The 'POCKET' routine is not the only option when machining open ended pockets. Learn how to use the 'CONTOUR' feature and how to change step over, depth of cut and lead in and lead out moves.
Пікірлер: 28
@Mancavedweller19 ай бұрын
I paid $90 for a Mill tutorial ebook from Emastercam and when it came to setting up the contouring on a simple external step, the instructions simply did not work. Not only that but the tutorial ended up setting up for conventional milling instead of climb milling. What a waste of money. Your video has gave me a much better understanding of this type of setup, so thank you very much. I love the way you explain things slowly, methodically and clearly. Great stuff.
@marcoarteaga10108 жыл бұрын
Thanks for the videos please keep up the mastercam series , more helpful than my mastercam teacher !
@TomStikkelman8 жыл бұрын
I will do that. Thanks Marco
@WATERJET19718 жыл бұрын
Very Good Video. I was fighting with the lead in lead out . Now it makes sense Thank you so much
@aces61237 жыл бұрын
Well done. Just starting with Mastercam, Your videos are helping a lot
@funtimebill8 жыл бұрын
thanks for doing this video. i never thought of useing contor. I just asumed it was only good for a profile cut. Makes total sence that it isnt thanks again!
@TomStikkelman8 жыл бұрын
+Greg Thornhill Thanks Greg.
@georgeroper92108 жыл бұрын
yet another great video.i can understand lead in/lead out for the most part.would love to see a video on that,but my question is about using wear.my books don't explain the differences on compensation types and when to use them.thanks again,your videos are the best............
@TomStikkelman8 жыл бұрын
+george roper Thanks George. I will cover that subject in more detail soon.
@samdoan18743 жыл бұрын
You are the man.
@efraincaballero7482 Жыл бұрын
This is an interesting approach, but there's a standard option for "Pocket". On "Cut Parameters", go to Pocket Type and select "Open Pocket"
@maninderpreetsingh17946 жыл бұрын
thanks was really helpful
@performancerdllc25854 жыл бұрын
great video, I always like straight line cut. Shortest distance between to points? less time and machine wear.
@chauhanhardik32956 жыл бұрын
Thanks...Best tricks
@trungquan79964 жыл бұрын
Verry good
@shashikumaracc3334 жыл бұрын
Tq Sir. Super
@shashikumaracc3334 жыл бұрын
Super pls teaching 4th axis master cam
@natecollins52757 жыл бұрын
What does checking the wait box do when selecting the partial chain ?
@farhad64it5 жыл бұрын
What is the difference between finishing pass on dept of the cut and the multipass?
@TomStikkelman5 жыл бұрын
Multi pass controls the step over. Depth finish pass only controls depth of cut.
@negroyote6 жыл бұрын
Its MastercamX7 ?
@natecollins52757 жыл бұрын
What doses roll cutter do?
@sebastiantaylor26002 жыл бұрын
Inserts arc moves around corners in the toolpath. None: guarantee all sharp corners. Sharp: only roll the tool around sharp corners (135 degrees or less). All: roll the tool around all corners and create smooth tool movement. The radius of the arc moves equals the radius of the tool. This option is available only when compensation in computer is turned on.
@vikaschabra14048 жыл бұрын
vikas
@supriyasinha99846 жыл бұрын
Mastercam hu
@danieltoosi54154 жыл бұрын
it is contouring, not open pocketing !!!!!!!!!
@gaz88297 жыл бұрын
NICE TEACHER BUT YOU GET TO LONG TO VARIFY A GOOD PART, THOW IT IS A PART OF LEARNING FROM MISTAKES.........................NICE JOB, MY NAME IS GARY ELLIS MACHINIST FOR ALMOST 40 YEARS AND REALLY ENJOY PROGRAMING......................PEACE OUT BRO