How to Repaint Your Wheels (ANY COLOUR)

Рет қаралды 400,920

7 жыл бұрын

PREVIOUS VIDEO ▶︎ • GOOD NEWS!!!
In this video, I show you how I go ahead and repaint the rusty steel wheels on a Ford F250. By following this procedure, you will have the knowledge, a full step by step tutorial, and the links you will need to tackle this project yourself.
I have everything you will need linked below, in the order of appearance. If you’re looking for something that I missed, just let me know in the description, or send me your question at milanmastracci@gmail.com.
This tutorial is mainly focusing on steel wheels are the rusting, however if you are working with alloy wheels, it will be a bit easier as there will not be any rust and the aluminum is a softer substrate than steel, meaning the prep should be easier. I will include a video in the future regarding painting alloy wheels.
If you have any questions regarding the video, you know what to do. Thanks for watching!! :)
______________________________________________________________
Please give it a like 👍 and follow 👣
MILMAST MERCHANDISE ▶︎ www.cteecustoms.com/category/m...
milanmastracci KZfaq Channel ▶︎ / milanmastracci
milanmastracci Facebook Page ▶︎ / milanmastracci
milmast Instagram ▶︎ / milmast
______________________________________________________________
Videos in the Outro 🎥
GOOD NEWS!!! ▶︎ • GOOD NEWS!!!
How to Install a RACE Cold Air Intake ▶︎ • How to Install a RACE ...
______________________________________________________________
Products Used 🛠
PREP
3M Face Mask ▶︎ amzn.to/2fiNLul
Porter Cable 6 Amp Angle Grinder ▶︎ amzn.to/2fwqIRM
10-Pack Auto Body Sanding Flap Disc (80-Grit) ▶︎ amzn.to/2eeI8wp
10-Pack Auto Body Sanding Flap Disc (120-Grit) ▶︎ amzn.to/2eoQ0Pv
Griots Garage Sander 3” Sander ▶︎ amzn.to/2foBKrj
3M 3” Foam Interface Pad ▶︎ amzn.to/2ebE98X
3M 3” 120 Grit Sandpaper ▶︎ amzn.to/2fGrlsl
3M 3” 320 Grit Sandpaper ▶︎ amzn.to/2fOLj33
3M 120 Grit Sand Paper Sheet ▶︎ amzn.to/2ebCLTA
3M 320 Grit Sand Paper Sheet ▶︎ amzn.to/2ebG4dD
Wire Brush (By Hand) ▶︎ amzn.to/2fGu2tP
Wire Brush (Impact Driver) ▶︎ amzn.to/2fncX49
Wax and Grease Remover ▶︎ amzn.to/2ezUlz3
Shop Towel (2-Pack) ▶︎ amzn.to/2ezWQBL
3M Paint Respirator ▶︎ amzn.to/2ebIdWo
Olfa Serrated Scissors ▶︎ amzn.to/2ezVp65
PAINT (Primer → Base Coat → Clear Coat)
Rustoleum Automotive Primer ▶︎ amzn.to/2foBJUa
Rustoleum Gloss Protective Enamel (Base Coat) ▶︎ amzn.to/2epsfmU
Rustoleum Gloss Clear Enamel (Clear Coat) ▶︎ amzn.to/2fngf7s

Пікірлер: 505

@volvovalor8051 4 жыл бұрын

Doing the first wheel is fun. Doing all 4's get old pretty fast :p

@kevinellsworth9318 3 жыл бұрын

It’s called doing the job , Rufus!

@volvovalor8051 3 жыл бұрын

@@kevinellsworth9318 Ok?

@historys_cameramann5663 2 жыл бұрын

Yeah lol try doing a dually

@juliopozo2824 4 жыл бұрын

Nice to see a young kid doing work like this.

@alcolavista-22 7 жыл бұрын

this is the basic concept of DIY to make it things look nice.....its simply an awesome job..but I dont understand with all the people who dont appreciate the effort of showing the skills and the technicality of this gentleman....this guy one day will be a professional mentor...keep doing it buddy...

