Millyard RC374 Honda six replica - Episode 6

  Рет қаралды 529,999

Allen Millyard

Allen Millyard

Күн бұрын

In this video I am getting the RC374 ready for a track demo (short carpark track) at the Sammy miller motorcycle museum in the New Forrest UK. I remove the fairing to clean the clutch plates and show how I made the aluminium and Titanium fairing screws and a little look around behind the fairing. There is a short running clip at the end in first gear but hopefully its gives an idea of its sound Thanks to Tracey, and Matt (www.altomedia.co.uk) for the riding clips.

Пікірлер: 1 000
@mryorkshire3623
@mryorkshire3623 2 жыл бұрын
It would be funny if Mrs Millyard had a baking channel on KZfaq and then during a video went outside to comment on Allen doing bike maintenance in the garden.
@ikral11
@ikral11 2 жыл бұрын
That'd be great maybe one off special episode! Food for thoughts there, mr Allen.
@johniksushibar165
@johniksushibar165 2 жыл бұрын
picture this, Mrs M is baking a cake, sees the mixing bowl has done a runner, looks in the front room to find Allen washing bike parts in it
@waterboy8999
@waterboy8999 2 жыл бұрын
I thought that's what it was.
@mk1cortinatony395
@mk1cortinatony395 2 жыл бұрын
Brilliant ! :)
@northlandrider5396
@northlandrider5396 2 жыл бұрын
@@johniksushibar165 I reckon Allen is far too clever to get caught that easily. Probably waits until she visits her sister in Land's End.
@stephenpotts8170
@stephenpotts8170 2 жыл бұрын
Brilliant, I don't know any other KZfaq channel where you have a mixture of motorbikes, baking, and wildlife, interesting and entertaining, thank you...
@SubTroppo
@SubTroppo 2 жыл бұрын
And a mechanical toy to boot; how did you forget Charlie Weaver?
@northlandrider5396
@northlandrider5396 2 жыл бұрын
@@SubTroppo And the lawnmower episode.
@SubTroppo
@SubTroppo 2 жыл бұрын
@@northlandrider5396 My first job was repairing mowers, so I try to forget them.
@franklinwilkerson2061
@franklinwilkerson2061 2 жыл бұрын
And machining!
@nelidaherrera7141
@nelidaherrera7141 2 жыл бұрын
t ,y,@@SubTroppo,e o v ,,
@jeffzekas
@jeffzekas 2 жыл бұрын
“Kinda like putting grease in a grease gun” - truly the mind of a mechanical person!
@johnnypav
@johnnypav 2 жыл бұрын
You never fail to stagger me with your attention to detail Allen
@b3knn
@b3knn 2 жыл бұрын
Agreed - but then forgot to put a helmet on!
@toodle171
@toodle171 2 жыл бұрын
@@b3knn forgot? He's cruzing about an enclosed paddock.
@timothysquires6895
@timothysquires6895 2 жыл бұрын
Devin
@davidelliott5843
@davidelliott5843 2 жыл бұрын
Allen's (genuinely) so sure of his months of work building the bike that he's happy to properly rev it. Sign of a true engineer who's confident in what he does.
@garyhughes2446
@garyhughes2446 Жыл бұрын
@@davidelliott5843 I imagine he's very confident of his work being very good but I still think he loves the sound that would be the impetus for revving the engine. For being under 400 CC's it does sound like a beast.
@molser13
@molser13 2 жыл бұрын
As a frenchman but a motorcycle enthusiast, I already knew your name and some of your bikes of course, who doesn't ? But I only discovered your videos today and it's a revelation... I never thought it was possible to achieve this level of perfection with only basic tools. In fact it's impossible without your talent. I hope we'll see a lot of your now famous "hacksaw precision engineering" in the future. Thank you for this and the cupcakes !
@huwjones5879
@huwjones5879 2 жыл бұрын
'We need some screws" Everyone "I'll pop down to Halfords". Alan " I'll get the lathe out..." Genius.
@dailyallowance3826
@dailyallowance3826 10 ай бұрын
I never liked that screw anyway ,next time I'll make an extra one to put a side with others called spares 😀 , and then one day I will count up all the parts for sale as a flat pack and other lucky people can nock up their own bike , excellent thank you Allen much love me old son
@danclegg2443
@danclegg2443 2 жыл бұрын
Need a screw: Me: Goes to Screwfix Allen: I put a 25mm bar in the Chuck. What a guy.
