Video was too long. Halfway through it, I got hungry so I left it playing and went to the kitchen to fix myself a sandwich. But then I found out that I'm out of mayonnaise so I went to the store to get some. There, I saw the most beautiful woman I have ever seen in my whole life. But I'm really a shy person so I took up a three-year personality development course so I can introduce my self. She was very friendly and all, but unfortunately, she has a boyfriend. So I said, all good, I'm a mature person. I want the best for her and I harbor no illusion that I am the best person for her and she seems happy with her boyfriend, so I did not bother her anymore. But we kept in touch and we became friends and I got over my crush on her. Then she broke up with her boyfriend, we drank some alcohol because of it, I told her she'll be fine and I wished her well. I still think she's the most beautiful woman in the world, but like I said, I am over my crush on her. It was like five years already when I first saw her. Besides, I am quite happy with the friendship I developed with her. It was more important than a crush. So we kept hanging out, drinking, having coffee, and all. I had a girlfriend, she started dating other guys. My girlfriend wants to live some other life without me in it, so I said, okay, I want the best for you and I want you to pursue your happiness. My lady friend and I drank alcohol about it, and she gave me the same advice I gave her when she was in that position and I became okay with the breakup immediately. But we were really drunk, so she spent the night in my apartment. I only have one bed, so you know what that means: She took the bed and I slept on the couch. But on the couch, I really can't sleep. Something was bothering me. So I tossed and turned for about three hours, then I finally can't take it anymore, I stood up and went straight to my room where she's sleeping. I approached the bed, gently sat on it and I reached for her shoulder to pull her closer to me. She stirred and woke up. She asked what's up. I told her, you know, the first time I saw you, I was watching a video and left it playing to get my self a sandwich then went to the store to get some mayo then I got distracted by life that I forgot to finish the video. She said, you know what, I've been wondering about a weird noise in your night drawer. So we opened that drawer, and lo and behold, there's my phone and this video still had four minutes of play time on it.

10 ° C difference, Cool😎! The bearing also helped by lessening resistance.

ナニコノストップウォッチかっこいい！

モーターの軸の延伸とかすごく無い？ ちょっとでもズレたらブレブレなるの違うか。

hello sir, may i know how to put in the mini 4wd chassis. a video perhaps. thank you.

作業音がうるさいのかと思ったらBGMで草

Could it still fit in the car?

Do you know anything about a Hirobo Top Gun 9017?

I think it works by how coil inside get cooled. The idea is good by the way. It will be working efficiently with holes at opposit side of fan i guess.

仮にミニ四駆で使用する場合、空冷ファンからの冷却風は前方からの気流で後方へ流されてモーターに届かないような気はします。 ファン有りとファン無しのミニ四駆を用意して、同条件で走らせたのち走行後の温度を計測してこそ意味のある検証だと思います。 ただ、こうしたアイデアを発想し、それを実行に移す行動力・技術力には脱帽です。

Thats cool.... Cooling system for 4WD motor

I doing just simple, sand the motor surface body then put heatsink on it and the motor stay cool

Very nice. Put bearings in front and rear...no fan and repeat the test.

器用にモーターを改造しますね！参考になります。

空冷化すげぇ！（唐突におすすめに出てきた民

凄いなぁ

スゴイ技術！ きちんと冷却性能がアップしてる！

If you'd drill small holes on the other side of motor it would be even cooler because of direct through air flow.))

U gave us an idea to make a plasma dash double shaft

Too much effort plus it's illegal to use in most races. But thumbs up for the idea👍

Good for long trip... but i think it’s heavier for speed

You earned my like with that music

ช่วงนั้นผมก็ทำแบบนั้นเหมือนกัน ตัดพลาติกออก เท่ดี โชว์มอเตอร์ แต่ขอผมมันธรรมดามากกว่านี้ มอเตอทั่วไป รถแข่งคันล่ะ ราคาไม่เกิน80บ.ที่เคยซื้อมา แพงสุดล่ะแถวบ้านผม นานมากก คิดถึงเลย😂

what is this backround music? thanks

Please do a boat using Tamiya Mini4wd parts.

10℃以上差が出るってすごいな

The music intro was awesome.

Can this motor be inserted into a crash gear?

.....我覺得貼石墨烯會不會比較理想？

後は、実際に負荷を追加した特性が 見たいですね‼️

BGMと畳がマッチしてて草

*PERFECT..!*

Excelente 🇩🇴🌎

What ball bearing did you use sir? Thank you

What's the purpose for the gear in back that you added last?

is it faster then a chili motor

What is your background music? Please reply! TIA

What' title of music you used? I think it would be possible to mount a smaller fan "inside" the motor can in front of the rotor.

