No video

Metal Casting a Hook with a Microwave

  Рет қаралды 21,746

Shake the Future

Shake the Future

Күн бұрын

Пікірлер: 70
@wolpumba4099
@wolpumba4099 4 ай бұрын
*Abstract* This video demonstrates the process of creating a metal hook using a 3D printed mold and a microwave kiln. The creator utilizes various techniques and materials, including boron nitride, cheese wax, plaster, and brass scraps, to achieve the desired outcome. Despite encountering minor setbacks such as a cracked sprue and a stripped screw, the project ultimately results in a functional metal hook. *Summary* *3D Printing and Mold Preparation (**0:00**)* * 0:00: The video aims to showcase microwave metal melting by creating a missing bathroom hook. * 0:47: Boron nitride is applied to a screw and nut to facilitate later removal from the metal casting. * 1:52: Cheese wax is used to secure the screw, nut, and 3D printed sprue within the mold. * 3:01: A plaster and sand mixture forms the investment for the mold. *Mold Burnout and Metal Melting (**4:25**)* * 4:25: The mold is dried in an air fryer and then wrapped in aluminum foil for microwave burnout. * 5:54: Due to another mold already occupying the primary microwave kiln, a secondary one is used for the burnout process. * 7:57: The mold reaches 400°C, and the burnout cycle is adjusted for further heating. * 8:00: Brass scraps are melted in a preheated crucible with boric acid added to manage slag. *Casting and Finishing (**9:07**)* * 9:07: Zinc loss is observed during the brass melting process. * 9:56: The molten brass is poured into the mold using a vacuum casting setup. * 10:13: The screw is successfully extracted, but it is noted that using a non-stainless steel screw may have led to it being stripped due to the softening of the metal. * 12:42: The finished hook is slightly smaller than intended because the 3D printed model did not account for metal shrinkage. i used gemini 1.5 pro to summarize the transcript
@dustybrown4599
@dustybrown4599 4 ай бұрын
Hold on to your horses! While AI summaries of transcripts sound neat, there are some things to consider... Accuracy ain't guaranteed. AI isn't perfect, and jokes, sarcasm, or even key points might get lost in translation. The summary could be misleading! Copyright could be a party pooper. Summaries might contain bits of the transcript, which could be a copyright issue. Less engagement might sting creators. Having everything laid out in the comments could discourage people from actually watching the video. Not cool for creators who rely on views! Maybe think twice before pasting those summaries. ‍ I used free gemini to generate this response. lol
@daysejones968
@daysejones968 4 ай бұрын
why tho?
@leocurious9919
@leocurious9919 4 ай бұрын
How did you actually produce this summary? Can it analyze video content? Or just what he said after speech-to-text?
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Wow, that's awesome. Thanks for that. May I use it in the video description?
@thesentientneuron6550
@thesentientneuron6550 4 ай бұрын
@@ShakeTheFuturePlease pin this comment!
@bustersbashers2280
@bustersbashers2280 4 ай бұрын
I realise that it took some time and effort to make just a replacement hook but, the outcome is awesome, to think you made that with a microwave oven is incredible. Thanks 😊👍👍🙏🏻
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Thanks! The good thing is that I can reuse the hook in the future.
@kevinjames4405
@kevinjames4405 4 ай бұрын
truly the goat of microwave kilns
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Thanks for watching Kevin!
@StoneCut
@StoneCut Ай бұрын
So I spent the past 1.5 hours watching this channel and admiring your ingenuity. Thank you!
@ShakeTheFuture
@ShakeTheFuture Ай бұрын
Glad you enjoy it! Thanks!
@kentowakai1234
@kentowakai1234 4 ай бұрын
That is awesome, you were looking for an excuse to melt metal, we were hoping you would find an excuse. Feel free to find excuses.
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Thanks! I sure will find more excuses 😀
@daveash9572
@daveash9572 4 ай бұрын
What fun! For me, I would not mess about trying to cast the screw threads. I would cast the item without threads ans then drill and tap it afterwards. It takes a bit of practice, but not much.
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Thanks Dave! I have never done any thread tapping, so it was easier to do it this way. I am sure it would be much easier indeed! Cheers!
@95_Nepentheses
@95_Nepentheses Күн бұрын
I really want to do this! So many possibilities, and I have an old microwave...
@PaulDominguez
@PaulDominguez 4 ай бұрын
Wonderful video! I enjoy your work.
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Thanks for watching Paul!
@stewartpalmer2456
@stewartpalmer2456 4 ай бұрын
That totally looks like a mini cannon. You might want to consider making one.
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Thanks Stewart! I'll consider it.
@mheermance
@mheermance 4 ай бұрын
This is madness, but in a who could argue with success way. Also, the hone on your brass peg turned out great.
