Awesome job! Really appreciate all the information.. I have worked for a Power Company for 40 years and love the organization you have done.

Thanks for doing the review - really liked the tip on using carabiners to organize the wrenches! Definitely gonna do that too.

I love these packout systems so much that I bought two of the three box kits plus a few of extras and the 15” totes. Outstanding tool boxes.

Totally agree with your statement about keeping tools clean if you can help it. Don't understand why some guys treat their tools like garbage.

Thanks for taking the time to make this video. The telecom company that I work for recently bought a packout set like yours and it's nice to see how to fill it up!

Good video. Always like seeing other low volt techs gear! I own the PackOut system as well. Very well made and thought out.

Love the tool collections. Really shows the years of knowledge and hard work to build out something like that.

The circle maker is used to actually cut holes in drywall. You first cut through the paper on one side, then do the same on the other side of the drywall. Then hit the finish side of the drywall with a hammer or even your fist, and suddenly you have a nice hole in drywall! I'd imagine it would also work for drop ceiling tiles, but I've never tried it.

I'm just getting started in HVAC and I got the wheeled tool chest and the 3 drawer tool box before I even knew what to expect. Now I have a Toughbuilt tool tote which works pretty well, but I'll eventually replace it with a Veto. The Milwaukee ones I mentioned rarely leave my vehicle now and I only use them to store extra batteries, power tools and large/extra/infrequently used hand tools. They're great for storage, but not-so-great for my trade (on the job site) haha.

Thank for the vid..been considering that Milwaukee set..i currently use husky.

I take good care of my tools also...i have the Packout also... it doesn't get as much action as my Rigid pro box which goes out daily but still mostly stays in my truck I use the 12v. Milwaukee for trim also....great set up!

Thanks again for your time making this video i have the packout and just don’t know how to organize it but u have helped

Wow you said "just my opinion and the way I do things"... and it stuck in my head throughout the video! Very relaxed and organized video!!.. I watch these types of videos for the same reason you mentioned. To learn off others and adapt methods to my needs. 👍🏼

amazing we have almost identical tool setups...great job liked the video

Great video, thanks for the tips, and you got good taste in tools. Gonna get me a packout

Just got the sds 1 1/8 "rotary hammer drill ...what a BEAST!!!

After a year out in the field, how is the Packout stuff holding up...? Follow up video..???

I enjoyed this video. I am on the edge but will probably go with Packout. Thanks

I like how organized you are with your tools and how well you take care of them , I'm same . Like you said they cost money and make you money so why not take care of them.

Thanks for the tip of the tip using the clip for the box end wrenches. I’m modifying mine know.

Nice set up! I would recommend a cool set of straps for all of your Auger bits. I don't like anything rattling or making noise in my tool box it would also prevent from getting damage. Keep it up....

Great vid don’t mind negativity from certain types of people. The rest of us appreciate your time and effort I Learned a few things. I get mine in a few days

Great tour! Please let me know how the Pack Aid works out on the XXL-F, i like it allot, but need it to be compatable.

Badass step up and tools bro!!!👍

Subbed and liked! Great vid good to see all ya gear so well looked after

If im not mistaken i saw your unit crest. Thanks for ur service

Thanks for the info. I share your ideology: share ideas. You've done a few things I hadn't considered, and now you've got me re-thinking a couple things :)

Great vid and organization!

Nice video brother. I appreciate you taking the time to put this together.

Do you know or does anybody know why in the medium toolbox is there a slots in the front left in the front right corners like the hang something or hook something?

I have a lot of the same stuff but all in different bags. The packout system sure looks nice!

My journeymen wouldn't allow me to have those wire nut spinners UNTIL calluses bled from doing it by hand. 😮‍💨

wow alot of those stuff i have but i dont keep in a tool box... lolol....i just organized 200 item 5 gallon bucket of screws and nuts. i feel like a cheap canvas bag for your drill bits. on the middle tray

Great Video Scott. Nice to see more a/v techs set ups. Veto Pro Pac all the way. I carry the XL and love it. Nice setup with the Packout system. Love that you take care of your tools.

I agree some times I beat on my tools but I always try not to

The PackOut is a beasts, but if going to fit this in a car boot the height of the handle when lowered is 26” or 650mm but if it’s the bed of your truck it’s ok.

