My go back to battery vacuum for clearing drain lines stopped working. This is my second failed Milwaukee vacuum in the past 6 months that stopped working for no reason. #milwaukeetools #milwaukeem18 #vacuum #drain
Пікірлер: 98
@jonathanweeks99565 ай бұрын
Great video! Followed your instructions step-by-step and now my vacuum is working again. Thank you so much!
@PotentialDifference114 күн бұрын
Thank you for this tutorial! I opened mine up and saw the red wire at the solder point on the board was disconnected from burning up, right at the solder😂. I just cut that extra red wire coming from the switch and reused because I didn't have any spare connecters. Works like a charm! 🙏
@coltonkruse23137 ай бұрын
Man nice video! Super thorough and clear troubleshooting. Going to save this video for when I have time to take my vacuum apart. Thanks
@timothytran604 Жыл бұрын
Thank you so much!!!!
@nicho438126 күн бұрын
Exactly what I needed, much appreciated 👍
@jessemejia60182 жыл бұрын
Great video,thanks.
@hvacmadeeasy17882 жыл бұрын
Glad you enjoyed it
@peterclark1069 Жыл бұрын
Awesome! Thank you
@Ubermeisteryyy Жыл бұрын
Not awesome. Unless you want to set fire to your house/garage
@ViniloMc8 ай бұрын
Very helpful. Thank you
@hvacmadeeasy17887 ай бұрын
Glad it was helpful!
@patrick2422 Жыл бұрын
Mine broke other day going to try this in the morning cheers mate 🙌🏻👍
@hvacmadeeasy1788 Жыл бұрын
Awesome, hope it work out for you.
@stephenfiore9960 Жыл бұрын
…What a F’ng mess….Thanks a lot Milwaukee!!!!
@Ubermeisteryyy Жыл бұрын
And thank this guy, when you follow his "fix" and burn your house down
@gheka3510 ай бұрын
@@Ubermeisteryyyyou won’t burn your house down, but you will damage your battery as it doesn’t have a low voltage protection anymore. You could remove the Milwaukee board and add a simple voltage drop board
@kennethringwood94747 ай бұрын
Super Thank You!
@shanesstuff13214 ай бұрын
great video mate thanks from Brisbane Australia
@hvacmadeeasy17884 ай бұрын
You’re welcome
@finderskeepers9106 Жыл бұрын
Fixed mine… going to run it like this for a while till i can get a new one.
@courtneymaroney764 Жыл бұрын
Thank you buddy probably could have done it with the video but I like to watch haha
@joselopez633 Жыл бұрын
I now have 2 of the same vacuum not working. This made one of them work. Thanks!
@darrelqify Жыл бұрын
Thorough! Thanks man!
@joeb2480 Жыл бұрын
Great vac, mine started making loud noises and couldn't find anything wrong. Found your video but decided to not take mine apart since it was 3.5 yrs old and still under warranty. Submitted claim at the Milwaukee eservice site along with my proof of purchase (email from Home Depot I had ordered online). No problem. They even provide shipping label and they PAY FOR SHIPPING BOTH WAYS. Good news is they sent me back a brand new vac in the box with all accys etc. It was delivered to me fedex within 2 weeks of sending the old one. Sweet, they stand by their tools. KEEP YOUR RECEIPTS. BTW sent in my 8.0 Ah battery over the summer as it wouldn't charge correctly, only to 2 bars. They replaced that no questions asked too. Last, my vac was never used to suck anything wet so not sure why the motor went.
@hvacmadeeasy1788 Жыл бұрын
Thanks, Good to know.
@paulsinghish Жыл бұрын
Hey brother do you know the motor part number or link to purchase one?
@ivanbush8428 Жыл бұрын
thanks man mine has the same issue and works just fine with the bypass, i just made a spade bypass so I didn't have to cut the factory wiring , seems that card is almost a planned failure feature by Milwawkee tools since mine is only a year old.
@desertclimber784 ай бұрын
Thanks man!
@hvacmadeeasy17883 ай бұрын
No problem!
@frankb8616 Жыл бұрын
I’ve gone through 4 of these in less than one year. It must be by design to get you to buy another. Basically a throwaway one use vacuum.
