If you'd like to help me make better videos and you enjoy absurdly comfortable T-shirts:) check this out-> www.etsy.com/ca/shop/TheFunnyCarpenter?ref=search_shop_redirect Thanks for watching!

This guy sounds like the Bob Ross of tools very calming

Two things - 1- I never place tools directly on a finished surface just in case of the issue you demonstrated. I have made it a practice to use cardboard, towels, drop cloths, or even instruction sheets under my tools. Since the advent of the belt hook, this practice became necessary. 2 - I plan to buy this tool and 3D print a wing or even just build one! Great video!

Picked one of these up in store today and loved the feel and features of it. Was able to place the attachments on and remove them in store, compared to the Bosch multi head drill I own the process was a lot smoother and felt like it was far better designed. Absolutely loved the offset 1/4 in head. Came back to watch some reviews and just came across your video, I didn't even realise it in store but your point about the electric forward and reverse switch on top is such a disappointing deal breaker for me! Not only for the inconvenience of it, but because an electric push button switch is going to fail far sooner than a mechanical! The base I could have lived with or even modified, the switching not so much. Thanks for the review, appreciate it!

This is a really good review. Covers everything I need to know. Thanks. And subscribed.

Intuitive, industry specific and practical review. Like Niki Lauda improving Ferrari

Great review! Thank you! Honestly many things I hadn't thought of... I'm still going to have to go with this.

I haven't read the comments yet but my solution for the tool falling over was to use a 6 amp battery that has a wider base. Great video. Never mind on my solution. I just saw it tip forward now, lol.

55 years of using drills, hell I used to run screws with a brace &/or Yankee. Got one of these yesterday and 1- at 67 I appreciate a light tool, 2- had no problem running the reverse one handed, 3- great to get back to the D style.

Great video! Helped me decide what to get

I've heard people say that one good reason to use a 12 volt tool is because they don't stand up. if you have a drill bit in a 12-volt tool and you brush it it's going to fall over and possibly ruin something so laying them down maybe a better practice anyways, as long as you don't lay it on the side with the belt hook

Thank you for the informative review! It seems to be begging for a packout case.

The reverse button just right the trigger is a real pain in tha ass for left handed. The button on the top is an improvement for left handed.

I love the push button forward reverse I am left handed and I usually put the drill in reverse. The lock also keeps the drill from running when it is stored

I like your calm voice. I dont know why, but it's soothing :-D Btw, amazing review on the Drill. Thank you for sharing.

For those of you guys watching right now: there is a solution to the stability problem, its called a Stability Stand Bracket for Milwaukee M12 FUEL Installation Drill Driver ...FYI.👍🏻

I've learned too lay the drill down all the time. No matter how stable it is standing up it inevitably gets knocked over at some point. Usually it winds up dropping on the floor. The festool is the premium installation drill, but the battery platform isn't worth the premium price. I usually just carry a couple m12 drills on me with different bits depending on what I'm doing.

My all time affordable gifts for DIY: kzfaq.info/get/bejne/pNp6gdh6mKyolJc.html

Are you kiding me? Deal breaker is it tips over? The first thing ever taught to me about finish work is cover the area your working on so your tools wont hurt things and NEVER - EVER - IN ANY CIRCUMSTANCE, STAND YOUR DRILL UP, it is always laid down, so it will not fall or get knocked over. If I found someone on any of my jobs with thier drill standing up with a bit in it, on open finished floor, counter tops, inside a cabinet, etc, they'd get one chance to learn, or be writen up. I thank you for the tool review ✌️

Thanks for the review. I agree with you. The forward reverse switch is most certainly a deal breaker for me. They keep making these drill/drivers smaller, lighter, and more powerful. All great improvements but the trade off seams the lowest clutch setting is too powerful now for delicate driving. My biggest need is a very low clutch for driving lots of delicate screws. Like a #4 x1/2" piano screw into soft materials. With the clutch in the lowest setting can you pinch it and engage the clutch?

