MIG 200 IGBT GASLESS INVERTER MIG WELDING MACHINE REVIEW & TEST

Рет қаралды 8,894

Күн бұрын

See this excellent gasless inverter mig welding machine. The Mig-200 IGBT is a nice compact machine with a multi functional digital display. In this video I do a short review and test welding. SEE BUYING LINK BELOW...PLUS A SPECIAL OFFER COUPON:-
MIG-200 IGBT GASLESS MIG WELDING MACHINE:-
www.banggood.com/custlink/KD3...
coupon code:BGc9fd12
code price: $139.99
warehouse:CN
exp:2023-09-15

Пікірлер: 32

@SteveJordan 11 ай бұрын

SEE LINK BELOW MIG-200 IGBT GASLESS MIG WELDING MACHINE... PLUS A SPECIAL OFFER COUPON:- www.banggood.com/custlink/KD3FZHd3HB coupon code:BGc9fd12 code price: $139.99 warehouse:CN exp:2023-09-15

@zorinho20 11 ай бұрын

Welding is very useful skill to know and pretty cheap to enter. Good ppe is more important than expensive welder.

@sedulousdabbler5468 11 ай бұрын

I couldn’t agree more. A good quality mask is the best investment apart from time and patience

@SteveJordan 11 ай бұрын

I agree. I have a good automatic welding mask. I normally wear a proper welding apron and gloves as well. Regards Steve

@bigsid2057 10 ай бұрын

You mean that time my jeans caught fire was down to poor ppe😂

@Bob_Adkins 11 ай бұрын

I have one of those with the same functions and controls but with a plastic housing. The leads and clamps are identical. Haven't tried the wire feed yet, but the stick function works great. These little inverter welders are scorned by "real welders", but they work well and reliably, and with practice, they are all most hobbyists need.

@SteveJordan 11 ай бұрын

Hi Bob, Yes, they are excellent, really. I have had a Chinese Mini inverter stick welder for years now, and it has never let me down. I actually couldn't weld at all with the old type welding machines. It was only when I bought an inverter type that I managed to get reasonably good welds.

@nounoufriend1442 2 ай бұрын

@@SteveJordan Had cheap invertor stick welder few years now great bit of kit ,loads better than my old transformer buzz box . Just got cheap invertor MIG gas / gasless really pleased with it did try the fluxed wire but found welds are bit dirty and you struggle to see the weld pool with all the smoke /crap coming of weld . Flux core is acceptable as you don't need to drag bottle about but gas shield welding is so much better IMO (I just use Co2 Pub bottle ) Done alloy and mild steel at work with big welding plant ( qualified welder ) and was surprised how good this little welder is

@Gazz_R 11 ай бұрын

Nice piece of kit! Thanks for the review and demo. Take care and have a great weekend.

@SteveJordan 11 ай бұрын

Thanks, you too! Regards Steve

@cellzapper 9 ай бұрын

Thank you for all your good videos. As a result of this video I purchased the European plug adaptor from Amazon , and I need to point out the following for you and your followers. I have put this review on Amazon..... Beware YOU can reverse connect your device and not be safe. This adapter is fine in every way BUT, YOU can connect your device in reverse, live and neutral swapped over. I discovered this because my soldering iron was beeping all the time , BUT it was switched off. Checking the internals of the iron revealed the power was reversed, allowing this strange behaviour. Plug your European plug in with the lead facing away from the earth pin on the adaptor. I have marked mine with green and red permanent marker. so the the red is covered by the lead and the green shows.

@SteveJordan 9 ай бұрын

Hi. Many thanks for pointing that out. Best Regards Steve

@65cj55 11 ай бұрын

Good purchase Steve, they're super handy.

@MalJ-eb7nv 11 ай бұрын

Good video. Looks like a handy mig. I will look om the web. Thankyou

@douglasstovall2395 10 ай бұрын

Thanks for this review. What is the maximum material thickness recommended for this unit?

@SteveJordan 10 ай бұрын

Hi I'm not sure. I've used it on angle iron ok. I have found its great to spot weld parts together as well. It is a great piece of equipment. I don't know a lot about welding, so maybe someone else can answer. Regards Steve

@tallyman15 11 ай бұрын

Need shielding gas welder.

@spudnickuk 10 ай бұрын

You do get what one pays for. But do please check to make sure the machine is properly Earthed As many of these Chinese budget welders don't

@SteveJordan 10 ай бұрын

This one is earthed, and it's an excellent machine. I have several other Chinese welding machines that I have had for a few years now. I've never had any problems with them whatsoever. They are excellent in use. Regards Steve

@ThanasisThomas 5 ай бұрын

Can this machine use 0.9 wire?

@MayLing-xh5rc Ай бұрын

No, you will burn the welder out

@seansysig 11 ай бұрын

So it’s a Flux Core and Stick welder

@SteveJordan 10 ай бұрын

Yes it is. Regards Steve

@cliveymasters3643 11 ай бұрын

You were dragging as in stick welding.......for TIG you need to push.

@alant5335 11 ай бұрын

He was mig welding, not Tig welding!

@leonclose7823 11 ай бұрын

This is flux-core wire, so produces a slag coating over the weld. Dragging is better, since you don't end up welding through the slag and getting inclusions. The lead angle shown here is probably excessive though.

@SteveJordan 11 ай бұрын

@leonclose7823 I will look into the welding angle? I am still learning, so there's much I don't know about at the moment. Regards Steve

@65cj55 11 ай бұрын

Gassless you drag, just like stick.

@nobbysworkshop 11 ай бұрын

Thanks for sharing Steve. I was given a gasless mig welder some time ago, which I haven't used yet. This has given me the incentive to have a go. Cheers Nobby