Yep. Grew up in Michigan. Live just over the state line in the Hoosier state now. I feel your pain with the batteries. It is what it is though. Too expensive to replace them. My dad doesn’t bring them in and definitely has had to replace more then I have. Thanks for the comment.

I'm in northern VA and yes when it gets below freezing I bring my batteries inside as well

That’s awesome. Setting him up to be broke the rest of his life 🤣.

@@packoutjunkie5813 There are worse hobbies! ;)

Wow, thanks!

Thank you. Glad you are getting a new setup. Hope it works great for you.

You talking tools and boxes or just boxes?

Thank you.

Thank you for the kind words. I appreciate it.

Thanks I appreciate it. You will learn the in’s and out’s. Careful is a slippery slope. Packout Addiction is a very real thing.🤣

If you put the handle down the boxes will open and stay open.

I don’t think that was a compliment 😀

@@deatrixmuntz I take it as one. I take pride in keeping my tools clean. High School auto shop “clean tool is a safe tool” sticks in my head.

@@deatrixmuntz I Love my tools clean and neat as well but damn all his shit looks brand new

@@blaketripp7305 because they are new :)

Sarcasm is a national treasure

Thank you Sandmann5500. I appreciate the feedback.

But is that really a problem 😈

Your exactly right! But it’s really not a problem. Lol

@@packoutjunkie5813 no not totally but I am $7k into this packout stuff and tools

@@DumbCarGuy It goes so quickly doesn’t it. But totally worth it 👍🏻

And what about the weight? Once they are filled they are so heavy!

Thank you sir.

Yes I had quite a few of the DeWalt tough system as well. I think the weight is better with the DeWalt but the latching system is terrible. That’s what sold me on the Packout system was the ease of moving them around and latching them. The rest is history!!

@@packoutjunkie5813 After I returned it, I saw someone's video where he tested the toughness by dropping a drill/driver with battery on them. It bounced off of the Packout, whereas it went thru the Dewalt's lid. Made me happy that I switched~!

@@andrewbrown8148 I don't know what they did but I use the DeWalt system and it's tough as hell. You can break anything if you really wanted.

Yep. Since this video I have taken out the Milwaukee mounting plates and replaced them with 3D printed ones. I was able to fit three wide on a shelf instead of two wide with the 3D printed ones.

Awesome. I am glad you found it useful. I have an update video coming soon. Subscribe for more!!

I know right 😎. Thanks for watching.

I agree. I feel that Milwaukee missed the mark on some of that stuff. I don’t think we should have to turn to aftermarket 3D printed stuff to get it right. For the level check out the flex stack pack level holder. They are built well and they adapt to the Packout easily.

Thank you. I appreciate that.

I am interested to see them in person. I like the idea but not sure if they will work for me.

Thank you. I appreciate it. I want to do an update video as I have changed a few things around.

Me too!!! Those 12ah batteries are crazy expensive!!

Here is what the engineers at both Milwaukee and DeWalt say about chargers and batteries. Charge the battery in the charger that it came with. Older, less technological batteries will last longer when used in a slower charger. The new/newer batteries have the technology to communicate with the new/newer chargers which will keep your batteries "healthy"(?) longer. Can it be a pain? Possibly, but if you have a color code, be it paint/tape etc. on the batteries and chargers, it isn't that hard to keep track of which goes where.

Right on!

You and me both.

It is an addition for sure. I have thought about the drawer units but I think I am going to have to wait them out and see how they work. I have eyeballed the installation driver for a while as well. My dad has it. Maybe if a deal comes around again I will grab it. Check my video out on a DIY Packout cart. Let me know what you think, since you have legit one. It’s not perfect but works.

ebay

I have thought about the foam. Have to see how everything gets set and then go from there. Thank you for the suggestion.

It is pricey for sure. I only had a few DeWalt boxes when I switched. The Rigid is a nice system and they have come out with quite a few newer boxes lately. I would have a hard time switching to if I was that committed. You will not regret switching when if you do. Just be careful it is addictive. 👍🏻

@@packoutjunkie5813 oh yeah! I have been watching as many vids as I can as to arm myself with as much info as I can. I’m leaning towards the drawer style for tools and the clear lid style for fasteners!

@@funfreq9282 The drawers are really awesome. I have one 2 and one 3 drawer units. Looking for one more of each for my trailer.

Thank you. I appreciate it.

I agree with you all the way around. I am working on getting more drawers myself. Agree 100% on the dolly as well. Check out my DIY dolly video for what I did.

I appreciate that suggestion. Thank you.

I try to do that the best I can. I agree with you though it would be nice.

Glad you enjoyed it. Thanks for the comment.

That could be a possibility. Thank you for the suggestion.

I use mine and keep them clean ,its not hard , i hate seeing boxes full of pigged out tools .

Many options to fit your needs.