熱の影響における、回転数の変化の関係は何かあるのですか？

Is it blowing air into the motor or pulling air out? I think pulling the heat out would be better than blowing air into the motor. Since it’s already illegal modification, making some hole in the motor casing should increase the air ventilation and further cool it. How is the RPM? Does it get higher?

The issue I have with this mod is the motor shaft cyano does not have alot of shear strength with metal a better option would be to rough sand the shafts and then use JB weld to bond the part together. How much power are you losing with spinning that fan? As far as the heat test I don't see any real gain other the the fan is only slowing the heating, but is that really that significant and necessary.

What's the name of the song?

So.... did the guy in the left lane or the right lane win?

Nice ,have you tried using in on double shaft chassis?

これはやってみよう 無茶苦茶楽しいやん

wouldent it make more sense to just heatsink the motor?

フリクションロスは大丈夫なんですかね？

So now how will u gonna put that in chassis

Please tell me the name of the song

Nice ..

大きな発明、プロペラは非常にかわいいです

По моим расчетам, он расходует 4-5 кг плазмы на 1 парсек, что невероятно расточительно, по современным меркам.

更に外装にエアロフィンをと思います。冷却効果が高いでしょう？

yes! time to go back to 1990 and win those races.

Nice

実際にモーターに負荷かけて、さらに車体に組み込んで風通しが悪い環境になれば、もっと明らかな差がでかもですね。

it is not a fair test, because the original one spin faster and draw more current, thus more heat given out from resistance of wire.

I think its for the heat getting of the motor

Lari nya apa se kenceng standar nya? Atau lebih kencang?

Speednya ada beda ga,..???

もはやここまでいくと凄すぎて参考にならねぇwww

I don't get it what does it do or what is it for its nice knowlodge though is it for like rc card or planes

Nice video but the fan does not remove power from the shaft? You can mese sure the rpm

晴らせぬ怨みがありまする どうか晴らしてくださいまし... しかしいい仕事してますね

you can olso bend the tabs all poining to the motor to uses that sprocket on the back it well cool it just as much to just move the air

Nice work man. That was for durability. But again, when you play tamiya, speed is most important, maybe you can show us the effect to the speed (rpm), was it increased or?

logically electronic parts got slow down when heat built up.i think with cooling fan,rpm much more stable then without fan

四驅車行進時是有撞風在幫助散熱 此影片卻是馬達靜態運轉無撞風幫助散熱 所以我覺得應該要有風扇跟無風扇一起動態測試才準確

側に冷却フィンつけて冷却効果を上げよう

That music made me feel like I was watching an old Yojimbo movie LOL. Thumbs up XD

👍😲

Fantastic

Muy bueno

外国人にもミニ四駆って人気なんですね笑コメントに日本語が少ない笑

What about the rpm & the power?

its cool

666666 这空气动力真的是把我逗笑了 别说要装在车上 效果应该蛮不错的

Jadi ingat dulu. Waktu masih main tamiya

How is it illegal again??

แจ๊วดีจังนะจ๊ะ

thanks for this vid. now i have an idea how to modify a plasma dash by putting 520 bearings

すげぇ技術持ってんじゃん

Mi abuela tiene un biombo

車のラジエーターもそうですが押し込み式よりも引き込み式の方が冷却効率が高いそうです。これだけ隙間があるとどちらが効率的なのか疑問ですが。

I thought it was a dual shaft plasma convertion😂 lol

エンジン式にする？

最初はそんなに変わらんと、思ったが後から差が出てきますねー

ファンの反対側の軸周りの穴は拡張したのかな？エアーの抜けが良いと効率が良さそうだけど、 どうでしょう？

8°c-10°c difference wow...

Wowk itk work🐧

Wow,

Just drill some holes on the motor caps and it will air-cool. Fan is only useful if it is stationary.

10度差はすごい

主水さん、出陣！！

nice

Mantul gan

Yeah, what is so illegal in it ? Found already the answer, but it is obvious that motor was modified :) just look at it. Don't think the "fan" makes any difference. Bearings lowered the resistance so it is now cooler. I might be wrong but ...... nice anyway

Kaze yo hikari yo seigi no inori Kaware shishimaru, raionmaru ni- Nihon no heiwa wo mamoru tame Ankoku majin wo ya'tsukero- Ima da ima koso henshin da- Hashire raion Tobe tobe raion Yuku zo kaiketsu raionmaru-

Ma l’unghia è compresa nel kit?

Y por qué es ilegal ?