Meshtastic LoRa Device as a DigiPi GPS! Perfect for APRS!
Рет қаралды 1,079
Күн бұрынThe meshtatsic device used in the video is the LILYGO T-Echo with the onboard GPS module. I was able to use this device with KM6LYW's Digipi software to make a mobile APRS igate and digipeater with accurate position reporting using the installed gpsd module.
00:00 Intro
01:05 Meshtastic Setup
03:40 Finding your Port
05:20 Configuring gpsd
06:50 Direwolf Config
09:50 Testing
10:00 Outro
Link to the DigiPi Project:
craiger.org/digipi/
Link to my TEcho:
www.lilygo.cc/products/t-echo
Commands used in the video:
sudo nano /etc/default/gpsd
My TBEACON Direwolf line:
TBEACON delay=00:15 every=05:00 symbol="igate" overlay=R via=WIDE1-1 power=5 height=5 gain=3 comment="MOBILE APRS I-Gate"
➡️Join this channel to get access to perks⬅️
/ @modernham
★★★ IMPORTANT LINKS★★★
✅Follow My Instagram- / modernham
✅Follow My Twitter- / hammodern
✅Blog and Merch - themodernham.com
Gear I use (Amazon Affiliate Link)
🔥 amazon.com/shop/modernham
⚡ Join the ModernHams Discord: ⚡
/ discord
@temporarilyoffline 2 ай бұрын
This is a pretty slick hack!
@ModernHam 2 ай бұрын
I just got my first meshtastic device and figured out about the serial out. Lots of untapped potential there. Pretty sure you can use the raw serial to a rs232 connection to the computer, and add the serial port as a serial port in bpq32 and have LoRa be part of your Packet radio node. Which is the next rabbit hole on my project list.
Jason Derulo
Рет қаралды 29 МЛН
HAMTech RADIO SCANNER M0FXB CB DRONE HOBBY Diary
Рет қаралды 1 М.
Electronic Clinic
Рет қаралды 13 М.
Andreas Spiess
Рет қаралды 496 М.
Rj Mobile 01
Рет қаралды 15 МЛН
lev89k
Рет қаралды 2,6 МЛН
i-shoppers обзоры
Рет қаралды 2 МЛН