Milwaukee 1in VS: Dewalt DCF900 1/2in Round #2

Рет қаралды 44,227

Жыл бұрын

wheels and lugs had been on this truck for 4+ years. lots of rust build up on the threads. I had only put the Milwaukee on the first lug nut , and only on tighten. the others were untouched , by any impacts since the last tire/brake change over 4 years ago.

Пікірлер: 162

@jeffmorefield Жыл бұрын

Cool video bro! The 900 is an absolute beast! I'm currently working on a video on it. Good job.

@jdogdiesel7242 Жыл бұрын

Thank you! I really appreciate it! The internets a weird place where usually everyone will criticize what you did and say what you should do differently. Last video on this they said i didint hammer on it long enough .... And others complained about torq specs and yada yada lol Id say nether of these could fully replace the other but unlike what Milwaukee guys say this new dewalt is a whole new level! Link your vid/channel and Ill definitely check it out. Subscribe if you like this kinda stuff. I have 3 total vids on this dcf900 and plan to do alot more

@danyo1972 Жыл бұрын

I have the DCF899, I still having met a bolt it couldn’t beat. The 900 must be an absolute beast..

@vintajecheese7803 Жыл бұрын

So many people forget/don't know that the torque going counterclockwise is higher than clockwise, either way I'm real impressed with the Dewalt.

@jdogdiesel7242 Жыл бұрын

Yes , with the dewalt its 1030 ftlbs clockwise , 1400 ftlbs counter clockwise Vs the Milwaukee 1in extended anvil which is 1900 ftlbs clockwise , 2000ftlbs counter clockwise Thoes ratings are from each manufacturer and we all know they are usually off from real world numbers. I will say from using the Milwaukee 1in impact for about a year it feels like its over rated by Milwaukee . Especially compared to common air 1in impacts. The dewalt seems like they underrated it as it will rip anything off that 1in gun puts on. It ether loosens the fastener , breaks the fastener or breaks the socket . Its a complete animal and is almost over powered for just 1/2in drive. It beats the dewalt 3/4 , Milwaukee 3/4 and all the air 1/2in guns ive put it against.

@brianklein6387 Жыл бұрын

Hell yeah finally one of these videos where the user actually has a 1/2 dr 1 5/16 or 33mm socket instead of a 1/2 to 3/4 adapter I'm a industrial mechanic & I have deep & shallows up to 1 1/2 inch in 1/2 dr great video I have ingersoll rand w7152 & might buy this dewalt

@jdogdiesel7242 Жыл бұрын

Yeah Ive seen a few of thoes videos and it really bugs me. When testing or reviewing an impact the correct socket has to be used otherwise the end result is less power applied to the bolt or nut. This dewalt dcf900 is takin over my tools lol i havint touched my ir 2235ti 1/2in air or my mg1250 snap on air 3/4in gun since ive had this new dewalt. Its not a total replacement for all air impacts and def not a replacement for a good extended anvil for semi wheels , BUT it has yet to let me down. It rips any nut or bolt out that any of the other impacts in the shop have installed air or electric. After running it for awhile it feels like dewalt is under rating it at 1030ftlbs tighten / 1400 ftlbs loosen . Which is rare nowadays for any thing really. To get more than you expected or more than they advertise. Thanks for the comment! Please subscribe for more tools and shop content !

@brianklein6387 Жыл бұрын

I use my astro 1894 thor gun for about 6 months when I got air available it's stronger than coworker snap on gun & way stronger than IR2235TIMAX & it was cheap as hell

@ns_racing Жыл бұрын

I have the DCF891 and its a monster mid torque. Getting the 900 powerhouse soon

@jdogdiesel7242 Жыл бұрын

You wont regret it! Its a beast to run!

@patmason7276 Жыл бұрын

Just bought the 900. The longer extention on the Milwaukee doesn't help but the Dewalt is a beast.

@jdogdiesel7242 Жыл бұрын

That Milwaukee is an extended anvil. Not an extension. Its made for reaching into wheels to get recessed lugs. I really cant compare the two , but its closer than trying to compare the dcf900 to the m18 2767 lol Thats not even close. Milwaukee needs to step up their 1/2in game big time to beat dewalt.

