Splitting Cases, Replacing Crank | Raptor 700 Motor P5

Рет қаралды 52,580

6 жыл бұрын

Walk through of splitting cases and replacing a crankshaft in a Raptor 700
Splitting Cases, Replacing Crank | Raptor Motor P5
I DO NOT RECOMMEND TAPPING IN THE MAIN BEARINGS FROM THE INNER RACE!!! Now that that's out of the way... lol. Here is the step by step process I used to replace the crankshaft in my 2007 Raptor 700R. If you do this yourself, remember to TAKE YOUR TIME... Anyone can do this with the proper tools and patience!
If you enjoyed, please comment, like and subscribe to my channel!
Thank you for watching!
Want to reach me? Email me at..
michaelsabo350@gmail.com
Add me on Facebook and Instagram
Facebook: / atvcrazy91
Instagram: / atvcrazy91
Miscellany Liquid Chalk Markers
Web: miscellanysupplies.com/
Facebook: / miscellany-supplies-39...
Instagram: / miscellany_supplies
Check out Ashley Tarot
Facebook: / ashleytarot
Music is as follows...
Track 1
Music provided by Free Music Tunes
Track: Essence Of Datum - Animal
Link: • Video
Track 2
Music provided by Ethan Maixsell.
Track - Rise
Link to track • Rise - Ethan Meixsell
Track 3
Song: Vindicated
Artist: Ethen Meixsell
Genre: Rock - more of this genre: goo.gl/4iJIms
Mood: dark
source: KZfaq Audio Library
Download this song here for free!
/ audiolibrary_. .
Track 4
Music provided by TeknoAXE.
/ teknoaxe
www.reverbnation.com/teknoaxe
Track - Heavy Metal/Hard Rock
Link to track - • TeknoAXE's Royalty Fre...
Track 5
Music provided by TeknoAXE.
Track - Fuzz Walkabout
Link to track - • Royalty Free Backgroun...
Track 6
Extreme Energy by MusicToday80: / r. . Attribution 3.0 Unported (CC BY 3.0) creativecommons.org/licenses/... Music provided by Free Vibes: goo.gl/NkGhTg

Пікірлер: 104

@MichaelSabo 6 жыл бұрын

I MAKE A ROOKIE MISTAKE IN THIS VIDEO! DO NOT TAP YOUR NEW MAIN BEARING IN FROM THE INNER RACE LIKE I DO IN THIS VIDEO AT 17:40! USE SOMETHING THAT HAS THE SAME CIRCUMFERENCE AS THE OUTER RACE OF THE BEARING! USING YOUR OLD BEARING TO TAP IN THE NEW ONE IS A BETTER OPTION THAN THE SOCKET I USE IN THIS VIDEO. ***You can all rest easy, I am replacing the bearing and tapping it in from the outer race.***

@williame2315 6 жыл бұрын

It’s cool to be able to sit down and watch these long videos like a tv show

@upshiftclutchups665 6 жыл бұрын

ooo a long one, time to get some popcorn

@syzygy3239 3 жыл бұрын

A quick tip for press bearings. Take a can of computer dust spray and turn the can upside down and spray the bearings. Don't spray it onto your hands. Its very cold and will frost burn you. But for a quick freeze it works great.

@LB-qp3rf 6 жыл бұрын

Banger like always👌🤘

@IIKINGLIAM 6 жыл бұрын

It’s so cool how it looks when you take that stuff apart

@ericseifried4414 6 жыл бұрын

Love these videos!!!

@MrToddles12 6 жыл бұрын

Excellent work. Have used that permatex product before on rebuilding a supercharger and it is great stuff!

@qc_cod2030 6 жыл бұрын

I was waiting this video so much i checked everyday to see if there was a new raptor video !!!

@dubsey98 3 жыл бұрын

It was a good example only thing I'd recommend differently is how u installed the main bearing. You should never hit a bearing on the inner race, due to the fact that you can actually create alottt of play and worst case just completely blow the center section or off the outer race! That center section is essentially free floating so by pressing on the outer you are pushing on the main body of the bearing and the center of it will be stress free and will follow the outer wherever it goes. If at all possible I try to use something that will lay perfectly over not only the main bearing but also the inner completely evenly. The old race for instance works great! Good job!

