I used the corded hole hawg while drilling large holes while working as a plumbing apprentice, saved my wrists and fingers from serious damage during kickbacks. almost broke a finger and wrist in my first month using a regular drill to make holes in 2 studs. The clutch control on these drills saves the most important assets to us tradespeople, our hands. Well worth the investment for sure!

Something very satisfying about plowing holes quickly and cleanly 👍👍

I’d rather have a packout box instead of a bag, even if I have to pay a little more.

That is any insane tool. Super cool !!!!! The technology in the 30 years I have been on the job has changed so much. The new kids in there 20's coming in to the trades have excellent charges to pick from. My Milwaukee corded are older USA made tools, dinosaurs by today's tools,. But still pack a real punch. Thanks Vince, nice job !!!!

I've used it, and even just the m18 Hole Hawg is amazing. If I plummed full time, I'd consider switching platforms just to have that tool- as my tools kick the bucket of course. Cool video guys!!

Those are an awsome drills we have a couple in each of the vans it’s great we can drill almost all day roughing houses putting. Conduit in they have enough power

Damn I just started getting a new channel a few days ago. Did a security camera job last night and this is exactly what I needed. Move the washer and I needed to go in the wall straight down and nothing I knew at the time could do it. Thank you for this video and I am now subscribed with the bell

Hope you are all having a good night! Another good video presentation!

I literally love this tool, use it daily for rough in plumbing, its awesome!

V.C.G. using tools to make "Man-Glitter-Chips"..! 💪

That look amazing good tool and power thank's Vince for the content keep it up

I use my super hawg for drilling 8 inch ice holes when ice fishing in northern British Columbia. Love this tool, I also use it for the intended purpose of drilling into dimensional lumber to rough in plumbing. Love you tool videos buddy.

Yes do the 100 hole test

Just got one and it is one of the most satisfying tools to use... everything is butter to that bad boy

I was just gifted one of these after burning up two drills on a site. Drilling through 3 2x4 ceiling plates (190) per floor on a 6 story apartment build. Excited to see its damage output!

Hey Vince, there's a video made by Milwaukee for the interduction of this drill showing a clutch operation in low gear with a large self feed bit stopping this tool when it jams.

I don’t have one, don’t need one but I’m getting one. Milwaukee should thank you and maybe send you a $10 holler.

Wow! Nice it’s quick great unboxing.

Great presentation Vince. I got mine as a bare tool and use it with a 12.0. I also got the keyed chuck because there's times I use bits that are not a 7/16 hex. I love it and can't wait to see a TTR with this thing

Thanks for doing the review Vince.

I still have in old Milwaukee Sawzall with the metal box that came from my grandpa. I also have that came from my grandpa a Milwaukee sheetrock gun it also has a metal box

That is amazing. Sound like a replay but it’s true. I need one of those babies bad!!!

I love my Super Hawg, makes plumbing so much easier compared to just the regular hole hawg. That quik lock makes switching bits easy. Easily my best investment in Milwaukee to date.

We get the 2-3/8 and 2-9/16 Switchblades by the case because we go through lots of em drilling through 7-1/2” to 7-3/4” creosote soaked oak crossing planks

This drill does have a clutch but only in the low gear setting.I picked up this drill day one of release

I like the bags they make a good suitcase for a couple nights stay

Wooooooooo-EEE! Thanks for mentioning our hero Chef Justin Wilson!

I’m a lineman always wondered how this would hold up drilling pole holes or if I stick with the impact

what a beast,,,as a diy have no need for one but,,,,,,,

What a beast the super hawg is dang

8.0 HD battery really is the sweet spot for this drill.

Love my regular sized M18 Hole Hawg with Big Hawg bits. Focusing all that speed and torque on those 3 small carbide teeth is a winning combo imo instead of spinning heavy selfeed bits to make shavings. First thing to come off is the handle. Unnecessary.

just to clear one thing up; It DOES have a clutch BUT ONLY in the slower gear not in the higher. It's actually the sole reason I'm buying it.