@ouch74
@ouch74 2 жыл бұрын
Ironically that was a pretty easy task to make that screw. All you need is a lathe, vise, hacksaw and a buffing wheel and a few months of machine shop classes. BTW aluminum being a soft metal is a joy to work with the titanium maybe more a challenge.
@ouch74
@ouch74 2 жыл бұрын
Also I forgot to add you need the die to cut the 6mm threads. LOL.
@mikegmdw1
@mikegmdw1 2 жыл бұрын
Made me laugh Dan
@bear-tv
@bear-tv 2 жыл бұрын
Wow the sound that thing makes is just fabulous. Thanks Allen 😊
@DJ-jp6xc
@DJ-jp6xc 2 жыл бұрын
We learn about bikes, engineering, manufacturing, cooking,… thanks for sharing!
@kaardisegaja
@kaardisegaja 2 жыл бұрын
... and wildlife.
@MrEtnorb
@MrEtnorb 2 жыл бұрын
It’s apt that Tracey shows all the skill and attention to detail with her baking as Allen does in his workshop. Cake baking is a precise business, just like making an RC374.
@davidperry7271
@davidperry7271 2 жыл бұрын
Can’t beat a sunny day tinkering with a motorbike while the mrs. does some baking 👍🏼
@gymnutrition7794
@gymnutrition7794 2 жыл бұрын
I always wince every time I see your thumb nail, the one on your hand that is, the video thumbnail makes me go yayyyyy 😊
@AllenMillyard
@AllenMillyard 2 жыл бұрын
It’s getting better now, it’s 12 months since I hit it with my 2kg hammer making the H1 crank seal bid 🙈
@dezgunner5940
@dezgunner5940 2 жыл бұрын
You never fail to amaze me with your fabulous skills and love for motorcycle's , brother it's very special that people like you excist , big up to you
@syncrosimon
@syncrosimon 2 жыл бұрын
Another of my ‘most anticipated’ KZfaqrs👍😎
@jeffmullinix7916
@jeffmullinix7916 2 жыл бұрын
A man with a so soft of a voice that carries a big stick . That thing is bad ass .
@classicmusclecarexhaust1988
@classicmusclecarexhaust1988 2 жыл бұрын
Imagine Julia Child saying on her cooking show "While we're waiting for our oven to heat up to 400 degrees, let's use our welder and our hacksaw to make a V-6 Suzuki GT750". This is the only channel where cooking tips are a natural fit on a motorcycle channel, and the only channel that makes removing screws actually interesting to watch. Loved this video!
@AllenMillyard
@AllenMillyard 2 жыл бұрын
She would have a load more viewers tuning in
@malcolmlane-ley2044
@malcolmlane-ley2044 2 жыл бұрын
Allen may appear to be a hugely talented engineer but in fact he is an alien that can create anything with basic tools in his shed, even his hacksaw can saw a straighter surface than a human can achieve on a milling machine
@doctordapp
@doctordapp 2 жыл бұрын
Thank you for sharing a look in your mind... Really a beautiful machine with an amazing sound!
@althejazzman
@althejazzman Жыл бұрын
I love how the cooking segment was narrated just like an engineering project. Food engineering.
@motorbikesandhacks
@motorbikesandhacks 2 жыл бұрын
I think "he didn't make the faring screws did he?" only to follow with of course he did. Amazing work, an inspiration to humanity.
@timhicks2154
@timhicks2154 2 жыл бұрын
Bikes, cakes, wildlife....something for everyone on here.
@troywee4774
@troywee4774 2 жыл бұрын
i love the sound of that mate, just perfect!! cheers for the share.
@leemidgley5394
@leemidgley5394 2 ай бұрын
I think Mr and Mrs Millyard should adopt me, as I could watch them all day. (I’m nearly 60 but that shouldn’t affect the legal process!) It’s tiring just watching a genius at work, let alone two, but I’m willing to make that sacrifice. Keep up the fantastic work! 👍
@firestorm755
@firestorm755 2 жыл бұрын
I can't describe how loud that 6 is! Alan ran it indoors at Alexandra palace about 3 years ago. It actually killed the microphone on my phone. It's beyond loud
@tonys6601
@tonys6601 2 жыл бұрын
It sounds gorgeous, I've been lucky enough to see and hear it three times, and have actually touched it! (with Allen beside me) Fantastic engineer, great guy, and amazing machines!