Scott, just found your channel and was watching. I am kind of confused by this video, you’re saying that you don’t take your packout on ruff-ins, but the only things that packout excels at soft tool bag storage (which you’re not using with your Vito), durability (which you don’t need if you’re not bringing it out on ruff-ins) and being the most expensive stackable tool solution. Storage; does pack out have a shop storage solution or a van storage solution? Health & safety; first aid kit, integration with dust extractor and I’m in VA much hotter than OH so a cooler is not a luxury item? Organization; Can you get different color boxes to reduce your cognitive load while working? Drawers; does your system offer them? Cart and trolley; can you get them? So I’d very much like for you to give me your opinion of why you think that the packout is Miles above the competition? I use DeWalt Tough System (need water tight and durable. Half the price of packout but definitely not half the quality.)on ruff-ins, and Bosch L-Boxx on trims, finals, power ups and in front of end-users.

The Uk 🇬🇧 packout tool box has a stiff hinge so it clicks into place and no need to slide it forward.

I'm also a Locksmith and Access Control Tech. Recently I've moved away from Locksmithing in favor of commercial Access Control. I make a lot more money. I also use the Milwaukee Packout system. But, the only box I have tools in is the bottom box. The rest are dedicated parts box's. All the tools I need are in my two bags. I use to have Veto bags, but I think there ugly, too heavy and way to expensive. I now use the Milwaukee Packout Backpack for my Locksmith bag, and the Milwaukee Packout Tech bag for my Access Control bag. I use the big Packout box for wire, conduit and larger tools. I have other smaller Packout boxes dedicated to connectors, misc commercial lock parts, residential lock parts, Access Control parts, ext. I take the boxes I need in that are specific to the job. Oh, I full agree about buying high quality tools. I spare no expense. All my hand tools are either Proto, Snap-On, Knipex, or Klien. My power tools are all Milwaukee Fuel. Even my lock picks are the best money can buy, Peterson, and Mulipick.

do you always keep the tools In the packout?

Great video man

i like your cross and shield sticker i got a hat off amazon with the same design and color

A broke ended tape measure is also a nice tool for fishing down walls if you build a tip to guide.

Milwaukee makes a straight jaw set of adjustable pliers that blows away channel lock. I was a fan too until I found them, never going back.

What products do you use to clean your tool boxes?, awesome video

Thanks for showing off your kit man. And I didn't know that Milwaukee tools were made in Germany... ... ...just kiddin'. I like those packout boxes though. Nice. Oh, and if you've not heard of the "pliers wrench" (by Knipex. Pronounce it however you like, haha), they are probably one of my favorite tools I've bought in the last few years. "Real tool reviews" does a pretty good job of going over and explaining them if I remember right. But maybe they're not good for your application(s). I keep finding them coming in handy for all sorts of tasks.

Agree with you that 9 volt fuel i use all day every day. And my veto pack is best bag money can buy

Let’s be honest, everyone buys the latest and greatest tools. Ten years from now, you won’t be running the same power tools. I do agree with keeping your tools nice and clean.

Scott that was a great video thank you

As soon as you said respect and take care of your tools, I can relate to this ! I have some tools that are 40+ years old that look like new. And I like your set-up. Thanks for sharing.!

Good work brother. Organization is key.

Great video, thanks for the toolbox tour!

This is the second video of yours I am watching. +1 new subscriber.

Can you do a demo on the vacuum

Screw gun to install trim?

Great video!!!

This might be perfect to keep at my grandparents house i hate using his tools when i forget something at home

Do a video of your pre-wire bag

the lids will stay up if you lower the cart handle

I know this video is a little old but just came across it and subscribed if you're reading this I would like to know about the compact vacuum at the end my mother needs something small for the car I'm stuck between the teapot vacuum and the two gallon Milwaukee vacuum I have plenty of Milwaukee batteries just need opinions on the better of the two vacuums thanks for any help

Great Video

I would love to know how tall the handle is from the floor when the handle is in the down position. I hope that makes sence. I only have 20" of height in the back of my truck . And is the handle removable? Thanks for your time.

if you put the handle down the lids will stay up just fine.