@daniel3188 6 жыл бұрын

"Rust is like cancer" leaves whole other side of rim and back of bead rusty and untouched, along with wheel weights.

@rlo2367 7 жыл бұрын

ChrisFix also did a video on how to repaint rims and he did a splendid job.

@brayanpena9275 7 жыл бұрын

i liked his more

@user-iz2nv9kn1h 7 жыл бұрын

Bubble Butt That's what I thought this was at first. I thought he did a new video.

@gedasalekveravicius5466 7 жыл бұрын

Nope you're not

@campervanelvisitoofonyou8720 7 жыл бұрын

Bubble Butt Chris Fix has better videos

@carsonkomac7421 5 жыл бұрын

Don't use an impact with a wire wheel use a regular drill

@kai_291 7 жыл бұрын

Milan you and Chrisfix have to make a collab because you two are awesome

@darkunicorn1208 7 жыл бұрын

they really should. Their videos help so many. I even used their tips for my car lol.

@HeldigDansker 7 жыл бұрын

I agree they are both awesome, but Milan lives in Canada, and ChrisFix is in the US.

@kai_291 7 жыл бұрын

Lucky Dane Yeah it would be pretty tricky.

@milanmastracci 7 жыл бұрын

I think that'd be fun :)

@Googaliemoogalie 7 жыл бұрын

Kai -291 exactly

@JerniganRacing863 7 жыл бұрын

awesome job, im always impressed with your videos. you do the job right the first time and explain it really well for anyone to do it themselves

@Thunderbyrd. 6 жыл бұрын

I can't believe there are so many paint masters and experts in one comment section. It's incredible. I'm sure they all have there own channel where they educate the rest of us on the proper techniques of painting car wheels. I like the video. Looks like a good DIY project for a work truck most anyone can do. Well, except for a few haters in the comments, lol.

@kdigiacomo 5 жыл бұрын

Makes me laugh because if they "know it all" then why are they watching these? Just to pick on people I guess.

@ResottoLP 7 жыл бұрын

'Rust is like cancer' good comparison.

@hichemtahi2863 6 жыл бұрын

Error 404 yup

@Thatguy-cf9qj 6 жыл бұрын

Troy oh stfu.

@lennym480 6 жыл бұрын

Error 404 Cancer is what it's called when the rust has eaten through the metal. This is a hack job! Take off the weights from the rims before you paint it lol

@timmyturner4410 2 жыл бұрын

@@lennym480 Not to mention he didn’t do the inner part of the wheel. That rust is just going to creep up and under the paint again

@johnslashinski957 4 жыл бұрын

Very informative. You do a very good job explaining the process.

@fredjones5327 7 жыл бұрын

Super cool you taught me something again!! Lol love it!!!

@Abdiel1178 7 жыл бұрын

I don't even own car yet and I still watch these vids , he always does top notch work.

@logelm3833 7 жыл бұрын

Mandingo Trotman How would you know this "top notch work" if you know nothing about this work

@Abdiel1178 7 жыл бұрын

Log Elm I think he is very thorough. and I think that says a lot.

@logelm3833 7 жыл бұрын

Mandingo Trotman Allot of the information is incorrect.. before you do any work like this I would reccomend watching multiple videos.

@Abdiel1178 7 жыл бұрын

Log Elm you sound like you know about this kind of thing . I will take your advice.

@LUCAS.SOARES96 7 жыл бұрын

Awesome video, as always ! good job Milan !

@imdabl 7 жыл бұрын

Literally perfect timing. Buying and refinishing wheels monday

@hichemtahi2863 6 жыл бұрын

Bro, you're a legend ! Keep it up !

@Shadygbg 7 жыл бұрын

Nice video. why didnt you remove the weight from the wheels? when you balance the wheels next time you will notice the old color.

@DavidB445 7 жыл бұрын

Right.. They are all going to need balanced again anyway.. using the flap disc removes some metal as well as the rust and paint and now it has 9 coats of paint, 3 of each can, so the weight will be all over the place.

