Thanks mate!

Thank you so much!

I agree! I have recently learned of a partially completed Francis Turbine system that will be completed in the Spring after the snows melt. I’m looking forward to filming it and I may do a video about the work done so far with footage that the workers shot. Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system as well. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Like, Subscribe, and Share - It helps the channel grow. Thanks for watching this latest episode!

Wow! A devoted viewer. I’m very glad you are finding it valuable. There’s more to come and it won’t be so long a wait. Thx for watching!

Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system and travelling about documenting others’ systems. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Like, Subscribe, and Share - It helps the channel grow. Thanks for watching this latest episode!

@@mrhydrohead Wow, sorry to hear about your health issue. Glad that you're on the mend!!! Great videos and very enjoyable. thank you!

@@jerryzedler1440 Thank YOU!

@@mrhydrohead very sorry to hear about the health issues, but at the same time very relieved you are doing much better now. Your video series about your hydro setup truly is one of the hidden gems on KZfaq, I rewatch it regularly. I’m very much looking forward to your new videos. Take care!

@@jw106 I have recently learned of a partially completed Francis Turbine system that will be completed in the Spring after the snows melt. I’m looking forward to filming it and I may do a video about the work done so far with footage that the workers shot. Thanks for watching

Yeah, it was a rough recovery road and I'm still walking it. Thx for your comment and watching. Two projects I'm focusing on just now.

Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system and travelling about documenting others’ systems. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Like, Subscribe, and Share - It helps the channel grow. Thanks for watching this latest episode!

I have recently learned of a partially completed Francis Turbine system that will be completed in the Spring after the snows melt. I’m looking forward to filming it and I may do a video about the work done so far with footage that the workers shot. Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system as well. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Like, Subscribe, and Share - It helps the channel grow. Thanks for watching this latest episode!

@@mrhydrohead Damn...sepsis is really serious...so glad you are doing better now! I look forward to future videos of your system and the others. Take care and keep getting better!

Hey thanks for the kind comment. Small scale micro hydro can be applied in far more situations than most people realize. I attempt to show a variety of those very unique situations on the channel. And thanks for watching

I have recently learned of a partially completed Francis Turbine system that will be completed in the Spring after the snows melt. I’m looking forward to filming it and I may do a video about the work done so far with footage that the workers shot. Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system as well. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Like, Subscribe, and Share - It helps the channel grow. Thanks for watching this latest episode!

I appreciate that! Thx for watching

Thx again

Synchonicity! I have recently learned of a partially completed Francis Turbine system that will be completed in the Spring after the snows melt. I’m looking forward to filming it and I may do a video about the work done so far with footage that the workers shot. Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system as well. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Thanks for watching this latest episode!

@@mrhydrohead my Uncle has that sepsis isnt that rare and odd youre the second person ive heard had it..As fae as the virus the media made a mountain out of a molehill in most cases. Our entire family made it to the other side just fine and one of my family members has congestive heart failure Mayne God was on our side on this one I'm not a Dr so it could effect others differently anyway. Be well my friend FYI if you want to add music in the background as a filler in your upcoming videos please do so. This is your art not theirs you can't please everyone all of the time.

Thank you for the kind words. Congratulations on the PV system. Another video coming up in honor of Earth Day 🌎

More to come! I have recently learned of a partially completed Francis Turbine system that will be completed in the Spring after the snows melt. I’m looking forward to filming it and I may do a video about the work done so far with footage that the workers shot. Thanks for watching

As a former private pilot I agree with you. Congrats on having a functioning system. Nice, isn’t it!? Over the 27 years my equipment has been running, we’ve generated over 518,000 kWh and it still just keeps spinning. 375 megawatts of that have come since moving the system to our creek and turn it on in 2015. This video you commented on isn’t mine, I only documented this one. My system is summarized here: kzfaq.info/sun/PLtTypVpmDd-vkT9bJQkXw4I1t0e_4jMYA&si=sTuj5ibEKTzJm73Q KZfaq only seems to promote the most recent videos, so I guess l need to do an update to point people to the older videos. Thanks for watching.