Push the lid harder on the toolboxes. They wont break and they will stay up when clipped in

I have the rigid box system. I've had it for about 3 months and the handle is already breaking down. Think this would be a better way to go?

Hey man thanks for the vid

I like your setup. The only thing I dislike( and this is not meant to insult you, but to demonstrate my OCD) is the drill bits loose in the box. I would like to find a way to better transport these so that the sharp ends and sides do not hit against each other.

Great video. Excellent point about not beating your tools to death and then dragging them into a customers home or office. Grungy tools and filthy tool boxes and bags look bad because they are. Your idea to keep bit boxes and organisers in the Veto is excellent. Veto should ditch those useless bit pockets and make pockets or catches sized to these bit bixes from Bosch and Milwaukee. Best way to sort them. I would also like your opinion on the mid size Packout box. Would it hold tools like pliers and screwdrivers upright with an organiser of some sort? I am thinking linesman pliers, channellocks, 6 in screwdrivrrs. Thanks again. Great rig.

Where would i find the pack aid i tryed home depot app but it didnt come up...i have the regular milwaukee tool box and am intrested in buying the big box and stacking my current box on top..i dont need many tools for what i do

What kind of blades do you use for the oscillating tool? Do I search for "Japanese tooth blade" ?

Man!! how do you manage to keep tool organized. Every month I have to organize my tools cause when I leave the job site I just throw everything in the truck and leave.

Almost same as my set up but I use the veto back pack black

I 1,000% agree of taking care of tools.

Dang dude where did you get the step bit with the 1/4” hex from.??? How much use do you get out of it? (I probably use a step bit around 5-10 times a day.). Working on losing some weight in my first walk-in bag.

You gotta get the knipex cobras, they completely destroy the channel locks!

If you put the pull out handle down the lids will stay open

I see you don’t need many power tools. I use the small and medium cases for tools and blades and the big one for everything else.

for hammers i like a wooden handle cause it absorbs a shit load more then steal and fiberglass. also i would get a lighter head like 15 oz but its a use what i have so im suck with a fiberglass hammer too lolol. im waiting to get a nice wooden handle 15oz

Harbor freight has actual wrench rings that fit a full set from 8mm-19mm

I also prefer US or German. You can’t go wrong with this.

Great video. Fellow low voltage integrator and business owner. I just bought a packout storage system and was glad to see your setup. I’m curious where you are geographically? Do you use Facebook?

I only use USA and German made tools - holds up a Spanish made wrench. I'm not really a brand loyalist, I do try to buy for battery compatibility though.

Channel lock make the best pliers

There are no top handles on them so you can't carry a stack?

This is the third time i have watched this video!!!!

During the man's commentary he suggests looking after your tools . A view I agree with , I had a colleague who treated his tools with total disrespect ..one day his 3 month old hammer retaliated . The guy had a broken eye socket cheek bone lost about 6 teeth and a fractured jaw . I brought the same make of hammer at the same time , mines perfect but then I look after my tools

3rd armor! 10th mountain here

I’m glad I’m not alone. I got the packout system and also rock the veto pro pac. Not a fan of the packout bags.

I have a veto bag like that one and its soooo heavy loaded with tools.

Pack Aid! Great tip!!!! A+++++ 👍

Nice setup! Like and sub. 👍🏽

Channel lock doesn’t have a lifetime warranty I hade the same channel locks that went crooked from use and they told me to pack sand. Crap on channel lock I’ll buy anything else with a lifetime guarantee

Where are these boxes made?

how much does your packet weights loaded??????

Not very much about Milwaukee boxes... Mostly about the wrenches and staff you have in them.

That looks like a wood stepping bit

is the vacuum cordless?

How do you keep your tools so clean?

Which veto bag is that?

i make my own first aid kit cause the stuff in there is crap.... a clean place...would be your emergency blanket as a station. second you need a a way to tie up a severed limb. then you need a bottle of disinfectant, perhaps a way to cartarize a cut and super glue to stop the cut from bleeding, sewing kit will be okay too but you have to get the right dissolvable string. then i would get your bags of clean towels and large guaze pads. bandaids. pain killers, asprin, headache meds, heart burn meds, a few extra doses of your daily meds for emergency. sprain ankle wrap. meals realy to eat. thats whats in my first aid kit :)