@johnb3231 6 жыл бұрын

Nice work. I bought both of the same tools tu did for 1 motor haven't used them since haha! But they are nice to have.

@Zoomb1kes 3 жыл бұрын

Great work

@redman8745 6 жыл бұрын

Keep up the Boss ass work and watching this video will help me out with one of motors

@MichaelSabo 6 жыл бұрын

Thanks for the love Red Man!

@StupidFastJohn 6 жыл бұрын

As always great video!!! I was cringing when u were hitting the bearing on the inner race though LOL. Cant wait to see her in action! I just picked up an 06 raptor 700, gotta do the carrier bearings on it and then im ready to rip! Keep em coming brother!

@MichaelSabo 6 жыл бұрын

Thanks man! You'll love that Raptor; they're mad torquey.

@StupidFastJohn 6 жыл бұрын

Michael Sabo cant wait!

@kj_frenchies7915 5 жыл бұрын

Just bought a raptor 700 that needs a rebuilt so your videos are going to help a lot thanks.

@MichaelSabo 5 жыл бұрын

Thank you for watching; I'm glad I can help

@jeremyperez8753 3 жыл бұрын

Your the man

@Kbandkb08 6 жыл бұрын

Great video man. Keep up the great work!

@mcarbajal5628 6 жыл бұрын

Trail Raptor I have that same raptor in your profile picture

@Kbandkb08 6 жыл бұрын

M Games I love mine. They are great bikes

@juicer911 3 жыл бұрын

Could you freeze the whole crank and bearing assembly and drop it onto the other side as well. Similar to how you did the bearing only.

@OGKILLa9365 6 жыл бұрын

You should clean the engine cases with a scotch brite wheel on the buffer that you have.

@John-kp1ql 3 жыл бұрын

I have to split the cases on my raptor. I only need to replace the left side case, so can I leave the right side case intact and leave the transmission in? Or are there bolts inside the right side case?

@yansheeold_b9147 6 жыл бұрын

Nice job from paris

@supertedogpriken 5 жыл бұрын

U know that gasket sealer you cleaned of the outside of the engine. the same amount will also get on the inside of the engine and clog the oil screan and get in the bearings. hopefully it does not starv the engine/bearings of oil.

@eduardocervantes3746 5 ай бұрын

Donde compraste tu estractor para los baleros ..

@angelobarrett8086 4 ай бұрын

Did you use the HotRods 4078 crank? I bought my crank brand new and has a small amount of play side to side within the rod. Normal ?

@gersonromero4967 6 жыл бұрын

Fire

@user-qj3ir1xe5d 3 ай бұрын

Where can I buy the tool used at 23minutes and make sure I get the right size almost 100% it’s same size as one in video

@motorcyclejamannow1091 6 жыл бұрын

awesome

@RCMAN23 6 жыл бұрын

Getting the bottom end rebuild kit for my dirtbike next week. And i just finished dont a full motor rebuild on my friends banshee

@MichaelSabo 6 жыл бұрын

That's what's up man!

@kylesmith2071 6 жыл бұрын

I know you have been over the bearing you tapped in. I see that you also know that Hot Rod Cranks have a high failure rate. When this engine explodes you will not know which failure to blame. For everyone, please replace that bearing. That will leave no doubt if the crank fails. Love the videos. Just want to see it done correctly.

@MichaelSabo 6 жыл бұрын

Chris Smith I already ordered another bearing; I am putting it in correctly. Thank you for the feedback.

@DirtbikeNb 6 жыл бұрын

When you install bearings you're supposed to hit the outside of it not the inside

@lmbb20 4 жыл бұрын

Anyone know the bolt size/thread to push the crankshaft out?

@jasonbrody9851 6 жыл бұрын

I was actually thinking about buying a caltric brand battery and since you bought one now I will know if it's a good battery.

@MichaelSabo 6 жыл бұрын

They make good batteries and they're inexpensive. The other one I bought for this raptor went through some torture and it's now in my bike and working great still.