I like the Deal Breaker section....

thanks for the great review

Best drill on the market, I have the festool drill and I always go for the Milwaukee !! I’ve been doing custom cabinets for over 34 years.

When using a drill in my left hand I am always bumping the reverse switch with my thumb knuckle. The top mounted switch looks like a good idea.

I've been in the woodworking business for 40 years. I just had to install four sets of kitchen for a multi-family. I found this drill kitand the Bessie face frame clamps I bought with the drill was the best tool investment I've made in the last 20 years. I've got to watch your video and see what your deal breaker is , I think this is one of the best design tools I've ever used. probably that micro switch won't last 20 years like a lot of the cordless Makita tools I still have that are 25 and even 30 years old. But all in all I'd say it's a fantastic tool if you're doing installs saves a lot of time switching bits of screwing around and getting into a corner has never been so easy 👍

Good review. I just got one. Very happy so far. Yes it is tipsy and the f/r switch location sucks.

I guess I missed this in the review but after a few days of use I finally realized the bare tool AND the right angle both will directly accept a 1/4 hex bit, i.e. you won't need the jacobs or driver chuck when in a tight space.

I love the design.

The direction switch on my drill easily broke and the problem was chronic. It cost Milwaukee a lot of $ to fix/replace those switches. But...I agree the location is not what we’re used to

great review. thanks

I need one of these!

Nice video. Thank you

That’d be the perfect gift for Father’s Day, birthday, or Christmas.

Hard rule against standing drills up.

I agree with both of your criticisms. Both are things I could live with, but both are bad design work. That said, tipping forward with the XC batteries is completely unacceptable, glad I haven’t bought one yet. Love my M12 tools, and this one has great promise, but I think I’ll wait for Gen 2

Glad I watched this before purchase. F/R button on top is 100% no go. Like you said, I'm constantly changing directions and anything different would be so awkward. Moving on from this one, but thanks

Love the flick test.

Any views in fdd vs fpd. Can't see how much use the metal locking collar is in the fdd and fpd has more torque. Are the attachments plastic in both?

Nice review. Came across it just AFTER I’ve ordered my drill 🙄. Anyway I’m thinking I won’t find the ‘deal breaker’ to be that, as I’ve never been able to leave my other M12 drills upright and besides, wouldnt/shouldn’t do it even if I could. They always hang off the (excellent) clip or lay flat. Much safer practice for all tools if I’m working on vulnerable surfaces. I’m more concerned about the forward reverse switch but from other reviews it sounds like if you don’t have an immediate strop and send it back then you soon adapt. Besides this won’t be my main driver, but specialist one for awkward spaces. We shall see. But thanks for the clear concise review and lack of unboxing crap! Subscribed!

Thanks for reviewing this drill. It’s been on my radar for a while now. I’m on my way to KMS now to purchase!!

I lay tools down on the side anyways. This is perfect for me! Awesome!

Thank you! I was leaning in the flexiclick direction, what do you think? Is festool worth it?

I’ve had the forward/reverse on my m12 fuel hammer drill get pushed in accidentally more in 2 months than 6 years on my DeWalt 20v. This direction button is all about ultimate clearance. As far as standing it up, I learned to always set a drill/driver down on its side after doing a summer with an electrician. It’s just asking for material/project or tool damage.

Just to clarify one thing. It has 300 INCH lbs of torque. Which converts to 25 ft-lb of torque.

I actually like the forward and backwards button, I think it’s great and simple, a pretty neat feature. I’ve always lay my drills/power tools sideways or for this too my favorite is it attached with a clip to your pocket or belt. I prefer it with the tiny m12 battery than the bigger heavier battery, in my opinion I think it’s a great tool.

Hey, I can't figure out what "generation" the m12 fuel drill driver and impact driver are currently on now. I'd hate to buy one or a kit and find out the new comes out a month later AND the older one is marked down. Do you know?