@GodsBattleAx Жыл бұрын

Beast

@dannyrivera7017 11 ай бұрын

I was once a fan of Milwaukee and I still have quite a few hand tools, but over time I replaced all my tools with Dewalt. Nowadays I think the balance leans towards the yellow brand, being more versatile in many aspects, even in my old Makita or ryobi I use an adapter that makes it possible to use them with their Dewalt batteries, it should be noted that I use impacts a lot and they are very good at breaking screws that are too attached and I don't dislike that at all🤣

@robertkutch9143 Жыл бұрын

LOVING your videos man! This is GREAT! Milwaukee Fangirls around the 🌎 GLOBE are loosing thier minds 🧠 right now! But they'll still say Milwaukee is better than Dewalt, 😄🤣 haha which is no longer true!

@jdogdiesel7242 Жыл бұрын

Thanks man! I really appreciate it! I got more vids coming every few days

@Lee-lb9qh Жыл бұрын

Agee all the way, Milwaukee no longer on the top

@jdogdiesel7242 Жыл бұрын

@@Lee-lb9qh they used to be. For a very long time. But just in this year it seems that many brands have surpassed them in a big way. And dewalt showed up ready to party and knock them down a few notches

@Lee-lb9qh Жыл бұрын

Here come the Milwaukee fanboy tears 😂

@jdogdiesel7242 Жыл бұрын

Lmao!! Oh man! Yeah they always find somthing to say , they cant say it wasint a fair fight. Hell the Milwaukee is running a 12ah battery and the dewalt is only running a 9ah this time. The last 2 videos i was only running a 5ah on the dewalt. Ether way. This was definitely set up in Milwaukee's favor for power ratings , drive size , battery size and impact size.

@YaksAttack Жыл бұрын

I'm a Milwaukee fanboy but I'm looking for some impacts for home for working on my car and I'm leaning towards DeWalt because they just seem better imo

@jdogdiesel7242 Жыл бұрын

@@YaksAttack well especially now after all the issues Milwaukee is having with their 1/2in high torque impacts. Seems the b model 2767's are grenading , stripping out and failing in the planetary gears and pins. Also some are having electrical problems which seem to plague even some a models too. Ether way the new dewalt is just killing it. I really dont think 1/2in drive stuff can handle more power than what this puts down. Its hell on sockets and hell on tight old bolts lol if they wont come out it will break them.

@michaelfoster9964 Жыл бұрын

@@YaksAttack unless your daily driver is an incredibly dirty big rig,or you park your vehicles in 6 feet of saltwater for two years at a time, you’re absolutely fine with a mid torque, and the old Milwaukee high torque for the most stubborn of shit. Those new dewalts are real nice though, but not nice enough to change platforms if you’re already heavily invested in a different one.

@ericg4915 Жыл бұрын

@@michaelfoster9964 I live up north and our roads are caked in Salt for half the year and I see plenty of stuff the high torque can't break. In my opinion that extra 100 or 200 ft pounds can be a life saver

@leowashington8991 Жыл бұрын

WINNER!

@ilikepie2737 Жыл бұрын

I gotta know. Could you try the new hercules "Ultra torque" on those? I'm so damn curious if that could do it but I don't have any large equipment to try it on.

@jdogdiesel7242 Жыл бұрын

I dont own one but if i can borrow one at some point for a review video i will

@jdogdiesel7242 Жыл бұрын

Also , im sure itd do better than a new Milwaukee 2767 lol

@cloudy4872 5 ай бұрын

Dewalt should really make a 1” impact. It would be insane

@bonzology322 Жыл бұрын

I'm a CA LicB Remodeling Contractor since 1998, my knack boxes are loaded with at least 2 tools of almost every brand, i have more dewalt tools in use than any others, i especially dig the flexvolt 60 pieces, in my estimation they finally crossed a threshold to not needing corded tools anymore, the only corded tools i still use are wormdrive skill saws, the 60v wormdrive esque Dewalt saw lacks the gyroscopic stabilization effect i never knew was in a skill saw until i tried the Dewalt, i can't cut a straight line with it to save my life. I also have a💩ton of milwaukee tools at the bottom of my knack boxes because they all broke and need repair, they just never stood up, namely hole hawgs, corded impact drives, sawzalls and chipping hammers, they just never lasted for me, at this point in my career i only bother with what gets the job done quickly and reliably so it's not worth me repairing that stuff over the last 25 years. I'm sure they're better co now but haven't really given the milwaukee fuel 18v line a try because i'm so embedded in the dewalt ecosystem, if it ain't broke don't fix it

@flat-earther Жыл бұрын

hi bonzology have you become a flat earther yet? If not I suggest watch a 13 part series called _What on earth happened_ by Ewaranon to learn that the earth is not a globe. I got it in my about tab.

