Raptor 700 MOTOR PART 2 | Pulling The Motor!!!

Рет қаралды 23,607

6 жыл бұрын

Is it easy to pull the engine from a Raptor 700?
Raptor 700 MOTOR PART 1 | Plan and Breakdown
Phase two is complete! Ripped this motor out likitysplit! Here is the process I followed to pull my motor, keep in mind this is my way, NOT the via the service manual! Get ready for part three where I'll be pulling the head, cylinder and ordering top end parts!
If you enjoyed, please comment, like and subscribe to my channel!
Thank you for watching!
Want to reach me? Email me at..
michaelsabo350@gmail.com
Add me on Facebook and Instagram
Facebook: / atvcrazy91
Instagram: / atvcrazy91
Miscellany Liquid Chalk Markers
Web: miscellanysupplies.com/
Facebook: / miscellany-supplies-39...
Instagram: / miscellany_supplies
Check out Ashley Tarot
Facebook: / ashleytarot
Music is as follows...
Track 1
Music Credit: OurMusicBox (Jay Man) Track Name: "Tough Streets" Music By: Jay Man @ ourmusicbox.com/ Official "OurMusicBox" KZfaq Channel: / ourmusicbox License for commercial use: Creative Commons Attribution 4.0 International (CC BY 4.0) creativecommons.org/licenses/... Music promoted by NCM goo.gl/fh3rEJ
Track 2
Music provided by Free Songs To Use.
Track - Speo - Stride
Link to track - • Speo - Stride
Track 3
Music provided by TeknoAXE.
/ teknoaxe
www.reverbnation.com/teknoaxe
Track - Heavy Metal/Hard Rock
Link to track - • TeknoAXE's Royalty Fre...
Track 4
Music provided by TeknoAXE.
Track - Fuzz Walkabout
Link to track - • Royalty Free Backgroun...
Track 5
Music provided by Teknoaxe.
Track - Like a Ton of Bricks -- Industrial/Downtempo
Link to track - • Like a Ton of Bricks -...
Track 6
Music provided by Cramoki.
Track - Take U There
Link to track - • Cramoki - Take U There

Пікірлер: 56

@DoRC 5 жыл бұрын

Generally coolant passages in intakes are designed to keep the intake warm both helping atomize fuel and preventing the intake from icing up.

@TerrickHarden 6 жыл бұрын

I'm late as usual but those were some bad ass bolt cutters.

@MichaelSabo 6 жыл бұрын

Haha, no worries man! I hope you're doing well. I still had to squeeze hard as hell to snap the chain.

@jasonbrody9851 6 жыл бұрын

Yayyy! The raptor is back! Its ashamed the banshee blew up but I've never had good luck out of Chinese parts

@hectortorres3052 6 жыл бұрын

Wowie here we go agian love your vids man keep up the good work f

@thomaspayne987 6 жыл бұрын

Great video man! Awesome inspiration. Im now working on a new project 400ex! My banshee is still running strong nock on wood...i got the chinese cyl with weisco prolites...ill be happy once i surpass the 9.9 hr mark...im at about 7.2 hrs now...cant wait to see this raptor thump

@joeloyd56 Жыл бұрын

I appreciate the content.

@33boblong 6 жыл бұрын

Great video Michael

@bdogjr7779 6 жыл бұрын

Awesome Mike 🤠 Like a Pro ☻

@gabyg00gletv18 6 жыл бұрын

Good job💪🏾

@vistkri 6 жыл бұрын

Use a scotch brite pad and clean up the swing arm bolt, remember to grease it up before you put it back in. Now when the swing arm is free if I was you I would press some new fresh grease in the swing arm bearings as well:)

@MichaelSabo 6 жыл бұрын

Great idea!

@vistkri 6 жыл бұрын

«I dont want to wait to christmas to get that thing» ahahahaha lmaooo😂😂

@huntertownsend9515 6 жыл бұрын

I’ve been watching this since you first started and I have to say I can’t wait till that beast is running. I’m thinking about getting a raptor

@pcostyle11 6 жыл бұрын

GrimReaper_068 get a banshee ! Both totally different but so fun

@MichaelSabo 6 жыл бұрын

Both are awesome! And thank you for following the build!