@@mrhydrohead I will check it out. Yes, hydro is great, nothing beats gravity! PV is a bit more hassle free but not near as satisfying for some reason. I have both, and never pay a bill other than my connection fee;. My mountain stream varies so much I designed it around the lower part of the year/flow, so it's small but consistent as in keeping the supply line full.

Hey, thanks! Hope you're doing well in SF. Talk soon, I'll call you

Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system and travelling about documenting others’ systems. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Like, Subscribe, and Share - It helps the channel grow. Thanks for watching this latest episode!

So sorry to know that but thank God you are doing great now. Wish you all the best

I think so too! It has been fun to document other people's systems. Thanks for watching!

Glad it was helpful! Thanks for watching! AND for the SUPER THANKS

Synchonicity! I have recently learned of a partially completed Francis Turbine system that will be completed in the Spring after the snows melt. I’m looking forward to filming it and I may do a video about the work done so far with footage that the workers shot. Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system as well. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Thanks for watching this latest episode!

@@mrhydrohead Yeah I had read about your health issue in others comments but didnt know how to say that I am very happy you are recovering. I also didn't say that I have watched all your videos 2x. My interest is how the stream that you get water from evolves as the drought breaks up and how much erosion occurs. The erosion you have from the the yearly run off there is crazy.

@@walterhiegel3020 Yeah the erosion is nuts! I will be posting an update to show what occurred in my absence on our system. I'm not sure I have enough footage to make it interesting as I'm relying mostly on footage my contractor shot when I was in hospital, but I'm going to try. Footage from an upcoming Francis Turbine video shows a great design of intake however given my progressing erosion I'm uncertain if the cost to build and install something similar would work. As the blind man once said "we shall see"

More to come! I have recently learned of a partially completed Francis Turbine system that will be completed in the Spring after the snows melt. I’m looking forward to filming it and I may do a video about the work done so far with footage that the workers shot. Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system as well. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Thanks for watching this latest episode!

@@mrhydrohead I love hydro power. Our family operates two plants. One Francis and one a Kaplan. 400 kW total. It’s interesting to see smaller hydro making sense as well. I wish I had a creek by my house but I can’t have it all haha. Thank you.

@@Mike-kr5dn 400kW!!! Is that direct output or kWh/day? Either way thats a s#*tload of juice. Hope you are grid tied as I can't imagine how you could put that much to good use. Where are the systems located? And how long in service?

@@mrhydrohead It’s 400kW direct output. It’s far it’s in Czech Republic. The Francis turbines are actually 2 and are from 1920, renovated and working fine with just a new generator and small repairs to the runners(new coating). The Kaplan (from 2005) is running on the waste water coming from the Francis turbines, so the water which is diverted from a small river is used twice. Yes it is a grid tie system, we produce around 1.5 GWh a year or 1.5 million kWh.

I've never heard of anything like that. Glad to share. Thanks for watching!

Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system and travelling about documenting others’ systems. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Like, Subscribe, and Share - It helps the channel grow. Thanks for watching this latest episode!

@@mrhydrohead I'm sure glad you managed to dodge that one.

@@richysee Me TOO!!! I joke saying MrHydrohead became MrHospitalBed.

@@mrhydrohead Been there and it's good to get back home to familiar surroundings 😅

Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system and travelling about documenting others’ systems. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Like, Subscribe, and Share - It helps the channel grow. Thanks for watching this latest episode!

Thx for watching!

Thx for watching!

We consistently make 163-173kWh/day (6800-7200w) with the Winter flow setting and around 100-108kWh in the other seasons at a lower flow setting because we don’t need as much. The load controller is set to have a 4500w dump load into either hot water heater or baseboards in spring through fall and that is where we run consistently. The generator is a 10 kW unit so we’re never pulling the full capacity from it. I bought it way back in 1996 so prices are far higher today. Lima that mfg it was bought out years ago by Marathon Electric which I’ve just now seen got bought out by Regal Rexnord. This is a link for similar generators, but they don’t list their prices upon first glance. www.regalrexnord.com/brands/Marathon-Generators/Products/lima-mac Hope this is helpful. Thx for watching more to come before long.

