Oh man I just laid the 2k clear over the "wino Kandy and cherry pie flake" and it looks friggin AMAZING. I was nervous you wouldn't be able to see the flake until I clear coated everything. 100% brilliant and BEAUTIFUL!!. Looks extremely professional. Thanks Roth dudes!!

Been a professional Sprayer for 30 years. Looks to Me like You should tilt the part/tank toward You, start at one end going up, over and down 'til You reach the other end rather than starting in the centre working down one side then starting in the centre again and working down the other side. This will eliminate a Lap Marks especially in the Candy Coats which are susceptible to dark spot/lines wherever You have a Lap Mark which is actually an extra Coat. Each successive Coat of Candy or type of Coloured/ Tinted Transparent will be darker wherever You have a Lap (double coat) Mark. God Bless Y'all. Jimmy in NC....

“You don’t wanna bring no mutant into the world, do ya?” Awesomeness!!!! Subscribed!

ohh I use to work at a custom paint shop down the street from these guys. Id go down and buy those dummy tanks and just nose around, Really great guys super helpfull. this was over 10 years ago. To be honest im shocked there still there but hey that shows you good customer service goes along ways.

doing this now...got base flake, and clear. going on a dyna tank...flames...first time! so far so good....

I met Ed Roth at Bonneville Speed Week in 1998. He was a cool cat even in the heat.

I remember you. We were kids. Gawd those were fun days.

Awesome. Simply awesome.

I gotta get some for my mini bike ! Heelll yeah!

Just blasted my brain bucket with Nightshade Vunderbomb. Digging the trippy look!

make sure you do it out doors in the wind and dirt

GASP! you can get this paint in a rattle can!?!? now I need something to paint.

thanks for the info man I got a 59 F100 and I've got the flake fever going to do the top and the dash on the inside can't wait thanks now think I'm going to add a little candy on the dash 2:-)

Make a video with the Vunderbombs! I'm interested to see how they come out

looks like tape ripped off silver paint on border where silver meets red 7:06 looks like heavy chipping

Great stuff u guys are great I’m sold .

Great products and close to home too.

Just discovered this - awesomeness!! Liked, subscribed, and learning!!

Hey man, I’m from Kenosha!

love the videos in the info

Should I 800 wetsand between the base and flake?Same for between flake and kandy,kandy and clear?Thanks for sharing!Sure miss your dad!

I fuckin love your paint and flake! Just did a new Traxxas summit in deep hold giant fkn metalflake with tons of deep clear coat looks so nice everyone asks how I did it.

Just ordered a couple of cans will be doing a helmet thanks and get some more vids out

Just bought the all in one nightshade and the purple basecote. Debating on whether to sand my bass down or purchase the adhesion spray

Would like to try it. Badass

Guys. How long should U wait for the paint to dry before taping off your design and how long should I wait b4 applying the clear coat. Thanks

Im about to do my Honda Ruckus in that silver and cherry pie. I wanna make a video of painting it. Looks killer dudes.

Entertaining as hell. Those guys are hilarious.

I just bought the cherry pie flake from Amazon. I'm planning to use it on my rc body.

SHOULD I COMPOUND AND BUFF AFTER CLEAR COAT

How many cans would it take to do a fender on a 77 Thunderbird of each can,THANKS IN ADVANCE

LOVE ROTH...................ITCHY.

How well does this system hold up to uv rays? I know krylon fades in about a year with uv ray exposure

Cool stuff!! I bought some from you last year at Dead Man's Curve...will you be there this year??

what are the flash times between the coats? with like 10-15 coats with all the cans.. is it like 5-10 min between coats? And when you are done 24-72 hours til the paint has hardent?

Do you have to use SEM high build primer or can you use just any other quality brand primer ?

How long after primer is done and hour?

so after the last layer of base coat, wait 10 minutes or so and than lay down the flake coats?

You guys are FLAKES! I'll be a FLAKE too after I shoot my 62 Ranch w/ the Lime Squeezer. Now that I've watched the class do I get a diploma? I'll send pics once its done up pretty pretty.

Is it just me, or did that once sparkling flake undercoat practically vanish after the red candy was applied over it? I thought metal flake was supposed to easily be seen through a candy top coat? Might have helped if the finished product was shown in bright light.

sweet products & demo... building a tricked out cb750 w GSXR parts galore...hmm? got any suggestions on the rear swing arm? its a 2007 gsxr 750 and getting mated w a r17/55/180 ..want it to def. pop in the sun thinking retro Honda colors but w a deep copper/ rose gold on to show depth in the sun.

