Mini Jig Saw Restoration | Black and Decker

Рет қаралды 154,201

4 жыл бұрын

Jig Saw Restoration Video
I found this jig saw from Japan recycle shop in my city.
I spent 10$ for this tool. I see broken power cord. It must be dangerous If I test it without checking the power cord. ⚠️I want you to be very careful about second hand power tools. Especially aluminum body power tools, it can shock you. ⚠️
B&D Black & Decker
Model 7515-03 JIG SAW
VOLTS 100 AC 50/60Hz AMPS 2.4
MADE IN CANADA PRINTED in USA
I hope you find something useful & enjoy this video!
I am happy to receive your feedback, advice, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
**I still keep some parts, I want to save the world's environment**
--------------Thank you so much for Likes & Comments--------------

Пікірлер: 124

@rla26368 4 жыл бұрын

Anyone else obsessed with the sound of the grease knife against the metal tool parts (14:22)? I could listen to that for hours. IDK why I like that sound so much. 🤷‍♀️ Beautiful restore too BTW! 👍

@ElectronicsForFun 3 жыл бұрын

I bought a few of these old black and decker tools at a thrift store. I knew right when I SAW (lol) them they would be coming home with me. this was back when black and decker still made quality tools.

@gordbaker896 4 жыл бұрын

Very well done. Thanks for NOT adding music. Those were good tools 1950-60's. Use the least amount of power wire brushing to keep surface profile rough not polished for coating bonding.

@mmon764 4 жыл бұрын

You are very skilled and knowledgeable Mr. Gear Show. Very good restoration and video quality.

@bobferranti5222 4 жыл бұрын

I would love to find a jig saw like that one, they always worked and never failed. Great Job!

@nabeelzaini 4 жыл бұрын

Very good job sir

@sergico777 4 жыл бұрын

Класс! На вашу работу можно смотреть бесконечно!)

@VictorGallagherCarvings 2 жыл бұрын

I wonder how many people have started restoring tools from these videos ?

@KingOfSpite 3 жыл бұрын

I just bought one of these for $10CAD. It works but it's filthy. Gonna go tear it down and clean it up now. I'll pass on the repainting, though. Thanks!

@gibbo9089 4 жыл бұрын

He must have a wardrobe full of those denim shirts.

@gordbaker896 4 жыл бұрын

So do I!

@csecomp.2nd993 4 жыл бұрын

I just love what you do to these poor tools 🖤

@yeagerxp 4 жыл бұрын

WOW !!Very good restoration 👍👍👍 . I have the same model which I inherited from my father. Will use your video as guide to restore it.

@infiniLor 11 ай бұрын

Wow, that was extremely thorough! Thank you!! Now I'm going to have a go at mine - won't be repainting, though (but damn it looks good!)

@sharukhmatekuki5830 2 жыл бұрын

Good hit🇮🇳👍👍 Kuki

@mohamedalli4832 3 жыл бұрын

Good work buddy

@gear_show 3 жыл бұрын

Thank you! Cheers!

@derofromdown-under2832 4 жыл бұрын

Nice job painting straight over rust... 8/10

@garyjones7198 4 жыл бұрын

Just when those tools were looking forward to retirement, you put em back in the field for another 20 years... Nice job...

@user-jr8gp2en9b 4 жыл бұрын

Very nice job.

@Nickword1 4 жыл бұрын

Always love drill restoration vids!

@Abo_Zead 4 жыл бұрын

You are always creative from Saudi Arabia🇸🇦👍🏻

@alejandrop9910 4 жыл бұрын

Nice job!.

@maxcetico 4 жыл бұрын

Very good job!!! Brazil in here 👍

@rubenl6228 4 жыл бұрын

The best

@nicoch59 3 жыл бұрын

Very resistant without any bearing.

@justinbelshe 4 жыл бұрын

Awww, I was hoping you would polish the housing and clear coat it. Still, the silver paint looks nice, and is correct, but polished aluminum is magical.

@cfd3lsd 3 жыл бұрын

I have this same model in slightly better condition as yours before the restore. Maybe I should make this my next restore.

@chadjazeera9960 3 жыл бұрын

Amazed those brushes were still good... Great job!

@ElectronicsForFun 3 жыл бұрын

I am sure they have been replaced before.

@ianvicedomini2648 4 жыл бұрын

Nice job mate

@DokBormental 4 жыл бұрын

My mechanics set the standards 👍👌

@user-dx6pt9oo6h 4 жыл бұрын

Hi Gear Show 👋👋👋 your restoration work is magnificent 👍👍👍

@retronnaldestersonterson 4 жыл бұрын

I always waiting for your new video All your video that post on youtube is awesome I give you one like to you .Good job. It doesn't work anymore, Your restoration any kind machine. You always make it work. These Comments For You !!! You always make me happy. I watching your video to get rid of my stress. All the machine smell so good and wash with soap

@piersonwatchman2620 4 жыл бұрын

It always astounds me the time and effort you put into each project. I love the videos so please keep them coming!