I agree 100%. The my drawers were some of the last things I bought and really like them. Keep my trailer organized quite well.

Ha ha. They are 1/4” sanded plywood. Made a hole at the top to be able to pull them out. You will have to trim the bottom a little to get them to fit they are not completely flat.

It is an addiction for sure. All my trips anywhere seem to make sure and go by a HD. I have no idea why that is 🤣

Glad you enjoyed. I have seen that charger. I was going to order it but a buddy has it and was a lot larger then I expected.

That’s a really good idea. Thank you.

@@packoutjunkie5813 except that only masks the smell for a while.

Honestly I think it stuck around from my old DeWalt 18 volt Ni-cad battery days. Quick charging them just killed them. I know the Lithium Ion batteries are different but I just feel that rapid charging anything isn’t the best way to go. With the large batteries manufactures are going the way of the rapid charge all the time. I guess time will tell. At $200 a piece for the 12ah batteries, I am not sure the risk is worth it. Just my opinion, no expert.

Glad you picked up something cool. Remember the camera takes away the dust 😜

Hahaha. They all do look very new but I am breaking your balls out of jealousy. You have nicer tools than me, all your stuff matches, and you are super organized. I wish I went with Milwaukee cordless tools but I started with makita and before I knew it I was way too far invested in makita to make the switch. Maybe when some of my stuff starts dying on me I will slowly switch over. Awesome gear and set up though

I appreciate it. I was committed to DeWalt before this however the flexvolt stuff took me out of the game and frustrated me that it wasn’t always compatible with my existing 20V. So I made the switch, haven’t looked back. Didn’t loose out too bad on the switch. I am full committed now though. Makita makes some awesome tools. They all have there niche.

I agree with all your points! Like I said I install cabinets ,which we build as well.. Even using a 17 ft box truck with a regular cab, room is at a premium. My regrets. #1 living in SE Ga it gets hot,and the PO cooler doesn't hold ice for a full day. I freeze several water bottles and spread them among the rest inside. Cases of water bottles are stored in the refrigerator, just have to remember to move them back in from cooler in the evening. #2 bought several mounting brackets that I really liked for just a couple of crates,but they definitely lose to much space when you add more. #3 rolling toolboxes of which I have 2,I keep belt sander in 1 and that is about it so it's a huge waste of space. I plan to adapt a cordless ridgid shop vac into 1. It begs a static tool ,vacuum, inverter like Dewalt (which I will not do),or an air compressor. #4 the new $200 dolly, it's very flimsy feeling, takes 3 hands to fold it up, wheels are inboard which wastes room at the rear. Pro's #1 the latch makes it 5x better than any other system except systainers, but 20x stronger than. # 2 accessories galore,and more coming. Currently have everything except the ammo-can,and several open totes. I use primarily m12 for space savings. 1 large box is the only box with foam,Makita x2 tracksaw/Makita barrel jigsaw and 8 batteries (xtra for x2 mitersaw and router) inside. Individual 1/2 sizes carry tools with 1 battery and its bits/blades. M12 sds,hackzall,jigsaw with coping foot,omt, Makita router,Ryobi 23 g pinner,and a Fein supercut.

Is the surge that much quieter? I have eyeballed the installation driver for a while, just haven’t pulled the trigger. So you use it a lot?

@@packoutjunkie5813 yes it is,especially inside cabinets. It doesn't have the same feedback as an impact does when the screw gets tight. A small learning curve.

I lived in Coweta county for 4 years, SW of Atlanta about 45 min.

They are free standing and work great. Never had a problem.

Sorry I missed this. There is what I used. www.ebay.com/itm/Milwaukee-Packout-Tool-Case-Box-Wall-Mount-Hanging-Cleats-/184176021325?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

They are Occidental Leather OxyLights. These are the bags. www.occidentalleather.com/systems-leather-nylon.php These are the suspenders. www.occidentalleather.com/product.php?sku=5055

@@packoutjunkie5813 wow super fast reply! Thank you! I was going to pick up Milwaukee carpenter belt but yours look nicer.

@@20DDan They are not cheap. However I have had mine for 15 years and my dad had had multiple sets for 20 plus. Well worth the expense in my opinion.

I don’t use the silica packets in the Packout boxes. I do have them in my mechanic tools in my garage tool boxes though. Not a bad idea with the Packout though. Will have to think about it. Thank you for the suggestions.

Good one. I agree. Used to be 100% DeWalt. Made the switch two years ago and am not looking back.

I have seen quite a few Fire Depts that have a nice Packout setup. It is pricey, but you have to pay to play right 😀

Still working out the details. Thank you for the suggestions.

Ha ha. I have heard that before. No office here. I do take pride in taking care of my tools though. Glad you enjoyed.

Ya looks nice, when you pay thousands and thousands for tools and equipment, gotta keep um up

Did you watch the video dude?

It might sound crazy but some people actually take care of their tools