How to Separate and Screen Print Simulated Spot Process on Black and White Shirts

How to Separate and Screen Print Simulated Spot Process on Black and White Shirts - Anatol Titan M

Рет қаралды 36,675

3 жыл бұрын

Get Your Copy of ActionSeps™ - actionseps.com
In this tutorial I walk you through how to separate and screen print simulated spot process on black and white shirts on our beloved Anatol Titan M ASE!
T-Shirt Screen Printing Registration Template - mikeydesigns.com/product/scre...
Art Proof Approval Template - mikeydesigns.com/product/art-...
Adobe Software Discounted (Illustrator, Photoshop) - bit.ly/Adobe-Photoshop-CC-Scre...
Ricoma Discount Link: ricoma.com/US/referral/matthe...
Payments as LOW as $130 a Month, 0% Financing with Approved Credit, Plus $100.00 off Single or $250.00 off ANY Multi-Head with Our Link!!!
Use our link for your Amazon purchases to help support our channel: amzn.to/2oZJRO4
My Amazon Wishlist for gear I need to step up this channels creativity...
amzn.to/2m6OSpR
For custom screen printed shirts:
Call Us! 281.883.4889
info@mikeydesigns.com
mikeydesigns.com
Find us on:
Facebook - / mikeydesigns
Instagram - / mikeydesignssilkscreen
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

Пікірлер: 96

@SoulDeepDesignsByCheri 3 жыл бұрын

Matt Thanks again for SHARING your DYNAMIC skills YOU ARE SO AWESOME.

@mikeydesignssilkscreen473 3 жыл бұрын

Thanks! Any time.

@Dtag1971 3 жыл бұрын

It was so so so good to see the update. Looks like you are doing much better. Much love from WNC... YALL ROCK 4 DAYZ!!!

@mikeydesignssilkscreen473 3 жыл бұрын

Thank you!

@tainoink 3 жыл бұрын

Wow! Thank you for sharing your skills. Watching your video and I'm in photoshop going step by step and so far it's looking great. Great video! Priceless.

@mikeydesignssilkscreen473 3 жыл бұрын

Glad it was helpful!

@americanmotorheadmarketing2406 3 жыл бұрын

Great Job Matt! Thanks for all your help...

@mikeydesignssilkscreen473 3 жыл бұрын

Glad it was helpful!

@ravvsandhu8517 5 ай бұрын

great job guys loved it

@mikeydesignssilkscreen473 5 ай бұрын

Thanks!

@shirpradhan2583 3 жыл бұрын

Thanks for the info and love them locks of yours :)

@mikeydesignssilkscreen473 3 жыл бұрын

Hahah, why thank you!

@denisestewart2957 3 жыл бұрын

You made this look so easy yet a lot of colors, awesome job Matt and easy to follow thanks for sharing your creative mind skills, stay safe, wise and Bless

@mikeydesignssilkscreen473 3 жыл бұрын

Thank you Denise! I really appreciate it.

@therealtopg496 Жыл бұрын

You got a like, a subscriber and a buzzer on from an old guy. TNice tutorials is the best soft soft tutorial I've seen so far. You covered a lot of

@alexandrechagas4907 3 жыл бұрын

mister Mickey thanks for the explanation video class congratulations success always great day to all 👏👏👏👏👏🙏

@mikeydesignssilkscreen473 3 жыл бұрын

Thank you! Great day to you as well.

@denisestewart2957 3 жыл бұрын

Those shirt are out cold :) fantastic

@mikeydesignssilkscreen473 3 жыл бұрын

Thanks! :) They loved them.

@t-shirtandstickers4042 3 жыл бұрын

Great job!!

@mikeydesignssilkscreen473 3 жыл бұрын

Thank you!

@jonanderson6786 3 жыл бұрын

Thanks Mike!

@mikeydesignssilkscreen473 3 жыл бұрын

You bet!

@hawwwgjaw 3 жыл бұрын

Great video

@mikeydesignssilkscreen473 3 жыл бұрын

Thank you!

@carlosricardocuervo682 3 жыл бұрын

Nice one there again Antman, lol! now i know how you separate it and put it into the frames

@mikeydesignssilkscreen473 3 жыл бұрын

lol, thanks!

@hudgeheffner 3 жыл бұрын

Awsome video. Thanks for sharing so many helpful hints. Would it be possible to print each Alpha channel directly out of Photohop if I convert them into halftones?

@DB-ii7to 9 ай бұрын

Why does this guy remind me of Paul Rudd? Thanks so much for making this video. Finding how to separate colors for simulated process printing specifically on black isn't the easiest information to find. I am still doing something wrong but this is the closest I've gotten so far. I have trouble reducing the colors down from 10 to 6, or 5.