@bonzology322 Жыл бұрын

@@flat-earther nah, i'll just watch from the globe earth as you flathead mouth breathers stick your heads up your own rse's repeatedly and preach with💩on your faces 😂

@gabeg4062 Жыл бұрын

We’re you in reverse w/ the d Handel or tightening to show the Dewalt? Does the d handle remove stuff that the Dewalt won’t? Thx for the video comparison!

@jdogdiesel7242 Жыл бұрын

The m18 d handle 1in impact was in tighten , to show that even when i really hammer the hell out of a fastener with the big Milwaukee the 1/2in dewalt will remove it. The dewalt is rated at 1030 ft lbs tightening , and 1400ftlbs loosening . The Milwaukee 1in d handle is rated at 1900 ftlbs tightening and 2000ftlbs loosening. Id say some ones ratings are lying...... And in my opinion id say the dewalt is underrated from the factory. As it seems alot stronger than 1030/1400

@shanebraithwaite3922 Жыл бұрын

Just upgraded from a DCF899 to A DCF900, already this thing is a massivee leap forward just snapped an m14 10.9 grade caliper carrier bolt . It undoes stuff on the 1st setting the 899 couldnt undue on 3 its an absolute beast!

@mick5740 6 ай бұрын

This is a good comment! As I just got the atomic stubby for brake and suspension work mostly. It is not strong enough to get out a few of the rusty wheel hub bolts 05 Dakota rust special. So I’m looking for more power. So I’m looking at 891 for about double power mist say it probably good for almost everything or to go way big the 900. Now I don’t want to be snapping bolts off so maybe 891 is better suited to auto and truck suspension work ?

@hammerheartdan6311 Жыл бұрын

I have mostly milwaukee tools, my brother has all dewalt (apart from an M18 fuel grinder he absolutely loves) now he wants an 2767-20 M18 1/2 high torque like i have cause he loves it but i keep telling him to go with the DCF900 cause they are just as good and he’ll end up buying a problematic “B model” 2767-20.

@jdogdiesel7242 Жыл бұрын

The A model also has electrical issues with cutting out and trigger delay. Ether i would try to get one made last year , or wait untill they fix all their problems, or go a diff brand. Ive had no problems with dewalt at all in 10-12 years running them on heavy diesel repairs , shop , roadside you name it.

@jdogdiesel7242 Жыл бұрын

Another plus to the dewalt dcf900 is it beat out all the other brands on max reverse torque . Ttc- torque test channel has a running list of all the impacts over the past 4 years , every brand , model and size. They test them usually right after they are released. The strongest highest rated 1/2in is the dewalt dcf900 currently. Beating Milwaukee by 200+ft lbs

@hammerheartdan6311 Жыл бұрын

@@jdogdiesel7242 I’ve had my 2767 for almost 5 years, zero electronic issues, doesn’t skip a beat. Though it used to be the benchmark for 1/2” guns on TTC, it does need a serious boost/makeover, but for a model that’s 5 years old, it still holds it’s own. I’m truly impressed by the new DCF900 though, that’s why I told my brother he should get one. I wouldn’t want him to end up the newer problematic 2767 B model and be let down.

@jdogdiesel7242 Жыл бұрын

@@hammerheartdan6311 yes the 2767 used to be the best 1/2in cordless you could buy. One of the most dependable as well. But in the last 6 months Milwaukee's qc has plummeted on alot of m18 an m12 tools. They just are not as reliable as they used to be. The trigger issues effect both the a and b models made from the last 6 months or so. Ttc also did a video on both models having problems recently.

@dchawk81 Жыл бұрын

I'm just thankful to only be 2 tools deep into Milwaukee with one being the grease gun and the other being a 2021 A model 2767. I don't have to worry about the battery system influencing future purchases.