Hey thanks for the good wishes. As you might have seen in earlier comments, I spent 13 months in 2020-1 away from home in hospital/rehab for a staph sepsis infection that came from dirty leads on a pacemaker install. I still have debilitations from the ordeal, but not as bad as the alternative would have been. 60% of people die from sepsis. Oh well, it is what it is. More vids to come. Thanks for watching!

Glad you enjoyed it. I have recently learned of a partially completed Francis Turbine system that will be completed in the Spring after the snows melt. I’m looking forward to filming it and I may do a video about the work done so far with footage that the workers shot. Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system as well. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Like, Subscribe, and Share - It helps the channel grow. Thanks for watching this latest episode!

Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system and travelling about documenting others’ systems. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Like, Subscribe, and Share - It helps the channel grow. Thanks for watching this latest episode!

@@mrhydrohead Hey mate, sorry to hear about your health, that's no good at all. As you say, sepsis can be very bad news. Hope you're on the mend for good now. Great to hear your micro at home is still cranking :) Cheers Dan

I forget what the range of power production is for mini vs micro, but I've read it defined somewhere. sorry for the slow response. Thx for watching!

That would be cool. Yes, the unregulated wild AC rectified to DC and then synchronized to grid is something I hadn't yet seen first hand. Thx for watching

Interesting part of this system is that the owner got a few grants that ended up with their cost out of pocket being about $15k. And the 6 months operation of the system every year creates enough credits produced to pay off their full yearly power bill. I've been told the system is nearly fully automatic and requires minimal maintenance. I agree on minimally invasive systems. Living with my own system is truly a joy. Thx for watching!

If there is moving water, there is a way to harness at least some power. Question is whether it is substantial enough to justify the cost and effort. Thx for watching just the same!

@@mrhydrohead Yeah, problem is there isn't a steady supply of water flow except during hurricane season. Altho, that's when grid supply could become iffy :P

I think waterwheel and pulleys system can work.

@@thatsawesome2060 Only if there's enough flow. Oddly, after posting the previous 2 comments, it poured here for 2 days. And there's cargo hold full of water I could be tapping into. Plenty of flow for the water wheel idea. Problem is, we only get this amount of rain about 5 times a year. All the other times we might only get a couple inches, which isn't enough to raise the water level/flow

Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system and travelling about documenting others’ systems. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Like, Subscribe, and Share - It helps the channel grow. Thanks for watching this latest episode!

Great tip! Thx for watching!

I'd have probably monolithic poured the whole building to a 6 inch thickness. Virtually everything-proof in that environment.

That sounds like a cool dream. I've thought about aquaponics for some self sufficiency but my initial plan got sidetracked in 2020 when I landed in hospital/rehab for 13 months. Keep looking and don't give up. Long term you could be greatly rewarded. Best of luck to you. ; )

@@mrhydrohead thanks same to you. Keep the vids coming your very knowledgeable. I enjoy watching

It took me a while to find that in my footage. Dayton Washdown Duty Motor Model 5XAU7. HP 5/3. RPM 1750/1470. Voltage 208-230/190. Thx for Watching. Hope this helps. Other data is on the tag, but I imagine you can find data with Model#

@@mrhydrohead thank you sir!

Most welcome!

You're welcome! Thx for Watching!

They have an allotment of water that is used for irrigating their fields. Whatever portion they need for irrigating their fields they of course use, but their water right allotment exceeds that need and they use any remainder for harnessing power. That extra water then continues on to the next user down the line. Thx for watching!

I didn't design the system, but it might possible with an Electronic Load Controller. I think the intention was to create a low maintenance system that feeds the grid. I'm not sure they use the power directly, but instead use it as credits to lower there power bill.

Yes, it's great isn't it. Thanks for watching

The spent water enters an irrigation ditch which then continues on for lower elevation ranches to use. Thx for watching!

That is true, but this system effectively uses the grid as its battery by spinning their meter backwards and thereby lowering the utility bill. This is not uncommon with solar systems as well. It also avoids the maintenance and replacement headaches of batteries. Thanks for watching.

