Looks great. Nice build video !

Thank you for doing this video - I’ve really enjoyed your videos; in particular, your ability to explain complex topics. I have a Blade 230S V2 and have been try to learn without using SAFE/self leveling. My 230 seems just too difficult to learn on - even with tame pitch and throttle curves. So before giving up, I wanted to try something new and a bit larger. Your videos with your Grandpa Flying the Blade Fusion 360 Smart, Goosky S2 Legend, and the newer RS4 have given me motivation to consider something new. I want to get a heli that will allow me to learn and grow!. I would appreciate your expert advice on my next step: Should I repair my 230S and keep it until I can do basic flying - without SAFE or try something new? Of the Blade Fusion 360 and Goosky legend S2 - which one would you recommend? I like the Blade 360 because it runs on 3S, is belt driven tail, and your review shows its very tame - plus I have a DX8 radio. I like the RS4, in particular, because of your World Class build instructional videos! However, it's a bit out of my price range and absolutely beyond my flying skills. Thanks

I need to get the micro heli swash for my 230,,I'm actually running a Mico heli one from the old sr ..the sr one is smaller but still fits the main shaft and I really liked how it performed made it turn tighter ,,but it was never met to be a long term thing for it ,I was always going to order one..I had it laying around so I used it

I have an old 230 first release and it never acted right anytime I powered it up. I need to get it out again and see what the problem is. I didn’t know enough when I bought it to be able to assess why it behaved so erratic.

Thanks for sharing. This is probably a dumb question but can I fit the stock orange canopy on the carbon frame?

Are you using a nine tooth pinion on that 300x motor? I have a ten on mine. My tail doesn’t hold under hard collective, any tips on setup ? Thanks for all the videos

Where did you get the servos and servo arms?

FYI for next time on the servo wire cleanup, each servo can take a couple inches of wire back inside its own case. 😉

This might sound like a dumb question: I am using my old 230s SMART ESC (SPMXAE1020) and with the larger motor and IKON2 micro. Is that ESC going to work or is it only set up to be used for a stock 230S SMART configuration?

So you got a v2 esc?

@Jeff I sent you an email with some images of a 3d printed bracket/shelf I made for the ESC. It gives ya lots of room to put the ESC in without the wires rubbing against the larger motor. Just thought ya would be interested.

Yeh my local store is doing 3 for 88gbp plus you get the 3x JR - i think there jst connectors, so about 27gbp each! What do you think to the x12 kts, 33gbp, have you heard any reviews about those, its a choice between microheli, KTS 215 V3 OR KTS X12'S THEY ALL HAVE AMAZING TORQE AND 333HZ WHICH COMPARED TO MY CHOICE OF SAVOX SH -0265mg at 65hz, stated 333 hz on savox website but thats B/S, When i got them any setting on beastX + above 65hz and all 3 just wagged out like a servo that cant find its centre position, the upgrade to the bigger DS535MG WAS DRAMATIC, 333HZ, I RUN AT 6V , So i have upgraded all electronics, esc, HWing 60 v3 i love, so so configurable with the bluetooth app. I also looked at the ikon2, very nice, and looks like upgrades are free ,my beastx+ i didnt bother unlocking safe etc, just v4.20 out the box, gov ran on hwing esc. So i think the microheli servos, your much more of an expert, kts 215 v3, x12,s or microheli? Thanx for your time, respect RC ADDICT