@zin6749 Жыл бұрын

The Milwaukee damn near shook the battery off

@jdogdiesel7242 Жыл бұрын

The big Milwaukee impacts have that problem alot. So much so that they make battery straps lol

@justinpearce8731 Жыл бұрын

The Milwaukee 1” impacts have a battery isolation feature that basically allows the battery to “float” so the full force of the impacts are not imparted on to the batteries. That being said it doesn’t look great on that video lol

@jdogdiesel7242 Жыл бұрын

@@justinpearce8731 that may be true but once we get battery connectivity problems , strapping the battery to the impact is the only solution ive found. Milwaukee impacts are good about that

@jamesstefanson652 7 ай бұрын

Dunno whyd you own either of those. I use my 2767 everyday for the last 4 years. Semi lug nuts are not a problem for this guy.

@angelf9800 10 ай бұрын

That’s a beast lol

@ericg4915 Жыл бұрын

Man and I know that dewalt is a wrist breaker and socket ruiner that things got balls

@jdogdiesel7242 Жыл бұрын

Thats the truth! It likes to tear up drive ends of 1/2in sockets. Really waiting for the 3/4in version to come out. Thats gonna be on a whole new level! This dcf900 is at the limits of the 1/2in drive size

@Vega02flaco Жыл бұрын

Nice dewalt impact wrench. Can you do one more test this time on the milwaukee on setting #4.?

@bgs4896 Ай бұрын

Got me one of boyy😂

@christianb9565 Жыл бұрын

I vastly prefer the Milwaukee tools for working on my vehicles but I am incredibly disappointed with their 1" extended anvil impact. The IR dual 5amp battery competitor puts the Milwaukee to absolute shame. Honestly I figured they would have come back with a better, actually competitive product by now...sadly they have not.

@1x4x93 Жыл бұрын

Holy💩!

@Wilbargosh Жыл бұрын

My Isuzu truck wheels stud loosen clockwise and tighten anticlockwise. Important to know, otherwise the layperson will not be able to get the wheel off, even with a Dewalt!

@jdogdiesel7242 Жыл бұрын

Yes , thats somthing the rookie mechanics usually learn the hard way. We do lots of work on isuzu npr's , lots of king pin jobs , brakes , tires etc. My dewalt has no problem taking thoes lugs off in ether direction.

@RIKO07104 Жыл бұрын

Не обманщик, а волшебник.

@DON_TOOLS Жыл бұрын

I own that 2869 milwaukee and damm that dewalt has balls lol Ima have to order me one asap

@jdogdiesel7242 Жыл бұрын

For a half inch gun it bangs pretty hard. Acts like a 3/4 gun. It beats dewalts own 3/4 impact and Milwaukee's 3/4. Only down side is it will eat up some sockets and your wrist lol

@jdogdiesel7242 Жыл бұрын

If you do get one , id recommend running a 6ah or bigger pack on it. A 5ah is bare minimum. Noticable bump in power with a 6 or 9ah though

@DON_TOOLS Жыл бұрын

@@jdogdiesel7242 just ordered one from my local lowes. Got few 6.0s ready ill be running some tests myself lol

@jdogdiesel7242 Жыл бұрын

@@DON_TOOLS lowes had the dcf900 in stock? Nice!

@DON_TOOLS Жыл бұрын

@@jdogdiesel7242 yeah picked it up yesterday waiting on the protective boot for it to deliver to put it through the ringer

@ifm8080 Жыл бұрын

Incrível

@jakekoch1450 Жыл бұрын

Sorry to throw my two cents in here but if you look closely when he picks up the Milwaukee between 35 and 40 seconds in you can see the #3 setting is lit up!!! You don’t even have it at full power!! I have both tools and will say the dewalt is a beast but my Milwaukee still takes the cake when it comes to heavy duty!!

@BenJamin-ou7kd Жыл бұрын

Will the Milwaukee take the other lug nuts off???

@jdogdiesel7242 Жыл бұрын

Yes , it gets used every day for these 33mm lug nuts on trucks and trailers. Somtimes if one is very crusty and very tight ill have to just switch to the air 1in impact.