@maxmoq8423 7 жыл бұрын

3 cans of each on 4 different wheels won't affect the balancing and also removing the rust and paint would change the balancing but would not be noticable as it would be such a tiny difference.

@harris8390 7 жыл бұрын

Chadi Audi Yes.... the propery way would be to pry off the weights with a flathead. At that point youre gonna have to pay around $80 to have all 4 balanced again. Its really at the discrection of you.

@maxmoq8423 7 жыл бұрын

Where do you get charged 80$ to get balanced 4 wheels?? Here to get 4 tires changed on mags and balanced cost 50$ in total, and to only get 4 wheels balanced costs 15$ for all four.

@roberto9787 7 жыл бұрын

smart move

@mike.135i 7 жыл бұрын

perfect video. best youtuber for people who actually want to learn +1.

@vincenteo20 7 жыл бұрын

awesome video, very very detailed. thanks!

@skorik101 7 жыл бұрын

Im binge watching your videos!!! Nice tips with the paper markers, I would of probable take the whole wheel lol!!!

@manfordwilliamson8145 7 жыл бұрын

Well done, great narration!

@ptlpszt1 3 жыл бұрын

Excellent prep work

@str8facts960 3 жыл бұрын

Great video thank you kindly for the post, very informative.

@KManHU 7 жыл бұрын

Great detail! Thanks

@cashonly6117 8 ай бұрын

Was looking for a video like this and had already seen about 5 that were so vague and uninformative. The best and most thorough wheel painting ever. Thank you. This could be a video for dummies, like the books. 😂

@hass1337 7 жыл бұрын

congrats ON 80K YEAAA BOIII

@kwijaeboner 7 жыл бұрын

Awesome job dude, I hope mine come out so well

@luisitocolon2011 5 жыл бұрын

Killed it bro... doin same thing to my dually rims

@AndreaPick 9 ай бұрын

Great stuff, thank you.

@JonasGodwin 7 жыл бұрын

Fantastic video Milan!

@milanmastracci 7 жыл бұрын

Thanks buddy :)

@TCLynch-cc1zz 7 жыл бұрын

keep it up man!

@FCFordLord 7 жыл бұрын

One important thing on these old style, pressed steel wheels that rust - check the welds. I had a set of 80's wagon wheels on my diesel that rusted at the welds on the back and started vibrating. Traded with someone that wanted the tires and scrapped the wheels, win-win for us both.

@WASABYpr 6 жыл бұрын

wow it was fun to watch thanx 👍🤣

@paulsikora5623 11 ай бұрын

great video.

@Jt96. 7 жыл бұрын

You did such a good job I had to subscribe

@duanepowelljr9497 4 жыл бұрын

Love the video

@geeegeee 5 жыл бұрын

Nice detailed video.

@anthonyforest3490 7 жыл бұрын

Very nice bud!

@alongtimecoming5298 4 жыл бұрын

Appreciate it you helped me a lot

@Faraonqa 7 жыл бұрын

starts sanding doesn't remove balance weights

@jordanatchinson1769 6 жыл бұрын

EmptySergeant well yeah.. then you would have to go and pay to have your wheels balanced again dipshit

@fcaughli 6 жыл бұрын

Not if you do what knowledgeable people do, mark the weight locations. I think he may wanted to have the weights painted black also.

@Mahaney82 6 жыл бұрын

So what happens when you get new tires or need to balance the wheel? All that time spent sanding and painting is wasted. So in the long run, is it worth it, Dipshit?

@shutitupnlisten 5 жыл бұрын

Yea you always remove the balance weights because if you want your tires to last the full length you rotate and balance them every 7 to 8 thousand miles and chances are your gonna need to move the weights when you do so yes always remove the weights but other then that is a nice paint job

@kdigiacomo 5 жыл бұрын

@@jordanatchinson1769 - Nope, you just mark the tire where they go and put them back on "dipshit". Who feels stupid now?

@zevach17 7 жыл бұрын

Nice video!

@TopGamingStudio 7 жыл бұрын

Great vid!