@Slim7031 3 жыл бұрын

Good stuff guys! Can’t wait til we get a sim process job & not a request for 1 shirt lol 😂💁🏽

@mikeydesignssilkscreen473 3 жыл бұрын

Thanks! LOL, I know the feeling.

@defixgarment Жыл бұрын

mazing, greetings from the Malang-East Java Convection

@burtrussel1535 Ай бұрын

Awesome. I wish I had an auto press. 😞😁😎

@ralf5886 3 жыл бұрын

More videos like this please

@mikeydesignssilkscreen473 3 жыл бұрын

Sure thing!

@RTNP4KHDcinema 3 жыл бұрын

I like u your printing design

@mikeydesignssilkscreen473 3 жыл бұрын

Thank you!

@mikeprice820 3 жыл бұрын

if anyone is having trouble with the base, If you have a transparent background, make a new layer fill it with black and put it in the back. Then select the rgb layer and invert. then hide the black layer. makes a better base than just selecting alone.

@mikeydesignssilkscreen473 3 жыл бұрын

Thanks for the tip.

@marocasa1995 3 жыл бұрын

appreciate the video, how do you deal with film stretching for some reason always have issue with film stretching a little so it never line up perfectly. thanks

@mikeydesignssilkscreen473 3 жыл бұрын

line all of your film up on top of one another before exposing them. If a color is out of wack, reprint it. thanks!

@maka1978 3 жыл бұрын

Hi Matt , another great video ! Can you tell me , why did You set for colors 15% solidity instead of 5% ?

@mikeydesignssilkscreen473 3 жыл бұрын

The solidity is really just a screen rep. In this case, because there were a lot of solid areas of color, I turned it up a little just so it'll appear brighter on screen. The solidity really has no effect on how the print results turn out.

@Tyler-216 3 жыл бұрын

In this video, you select all R, G and B as a base. I think in previous videos, you only select one of the three for both base and highlight. I haven't printed a sim on dark garments, but watch these to be prepared when one comes my way. Do you suggest selecting all for the underbase or just the one of the R, G, or B profiles that reflects the best option or does it just differ per job?

@mikeydesignssilkscreen473 3 жыл бұрын

I don't necessarily look at it like a set process. Different days, I may feel like taking a different approach. As long the the results come out well on screen, and press, that's all that really matters.

@bigdogpound1253 Жыл бұрын

Can a screen printer print 20 plus colors on a tee

@richskl6631 4 ай бұрын

Pretty good vid. Alot of these colour separation vids are either poorly explained, incomplete or move too quickly. Cheers

@cre8tivedm 3 жыл бұрын

Pretty cool. What’s the set of Actions called that you’re running in photoshop? Thanks!

@mikeydesignssilkscreen473 3 жыл бұрын

It's a set of actions I developed and will release once I get our shop situated.

@guwopjesuss2070 3 жыл бұрын

Hi Mike i wanted to ask if you could give me some advice I been trying burn my pictures onto the screen but for some reason the emulsion won't come off I use a 500watt lamp and dual cure emulsion and let the transparency paper sit for 13mins any advice?

@mikeydesignssilkscreen473 3 жыл бұрын

It may be because the film isn't dense enough, or you're not getting good positive contact with the film to the screen. Be sure the printed side of the film is the one touching the screen. I hope this helps.

@maurihernandez7671 3 жыл бұрын

Hi a bit of a newbie question here. But, would you always use the same ink colors when doing a simulated spot process? Like would you always use that exact same shade of blue and cyan?

@mikeydesignssilkscreen473 3 жыл бұрын

As close as you can get to it, and the result will work fine.

@campfyretales6708 3 жыл бұрын

Have you released your software yet

@GrafXnj 3 жыл бұрын

Great vid, 2 quick questions, when doing the white shirt wet on wet, are you flashing the black that you are laying down first? Also what angle are you running your squeegees at on your anatol. I been trying to dial in the best angle. Thanks, again great vid

@mikeydesignssilkscreen473 3 жыл бұрын

Thanks! We run it at 20 with just enough pressure to blend the squeegee so it's using the edge of the squeegee. We weren't flashing the black. Just all wet on wet so the colors mix.

@GrafXnj 3 жыл бұрын

@@mikeydesignssilkscreen473 cool thanks, I was thinking printing over wet black would make a muddy look, but I’m guessing the high mesh screen allows just the right amount, definitely gonna try as every cycle or flash adds time to the run and time is $. Thanks again

@momamars 3 жыл бұрын

I have watched this several times - I have a few questions - is this the best place to ask about that - im using the latest version of PS

@mikeydesignssilkscreen473 3 жыл бұрын

This is a good place to ask.

@dwlouden 3 жыл бұрын

Great vid! It would have been nice to get a better/longer close up look at the final print. Also, you spent a lot less time adjusting the separations in Photoshop on this one. Is there a reason for that?

