes to get off. It was a combination of lightly tapping the lower leg (near the part where it joins) and once there was a small gap i was able to gently pry it with the flat head screwdriver. Good luck - mine was pretty stuck but a bit of persuasion and it let go eventually.

@praveenkumarharidasan6977 4 жыл бұрын

How to change lubricating oil in sump(crankcase)?

@berko79 4 жыл бұрын

Just clarifying that this is a 2 stroke. In a two-stroke engine, the crankcase is serving as a pressurization chamber to force air/fuel into the cylinder, so it can't hold a thick oil. Instead, you mix oil in with the gas/fuel to lubricate the crankshaft, connecting rod and cylinder walls.

@MrKrobbie 3 жыл бұрын

Why not fill the gearbox oil from the top?

@berko79 3 жыл бұрын

I believe you can, but because the oil is thick and you get air bubbles it can take a long time. I really did make a meal of it in this video, usually its a bit easier :)

@GoldCoast85 8 ай бұрын

A tad few years late to the comment. Hard to explain but they should be filled from the bottom as he said air bubble but it's the way it fills up also and getting into the groves. Apparently from the top you won't know if it's full properly because would have to wait but from the bottom you will know that it's be done correctly

@Kai-hz8uh 3 жыл бұрын

Cheers.

@eshay6132 4 жыл бұрын

for the heads up in the thumb nail you used a picture of the us model but your actual motor is a japanese model and there extremely different so you might want to change that or note that in the thumb nail or title.

@berko79 4 жыл бұрын

Oh thanks for pointing that out.... Yes my one is a Jap one. I'll add that to the title too. Thanks!

@Ed00032 3 жыл бұрын

How do you tell the difference?