You need to do comparison between the Milwaukee and the DeWalt that would be a freaking awesome tool test Raw take care cheers with a beer

Vince trying to blow out them big ol wood chips 🤣. I know it's an old video , but it's still gold.

What beastly combo!!!!!!!!

Great video

I recommend themilwaukee big hawg bits. They rip right through and don't make as much of a mess as the switchblade

Seeing 100 holes drilled to confirm Milwaukee claim would be an interesting video

That Quik Lok looks like an improvement over their regular collets. Wonder if it's possible to have Quik Lok in 1/4 ? Although it looks like the bit cut outs are different on Quik Lok.

Thanks!!

Could u do a head 2 head vs the Makita 36V variant?

Looks awesome and I bet it will work great for years in a studio environment. My plumber buddy has the first gen super hawg with the quick look and he has nothing but problems with it getting jammed and not releasing bits or not getting to the reset position to insert a new bit. I've seen him throw it across the room on multiple occasions out of frustration! I have the classic Jacobs Chuck version and it works like a charm.ill get the gen 2 but stick with the Jacobs Chuck.

TTR against the ridgid megamax with the right angle head!

Thanks bros!

Them holes are super clean

Coffee cup holder maker lol

I like the hard case not digging the bag thing

12.0 is the perfect size for the supersawzall

How does the ship auger attach to the quick connect

I’m think the screw in handle is for mixing grout, plaster, etc.

Great video vince

I will say this, This beast has the power to run a 6" Post hole awger bit, to 4ft deep, on low rpm, for post Holes no problem, using 12 AH battery !

We have one of these for each truck, they are a beast. Bad thing is my coworkers use the batteries up and don’t bother to charge them, then come steal my personal batteries next time they want to use it. 😡😡 nothing can compare to the super hawg, but it sure does get heavy quick when you have to use it above head.

Nice 👍

I love hard cases Vince

Honestly I have several t- handle 18v drills that I have drilled these size holes and even larger using the same style bits, while I agree it is impressive, even my 17 year old R8411503 could do these holes back then with its original nicd batteries, (Which admittedly had me most impressed back then also) and still can even better now with larger capacity lithium ones. (Although this can get in between studs easier to say the least.) I was hoping to see a real test like with a 8" or 12" ground auger.

Can you change the quick lok chuck to the drill chuck are they interchangeable or do you have to buy the super hawg with one or the other

Is normal so the super hang stop in holes whit 2 9/16 bit in high speed? The tool and battery is brand new

That thing is 20" long, with a 12" long secondary handle. Those two long ass lever arms to counteract the tq. That thing must have a TON of tq.

I want you guys to get a bunch of logs and drill holes right through the cores with this thing. Please.

If I switch the right angle head to high/750 , do I need to replace / swap something ?.? Just by reversing it doesn't mount .. thanks Bob

How do you connect the hole hawg to an 8” earth auger bit to dig fence posts? The connection is like a cotter pin. Is there a way?

I like the bags, cause they are universal. The boxes are molded for whatever tool that came with it. I especially prefer the bags now that my tools stay in packout boxes.

Can you try one of these drilling METAL please

For anyone who works where there is no power, it takes 3 hrs on those batteries to charge

In all seriousness you guys have to do a ttr with that and the ridgid megamax right angle it would be epic!!

Hi Vince , does it have a clutch if it jets jammed ??

Could you use it to core holes theough brick?

the larger battery provides more juice and force...

What is the difference between the m18 hole hawg and the m18 super hawg? Is one more powerful than the other?

Wonder how that Super would hold up against some ice boring, whatcha say there Vince? Ya ought to come try it out this winter LOL

If your hole saws or arbors get damaged, Milwaukee will replace them. Had my small arbor and 1 1/8th not want to come apart and they are sending both new. This is what sets Milwaukee apart from the competition.