@alextripp1230
@alextripp1230 2 жыл бұрын
Hi Allen, what a beautiful machine.! Honestly a work of art. Great video, cheers, Alex.
@surdanwhatley2939
@surdanwhatley2939 2 жыл бұрын
I love the little break where you show us how Mrs Millyard makes Viennese whirls and then you show us how to make a 6mm Titanium screw; amazing engineering skills, something for everyone! Fantastic 👍
@Wingnut_Stickman
@Wingnut_Stickman 2 жыл бұрын
We finally see how Allen Screws are made. Har har. Excellent video, thank you for sharing.
@davidanderson1230
@davidanderson1230 10 ай бұрын
An absolute master piece of engineering. That's the Viennese whirls of course.... only joking!! Brilliant bike and sounds fantastic Alan, your skills and attention to details are off the scale. Thanks for a great video.
@AfricaTwin-Stuff
@AfricaTwin-Stuff 2 жыл бұрын
Beautiful engine sound, which I’m sure the even attendees could also feel. Now that’s something an electric bike will never be able to truely copy.
@Scowguy
@Scowguy 2 жыл бұрын
That is the most two-stroke sounding four stroke I’ve ever heard. Fantastic!
@worldhello1234
@worldhello1234 2 жыл бұрын
That is an insult, not a compliment and simply not true because it doesn't sound like a sack of nails like pretty much all two-strokes. :)
@razor1uk610
@razor1uk610 2 жыл бұрын
@@worldhello1234 some do, and so do some 4 strokes do too aren't that great either.
@terryhuggett3799
@terryhuggett3799 2 жыл бұрын
@@worldhello1234 sorry but I do hear that two stroke rip an I like it😁
@droceretik
@droceretik 2 жыл бұрын
Rubbish. The Honda 6 has a very distinct sound.
@richardraby6266
@richardraby6266 Жыл бұрын
That 6 sound is mesmerising but there appear to be only a few recordings of one "disappearing up the mountain" at full throttle with that haunting howl wafting on the wind, now that is truly memorable! Thank you Allan and Mr Honda for both showing mechanical genius.
@grapes008
@grapes008 2 жыл бұрын
Oh god that noise, that noise is the stuff that dreams are made of
@cjgordon22
@cjgordon22 2 жыл бұрын
The only guy that can accurately cut something with a hack saw lol.
@slvr1.618
@slvr1.618 2 жыл бұрын
I've run out of words to describe the engineering brilliance!!!!!great to see Charlie out and about 😂 and the baking made want as well!
@nickdifilippo4055
@nickdifilippo4055 2 жыл бұрын
This series is great Mr. Millyard. Sharing your hard work is greatly appreciated!
@Free_Ranger_CT110
@Free_Ranger_CT110 2 ай бұрын
The attention to detail is incredible & the sound, marvellous!
@1957kwick
@1957kwick 2 жыл бұрын
You’re the kind of guy I wish I had for a neighbor growing up as a kid. 🛠🇺🇸🛠
@CreosoteChris
@CreosoteChris 2 жыл бұрын
I always was (and remain) awestruck by Allen's fantastic engineering skills... ...but I'm beginning to think Tracy's cake-baking is even better!
@FIREBLADEONE
@FIREBLADEONE 2 жыл бұрын
This was simply terrific, what a machine! Loved the creature cameos and the baking demo too. A joy to watch from start to finish. Thank you!
@AllenMillyard
@AllenMillyard 2 жыл бұрын
Thank you for the kind words 🙂
@oscartravis5740
@oscartravis5740 2 жыл бұрын
I've never seen anyone make their own screws before, it was beautiful to watch
@craigkaschan4822
@craigkaschan4822 2 жыл бұрын
Thanks mate it’s a pleasure and a privilege to watch you work. 👍🇦🇺
@kz6fittycent
@kz6fittycent 2 жыл бұрын
That pigeon was totally saying, "WOOHOO!!"
@andrewknightley6799
@andrewknightley6799 2 жыл бұрын
Another riveting instalment in the Millyard saga, always a great watch and fills me with awe. I made my own screws just priceless.
@kcraig51
@kcraig51 2 жыл бұрын
Motorcycles, machine work and baking. Excellent combination!!
@SuccessShared
@SuccessShared 11 ай бұрын
Stonking stuff. Sammy Miller's is always worth a visit for the bikes, the people and of course a good cuppa with cake! Cracking day out!