@thalegacy6 Жыл бұрын

Milwaukee fan here, that Dewalt is a effin beast! That being said, is there a difference in power with in the Bluetooth mode and mode 3? It sounded like it wasn't hitting anywhere close to what some of my other Milwaukee tools put out. To the other Milwaukee fan boys give credit to Dewalt for making sure your favorite company isn't giving you trash and making you pay more for it (APPLE)

@jdogdiesel7242 Жыл бұрын

Ive ran it on 4 on a few vids and on bluetooth which in the ap its set to 4 also even in bluetooth. But on the next one coming up ill run it on 3 just to see. But this thing runs truck an trailer lugs every day with no issue. Ive been surprised alot by running this dewalt next to it and on alot of other rft stuff (really fu**in tight) Its no replacement for an extended anvil wheel gun but damn its an animal. More vids of both impacts to come! Thanks for commenting!

@PageMarker1 Жыл бұрын

I went DeWalt on a Labor Day sale a couple of years ago, so they're homeowner's light duty. I consider Milwaukee a superior brand overall. I'm using a 2012 MacBook Pro. You get what you pay for..))

@jdogdiesel7242 Жыл бұрын

@@PageMarker1 kzfaq.info/get/bejne/n9ujidKSl5fIkYU.html A whole lota pissed off superior brand Milwaukee guys....

@TacticalThib 4 ай бұрын

@@jdogdiesel7242 you had it in speed 3 not 4 I think you have something fked up in the app that's limiting rpm or did you do this on purpose for views? I have bolth of these guns and several others and that's not full speed on the Milwaukee brother

@akif6162 Жыл бұрын

That milwaukee looks so beat up the battery was damn near falling off lol

@jdogdiesel7242 Жыл бұрын

Most all big Milwaukee stuff has the battery shake problem. Its so bad that they make battery straps for these. The gun is dirty but its only a few months old.

@wendellgreenidge3362 Жыл бұрын

This was a stupid test because it take less torque to remove a fastener than tighten it. Obviously the 1” impact makes more power whether it’s Milwaukee or not. And I like dewalt more than Milwaukee

@flat-earther Жыл бұрын

hi wendellgreenidge have you become a flat earther yet? If not I suggest watch a 13 part series called _What on earth happened_ by Ewaranon to learn that the earth is not a globe. I got it in my about tab.

@wackyweyland8857 Жыл бұрын

That's depressing to see a 800 dollar impact wrench lose...

@jackofalltrades123 Жыл бұрын

I'm a dewalt fanboy and that tool is super powerful but it vibrates like crazy! Much more then the milwaukee impact wrench. Just being fair

@shanebraithwaite3922 Жыл бұрын

yeh you gotta hold on for dear life

@dr_tal Жыл бұрын

I'm afraid to tighten the lugs on my car with this. I've replaced enough studs already

@obfuscated3090 Жыл бұрын

Impacts are NOT for installation of lug nuts/bolts. They're fine for RUNNING those fasteners so I use little 3/8" drive impacts for that (no point in using a big gun) then final torque by calibrated wrist (I'm ancient so mine works well) or torque wrench

@Thrasher6299 Жыл бұрын

Milwaukee setting was on 3 not 4

@georgeoganesyan9512 Жыл бұрын

idk what the hype is behind milwaukee... Dewalt been outdoing them by a long shot last year

@slingin_tires Жыл бұрын

Yea, i'd like to know why Milwaukee is still the popular brand when their clearly not as good as DeWalt etc.

@jdogdiesel7242 Жыл бұрын

Milwaukee was the leader for along time. Alot of people and companies bought into the 12 an 18v stuff . Hard to switch now when you have $3k in red

@tonyruiz347 Жыл бұрын

Milwaukee fans are switching to yellow now!😂

@jdogdiesel7242 Жыл бұрын

Seen a few guys make the switch recently , mainly because of the new mid torque 1/2in dewalt and this new high torque

@tylerpetrus6762 Жыл бұрын

It looks like you had the milwaukee in speed 3 instead of speed 4.

@hksjoshua Жыл бұрын

Damn dewalt just dropped the mic.

@jdogdiesel7242 Жыл бұрын

Lol yeah thats a good way to say it! They really have been steppin up their game over the past year. With all the new impacts they have released.

@hksjoshua Жыл бұрын

@@jdogdiesel7242 yea their 12v 901 and 903 are beasts, the 3/8 milwaukee stubby is the loaner tool now lol. Glad I never got the milwaukee high torque now I'm grabbing a 900 along with the biggest 21700 cell battery pack dewalt has, I think the 6ah has 20700 cells?