@MK-qv7bq 6 жыл бұрын

Hey man for future reference you may want to try putting your cases in the oven for about 30 minutes at 400* farenheit that will allow them to expand quite a bit. Couple that method with bearings and your crank in the freezer and youll sail smooth. Just be careful to not burn yourself!!!

@MK-qv7bq 6 жыл бұрын

I wrote this up about half way through the video and then saw everything slid into place like communism in Europe. Glad it all went together easy 👌

@MichaelSabo 6 жыл бұрын

Sketchy Industries "like communism in europe" 😂😂😂 I'm dying man hahaha thank you

@MK-qv7bq 6 жыл бұрын

Michael Sabo much abliged to make a fellow backyard engine builder laugh. Cant wait for the next vid.

@Rscmgw23 6 жыл бұрын

X2 on the oven method.... I do 30mins at 225F and freeze the bearings over night.....They will drop right in. Same thing for the crank.

@quadbikesr314 6 жыл бұрын

Great vid. Once you get done clean the raptor up and get it all nice and get ss rim center caps. Make the next project a 450r or 400ex?

@mikelwmc 6 жыл бұрын

Shouldn't have hit that iner race installing that new bearing. Eek

@MichaelSabo 6 жыл бұрын

Rookie mistake on my part; I usually use the old bearing to tap in the new one.

@bdogjr7779 6 жыл бұрын

Awesome Mike 《☆》kudos for filming this task Bro. I see peeps are already roasting Your nads about bearing installation. Good rule of thumb is never transmit the load thru the bearing so You will be putting pressure on whichever race is contacting the mating part. If You don't have the right size socket then a hammer & brass drift punch is acceptable with light taps around the circumference. Sometimes a brass punch is too wide so switch to a steel one that is small enough. For heating I use an electric heat gun & monitor the temp with a laser targeting thermometer that You can get for $20 at Harbor freight. Good luck with it Man. Always good content on Your channel & that one song will be in My head for a while. Daahh Daaahh Dattt thuukka thukkaa dahh dajjj ☻

@gabyg00gletv18 6 жыл бұрын

You going to run more compression? Planning on dropping a bigger cam?

@julianojanuario6383 6 жыл бұрын

Always use grill or oven to remove and install bearings. They drop right out & in at 220 degrees. Torch can warp the case.

@julianojanuario6383 6 жыл бұрын

Also never torch a bearing. Find a socket that fits snug inside the inner race of the bearing, torch the socket for a while then hold it inside the inner race of the bearing for a couple minutes. The crank will slip right in the bearing, won’t have to pull the cases together.

@facundobaso194 5 жыл бұрын

Where did you buy your crankshaft from ?

@ethantreadaway7169 2 жыл бұрын

I'm gonna be doing this soon I'm nervous about the crank shaft balancers 👀

@chrisaskme811 11 ай бұрын

Just don’t reinstall them

@raphaelsantiago5612 5 жыл бұрын

Hey I was wondering if u could Point me in the right direction. I have a raptor 700. 2017 I’m hearing a small ticking noise ever so often. What’s could that be ??

@darrylmc9944 5 жыл бұрын

Raphael Santiago if it’s like mine it’s the timing chain slapping around, do a check on your auto tensioner , see if it’s maxed out, I hear a lot of bad news about raptor timing chains when they hit higher mileage

@darrylmc9944 5 жыл бұрын

Hi mike, I’m in Nova Scotia Canada, and me and my buddies watched most of your videos as we are a distance from a decent repair shop, and we’re broke ass running on a serious budget. I’m in middle of installing a new cylinder and piston kit , it’s a cylinder works jug with a matching vertex piston set, while doing installation I noticed my timing chain was kinked and the auto tensioner was maxed, I guess that explains the racquet I was hearing, so I’m putting in a new timing chain, I’m noticing my piston rod can move ever so slightly side to side , bout a half mill each direction, is this normal, it’s not sloppy just side to side ...any advice is appreciated

@lmbb20 4 жыл бұрын

A little side to side is ok, up and down is not ok

@brandonquenneville7330 6 жыл бұрын

Cool video. I think his only method on hand was to pound the inner race on the Case bearing.