Thank you for the one of the best reviews I've seen for this tool! I decided to buy one today and used it up in my attic to drill and install some construction lag screws in a very tight space. Worked great, mostly, I just wish the clearance using the right angle attachment could be less. But for a versatile tool, I'm good with that. I came to comment on the tippyness aspect -- it's no problem for me as I will always lay the drill flat. Look, I'm a clumsy DIYer with a couple cordless ryobi cordless drills that are bottom heavy with their batteries. And while I do like to set down those drills in an upright position for the easy grab, I admit that that on more than one occasion I've managed to knock over the ryobi drill and break the bit (a thin one, say 3/32). My corded drills lay flat, I'm good with flat. oh, and the forward/reverse/lock button, I couldn't figure that out in the store but it's just one button. Works for me just fine -- only thing is you need eyes on it to see the direction as opposed to the traditional tactile thing. Keep up the reviews Funny Carpenter and peace from the US.

Great video! How would you say the power compares to a traditional right angle drill?

The boarding deal breaker for me is the top of tool direction change. I'll have to try it out in store to see if its a big enough deal. 🤔

Great review - the tip-over thing could easily be solved if you could pair the larger footprint battery with a wider front foot that matches the height and could be kinda L-shaped and attach from the side where you're not using the belt hook? If you're handy with a 3D printer that's an easy fix, but the customer shouldn't have to do that. It would be good if something like that was included in the kit as it would be a very cheap attachment if it was properly tooled up.

It's a good review!

Great video....all points taken....i'm only pissed about the xtra steps to forward and reverse...everything else its acceptable for this great tool!

Even when I do finish work, I always lay my tools flat, clip up. Sure I’m increasing my contact with the material, but a tool can’t fall and damage something when it’s already laying down!

I use it for security camera maintenance work on lifts. Works out great without cracking acrylic domes with too much power. Attaching a lanyard strap on the guard part so it doesn’t fall and hurt anyone. The weight balance isn’t stupid for when I need both hands free and let it hang. No place to set it down when I’m 40 feet up in a plastic tub. The bubble button can be reached with the thumb of my hand holding it. If I couldn’t reach it and had to use another hand it would be unbearable.

I have one of these and to be honest his 2 deal breaker gripes are non issues for me, the forward reverse button doesn't cause me any heartburn, the tipping over doesn't both me either because I always lay my drivers down in their side so I don't have to worry about it falling over and damaging the surface or breaking a bit.

Curious, have you used the Bosch 12V tool? Wondering how the Milwaukee compares to it. BTW, the Bosch doesn't stand up at all and, the battery is a pain to remove.

Have you ever had a chance to use Snap On tools with a rocker(?) switch for forward and reverse? In my opinion a lot better than cross bar switch.

Really good review, I’m considering this tool and this has given me a realistic idea of what to expect. In your opinion, is this tool useful for home diy or is it overkill and better suited for professional use?

Glad you said that about holesaws falling out. I thought it was just me!

Thanks man.

Great review! In your opinion, does the CXS have enough torque?

Hi, what happened with the promised comparison video with the Festool CSX?

Hello, i have a doubt, do you know if are this chucks compatible with the fpdx kit hamer drill version??

Gracias por la información. Saludos desde Chile.

How did you find the trigger sensibility and low end torque compared to the beloved festool?

A foot or a stand that attaches to the magnet tray. And that the "foot" attachment itself has the same style magnet tray so you don't loose that "perk"

I’m looking at this for my RC race cars. The negatives will not bother me. Seems like a winner.

Solid Unit!

Nice honest review. I’m torn between the M12 and the Festool CSX. Your preference since you own both?

Can this be used as a die grinder? Thank you.

Sweet drill!

I love the way the fwd/reverse controls are laid out on this tool. I'm constantly nudging the directional push button on my cordless drills with the web of my hand when I least desire to, so this is a welcome improvement as far as I'm concerned. As far as not being "stable" when stood upright, well...I never stand my cordless tools upright on surfaces I care about anyway, so that is definitely not an issue for me.

Btw really like your videos .. I have subscribed

I have the Milwaukee and Festool and the Festool never comes out of the box anymore.. I love the milwaukee and I have no problem with the forward and reverse. I do think the Festool has more power.