@paulkimble6267 5 жыл бұрын

Good job , good video

@Jredding352 7 жыл бұрын

Hey great video I subscribed!!

@Mvasqu25 5 жыл бұрын

Nice!

@sebbekartellen6493 7 жыл бұрын

I just got my car license!! I got it on the same day I turned 18! (I live in Sweden and you got to be 18 to get a license here) Anyway, I just bought my first car about 2 weeks ago. And I have already styled it and it looks really good. I have painted the rims black, and the brake calipers red. I have also put on a black racing stripe. And I have bought new "side mirror indicators". The car already had tinted windows and eyelids on when I bought it. I have a Volvo v50. Just wanted you to know xD

@MrJose2602 7 жыл бұрын

Nice !!!!

@off-roadrcaddict4572 7 жыл бұрын

Nice job.

@shaneisaacs1350 7 жыл бұрын

👍🏻 great video!

@milanmastracci 7 жыл бұрын

Thanks Shane!!

@jessev4969 5 жыл бұрын

Im trying to remove paint and a little bit of rust on my trailer to paint it . will the flap disk work better and faster then the wire brosh ?

@eian2650 7 жыл бұрын

Hey man, I love your videos. I just bought a 84 Fiero it's bad I know but just thinking about the mods I can do I love looking forward to the next mod. Your videos really give some good knowledge.

@tattedvet8355 2 жыл бұрын

@eian2650 2 жыл бұрын

@@tattedvet8355 yeah that was 5 years ago so I don’t know ether😂

@rockinjohnny1199 6 жыл бұрын

Lots of criticism, but I bet none of them made a video trying to help out. Very nice job. Will be doing mine soon.

@ToniaLeethesalmonmousse 7 жыл бұрын

Go get that money kid your great at everything you do!

@franciscoavina1568 7 жыл бұрын

should've used self etching primer on the bare steel. and sanding between the primer and base would've given a better finish

@mickymann7880 5 жыл бұрын

Good job

@milanmastracci 5 жыл бұрын

Thanks Micky! :)

@richardcoltman6313 3 жыл бұрын

well done my mate!

@milanmastracci 3 жыл бұрын

Thanks Richard! 👊

@damon123jones 2 жыл бұрын

Good through job

@MuffinShadowStudios 7 жыл бұрын

Hello love you're vids, very informative and thoughtful. Question, I have a 2001 VW Jetta with OEM grey alloy wheels. I would like to paint them white, would this same method work? or another method? Btw I've been watching you're VW GOLF series. 👌

@olliecarr3157 5 жыл бұрын

Thinking about doing this to my wheels did it last well?

@pro_murderer3239 7 жыл бұрын

You are getting closer and closer to 100,000 subscribers.

@milanmastracci 7 жыл бұрын

Almost there :)

@12vLife 6 жыл бұрын

@9:35 nice tip! glad I saw that.

@haroldmeans5774 3 жыл бұрын

What about the wheel weights. If you have the tire rebalanced chases are the weights will be in a different location and you wind up with a place with no paint. What do you do about that spot ?

@jeffbrown6243 6 жыл бұрын

Is it a good idea to have the tires removed and paint the inside of the rims?

@gabecasselman3979 7 жыл бұрын

hey man, what program do you use to edit your videos ?

@Jarod1941 2 жыл бұрын

Contemplating whether to do this but it's November with damp cool air. Thoughts on doing this when it's 5-10°C with mid-high humidity?

@WikkedR1 4 жыл бұрын

Good video. My only critique is that an angle grinder is a bit too aggressive IMO. It can cause “waves” in the metal which, depending on the color you choose, might show in the finished product. When doing a project like this you HAVE to take your time. Shortcuts might save some time but the results are usually better when more patience is exhibited. And 🖕🏻all the haters. Keep doing your thing, young man!

@Colintheworldsgreatestplumber 9 ай бұрын

He then went over it with many stages of less aggressive grit. You need something aggressive to get all the rust and grime off.

@jcloud2928 6 жыл бұрын

Does anyone know if chrome paint color works for rims instead of plastic silver hub caps. I only see vids for black rims.