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Cheers!
@dontworryaboutit8445
@dontworryaboutit8445 4 ай бұрын
I’ve really been subscribed for 8 years
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
That's great, Thanks for watching. Time goes by fast.
@Howie672
@Howie672 4 ай бұрын
Love your work
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Thanks!
@s3al3v0
@s3al3v0 3 күн бұрын
Even you are the first one posted video of using microwave oven to melt metal but the queston here is how to make microwave still running when over heat , as everyone knows any electric devices always install security one to interfere when it is over heat . I “d tried two different microwaves when set up over 10 minutes ,they suddenly shut off.
@galaxya40s95
@galaxya40s95 4 ай бұрын
10:22 Using a TORX screw could help here. Or maybe quenching the screw, although that might not be easy to do and I guess if the screw snapped that would be way worse. Nice build, thanks for the vid.
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Thanks!
@truthreigns7
@truthreigns7 4 ай бұрын
Great video
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Thank You!
@truthreigns7
@truthreigns7 4 ай бұрын
@@ShakeTheFuture you are very welcome
@ChauHuh
@ChauHuh 4 ай бұрын
For the stripped screw, just put a rubber band over the screw head and then try again. It should grip and come right out.
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Oh, I forgot about that one. Cheers!
@sumguysr
@sumguysr 4 ай бұрын
You need a high tension hacksaw. Low tension hacksaws are such a pain.
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Thanks for the suggestion. I did not know what is a high tension hacksaw. Awesome, I will add it to my wishlist.
@sannyassi73
@sannyassi73 4 ай бұрын
Now- to make 3 more so they all match! Nice work, talk about overkill for making a hook! I like it :P
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Thanks! There is no need for the hooks to match...that way 1 member of the family can feel like king/queen hanging the towel on a golden coloured hook 😀 (golden for now...until it gets tarnished)
@andyh8239
@andyh8239 4 ай бұрын
Ever consider trying stainless steel 3D printing filament? e.g. If you can print plastic, you can make pure metal parts. The stainless Filamet enables one to print bound-metal filament on common 3D printers and debind & sinter printed parts in common kiln equipment. Once parts have been fired in a sintering furnace, the result is a 100% metal 3D printed part.
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Yes, I am aware of the sintering and metal filaments, but I have never tried it out. It's on my bucket list. Cheers!
@cheater00
@cheater00 4 ай бұрын
Wow. NICE
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Thanks
@MAJMAJESTIC
@MAJMAJESTIC 4 ай бұрын
Carbon steel bolt would have been dead soft.,stainless bolt would harden during cooling....generally. 😊
@abdeljalilabdeljalil5135
@abdeljalilabdeljalil5135 Ай бұрын
The crucible that is used for melting brass is the one that you made from silicon carbide and sodium silicate??
@arlynnecumberbatch1056
@arlynnecumberbatch1056 3 ай бұрын
the screw stripped, and its not your fault. robinsons all the way!
@chemarytech
@chemarytech 4 ай бұрын
Would it be possible to reuse the mold for multiple castings? I don't understand the vacuum cleaner vacuum station purpose, is the mold so porous that it lets the air pass?
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
It's possible to make reusable molds, but the process is a bit different. I plan to create a video on it at some point. Have you had a chance to watch the kiln/vacuum video linked in the description? In it, I demonstrate the effectiveness of vacuum with a few examples. The mold is indeed porous, allowing air to pass through but not the metal. Cheers!
@dustybrown4599
@dustybrown4599 4 ай бұрын
Can you please tell me why my microwave turns off after 2min as if it's over heating? I don't want to remove the sensor
@jamesblackwell5141
@jamesblackwell5141 4 ай бұрын
Appliance repair guy here..... The TCO (thermal cut-out) sensor will cut off power to the unit when your magnetron unit gets too hot. This keeps the ceramic magnets on the magtube from cracking. The best thing to do is not to remove the TCO sensor. However increasing cool airflow through the magnetron area of the microwave should improve this issue.
@dustybrown4599
@dustybrown4599 4 ай бұрын
@@jamesblackwell5141 Thank you! I considered this, but I wasn't sure where to pull/push the air through. I guess vacuum it from the vent (duh.) I'm concerned that mine overheats but other's microwaves don't seem to have this problem.
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
@@dustybrown4599 Some microwaves overheat too easily. I've used microwaves that weren't suitable for these kinds of projects due to overheating issues, but it's never been as bad as yours - just 2 minutes in. I only encounter overheating problems in July and August when attempting to melt something during the hottest hours of the day. By the way, check if the fan is running; it might be dead. If so, the microwave will overheat pretty quickly.
