I got the sawzall in the combo pack and then got the hackzall as a gift and wondered if I’d really use the hackzall. It’s become my primary go to saw for household/DIY stuff. Great tool!

Absolutely love my M12 Fuel version for making cuts in PVC and some light duty demo stuff. I only find myself going for the M18 fuel sawzall for the most demanding cuts anymore. Love the channel Vince!

Love that tool, gotta say that form factor is superior, pushing down from above the blade vs pulling down below the blade.

Had mine for one year and love this saw!

Great unboxing. I gotta pick that up soon along with the M12 Fuel version

That's very cool with the articulating head and everything I have the same exact one that I bought for a very good price summertime when I got that extra Stepside bed for my truck that's what I used that I told you about for cutting that one bed bolt and it went through it like butter

Got fuel hacksaw,fuel grinder,fuel drill, fuelimpact driver, two 5.0 and charger and packout all for $500 at home Depot

Thanks again Vince! Love your reviews and makes my decisions so much easier when it comes to tools! Funny, entertaining and educating.... by far the BEST out there! Have a great week and can’t wait for the DYNAMIC DUO this weekend!

I’ve got one and love it. It feels like it works better than my corded DeWalt reciprocating saw.

Absolutely love mine mine came with a battery as well trying to remember what I paid for it was last summer it was a great deal I couldn't pass it up

I've had my M18 fuel hackzall for about 2 years now and I absolutely love it. I just got my M12 fuel hackzall a couple months ago. I've only used the M12 once so far but as work starts picking back up in Spring I'm sure it will give me the opportunity to use the m12 more. I do wish the M12 had an articulating shoe like the M18. I guess I'll figure out which one I like more as I have the opportunity to use m12 a few more times. Another thing that I have noticed about the M12 is that it does not have a drain hole on it like the M18 does. This drain hole could come in very handy when using it for cutting pipes that still have water. That being said anytime I'm reaching for one of the two to cut a pipe with water in it it's definitely going to be the M18. Most people don't even know about that feature of the M18 hackzall and therefore they do not realize that the M12 hackzall is missing that feature

Hello everyone, I have the Milwaukee 12V fuel version. It is a money maker, and I have been using it for a couple of years. As a side note. It cuts up a pork loin really really nicely !!!!!

As a service plumber man this tool is the way to go ! Best invest I’ve made !

For gardening, that's my go to!! Stick a Diablo pruning blade on, good to go!!

Yess!!! You guys got the m18 FUEL hackzall! Thats my right hand at work everryyy dayyyy!!!

Yep, ya kinda waited too long to pick up this gem of a little tool. I purchased the kit when it first came out, and thanks to a pricing snafu at the Depot I paid $199 (better deals have popped up, but typically you pay $249 and up). Awesome tool, way better than the brushed model. I have all the M12 and M18 Hacksaws, of course the Fuel iterations are far superior than the brushed models. Great tutorial as always Vinsanity!

Like the unboxing videos & love the glasses 👓

I have the M12 version, love it!!

Saludoss desde peru mister vince. Lo maximo en herramientass💯👏👏

Vince, I feel DeWalt should had made this exact size and stroke hackzall for their regular 20v tool line. The atomic model is a little under power and lack of speed. Maybe they will make a another model for the regular 20v line. The DeWalt atomic tool line does have a few hits and misses. I have the milwaukee m18 fuel hackzall and i do like a lot. I use a diablo blade and the new 8.0ah battery and it's awesome. Just remember everyone the hackzall is not going to do a whole heavy demo job. Just use the right tool for the job. Enjoy the new tool and can't wait to see the TTR.

You are a top notch creator. Thanks for the clean channel.

I will forever be in your debt if you can talk Milwaukee into making an M18 Bench Grinder that mounts to the Packout System.. Or possibly have an riser attachment to mount to your hitch... It would be so so so so awesome lol

Only complaint I have... after using the bosch version, I really don't like that the battery loads in from the back of the handle. It's a bit awkward loading into the back vs the front, but the worst part is that it's forward heavy and doesn't like to stand up... at least with the 5ah battery. If they had only made it so that the battery loaded in from the front, it would stand up fine. Thats something I've really come to appreciate with the bosch, especially when I'm on an a frame ladder.

I love this tool.

I've had that one for a good while now and it's great. I use it for all my Sawzall cutting unless I'm doing demo. Then I get out the big M18 Fuel Sawzall.

I got this and the Sawzall. Took back the Sawzall because for my needs the Hackzall did all I wanted and it was so much lighter.

Love that hacksaw cuts castiron like butter

Also the Milwaukee rip saw Anna Milwaukee Sawzall both have 3000 Strokes per minute which is pretty good for a small Sawzall but does get hotter faster than the bigger one

Bought the fuel hackzall 2 days ago. I do HVAC I've yet to use it but I'm excited when I do

I love mine been using it for years

the ergonomics, the ability, the versatility.....the engineers got this one right. I look at my saw all and wonder why I ever used that thing.

I was able to get a great deal on a Fuel Hackzall on Black Friday. That sucker is far more powerful, and heavier, than I had anticipated, but it is still easy enough to use with just one hand. I love using it.