@hvacmadeeasy1788 Жыл бұрын
Yes and to add to that, the hose was placed in the most difficult area to transition from pull to push. Hope the video helped.
@ade222 Жыл бұрын
Thank you for posting, very helpful !
@hvacmadeeasy1788 Жыл бұрын
My pleasure
@bobbycraig79403 ай бұрын
Thank you
@hvacmadeeasy17883 ай бұрын
You're welcome
@ProfFrank5000 Жыл бұрын
I used this to fix my vac. Thanks dude!
@TomKirkman12 ай бұрын
I've had three go out. One went out on the second time I used it.
@jimenez3053 Жыл бұрын
Good job sir. Thank u
@hvacmadeeasy1788 Жыл бұрын
Did it work for you?
@Ubermeisteryyy Жыл бұрын
This is a "good job" if you like the tasty fire of lithium batteries..
@mikepappas9195 Жыл бұрын
Great video! Thanks, I will try this. Would you recommend putting an in-line fuse in the negative lead going from th switch to the motor ? I have m12 vac with same problem, uses 6 Amp battery. Not sure what amperage fuse to use. Thanks for any advice you can spare.
@hvacmadeeasy1788 Жыл бұрын
Generally Fuses should be at least 25% larger than the maximum continuous current you plan to draw. Not sure of the running amp of the motor but good idea.
@wowchad9 ай бұрын
This my fav vac, but watch your filter gasket b/c it’s not glued in so it’s prone to falling out which allows junk past filter & into motor which quickly trashes it! Mine works intermittently & I think it’s the overload protection circuit. Fingers crossed it isn’t over 5 yrs old so Milw. will fix it for free under warranty.
@hvacmadeeasy17889 ай бұрын
I love this vacuum except for when I need to remove the hose, it can be very difficult.
@Dan.Parker6 ай бұрын
What is the purpose of the circuit board if you can just bypass it
@kcretni3 ай бұрын
The circuit board is some kind of motor protection.(I think) You can temporarty jumped but not permanently jumped.
@finderskeepers9106 Жыл бұрын
Instead of splicing in the negative bypass you can just connect it straight to the switch by expanding and crimping it down to the switch so you can undo it and not void the warranty.
@hvacmadeeasy1788 Жыл бұрын
Had it for a while, don’t care about the warranty at this point.
@Ubermeisteryyy Жыл бұрын
Warranty? If you opened the machine up, the warranty is void anyway, Einstein 😂
@NycCitizen27 күн бұрын
What’s the fix for the board….is there a fuse or something? What does the board do? Do we need a circuit breaker now?
@gabesreef2 жыл бұрын
That was easy. Hope this helps some people
@hvacmadeeasy17882 жыл бұрын
Hope it does
@Ubermeisteryyy Жыл бұрын
I hope people don't burn their houses an äd garages down because of this clown.
@felipealejandrocruzrojas9947 Жыл бұрын
Es sierto la mia estaba higual gracias
@Ubermeisteryyy Жыл бұрын
Prata svenska?
@30cal.outdoors88 Жыл бұрын
Hi I'm now in need of doing this thx for your video. Question though I'm not electrician. Will this work if I'm using the HD 12 battery or will it burn out something. My brain keeps wondering what the circuit board is for. Is it to regulate power from larger batteries . Thx
@hvacmadeeasy1788 Жыл бұрын
Is HD 12 battery meaning 12ah? If so it will make the unit run longer than a 6ah battery but it should be fine as long as it a M18 battery. Either way I think this vacuum is obsolete but you should try to use the warranty if they will acknowledge it. This video is really a last resort.
@nickfriedrichs7198 Жыл бұрын
Same crap with mine. You can see on the board where it blew up. Is it ok to run without board or will it mess up batteries or blow the motor??
@hvacmadeeasy1788 Жыл бұрын
Mine runs fine
@br5339 Жыл бұрын
Great troubleshooting! I believe the circuit board is what helps ensure you don’t discharge the battery to far and ruin it, no? If so, are you just making sure you don’t run the batter past 1 bar on the power meter or something?
@Ubermeisteryyy Жыл бұрын
This is NOT "great troubleshooting" It's the easiest way to solve things: bypass everything. I wouldn't do this, it's a fire hazard. The moror runs now, but it isn't fixed, just hacked, in a bad way.