@mikeydesignssilkscreen473 3 жыл бұрын

Thanks! You're right about that. I thought I had got more footage of the final print, but that job had already went out the door. The reason is, it's a simpler graphic and didn't need a whole lot of fussing with.

@dwlouden 3 жыл бұрын

@@mikeydesignssilkscreen473 oh, ok. That makes sense. One other thing if you don’t mind. You also didn’t trap the top colours in this one. Is that because you didn’t want it trapped on the white tee or is there another reason for skipping that this time?

@HerrNox 3 жыл бұрын

Hey there! In a previous video (a fairly older one), you expanded the selection by 1 pixel for all colors, but you didn't here. What's the use of expanding the selection?

@mikeydesignssilkscreen473 3 жыл бұрын

It just depends on the graphic. With this one but registering things was just fine.

@HerrNox 3 жыл бұрын

@@mikeydesignssilkscreen473 Alright! Thanks a lot for the reply.

@noahjones8241 Жыл бұрын

I have been trying to reach you on my program and you're not getting back to me my program do not work N&J action seps do not work

@bigmamabren3360 3 жыл бұрын

Ok, I'm working on an image and when I get to blue (it's a photo of a US Flag), I get that warning that less than 50% pixel... blah, blah, blah. I ignored the warning like you said. However... it won't invert the image. It turned into a big blue filter over everything. I've deleted it and gone back and repeated the process. Changed to a different picture... same results. What am I doing wrong???

@mikeydesignssilkscreen473 2 жыл бұрын

And the image is in RGB with plenty of blue in the flag?

@ligmaknuts6750 3 жыл бұрын

Would it be easier in separation studio?

@mikeydesignssilkscreen473 3 жыл бұрын

Yes, speed wise. Separation Studio works well, but just keep an eye on that highlight white because it makes it really heavy when it's not necessary.

@cs3807 2 жыл бұрын

I have watched a few of your Simulated Spot Separation videos and am having a problem saving my finished file. When I open the Save As dialog the Alpha Channels and Layers options are not available to check. I am using CS6 and my file is currently RGB 16 bit. I have tried to save as different file types (TIFF, JPG, PNG) and they Channels/Layers options are still not available. I have also tried to change to 32 bits but then only Alpha Channels is a save option. I dont use Photoshop much, have been doing my artwork in Illustrator, and am running PrintFab for RIP software. I am at a complete loss as to why I am not able to save my file as you have shown in your videos. Do you have any insight on this? Thanks for your tutorials.

@mikeydesignssilkscreen473 2 жыл бұрын

You may have to delete the RGB channels and the T-Shirt color channel and save it as a DCS 2.0 eps.

@cs3807 2 жыл бұрын

@@mikeydesignssilkscreen473 Thanks, will try that.

@cartada8888 2 жыл бұрын

is that in halftone detail or just a solid spot

@mikeydesignssilkscreen473 2 жыл бұрын

Both.

@leroybernard2785 3 жыл бұрын

You can loock fot back with cmyk

@mikeydesignssilkscreen473 3 жыл бұрын

CMYK is fine. I'm just not a fan of the gain that happens during the run and spot process keeps things consistent.

@denisestewart2957 3 жыл бұрын

Curious do you draw and designs some of your art work?

@mikeydesignssilkscreen473 3 жыл бұрын

We, and I do. :)

@denisestewart2957 3 жыл бұрын

@@mikeydesignssilkscreen473 awesome, I can draw really good stick people lol

@hawwwgjaw 3 жыл бұрын

So why didn’t you turn to halftones?

@mikeydesignssilkscreen473 3 жыл бұрын

We have a RIP software, but I'll be sure to walk you through that in another video and show the results.

@mikeprice820 3 жыл бұрын

no longer expand by 1 ?

@mikeydesignssilkscreen473 3 жыл бұрын

We still do. We just sep'd this one a little different since it's going on white as well.

@safkathashem7972 Жыл бұрын

How much that machine cost ? I mean the Screen printer machine. Thank you in advance and I hope you'll reply soon.

@mikeydesignssilkscreen473 Жыл бұрын

Not sure at todays market price. I would give Anatol a call.

@taskendprinterstaskendprin9724 3 жыл бұрын

Can I chat personally

@RTNP4KHDcinema 3 жыл бұрын

Hi bor I am t shirt printing designer

@netwrkops 3 жыл бұрын

I am so lost.

@mikeydesignssilkscreen473 3 жыл бұрын

On which part?

@netwrkops 3 жыл бұрын

@@mikeydesignssilkscreen473 the colors and how you separate knowing how to merge the colors

@harryzam60 3 жыл бұрын

Great job!!

@mikeydesignssilkscreen473 3 жыл бұрын

Thank you!

@Ramellosugahill 3 жыл бұрын

Great video

@mikeydesignssilkscreen473 3 жыл бұрын

Thank you!