First Off, Great Video, question, after the primer, do you use the 400 anymore between coats, or just a final prior to the clear? Thanks Guys Respectfully, Jim Price, Jenuine Motor

Question once again Sir, I will be painting a high end resurrected from the 50's Gas Model Airplane, anyhow, what i am working on has considerably less area to cover,bu a third a 23" wingspan. The Question is i am concerned about the size of the metal flake being to large, Bid Daddy, use to put flakes on the size or a dime, and I can't count how many of his kits I built in different colors, all for my MOM to take to the good will when I got Drafted.Are you ever going to put your Sacramento ford's vintage purple into a Rattle bomb, and again Thank you for taking the time to explain how your system works, Respectfully, Jim P.,Jenuine Motor

this is rad keep it going!

Hey mans I gotta ask! How good dose this stand up against scratching and ext. Most "spray paints" are trash and don't hold up that well, my bike leaked gas and stripped the paint and primer right off

What type of paint is it? In the flake cans.

Can you also use this on lowrider bikes?

I know tou said to wet sand after priming, but did you wet sand between any of the other coats?

still waiting on the vunderbomb vid

You guys ship international?

Haha you guys are classic!... Pretty much gonna be exactly the same when i'm your age lol

Hilarious! definitely gonna get some paint

Question, Once you push the hardener button on the clear is all the clear in the can Hardened? Can you save some for another project?

i do the same thing with Dupli-Color Paint Metal Specks and duplicolor metalcast 8 bucks a 11oz can

Cool , now you get to pay for everyone's detailing bill to remove the 2 different oversprays now on everything since you did it right there out front of the store with rides in the background ( 5:37 ). Do you know how far overspray can travel outdoors ?

Hey Thank You For your reply, one more question Please, what is the name of the degreaser you used to clean part before primer after having using the 400 ish red scratch Pad. I am getting ready to paint a old Gilbert Model airplane Any how Thank You Once More, Respectfully, Jim price

please do more videos!!!

Did you had problems with the base coat flaking or distorting with the 2k? Many say they are incompatible but Id prefer hearing from someone that has done it

Where can i find the mini flake buster

Wish me luck flaking my 96 Geo!

Where was this shot? You said Ca but looks like NYC. SWEET VIDEO. THANKS!

What if you flake a snap-on tool box that would be cool

Kenosha Wisconsin!

Will that primer adhere to wood?

Well that was entertaining.

where can i order the set of cans in the vid im doing my rifle and want it so sparkle in red just the way that tank does im in the uk. ?

What’s the groovy surf music?

Nice how much are your paints. Clear ect

Why not sell all the kandy kolors mang! Looking forward to seeing more kandies!

Sorry for the typo "It will explain-"

I used the all in one rattle bomb (rajun red) recently on a guitar that i refinished. I clear coated it with the 2k max. The color and finish is gorgeous, but whats the best method for getting rid of the orange peel?

please do more videos please

So to not get contamination... use the degreaser, WHILE TOUCHING THE SUBJECT WITH BARE HAND. Okay... got it. Damn this is like watching bad chad...

Man I'm a Rat Fink 4 LIFE!!

where is that store in fremont?

😛😛😛😛😛😛😛😛

The Silver Flake jams up the second you spray it. 4 cans, shook for 3 to 5 minutes, NONE of them worked. Its too bad. I want to like the stuff.

Where can I buy your products

Would it work on a guitar body?

one thing I thought you weren't supposed to put candy over flake it's candy 1st and flake second then clear just saying :-)

i get the same way when i get high off toxic spray paint

show pics of the volvo or it didnt happen

ü

looks like a candy t-bone steak

that was a silver spaceship.

tesla the band is way better than the car.

2013:"No government shutdown here baby!". 2020: Total global shutdown in progress.... Enjoy the flakin' while you can Roth fans, the New World Order cometh.

Hello...give what ever you're spraying a few hours to dry!!

mr roth.i had the biggest let down of my life. since i started airbrushing t-shirts and evolved to lowrider semi fame. i always payed hoge to your father and von dutch. i do not have the typical mexican tattoos . i have rat fink, eyeball, and kustum kulture. i always saw everyone i admired do rat fink cartoons and sell them and what have you. i paid money for my tattoos.i made a few items and sold them on ebay and i got a letter from mrs, ilene roth, i believe that was her name. she told me to stop my crap etc.so my question is does everyone ask for permision or how do you go about that?; i would like to buy your products and things like that but honestly , i even regret admiring and going as far as tattooing myself with the things i did.i do not like to be asked about them either. can you give me at least an opinion?; it was a nice portrait of big daddy as i excell in photorealism and it was only one...thanks

My uncle is in tesla...the band

I live in Kenosha ....wtf is going on here

new guys, maybe don't spray in the wind

Burnout! Not Ed Roth for sure!

Lol im from Wisconsin

I've baught two cans of this crap and its not worth a shit. No color and no flake.