@jdogdiesel7242 Жыл бұрын

@@hksjoshua the 15ah is the biggest battery dewalt has that would work with the 900 But i think a better size match with the good 21700 cells would be the 9ah flexvolt

@user-bl8np5nq9w Жыл бұрын

Удлинитель убери,и он тоже открутит.

@mikethetoolguy Жыл бұрын

The new Dewalt is definitely powerful. Long term testing will tell whether the durability is there or not. Anyway, I think most high torque wrenches would remove a fastener after you’ve effectively used an air hammer on it.

@dtn2490 Жыл бұрын

Too many unknowns in the extra extension and different socket. Please try the same socket on both drivers!

@jdogdiesel7242 Жыл бұрын

No extension. The Milwaukee is a 1in drive extended anvil. The dewalt is a 1/2in drive reg anvil. BOTH have the correct 33mm socket for these truck wheel lug nuts. The Milwaukee factory specs are 1900ftlbs tightening , 2000ftlbs loosening . The dewalt specs 1030 ftlbs tightening , and 1400ftlbs loosening. The Milwaukee is not as strong as some people think and the new DeWalt dcf900 is ALOT stronger than alot of people think. Anything this big Milwaukee installs , the dewalt will remove. No problem. So one brand is lying on specs....

@dtn2490 Жыл бұрын

@@jdogdiesel7242 Thanks for clarifying up the built-in extension. Anyone know if the @TorqueTestChannel has tested these two?

@jdogdiesel7242 Жыл бұрын

@@dtn2490 yes they have ! If you search on youtube - dewalt dcf900 their video testing it should be within the first few results. The Milwaukee videos were much older and im sure you could search thoes as well. They did 2-3 videos on the big m18 1in drive

@tommygarza8043 Жыл бұрын

Wt the freak just happened here man???? Thus is real and not fake wt the freak just happened here????😮

@jdogdiesel7242 Жыл бұрын

Yes its real. The lugs had been on this truck for more than 3 years. Just for good measure i set the big 1in drive Milwaukee gun to tighten , and hammered down on the first lug nut . It wasint budging . Then the dewalt dcf900 ripped it right off Then i thought well screw it ill try a few more. And it pulled thoes off too. Took a little longer on the last few but hey. Its a pretty awesome 1/2in impact

@Dee-EH2 7 ай бұрын

Ahh so you left the power on the milwaukee at 3 instead of 4 to prove something.....

@TheMetalButcher Жыл бұрын

Love Dewalt, but that Milwaukee was not in high mode.

@jdogdiesel7242 Жыл бұрын

It was in high. I have another video , same deal , i show the settings on both impacts right before putting them on the lugs and pulling the trigger. No tricks , no special effects. And no matter what setting i put the Milwaukee in before i tighten anything with it, the dewalt will always remove whatever it is. Milwaukee 1in d handle is rated for 1900ftlbs tightening , the dewalt is rated at 1400ftlbs loosening. Someone's lying ..... And id say the dewalt is the one thats Under rated from the factory in my opinion.

@garybergstrom3978 Жыл бұрын

Put both of them up against 1” drive Ingersol rand and see how they do 😂

@px_gc8 Жыл бұрын

Do a reverse using the dewalt to tighten then use the milwaukee to loosen.

@noeaguilar4542 Жыл бұрын

Milwaukee lo puso en lo mínimo de velocidad por eso no saco el tornillo

@anselhousworth1941 Жыл бұрын

I'd check your one-key app and see how your 1" is set up. it could be in a less powerful mode for reverse. the Milwaukee 1" should be able to break those loose no problem.

@ridgidhightorque9680 Жыл бұрын

Milwaukee was in reverse

@andreyk976 Жыл бұрын

Ну если на DeWalt закручивать гайки то они тоже не выкрутится

@Stas007 Жыл бұрын

Да ты чего слепой?, он на милке выставил 3й режим вместо 4го, и через приложение ван кей занизил обороты, поэтому милка на 3м режиме работала на 1200Nm, в то время как девалт 1800Nm. Вот и вся магия.

@user-jg1bs3hn7v Жыл бұрын

Что за колдунство? Я думал так не должно быть.