@killerklown6905 5 жыл бұрын

Kinda funny I subscribed and u got a notification 😂

@hunterhaynes 7 жыл бұрын

Hey Milan, what are your thoughts on plasti dip clear coat in a can?

@FernandoCastillo-qq6pe 7 жыл бұрын

good video but you should paint those center caps black also!!!!

@MarioHernandez-jj8fq 7 жыл бұрын

Fernando Castillo I was looking for this comment

@Ano_Ba_Girl 7 жыл бұрын

Lol watched all the way to the end... 3 uggua dugua hahahaha

@md8744 4 жыл бұрын

Hi there, may I ask u this, how many can 11oz for 4 wheels of 19 inches, thanks

@boydmerriman 3 жыл бұрын

Those cards make it look like you got white walls on your tire! That would be a cool look on your truck! (I miss white walls) Personally, I think three coats of primer is a waste of paint and time, since primer is primarily used to help bond to the surface and after two coats (second to help cover perfectly) is no longer necessary as the surface is fully covered and you are just priming primer.

@superjustinnn 7 жыл бұрын

Love your videos bro. Do you think you can make a video on what to inspect and how to do it when buying a used car?

@OrdraksTv 6 жыл бұрын

Hey man thanks for the guide i need this but i only have sandpaper to use with my hand and the wire brush too so i can paint my wheels with this and yes i have the primer the base color and crystal help me out here thanks and keep going with the guides

@MrKaje72 7 жыл бұрын

For all those concerned about the wheel weights: he likely doesn't care about the wheel, it's probably a scratch(that's what we call it in my shop), you do shit to it because you can or you need the practice. He did a fine job, sanding was ok, but everything else considered he's pretty masterful for so young.

@rayjang4015 7 жыл бұрын

Is it okay to spray rim clear coat for body painting?

@harris8390 7 жыл бұрын

Does the cold weather affect the finish/drying?

@sh6lby553 7 жыл бұрын

You should make another video - How to turn painted wheels into polished/chrome . I see that after you grind of the paint of the wheel , you could use extra fine sandpaper to a near chrome state & apply metal polish to top it off.

@pmotley 4 жыл бұрын

Liked video, thanks. Didn't know the warm water trick. If painting with tired off, do I paint the inner part, or just clean and treat with Marvle's, or something?

@NickBarrows 7 жыл бұрын

i like the primer grey color! seal it! done :)

@Skeptical357 4 жыл бұрын

Does it really need 3 coats of primer?

@anthonyschiavi1331 6 жыл бұрын

I wouldn't grind on rims because when you do that it usually causes the wheel to become greatly out of balance.

@hardkore360 3 жыл бұрын

that doesn't make sense to me, imagine all the mud and rust behind the wheel that throws the wheel off balance just as it is. If you then remove the rust, clean the inside of the wheel, and rebalance the tire, I dont see any issues with sanding.

@MrArons21 7 жыл бұрын

how does this hold up when you have tires changed?

@ffjokere3 5 жыл бұрын

I just bought a new truck that has steel painted rims. Since the rims are new do I still have to sand the paint off or can I just paint over them? this is a work truck with the gray steel rims.

@dahnejaygomez 7 жыл бұрын

dont u need to sand to a finer grit after ypu do primer?

@TheWolverine-rm2kr 7 жыл бұрын

Looks nice now you have to do it on the other three wheels

@GMWsho 7 жыл бұрын

sweet :)

@Xbbgun12X 7 жыл бұрын

Alright question, I know you made a video a while back about cleaning and waxing wheels (or at least I'm pretty sure you did) is there any special process to wax wheels that are spray painted or is it the same as regular wheels

@ryanwagner1113 7 жыл бұрын

how many days did it take you to do the entire project?

@designertjp-utube 5 жыл бұрын

Hi! Great Video! Don't feel like reading thru all the negative comments below, and I'm sure this question already got answered. How long did you wait for the Black Paint to dry before you started hitting it with the Clearcoat?