@dustybrown4599
@dustybrown4599 4 ай бұрын
@@ShakeTheFuture I'll do that, ty!
@enricotosco
@enricotosco Ай бұрын
Ciao ho seguito molto i tuoi progetti li trovo molto interessanti. Ho una domanda per te, hai fatto qualche modifica anche al microonde o l'hai lasciato così com'è?
@ShakeTheFuture
@ShakeTheFuture Ай бұрын
The microwave is not modified, other than small things that have nothing to do with the way it works. Thanks!
@enricotosco
@enricotosco Ай бұрын
@@ShakeTheFuture But I saw that you put the alluminium tape... Is not It necessary? An than, can't the ceramic wool coating be left fixed in the microwave?
@3v1Bunny
@3v1Bunny 4 ай бұрын
You be you please.. Haha not here for the wood working.
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Thanks 😀
@jetegtmeier71
@jetegtmeier71 4 ай бұрын
I never thought you could smelt in a microwave, I thought the metal would create sparks and end up ruining the microwave ???
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Yes, that's what I used to think too, but obviously it's not like that. Arcing is not an issues. Thanks for watching!
@rameezsheikh7576
@rameezsheikh7576 4 ай бұрын
You should lower the sound of hair driyer while editing the video 🫨
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
I did, but I guess it was still a bit too loud 😀Thanks for the tip.
@JohnDoe-qg6hm
@JohnDoe-qg6hm 4 ай бұрын
Really inefficient, expensive and time consuming way of making such a simple part. STUPID !
@ShakeTheFuture
@ShakeTheFuture 4 ай бұрын
Thank You for taking time to leave a comment.
@JohnDoe-qg6hm
@JohnDoe-qg6hm 4 ай бұрын
@@ShakeTheFuture Your welcome !
@andyh8239
@andyh8239 4 ай бұрын
😁
@serpentsforhair
@serpentsforhair 3 ай бұрын
How interesting, thanks for sharing! Can I ask - not a scientist - is it safe to use the microwave on it's side? Cause I thought the waves were from the top, "bounces" around the sides and the rotating plate helps the electro-waves hit all sides of the object for even heating (when used right side up)? I'm interested in using a taller mwk like yours but it wont fit unless on it's sides 🤔
@ShakeTheFuture
@ShakeTheFuture 3 ай бұрын
Thanks for watching! I can't speak for all microwaves, but I have never had any issues. In theory, there could be parts in the microwave that wear down faster due to change in orientation, but that's just a theory. The only potential issue (in theory) is for the microwave to break earlier than it normally would. I've been doing this for more than 5 years. Sure, some microwaves have broken down, but I can’t definitively say it was due to microwaving kilns, changing orientations of the microwave, or melting metals. My microwaves are used much more frequently than they typically would be in an average household, so that’s another factor to consider. The white microwave I use in the video is 4 years old. The magnetron died after 3 months of use, so I replaced it. Since then, the microwave, which was second-hand/Amazon returns, has been running without problems for over 3 years. As for microwave radiation escaping, that should not happen regardless of orientation. There are microwave leakage detectors that can be used to check for any leakage. I don’t want to encourage people to use their microwaves flipped on the side. All I can do is share my experience and leave that decision up to the individual. Cheers! Denny
@serpentsforhair
@serpentsforhair 3 ай бұрын
@@ShakeTheFuture Oh wow, thanks for taking the time to leave such an in-depth reply, Denny! I'll definitely take everything into consideration - it does give me more confidence, thank you once again!
Melting Cast Iron in a Microwave
18:30
Shake the Future
Рет қаралды 6 М.
Print-Wave Metal Casting: A Different Approach to Metal melting
17:15
Shake the Future
Рет қаралды 62 М.
Son ❤️ #shorts by Leisi Show
00:41
Leisi Show
Рет қаралды 10 МЛН
Look at two different videos 😁 @karina-kola
00:11
Andrey Grechka
Рет қаралды 14 МЛН
Microwave Kilns, Lost Wax/PLA/Resin casting with a Vacuum Cleaner
1:06:58
Shake the Future
Рет қаралды 120 М.
Quenching a Knife in Liquid Nitrogen!  Will it survive?
16:43
Nate From the Internet
Рет қаралды 3,9 МЛН
The BEST Metal Casting Alloy That Everyone Ignores
9:24
Paul's Garage
Рет қаралды 288 М.
Melt Metals in the Microwave | The Ultimate Guide
35:29
Shake the Future
Рет қаралды 579 М.
Print-Wave Metal Casting: Aluminium Mug
8:11
Shake the Future
Рет қаралды 12 М.
Scrapping Microwave Transformers | Unbelievable Money & Fast!
13:02
The Scrap-Meister
Рет қаралды 554 М.
Does Obsidian Really Form the Sharpest Edge?
12:44
Chronova Engineering
Рет қаралды 1,9 МЛН
Can You Melt Obsidian and Cast a Sword?
14:01
How To Make Everything
Рет қаралды 21 МЛН
The Ultimate HOMEMADE Rust Remover (Better than EvapoRust)
14:09
Beyond Ballistics
Рет қаралды 195 М.
Son ❤️ #shorts by Leisi Show
00:41
Leisi Show
Рет қаралды 10 МЛН