@Mike.Howard
@Mike.Howard 2 жыл бұрын
I find using brass rods (with different sized tapped holes in the ends) make nice mandrels for polishing fasteners. Much better for your fingertips (and also your knees, when a screw catches & pings across your workshop floor!) Hope the Viennese Whirls came out perfect, btw!
@ResidentWeevil
@ResidentWeevil 2 жыл бұрын
I wish Allen Millyard was one of my next door neighbours. And Sam Lovegrove was the other one...
@blohmymind
@blohmymind 2 жыл бұрын
Wicked sounding bike. My neighbours would love to hear me coming home from work at 3am on this.
@chrisrhodes2595
@chrisrhodes2595 2 жыл бұрын
Another gem by the genius himself
@TheFlyingBusman
@TheFlyingBusman 2 жыл бұрын
I imagine that would be an amazing sight on a full size circuit. If Tracy is taking orders on the baking, I’m in 😁
@cleanadrainltd1246
@cleanadrainltd1246 2 жыл бұрын
Allen you amazed me so many times. Great video 👍🇬🇧
@gerrypowell2748
@gerrypowell2748 2 жыл бұрын
Always a pleasure to watch❤️
@67daltonknox
@67daltonknox 2 жыл бұрын
Reminds me of Brands Hatch in 1967 when I watched Mike the Bike ride a 250 six to victory in the 250, 350, 500 and unlimited races in pouring rain. As I recall Minter pushed him hardest until he fell off at Clearways.
@Boppa1260
@Boppa1260 2 жыл бұрын
Motorcycles bakeing and wildlife ,brilliant love these vids.
@caprimen
@caprimen 2 жыл бұрын
Brilliant video Allen lathe work and cookery I love it - the bike sounds unbelievable - itv will be ditching Henry and offering you prime time
@sjr999r
@sjr999r 2 жыл бұрын
I bet the resident alpacas at sammy millers jumped when the RC barked into life 👍🏼 Top work as ever Allen👍🏼👍🏼👍🏼👍🏼
@AllenMillyard
@AllenMillyard 2 жыл бұрын
They did
@marknewman1317
@marknewman1317 2 жыл бұрын
Genius is a over used word , but Alan is absolutely a genius. Great video and the sound of that engine ....
@ianfletcher5694
@ianfletcher5694 2 жыл бұрын
When you cut the slot in the screw you made I noticed you used a great trick of 2 -3 blades in the saw...great trick used it many times,,, cheers Ian
@tigertim20
@tigertim20 2 жыл бұрын
good spotting, but I couldnt help but wonder why he didnt just cut the grove in on the lathe cross slide. Its already set to dead centre!
@AllenMillyard
@AllenMillyard 2 жыл бұрын
@@tigertim20 The cross slide method is an option I use sometimes but this time I wanted to show how easy it is to use a hacksaw
@AllenMillyard
@AllenMillyard 2 жыл бұрын
strangely I only used one blade, but I agree it looks like there is two
@advanvan5540
@advanvan5540 2 жыл бұрын
It's been a long time waiting for it to finally upload, Mr. miliard, keep the spirit, sir, if you can upload videos often
@AllenMillyard
@AllenMillyard 2 жыл бұрын
I’m sorry I have a lot of ideas for new videos but it takes me a lot of time and it’s often weather dependant.
@advanvan5540
@advanvan5540 2 жыл бұрын
@@AllenMillyard Yes, it's okay, Mr. miliard, the important thing is to keep the spirit in making videos, greetings from Indonesia, because I'm from Indonesia
@FoodFestTelevision
@FoodFestTelevision 2 жыл бұрын
Great advice... from a man with no subscribers... 🙄
@advanvan5540
@advanvan5540 2 жыл бұрын
@@FoodFestTelevision who doesn't subscribe ?
@jeffzekas
@jeffzekas 2 жыл бұрын
@@AllenMillyard you mean to say there’s bad weather in the U.K.? Here in Oregon it’s 100F and fires everywhere!
@suffern63
@suffern63 2 жыл бұрын
Seriously,what an incredible talent.Not everyone agrees with the honours list I know but this man should be knighted.It's "only" a replica but this bike must be priceless.Electric motorbikes will never provoke such love.
@Ginga7r
@Ginga7r 2 жыл бұрын
Never mind that Dood Banksy You are a True Artist, Sir. I love watching lathe work I have the same Zeus measurement chart booklet, My Late father gave it to me 35 years ago.