@user-mn4fp8zj2d6 ай бұрын
Quick fix while in a pinch. It drains your batteries power very fast !!
@acebeen2raw541 Жыл бұрын
could i possibly cut the unused wire &’ use it instead of a jumper?
@hvacmadeeasy1788 Жыл бұрын
You could and cap the other end if you don’t have additional wires.
@tvm2209 Жыл бұрын
Bought same vacuum 2 weeks ago and used 2 times maybe 5 minutes each lightly. 3rd time I tried to use it and the vac refuses to turn on lol smh.
@hvacmadeeasy1788 Жыл бұрын
Yes it’s crazy that this made it passed their QC.
@tvm2209 Жыл бұрын
Update: I literally just tried again after almost a year of it just sitting in my garage and it works flawlessly 😂
@salg7998Ай бұрын
Funny you used Dewalt tools to repair s milwaukee tool. Good video
@mmbodnar Жыл бұрын
is there a surface mount fuse on the control board?
@hvacmadeeasy1788 Жыл бұрын
I did not see a fuse but you could always add one.
@Ubermeisteryyy Жыл бұрын
Well, you didn't look for a fuse either. How the f can you advise people to burn their houses down?
@crappysoup Жыл бұрын
encountered this same problem. do you think it's some inherent issue with this vacuum? thanks for your expertise
@jaysmallz1110 Жыл бұрын
I have 2 of these vacuums (manufacturered around 2020) and both have this same problem
@crappysoup Жыл бұрын
@@jaysmallz1110 Seems like it's the model.. Have you sent any of them into Milwaukee?
@hvacmadeeasy1788 Жыл бұрын
Yes it seem like a manufacturer defect.
@hvacmadeeasy1788 Жыл бұрын
No I didn’t but I have a few techs with the same issue.
@joeshepherd4412 Жыл бұрын
Had one of these when first came out lasted couple years then since that I've been through 4 of them breaking within 6 months or less seen quite few plumbers having same issue so definitely a problem with design
@nickfriedrichs7198 Жыл бұрын
K I’ll do it run with it thanks
@thisguy78529 ай бұрын
Did this turn out to be a long term fix??
@hvacmadeeasy17889 ай бұрын
It’s still running and I use it daily.
@mfl9879 Жыл бұрын
My problem was a cold battery
@hvacmadeeasy1788 Жыл бұрын
Thanks for sharing.
@Ubermeisteryyy Жыл бұрын
I thought I would get a suggestion to a "true" fix. This mod would likely kill your batteries, and you have zero protection against short circuits. Fire hazard likely. I won't do this to my machine. Do this at your own risk guys!!
@hvacmadeeasy1788 Жыл бұрын
There is no true fix since this model is discontinued. Just add a in line fuse if you’re concerned or just upgrade to the newer models. Thanks for watching.
@SilliestSmurfEver10 ай бұрын
Someone who can do electronics can do a true fix or at least a much safer one.
@musiklyfe76832 ай бұрын
They do sell replacement chips for this device now. I may consider trying that route. 🤷
@matthewstringer4424 Жыл бұрын
The motor is locked up on mine.
@hvacmadeeasy1788 Жыл бұрын
That’s unfortunate but replaceable.
@matthewstringer4424 Жыл бұрын
Discontinued
@sracoma87 Жыл бұрын
You a hvac tech???
@hvacmadeeasy1788 Жыл бұрын
Yes I am
@Ubermeisteryyy Жыл бұрын
If he is, i wouldn't use his services. This hack is potentially lethal. Lithium fire is not a pleasant thing.
@davidstfleur44516 ай бұрын
I will hack my vacuum. Thanks mate
@IsaCb-lo7wl9 ай бұрын
Love the lesson but it’s $99 just exchange it !!
@richardpowell24167 ай бұрын
Mine goes out every 3 months and I'm too busy to keep sending them in to milwaukee. They even pay for the shipping when I get them warrantied. I just don't have time or patience for my vacuum always being down.
@doughoist6 ай бұрын
I think this is known issue to Milwaukee but it costs them very little to manage as the trouble it causes the customer to have it fixed causes very little actual warranty work for them.@@richardpowell2416