@TacticalThib 4 ай бұрын

😂 it's in speed 3 not 4 so you go into speed 3 go into speed 2 with the DeWalt!! Idk if you missed that the Milwaukee wasn't in high speed or you did it to be malicious and deceiving?

@emanuelh7007 Жыл бұрын

Bro you gotta be kidding that Milwaukee was not in high torque number 4

@jdogdiesel7242 Жыл бұрын

In both videos it is. All of the lug nuts were already tight. Been on that truck for years. Milwaukee was on forward as to tighten it even more. Supposed to have 1900ftlbs in forward. Anything this 1in Milwaukee puts on or tightens, this dewalt will remove. And the dewalt is only rated at 1400ftlbs reverse. So id say one brand is exaggerating more than the other.

@casiocasio9903 Жыл бұрын

Переключи Milwaukee на 4 скорость

@slukva Жыл бұрын

👍😆

@tomasrasimavicius2291 10 ай бұрын

Don't forget that milwaukee has an app where u can control torque on settings 1-2-3 and 4 😅so basically u can lower torque on setting 4😅 plus the light was on torque level

@baymurzaevotabek9989 Жыл бұрын

😂😂😂😂😂😂😂😂😘

@billyclayborn4990 Жыл бұрын

Impossible!!!!

@jdogdiesel7242 Жыл бұрын

Yes its all smoke an mirrors. Just a camera trick ;)

@dylansschuldt6480 Жыл бұрын

Put the milwaukee on lvl 3 and no the bluetooth mode im sure it will be alot different

@jdogdiesel7242 Жыл бұрын

Ok i got more videos coming up and i will give that a shot

@juniortulio1989 Жыл бұрын

I think milwauke is broken🤣🤣🤣

@RblSb777 Жыл бұрын

Ну что за проплаченная брехня дэволт 1800N Милуоки 2700N и хочет сказать что дэволт сильнее на Милке батарея разряжена

@corybaird4037 Жыл бұрын

Dewalts don’t last

@jdogdiesel7242 Жыл бұрын

The dates on my dewalt batteries and tools say otherwise. Used daily workin on diesel trucks and trailers , shop and field work. Some stuff in use dated as far back as 2014 still in use. Even the newer stuff like the dcf900 , almost a year being used and abused. Thrown around on concrete and greasy every day. Still hits like new.

@jdogdiesel7242 Жыл бұрын

The oldest dewalt i have still in use at work is from 2010. Corded 1/2in chuck drill. Beat to hell but Still will wrap your arms in a knot.

@slingin_tires Жыл бұрын

I'm glad your wrong, my dad an i have 50-60 DeWalts ranging from 10yrs old to new. They last great.

@cismoautorepair7061 Жыл бұрын

you loosing it for DeWalt you think we're stupid put Milwaukee Head to head and you see what's up DeWalt hahaha

@jdogdiesel7242 Жыл бұрын

The dewalt is a 1/2in drive running a 9ah battery. The Milwaukee is a 1in drive running a 12ah battery. If it was the Milwaukee 1/2in impact then itd be no contest. The new dewalt dcf900 crushes the Milwaukee 1/2in . Anything the 1in m18 hammers on the lill 1/2in dewalt will remove no problem.

@cismoautorepair7061 Жыл бұрын

@@jdogdiesel7242 i don't believe nothing that you r saying

@jdogdiesel7242 Жыл бұрын

@@cismoautorepair7061 i really dont care if you do... There are plenty of youtube channels way better than mine that show the new dewalt dcf900 beating the 1/2in Milwaukee. If i had a 1/2 Milwaukee id make a video proving just that. Torque test channel did a video on the dcf900 , it put down 200 MORE ftlbs than the Milwaukee 1/2in gun. Shop tool reviews did a good video on it as well. Do your own research on it. Or dont. I really dont care ether way.

@hillbike4515 Жыл бұрын

exactly I saw it on the singlecams channel it wasn't even that powerful bro. Milwaukee is still king

@jdogdiesel7242 Жыл бұрын

@@hillbike4515 you cant find a video of the 1/2in dcf900 dewalt getting beat by a 1/2in Milwaukee... Every test from multiple channels , over and over show Milwaukee in 4th or 5th place behind snap on , matco and dewalt.