@djfaber
@djfaber 2 жыл бұрын
When your homemade hand built motorcycle sounds like a modern F1 engine.... WINNING.
@kawall7140
@kawall7140 2 жыл бұрын
So so clever so laid back this man is genius on another level
@memsybabe
@memsybabe 11 ай бұрын
Keep coming back to these vids every so often. Every time I watch them, I'm just amazed by the pure genius that is Mr Millyard. Fantastic.
@philipashley1517
@philipashley1517 2 жыл бұрын
Just bloody brilliant mate,,👍🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧
@MrLukealbanese
@MrLukealbanese 2 жыл бұрын
Absolutely superb Allen.
@alanbond1269
@alanbond1269 5 ай бұрын
Always next level Allen. It's never that will do. Your a perfectionist. Great watching you work your magic
@simon2knine
@simon2knine 2 жыл бұрын
I just can't get enough of these video....Keep them coming please..
@walkingpictures
@walkingpictures 2 жыл бұрын
Yet another great video Allen,complete with news from the kitchen and wildlife in the garden,thankyou for posting,just perfect 😁
@XKclassHater
@XKclassHater 2 жыл бұрын
I've been watching this series since freakin 6AM. its so cool!
@kimnorrgren9468
@kimnorrgren9468 2 ай бұрын
What an honor to restore and run Mike Hailwoods bike. ❤ Wonderful rescue!
@natefessler3961
@natefessler3961 2 жыл бұрын
Motorbikes, cupcakes, and hedgehogs, oh my! This is a lovely little corner of the internet to come and visit. Keep up the great work!
@SteveVanSwearingen
@SteveVanSwearingen 10 ай бұрын
Awesome craftsmanship!! Looks just like my 1/12 Tamiya RC Honda I built about 55 years ago, but so much better and wow, a lot louder!! Thanks for your teaching us how the impossible can be done. Cheers, SC Van Swearingen, PE, CEng
@davidhome4975
@davidhome4975 Жыл бұрын
I thought i was alone with how i think, but then you appear, proper old school engineer. Man to my old heart. Thankyou for sharing your genious👍
@antoniomassey8328
@antoniomassey8328 2 жыл бұрын
Excellent bit of work Allen and I could watch you all day all the best Tony
@outlawking4106
@outlawking4106 2 жыл бұрын
Your knowledge, engineering and craftsmanship is outstanding Allen, all your bikes are works of art
@markhensley9378
@markhensley9378 2 жыл бұрын
Your motorbikes will be the stuff of legend long after we're gone. Thanks again for sharing your builds with us!
@andya857
@andya857 2 жыл бұрын
His genius is in a Class of its own, I mean really..Kudos my man...
@MrGodsking
@MrGodsking 2 жыл бұрын
there is no doubt about it,this man is a pure genius in every way,and while we are on it the world needs a 6 pot yl1 with extra gears and alan is the one that can pull it off
@ScotDouglas
@ScotDouglas 2 жыл бұрын
I really enjoy your soft voice and demeanor when contrasted against the RC374. Brilliant machine, Mr. Millyard.
@malcellison8831
@malcellison8831 2 жыл бұрын
That bike is yet another tribute to your amazing skills and imagination. A pleasure to watch.
@andreVE4BK
@andreVE4BK 2 жыл бұрын
Another great informative video Allen! Still amazed at your mechanical prowess and genius… I always learn something. Than you!
@alistairbernard9574
@alistairbernard9574 Жыл бұрын
Brilliant video. You are a Genius Mr. Millyard. Absolutely and throughly enjoyed your story. ❤
@kr46
@kr46 2 жыл бұрын
With living abroad If I want to feel my old British Shed feeling I watch Allen as I have done for years, someone and something we can be proud of, Thanks Al .
@thebear6529
@thebear6529 2 жыл бұрын
Incredible machine!! Allan you continue to be an inspiration to me. God bless you and your hands!! What a beautiful bike.
@ikral11
@ikral11 2 жыл бұрын
Perfect as always, made my morning after the night shift at the factory. Now I can go to bed, dreaming of motorcycles.
@arankthnar
@arankthnar 2 жыл бұрын
Your work is so beautiful. So precise. So well manufactured. Bravo from France.