I will try to do that. Its a good idea in that the majority of the world works metric. I have recently learned of a partially completed Francis Turbine system that will be completed in the Spring after the snows melt. I’m looking forward to filming it and I may do a video about the work done so far with footage that the workers shot. Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system as well. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Thanks for watching this latest episode!

It would be great to get everyone thinking in the same units so that it is easier to communicate with each other.

I don't own this particular system so I can't comment on maintenance, but my own system showcased on the majority of my MrHydrohead channel has run consistently for 27+ years with nearly 0 maintenance. In capital payback you have to factor in whether the property is off grid and how much it would cost to run power lines in as a comparison. The system we own initially cost $25k in 1996 when power lines would have run ~$140k to bring in added to the resulting monthly bills. Our redesign was about an additional $55k vs ~$250-300k to run lines in at that time in 2013 and our redesign nearly quintupled our power generation. This system runs on irrigation water and part of the owners motivation was to utilize the full measure of their water rights so as not to lose them. She also was able to get grants to install the system. There are no batteries to maintain and the utility connection effectively is used as a battery. Rebate rates with the utility power meter running backwards vary widely depending on state rules. With it this system is basically a net zero utility cost over the years total bills. All that being said, any micro hydro setup is costly as you are paying for all future power to be generated up front, so the longer you operate it the better the deal. All the more reason to use high quality components. Thanks for watching!

@@mrhydrohead Thanks for the detailed response. It makes sense of course if you are starting up as not connected to the grid because the system more than offsets the connection costs. If you are connected to start with then I guess you'll have to do a lot of maths to determine financial feasibility of building such a system. It will take a lot of years of grid cost savings to pay back ca $50K installation cost. Depends on your annual power consumption and future plans. Anyways, thatnks again for the response.

Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system and travelling about documenting others’ systems. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Like, Subscribe, and Share - It helps the channel grow. Thanks for watching this latest episode!

@@mrhydrohead Glad you're ok now. Your videos are the reason I got into mechanical engineering, and I am currently designing two small hydro electric plants. Cheers!

@@ilijasulc2247 Wow THAT is so Cool! I think that's the best compliment I've ever received on the channel. It makes me very happy to hear.

Its great to be able to post a new video. I suffered a serious health setback that nearly killed me and I’ve been in recovery mode since April 2020. Not Covid thank god. Staph Sepsis, highly lethal. Doing better now and looking forward to doing an update on our own system and travelling about documenting others’ systems. Our Micro Hydro continues to chug along providing about 170kWh/day with our Winter settings. Like, Subscribe, and Share - It helps the channel grow. Thanks for watching this latest episode!

@@mrhydrohead Glad to hear you made it out on the other side man!

Each of the turbines has 4 feed pipes of the same dimension, 8 total between the two turbines. Each of them is about 1.5-2” diameter. It’s true that the combined cross sectional dimension of those 8 is likely smaller than that of the feed manifold. However, the short length of those 8 doesn’t reduce the pressure appreciably via pipe friction, if that is your concern. Also the diameter of each pipe is considerably larger than the largest nozzle which could be attached at the end of the feed pipes to drive the Turgo Turbines. Hope this helps. Thanks for watching!

I don't own this system, so I don't know how much the total system cost. Even if I did provide cost figures, it would not be of much benefit as each system is unique to the chosen site and costs can vary widely depending on numerous factors. First there is the potential power available at the particular site which dictates if the desired use of that power is practical. Who will design the system? What will be the best equipment and materials available to meet the unique requirements of the most beneficial and practical design? Then there are expenses involved in acquiring water rights which are likely different in each state or country depending on a pro se (self applied) application or hiring lawyer to work on them. Who will do the labor to install the system? Is it your own sweat equity, friends that can help, or hired labor and at what rate? How much time will it take to install? What materials can be accessed? Reused or new pipe, copper or aluminum wire? How long a length of wire? What building(s) will house the equipment? What transformers, batteries, load regulators, power shunts, or utility net metering are available and/or appropriate to the particular site? All of theses factors can add to the costs and it would be naive of me to present a one size fits all price. One must be clear that installing a system is creating an asset which would likely provide power for a lifetime. Can it be financed over time and does that cost make economic sense when compared to running utility lines to an off grid property? Will a local utility be willing to purchase excess power and at what rate? Undertaking a project of this size is not for the faint of heart. It IS a large commitment both financially and in effort and time. My first system (1.5kw) which I own and documented on this channel cost ~$25k and was installed in the mid 90’s. Redesigning and moving the same equipment to a more reliable water source was also documented on my channel and took place between 2013-2015 and added another ~$55k but boosted the useable power by a factor of 5 to 7.5kw. WHEN a project occurs is also a factor governing cost. Inflation impacts everything involved and the fact that I intend these videos to remain on the internet for years to come and provide some clear eyed guidance to people that are serious about their own intentions, this dictates that I not mislead them with cost estimates willynilly. Sorry to go on and on here. I know the system in this video was funded with the aid of grants. Thanks for watching and for your comment.

