How to: Install COLORBOND® Corrugated Iron on Gable roof

No video

How to: Install COLORBOND® Corrugated Iron on Gable roof

Рет қаралды 48,897

Күн бұрын

#metalroofingonline #metalroofing #colorbond #zincalume
Our roof plumber Darren shows you just how easy it is to install COLORBOND corrugated sheets in PALE EUCALYPT on a Gable roof.
A gable roof is the classic, most commonly occurring roof shape in those parts of the world with cold or temperate climates. It consists of two roof sections sloping in opposite directions and placed such that the highest, horizontal edges meet to form the roof ridge. The design of this type of roof is achieved using rafters, roof trusses or purlins. The pitch of the roof and the height of the gutters can vary greatly.
Order online here: www.metalroofi...

Пікірлер: 41

@PNH-sf4jz 4 жыл бұрын

Great set of tutorials with some good-natured humour as well. Thanks Darren, to you and the team. Cheers, Peter

@metalroofing7210 3 жыл бұрын

PNH 6000 Thank you Peter 😊👍

@glennhiggins8163 3 жыл бұрын

Excellent tutorial Mr Lennon 😂, Thanks for the tips and more importantly the reference to the regulations. Great work (again!!) Cheers Darren.

@metalroofing7210 3 жыл бұрын

Hi Glenn Thanks for your kind words 😀

@ahatter20 2 жыл бұрын

I could never understand why is the foil facing down...

@BobCycleBrisbane Жыл бұрын

Great instructional video.

@UzumakiGarage Жыл бұрын

Thanks for another great video Darren. I just watched it again to freshen up my memory before hoping on my new project today. cheers

@riffraff8490 3 жыл бұрын

Bravo and thank you. I think I'll give it a go.

@metalroofing7210 3 жыл бұрын

Thanks Riff Raff, Good luck with your project 🤙

@joshkwd8527 9 ай бұрын

Darren you have done an amazing video. thank you so much!

@billybrackman5143 5 жыл бұрын

Thx for making the video

@MetalRoofingOnline 5 жыл бұрын

Billy Brackman no problems. Hope it was able to help you. 😀

@elroyjohnston6226 5 жыл бұрын

Thanks for the vid mate, been roof plumbing for 10 years and still don’t know how to sheet

@MetalRoofingOnline 5 жыл бұрын

Glad we can help!

@attesaawdlife8115 3 жыл бұрын

10 years?

@k.p7931 3 жыл бұрын

That's pretty shocking to be honest man if you still dont know the fundamentals of roofing/spouting.... maybe pick a different career path if you still struggle with the basics lol no hate!!

@briangraham9678 5 жыл бұрын

can you do a video about how to install flashings around a chimney

@jameswinfield4094 5 жыл бұрын

Good Job thanks

@metalroofing7210 3 жыл бұрын

James Winfield Cheers James 😃👍

@bradremin2634 5 жыл бұрын

Also, what are his screws in the right side of his tool belt when he's right handed, instead of reaching around with your left hand to the right side, have your screws in the left pouch, you can work faster and more efficiently

@metalroofing7210 3 жыл бұрын

Brad Remin. Cheers Brad 😀👍

@johnnykay8261 4 жыл бұрын

great vid. Can I ask, does one really have to cut the the last sheet if it fits in line with the barge board as a full sheet, saves on the extra cutting work work

@metalroofing7210 3 жыл бұрын

Johnny Kay Hi Johnny. If the last sheet fits perfectly without having to cut it then that’s great. No cutting required 😊👍

@michaelwilliamson2774 3 жыл бұрын

Does it matter which way up the roof blanket is facing?

@metalroofing7210 3 жыл бұрын

Hi Michael, Yes I would only recommend it done the way I have shown 🤙

@stuckster 2 жыл бұрын

In temperate climates the foil should be on the bottom. In tropical climates it should be on the top.

@latenightdate 2 жыл бұрын

Great video! Is the process any different when installing 100mm insulation blankets, or is it all the same?

@MrKeith1053 3 жыл бұрын

what is the gap distance between the opposing sheets at the top of the ridge? Or how far should the ridge capping cover the sheets ? BTW.. excellent tutorials.

@metalroofing7210 3 жыл бұрын

Thanks Keith. I try to make the gap between the two sheets at the top as minimal as possible- around 20 mm. So that the you get the maximum coverage with the ridge capping

@anthonybutto1925 2 жыл бұрын

Do you deal with foam for weather noise restriction? For in Sydney, students have been trained as building designers (draftmens) at Sydney tafe and architectural designers at Sydney university that foam for weather noise restriction is used. But now I'm left wondering that if dealing with foam, it's a choice for customers who want it or not for I have not seen sub contracters use them. This is just so that I know that in the tech industry, when working for architectural firms, when dealing with two story buildings or high tech buildings, such as, let's say...! So as not to go into too much detail, more than two story buildings in Sydney, on cad software, such as, "computer aided design," and also dealing with customers. If I also choose to pursue my career in structural engineering, I know how to liaise and interact with customers and with expert architects and know on cad software the input detected there is to add to my design project if customers want it. Maybe in Victoria there are different rules and regulations for color bond roofing for it's not in the ABC (Australian building code) as of such or is it just a choice for customers anywhere in Australia. Your feedback is valuable and appreciated for architectural firms and future Australian design homes Thank you for sharing your footage to students and experts and to youtube, "thank you," for the memories.