@emilmarian9964
@emilmarian9964 2 жыл бұрын
Such a beautiful work of art.. kudos Millyard 👏
@eaglestrikes1
@eaglestrikes1 2 жыл бұрын
This is one of my favourite bikes ever. What a build, what a sound! I get goosebumps every time I see it (Or hear it) great work
@davedebucket165
@davedebucket165 2 жыл бұрын
Love watching you on the lath making something, you make it look so easy, love your bikes.
@joegoncalves2496
@joegoncalves2496 2 жыл бұрын
Really these are the most satisfying videos to watch and listen to. Incredible! And that RC sounds out of this world!
@michaelbrookover8018
@michaelbrookover8018 2 жыл бұрын
I feel like I win the KZfaq lottery with every new episode. I thoroughly enjoy these and look forward to each one. Thanks for sharing your gift and passion as well as the baking and nature. It’s very genuine, entertaining and educational. Cheers for OH USA
@johnwoody9505
@johnwoody9505 Жыл бұрын
I was just talking yesterday to a friend about my time as an apprentice in the machine shop some 60 years ago. Seeing you making the aluminium screw from start to finish was a reminder of my time on a few lathes etc over the 6 months in the machine shop. I really enjoyed the complete job making the screw, not so interested in the cake making though. I saw Mike Hailwood at Brands hatch on a 4 cylinder Honda I seem to remember. An enjoyable 15 minutes watch.
@van31974
@van31974 2 жыл бұрын
Only in the UK you see a very interesting video off a true technical wizzard, and the making off some cookies. Thumbs up and what a humble man.
@DOOM1715
@DOOM1715 2 жыл бұрын
As always your attention to detail is on another level entirely. Fantastic work 🙌🏻🙌🏻
@thejudgehasjudged
@thejudgehasjudged 2 жыл бұрын
Thanks Allen, another awesome video. That bike's a slap in the face when started. Love it
@philiplee7604
@philiplee7604 2 жыл бұрын
Allen, your Honda 6 replica is an engineering masterpiece!… and that exhaust sound is euphoric!!!
@martynrandles
@martynrandles 2 жыл бұрын
I love all of your videos Allen, you truly are a National Engineering Hero! Love the baking breaks, have really helped me appreciate the finer side of cake making & made me a much better baker... now if only I could somehow gain 5x thou' of your engineering knowledge I'd be on the path to turning my 1st handmade screw!
@peterdeen3545
@peterdeen3545 Жыл бұрын
This channel, and build series is a true treasure. So glad I found it.
@jimclements3190
@jimclements3190 2 жыл бұрын
That was a unexpected Thursday bonus,thank you Allen, brilliant sounding bike by the way🤗👍🏁
@rdaystrom4540
@rdaystrom4540 2 жыл бұрын
Very nice presentation on making the screws. I like that. Allen's attention to detail is what makes his creations look like factory products.
How its made -  Alloy tank, fairing and seat hump - RC374 episode 7
22:20
Honda XL175 engine repair
13:20
Allen Millyard
Рет қаралды 628 М.
Мы никогда не были так напуганы!
00:15
Аришнев
Рет қаралды 6 МЛН
ОДИН ДЕНЬ ИЗ ДЕТСТВА❤️ #shorts
00:59
BATEK_OFFICIAL
Рет қаралды 8 МЛН
OMG🤪 #tiktok #shorts #potapova_blog
00:50
Potapova_blog
Рет қаралды 18 МЛН
Allen Millyard gets his teeth into a French Fancy
5:55
Henry Cole TV
Рет қаралды 141 М.
Millyard - Honda SS100 V Twins, riding,  maintenance and tips
16:24
Allen Millyard
Рет қаралды 608 М.
Guy Martin onboard a ROTARY bike
16:45
I Like Motorbikes
Рет қаралды 3 МЛН
Millyard Kawasaki H2A 1000 four cylinder - Maintanence tips and ride
19:11
Millyard RC374 Honda six replica - Episode 1 - How its made
15:02
Allen Millyard
Рет қаралды 414 М.
Kawasaki Z1 Super six clutch and a weekend at Goodwood revival
16:32
Allen Millyard
Рет қаралды 174 М.
Honda 250cc 6 cyclinder replica
6:13
Racing Home
Рет қаралды 181 М.
Respect🥺
0:35
Armada Motors
Рет қаралды 1,7 МЛН
Что делать, если отказали тормоза?
0:12
Mustang Shelby GT500: The Ultimate Muscle Car
0:14
9EPIC
Рет қаралды 4,1 МЛН