@MichaelSabo 6 жыл бұрын

After watching my own video I feel like an idiot; I usually use the old bearing to tap in the new one. I think this one was still okay though.

@Rscmgw23 6 жыл бұрын

The craptor is going to become the exploder haha. Hopefully it doesn't take out the engine cases when it goes. I just did a trx450r, left and right center cases were over $250each bare cases.

@brandonquenneville7330 6 жыл бұрын

I agree*

@salinasracing8314 6 жыл бұрын

Banger...,,, do a 4 mil on your banshee please i want to do a 4 mil pump gas drag bike

@MichaelSabo 6 жыл бұрын

That's what's coming man!

@salinasracing8314 6 жыл бұрын

Thanks man !!

@johndoe-ly8jt 3 жыл бұрын

You put the case in the freezer and the bearings fall out pretty easy.

@tntactics 5 жыл бұрын

What happened that caused the rebuild?

@MichaelSabo 5 жыл бұрын

Bought the quad with a bad crank

@tntactics 5 жыл бұрын

Michael Sabo so how can i tell if the bike have a bad crank??

@jenniferclark1323 5 жыл бұрын

How much u paid for the new crank

@johnnickle4843 6 жыл бұрын

24.36 crack in case on crank surface??

@brandonquenneville7330 6 жыл бұрын

noo

@johnbowen2963 5 жыл бұрын

ALL WAYS DRIVE A BEARING IN ON THE OUTER RACE, NEVERRRRRRRRRRRR HIT INNER RACE.

@MichaelSabo 5 жыл бұрын

Little late bro 😂😂😂

@connormc302 6 жыл бұрын

@littleman6969 6 жыл бұрын

First

@Stoshua.81 6 жыл бұрын

Guarantee that crank bearing will have play never hit the inner race or use a hammer on bearings they won't last

@MichaelSabo 6 жыл бұрын

Stoshua already been covered and replaced. Read the pinned comment.

@Stoshua.81 6 жыл бұрын

Michael Sabo Nice

@nicholasfinamore8916 6 жыл бұрын

Hello

@davinlyda1461 6 жыл бұрын

You should have cleaned up all the aluminum while you had it apart.

@jaimecastro1932 4 жыл бұрын

I need you to rebuild my engine

@zestifyy1053 6 жыл бұрын

Why don’t you chill the bearings when you try to remove them they just slide out .

@jstephens1193 5 жыл бұрын

Is she still running?

@MichaelSabo 5 жыл бұрын

Yea man, I pulled her out of the shed last week and she fired right up 🤘

@beerbellyracing133 7 ай бұрын

@MichaelSabo still running?

@onewheelwayliam7544 6 жыл бұрын

bfh? big fuking hammer?

@MichaelSabo 6 жыл бұрын

Yea haha

@johng1061 6 жыл бұрын

omg the cringe no matter how light you hit the inner race of the bearing its junk now i guarantee it will go bad again in no time

@MichaelSabo 6 жыл бұрын

I know, that's why I recommend against it; I should have used the old bearing to tap it in. But in reality, I don't think the bearing is bad from light taps. It will be a test; if it blows, you'll know about it and I'll re-do it.

@MichaelSabo 6 жыл бұрын

I made a comment and pinned it at the top of the list because this is bothering me so much.

@Rscmgw23 6 жыл бұрын

Hopefully you plan on replacing that bearing haha. The worst possible thing you can do to a bearing is hammer on the inner race. As soon as I seen this I paused and hit the comment section. I wouldn't run that engine after hammering on an inner race let alone a main crank bearing. I know you wanna do it right brotha, right thing to do would be replace that bearing. Either way, still enjoying the projects bud

@MichaelSabo 6 жыл бұрын

This is my busting face I know man; I'm pretty pissed at myself right now especially because I know better. I'm not sure if I'm going to try running it or not.

@Rscmgw23 6 жыл бұрын

Michael Sabo... if something goes out at a high rpm and you put your rod through the cases your going to be real pissed haha