The property owner has had the irrigation water right for decades. The water they don't use for irrigation flows on to the next lower elevation property as it always has. The benefit of utilizing that flow provides power to the grid and credits offset costs for power in the months when irrigation water is shut down. I agree that the general population is not mindful of how water is a limited resource and often lacks an attitude of conservation. Thx for watching!

I never did any math by looking at the displays and the numbers provided. Seems like you did. Something to remember about this system is that it only runs during the irrigation season which means it would greatly decrease the average kW output. The system also likely produces less power whenever the irrigation turrets are operating as the flow would be greatly reduced. Of course the solenoid design is programmed to maintain pressure in the line by shutting down nozzles at that time. Sorry for the slow answer I've been focused on other things.

@@mrhydrohead all good points, I've just watched your latest upload. I appreciate your time responding, keep up the good work, it is an asset and is inspirational.

Not sure I understand your question. Pressure occurs in a penstock due to gravity. For each 2.31 ft of drop 1 psi occurs. That is for static non moving water and is called static pressure. Pipe friction upon moving water would reduce that and that is known as active pressure. Hope this answers your question. Thx for watching!

หากคุณกำลังมองหากังหัน นี่คือผู้ผลิต: www.hipowerhydro.com/ ฉันไม่คิดว่าพวกเขาจะเข้าใจภาษาไทยและมันซับซ้อนกว่าการซื้อกังหัน แต่ฉันหวังว่านี่จะตอบคำถามของคุณ

I wasn't around for the construction of the system, but I'm sure it was all done to code. It had to be with so many agencies involved. Sorry I don't know the particulars of the specific grounding. Thx for watching!

@@mrhydrohead I’m from the UK and just wondering how you do it in the US, it’s a great video, and interesting to get an explanation of how it’s setup. The video’s are alway so well made, hope to see more soon!

@@Helm971 I've been speaking with the designer of this system and he has a Francis Turbine system nearing completion after the snows thaw out. Planning on doing that one and getting an update on ours here in between. So, more to come...

@Jon on the two boxes we see opened, both have visible ground bus bars. The second controller box with the caps even has a ground sticker under the bus. As an aside, being that is is a mixed system with AC and DC, there are some engineering considerations regarding grounding that differ on a case to case basis because of potential available DC fault current.

Could you please be more specific as to what you mean by “the detail single-line diagram”. I don’t understand what you are asking for.

@@mrhydrohead It also called electrical line diagram, This will give me a clearer picture of the whole architecture.

@@tequilasoda3744 I have asked the designer if he can provide that. If so, there is no way to post it here. If I receive it, I will need your email address to get it to you. If you could send it to me at MrHydrohead@gmail.com that helps.

I have what you’ve requested but have no way to send it to you without your email address

I'm sorry I don't have all the answers to give you. It is a system which the Designer and Contractor allowed me to film. I don't own the property and only visited the site once. Some of the information is within the video, but not all.

@@mrhydrohead Thanks for the reply.

It isn’t MY system as I only documented the project and don’t own it. With the costs of materials and labor I imagine it is in excess of $100k although I was not made privy to a budget. Thx for watching

Coanda [ kaw-ahn-da ], never looked it up till now

????

I was fortunate to plant roughly 100k trees as a tree planter in the northwest when I first got out of college. A great time and I couldn’t agree more. Thanks for watching

Is there a question in that