Another great video and demonstration . Keep up the good job!👍🧰👍

Hey has there been a TTR with any routers? I looked through old videos and didn’t see it. I might of over looked it. But I think a updated review of routers would be super helpful. Thank VCG!

I used my m12 to cut my thermostat housing rookie mechanics since I don't have baby hands it did the trick

Thx I want one now

I have a 12 volt hacksaw. It is really reduces the vibration big time.

How about the Skil powercore 12v recip saw ....id like to see yo review that.

I'd like to see some band saw comparisons in the future like the m18 brushed the dewalt and bosch heck even Makita. Maybe cutting some unistraut,coper, and straut?

Should I get the m12fuel or m18fuel?

What is the difference of that 1 over the longer 1

Just got my M18 today can't wait to go cut some shyt up from pvc to cast-iron stacks Milwaukee all day son

Can the Hackzall cut ABS ??

Yes I own that tool, and the M12, also the Dewalt....why? Because assistants forget to bring their tools 😑, or they’ve caught on that I roll with enough tools for three.🤔(eh whatever.) yes too long for you to finally pick that bad boy up, I think it was in Nov’2019 HomeDe had a buy two bare tools get a pair of M18 HO3.0Ah batts free, came to $308 after taxes (M18 Hack & M18 Surge, two HO 3’s) I felt good about it.... being that the HO3.0Ah are High Output, do they still get the power/performance bump? Or is that reserved for the 6 and up? Btw never get the six jump straight to the 8 same physical attributes... but I’m sure you know that already.

i throw a long pruning blade on my hackzall so i can have one hand on a ladder and cut a limb with the hackzall. also use it instead of breaking out the chainsaw when cutting small trees at ground level.

I got one and love it to bits. I wish the shoe was adjustable in length like the Sawzall, but besides that I wouldn't change anything about it. And yes Vince, you definitely should have grabbed this one sooner! 🤣👍

Love yalls channel thank you for the great info

Just ordered this. I don't have a specific need, but the current deals I could not pass up.

Great for plumbing

Also do you see how much better this one is with the flexible head than the non flexible head from Milwaukee but I do love mine like I said the only thing is the LED light does not help but the more you use it he will see how fast that rubber starts to tear right below the light

7:41 best part of this video

Yo dude it would be cool for ttr if you can do a Makita cordless pin/brad nailer

Try the red diablo wood metal pvc blade. Cuts pvc like nothing

Let’s not forget, the guy that’s starving and wants a sandwich, is doing you a favor by taking the time and creating FREE content for you to watch. I think he’s earned his sandwich🥪 !!!!

@VCG No bag have one lol but all kidding aside the only problem that I have with mine Milwaukee M18 brushless fuel is the rubber piece right below the LED light starts to rip first and then starts to rip and then depending how aggressive you use the Sawzall the rest of the rubber starts to rip more and more

Just picked this up from Home Depot today. Same model number as on your box. No blades included 😡. Calling Milwaukee on Monday to see if it should have been in the box or if Milwaukee no longer includes them.

Yo Vince, how about a M12 fuel and a M18 fuel hackzall comparison? 🤙🏻

I use mine as a back massage wand. Remove blade, go to town.

Para3 is my edc rotation.

First video from this guy, am I the only one getting Adam Sandler vibes from this dude, more specifically Billy Madison. With that being said decent unboxing video.

I have 7 to 8 Long Stroke😁

Like smashed bro

It has the Same stroke rate I got

Milwaukee super

I bet those Roy Orbison Glasses cost you a fortune in auction. I use the hackzall to cut bread, with the HO batteries you can even cut brown bread.

what is the special feature?????

Why didn't they go with the one inch stroke? The Kobalt Nick burned up was one inch stroke

This thing is the balls.. should cut a few different things not just PVC

i have the M12 fuel hackzall...it gets the job done for me....i think the M18 fuel hackzall is a little too big for one handed operation and i have big hands #justsayin

Just picked up one of the last of the special deals on Home depot. Com M18 Fuel & 5ah battery for 159$

I would like to see please m12 fuel Hackzall. VS m18 fuel Hackzall

Interrupts the review to review the knife he opens the package with 🤣 I bought one of these with the impact, hammer driver, multi tool (all FUEL), a 3.0 high output, a 6.0 high output, a 5.0, charger, bag and flash light for $600 from home Depot.

Just bought my m18 fuel and impact & hacksaw combo w a battery & a charger for 270$ who found it cheaper ???

Nice tool, but the life span appears to be about a year with heavy use.

He steals catalytic converters an night;)

Who sells the knife?

Did I miss the special feature inside?

I hit the like button, because I am not a mean person

;)

Ta do dat

It’s funny, the new packaging for this tool doesn’t include the blade in the picture anymore nor is it included in the box 😂🤦🏽‍♂️

How .Much It's .Cost Please SayIts. Rate Date. \20 \06 \2021

Wht a character

You got a sandwich from me bro. 😄👍

Do not Cheat Askers Mind

Special feature? 🤦🏻‍♂️

I gotta stop binge watching your videos

Somebody get that man a sandwich! Do not let that man go without a sandwich!

Jesus saves