Vince have u ever tested the makita right angle or ever compared the makita Milwaukee dewalt

MAN GLITTER!?!?!? Vinnie, you been watching AvE?

Can you slap on a metal hole saw and try different gauge metals?

Wish this was available in Australia

My electric supply place has this one on sale for 250.00 with battery, charger and bag. I’m thinking of buying it.

Still waiting on a 1/2" impact TTR!

have a competition with it against the Makita 32v and the dewalt

Does it have a clutch

Will this handle a 61/2 hole saw

Could this work for coring 4 inch hole in concrete? I know core drills are better, but I only need to drill a few so I would get more future use out of this if it could get the job done

yes test the batteries

I believe there is an e clutch on low (only).

Put it against the dewalt flex volt right angle drill

Milwaukee needs to make a stubby quick change adapter instead of just longer extensions. That way we can have the full quick change ability on our corded drills and can use all of the quick change bits in tighter spots without having to periodically use the keyed chuck.

I will say this. The Very Cool “I will say this” Gang says “I will say this” a lot and if you like the Very Cool “I will say this” Gang saying “I will say this” then smash that like button for more “I will say this”.

let’s see the Metabo 12v vs the Milwaukee 12v

VINCE. JUSTIN WILSON. MY HEART. Dear god the man was amazing, reality tv? Give me a break, that man turned cooking shows into a vacation and a comedy routine all at once. I had the pleasure to meet him a couple times as a kid. here in New Orleans we’d cross paths with our celebrated chef’s fairly often, otherwise why celebrate them. But Justin Wilson was so fascinating. You learned as much history/socially/etc. and got a few language lessons in every episode and next thing you know he’s like “and if you like cooked meals, I’ve got one waiting right here just so you don’t have to wait, so smash the like button. 😂” You know he’d be on KZfaq if he was around. If you have a business address you don’t mind sharing and want some famous Cafe Du Monde beignet mix or anything from here in New Orleans for you or the missus, say the word. I can’t even express what thinking of Justin and seeing his face just did to me...I lost my mom in April and I was her caretaker through my entire adult life practically, so despite a decade of Parkinson’s I wasn’t at all prepared. I’ve been lucky enough to not know grieving like this before, but I just had a purely happy memory no grief because I’m not used to her being “past tense” only, just joy and of watching Louisiana Cookin’ or Cajun Cookin with my parents (it was as much comedy as cooking). If you made it this far, thanks literally set the tone for my evening by just seeing that photo and ...just wow and thanks, Wild how a random tiny thing can impact someone massively. For anyone unfamiliar with the legend himself: kzfaq.info/get/bejne/m7FkqNCDsrDQoqc.html

I thought the difference between the Hole Hawg and the Super Hawg WAS the clutch. The cordless Hole Hawg is no slouch either, and much smaller form factor (similar to a corded Hole Hawg) but definitely a wrist breaker to the uninitiated.

BAD ASS !!

Lmfao pop these in the oven I mean the chargers lol

Any power tool tips for weeds in a place like New Orleans where it’s always summer ? I bought a flamethrower but it wasn’t the right kind, I need napalm apparently or a “drop torch” style that drops fuel onto the vegetation. Trying to Kill weeds that give me the middle finger by sprouting through brick is going to be the end of me. Nothing works well on Jumanji Jungle weeds.

I am the Milwaukee super hawg beast/ master. What’s up plumber?

I have the hole hawg not the super it’s a good tool I don’t use it often. I personally think the quick lock is a rip off , a regular chuck allows you to use almost any bit you want in the tool , the quick lock limits the bits you can use in your tool.

Yay

Why do we have adjustable chucks anymore? Most drill bits are 1/4 drive, SDS style, or this thing now. Feels like we keep them around just for the old guys with antique drill bits now

I know what I want for my birthday

I want everything millwaukee has I have an addiction for tools bad and what’s really bad is I’m 15 and my addiction has started early. Millwaukee should just sponser me and give me evey tool they have😂😂