Actually looking at this for HVAC installation looks like it would be perfect with all of your drawbacks.

The switch on top is better. I have the M12 Fuel Hammer Drill and Driver. I frequently hit the forward/reverse slide switch with my palm near the base of my index finger. Maybe my hands are just big for the M12 platform, but I think the slide switch should be placed a bit higher. Since it's not, having the button on the top is a good feature.

The forward and reverse was the dealbreaker for me, went with the flexiclick

Only thing missing is the impact driver attachment.

How long is the battery life?

Love that the tool heads are interchangable but hate where they put the forward / reverse button. should have left it where ALL the other drivers have it!!

I generally put my tools down carefully what I working on marble or finish surfaces and I don't trust to leave them standing up anyways it's an accident waiting to happen when someone walks by you turn to hit it with your elbow I mean really , that's your possible deal breaker the way you may put your tools waiting to fall over and damage your clients materials or break your bit, I suggest moving blankets it is always helped me 👍

Got this drill 3 weeks ago, love everything about it BUT ... the forward reverse switch sucks ... its totally not intuitive .. i have the Bosch its great as well but does not fit in the hand like the MW does. Also the Flexiclick has a locking hex holder on the right angle which helps with backing out drill bits as oppose to the magnetic holder on the MW. The forward reverse is a deal breaker for me.

You don’t want to stand any tools up on finished floors or cabinets. You want to have a piece of plywood to lay down and lay your tool on. Or just lay the tool on the pack up bag.

Beauty!

Regarding the last point about tipping, I feel like that's just begging for a 3D printed accessory. It would be pretty easy to design and print something that gives it a wider base without adding much bulk.

I'm sorry I can't afford Fastool I got The milwallee For the price and I have batteries already Let's all your thing about the bits can always put the longer Bit in the Milwaukee If I win the lottery then I'll think about getting the festool You keep up with your videos they're entertaining And knowledgeable See you later from Florida and Cheers With a beer

That big chunk in front of the handle. What is it for? Seems designed to get in the way in confined spaces. Just to hold bits? Better places to put them. Why not try the Bosch? Same attachments, slightly more power, no bit sticking down in front of the handle, and sliding fwd/rev that you like. Doesn't stand up, so it will not fall over. You lay it on its side. (Simples.) If you are working on fine finished surfaces you should be using a tool mat anyway. 'Milwaukee, widen the base'. Why don't you? Better yet, add suction cups.

Yeah forward reverse is the biggest deal breaker for me personally. If it had a regular style switch I'd buy it

genius solution!

I think is just his personal opinion. THE DRILL IS AWESOME! just the way it is.

Does it have an impact drive feature?

Forward and reverse switch is a complete deal breaker! Otherwise it would be a swwet drill. Could have more power too.

I am a DYI person so I may miss something , but I really don’t like those magnetic bits, they always seem of come out of the holder and fall on the floor or get stuck on the screw and pull out of the chuck. So I too really like the drill but I don’t understand why the offset chuck uses the magnetic bits while the normal 1/4” chuck uses the locking style. So you need to have two kinds of bits or use the locking style in the magnetic chuck which does not work well. I also don’t like the stability of the drill and the top mounted reverse. Other then that I too am a fan of this drill.

The Bob Ross of carpentry

The belt clip on it voids the need to set it down if you don't want to damage a surface.

Why are replacing Festool?

Nice review. Yup.. its a deal breaker. Just wanted to buy till i watched this video.

I always lay my tools down on a carpet square or two...where are my tools? - always on the square, can they possibly under any circumstances fall over with sharp bit in them - nope, they're laying down...we all work differently.

Nice review, just using it for a short time, which do you like better, the Milwaukee or the CXS? Thanks

Re. the stability of the drill when it is standing, if you take a 4.0 or a 6.0 battery, then there in no issue. (Milwaukee should'nt sell the drill with 2.0 batteries, luckily it can be bought without batteries, then take a 6.0 Ah)