@gersonromero4967 6 жыл бұрын

I been waiting since you post it on Facebook

@imperfectrc8735 6 жыл бұрын

Love your vids man keep the banshee tho

@shawnyoung3593 6 жыл бұрын

That was pretty tight😂 u where so serious lol

@wesley-yz2dn 6 жыл бұрын

wow nice man please upload daily

@User37621 4 жыл бұрын

Love the vids.. what made you determine the crankshaft needed to be replaced ?

@imperfectrc8735 6 жыл бұрын

I am rebuilding my banshee you were inspiration

@MichaelSabo 6 жыл бұрын

Awesome man! I am glad I inspired you!

@robertmason62 6 жыл бұрын

Sometimes I forget those are brand new tires

@that250fguy4 6 жыл бұрын

For the piston I would go and get a vertex piston I had all wesico in all my bikes and then I put a vertex in my 250 and you could definitely feel a little more power sky te vertex and they’re a great piston from everyone I know that used them agrees

@MichaelSabo 6 жыл бұрын

Yes, Vertex is great! I ordered a CP though.

@danielbarker160 2 жыл бұрын

@@MichaelSabo ?

@shadowis350 3 жыл бұрын

What tools did you use to get the swing arm bolt loose

@anthonyk6265 2 жыл бұрын

I'm just starting the same process approximately how long did it take you hour wise to do this you think seems like I'm on the same skill level as you LOL good videos

@limitlesshorsepower4514 6 жыл бұрын

happy 4th y'all

@jeremyperez8753 4 жыл бұрын

How do you know or how can you tell when the crank is bad?

@garyhamilton4533 4 жыл бұрын

Hey Mike how’d you know the crank was bad?

@evanhord3038 6 жыл бұрын

You should get some impact sockets before you have to pick a chrome one out of yourself

@MichaelSabo 6 жыл бұрын

You are 100% correct. I've already blown a few apart. As the money comes, so will the tools.

@bran.450 6 жыл бұрын

You should have took the top end off first then pulled the motor it would have been easier so when you put it back it put the bottom end it the frame then put the top end together on the frame it’ll be a lot easier

@MichaelSabo 6 жыл бұрын

I may do this. I like doing the motor outside of the frame though. Thanks for the tip!

@robertmason62 6 жыл бұрын

And grab bar

@DoRC 5 жыл бұрын

It's a really bad idea to pound on the end of a threaded rod with something that's steel. Get a brass rod for those kinds of jobs. It's way to easy to mushroom the end of the rod and ruin the threads.

@not_max8111 2 жыл бұрын

my man cant wait till you find out what snap-on is.

@not_max8111 2 жыл бұрын

this is a joke

@upshiftclutchups665 6 жыл бұрын

If you bought the crank from Rocky mountain atv it would have come with every bearing and seal and gasket for the bottom and top end

@upshiftclutchups665 6 жыл бұрын

For my trx450r for the kit cost like 450

@MichaelSabo 6 жыл бұрын

I checked them out and they have great deals. I saved about 50 bucks buying separately.

@huntertownsend9515 6 жыл бұрын

First comment

@g_family1123 6 жыл бұрын

So what you doing now you going to strip it to frame and get it all powder coated? Only like 5 min into vid btw lol

@MichaelSabo 6 жыл бұрын

Not this time around, just the motor and then I'm throwing her back together!

@cryptixwisdom7455 6 жыл бұрын

Oil. Aka water

@imperfectrc8735 6 жыл бұрын

14th comment

@upshiftclutchups665 6 жыл бұрын

Oh and every time you get a new chain u should always get new sprockets

@MichaelSabo 6 жыл бұрын

I might go ahead and do this, I was looking at the wear on my sprockets.

@johnb3231 6 жыл бұрын

Thought for sure the swing arm bolt was gonna screw you. Took me like 5 hours to get mine out on the banshee. Do yourself a favor coat that thing in never seez when you put it back in

@MichaelSabo 6 жыл бұрын

Oh my god dude.... they can be a nightmare. Definitely a great idea on the antiseize.