@minhphuong70vu22 4 жыл бұрын

Good video clip

@pazerfaust45 2 жыл бұрын

Ready for another 60 years of service.

@carboumen7661 4 жыл бұрын

Bien hecho 👍

@DungcuJapan 4 жыл бұрын

Good good

@ridamhaouch2811 4 жыл бұрын

you are good in this bro!

@mikesbarn1858 4 жыл бұрын

I have 2 just like that but mine are clean and in good working order

@mpalaskokkalis1476 4 жыл бұрын

Τέλεια η επισκευή της σέγας αξίζει τον κόπο.

@alanmcwilliams4264 4 жыл бұрын

Back in the day when they made decent tools

@QuintinGellar 4 жыл бұрын

YAYYY MAKE A NEW PART... Wrong channel 😬

@markharris5771 4 жыл бұрын

Another great restoration, it looks superb.

@gear_show 4 жыл бұрын

Thank you!

@flightworks6874 4 жыл бұрын

Awesome

4 жыл бұрын

Great video! What type of glue do you use to re-stick labels on tools?

@markjeffels3327 4 жыл бұрын

I inherited one of these from my dad.

@assembly_language3948 4 жыл бұрын

Ah, a tool from the Before Times, when gears were made from steel and not plastic...

@cbalan777 4 жыл бұрын

Do they really make the gears from plastic now? I wouldn't be surprised if so, but that just seems ...dumb.

@flightworks6874 4 жыл бұрын

C. B. Alan break faster means more money so not stupid for them

@cbalan777 4 жыл бұрын

@@flightworks6874 Planned obsolescence, huh?

@martianmanhunter7925 4 жыл бұрын

True now they used recicled steel mixed with cheap materials including plastic.

@flightworks6874 4 жыл бұрын

Martian Manhunter there’s nothing wrong with recycled steel, it is the same steel and the plastic on the other hand is cheaper however for the external body it is fine because it is rigid enough and is also safer because a metal body can become live if there was a fault in the wiring

@stormkhan4250 4 жыл бұрын

I have a very old Black & Decker jigsaw I inherited which seems older than this one. It seems to be an attachment to a regular drill with the drill part having a special attachment where the chuck goes instead to drive the saw. Even the Black & Decker logo is in cursive script instead of the usual block lettering. This makes me want to get it out and have a go at restoring it. :)

@gear_show 4 жыл бұрын

You should try it. thank for sharing!

@barthanes1 4 жыл бұрын

I have a B&D drill from that same era, and I'm still collecting parts to restore it. I need to buy a bearing puller to find out what bearings it needs.

@lakhdariboualem1550 4 жыл бұрын

boualem algerie bonsoir monsieur gear show merci pour la video cest tres genial bon courage continuer

@c.l.8414 4 жыл бұрын

Bello.saluti.

@oilczar 4 жыл бұрын

Love these videos

@gear_show 4 жыл бұрын

Thank you!

@jubirkansa1606 4 жыл бұрын

Gear show best of the best

@aguilayserpiente 4 жыл бұрын

What was the source for the new switch? Obsolete switches are the stake through the serviceable power tool's heart.

@markk3701 4 жыл бұрын

Next time use a heat gun or a hair dryer to remove the sticker :)

@user-ig2uu7gp6k 4 жыл бұрын

Очень свежо: сначала обмотку вычистить, а потом прозвонить - вдруг нерабочая...

@fernandoqueirozpopovic7024 4 жыл бұрын

I got a new one of these it's some sort of high tech endurance jug-saw but it's loud af...fortunately it has a laser sight (out of focus) a light and 3 blades just in case

@nserestoration2271 4 жыл бұрын

🔥🔥👌🏻nice👌🏻🔥🔥

@hansamsterdam2635 4 жыл бұрын

Excellent

@gear_show 4 жыл бұрын

Thanks!

@walperstyle 4 жыл бұрын

I own that same one.

@caribmedical57 4 жыл бұрын

I only have one "burning" question, do you test the motor before putting everything back together? If it was me, with my luck, the motor fails to work after the reassembly is completed. 😭 Nicely done, they don't make it like that anymore. 😊

@aboassamAno 4 жыл бұрын

جيد جدا

@AndreasHagelberg 4 жыл бұрын

Really great, but I have one objection. If you plan on actually using this machine you need to remove the solder joint and crimp the wire properly. Solder joints are not safe because the vibrations will cause the solder to break and the wire will come lose. Since the machine is grounded it's not disastrous, but it's still pretty bad.

@gear_show 4 жыл бұрын

Okay, thank you for the feedback.

@user-lololo 4 жыл бұрын

А задню и передню втулки не смазал , только механику и все ....

@zik316 4 жыл бұрын

Love the channel but please no more music. The sounds of you working are far superior.

@alexzyra 4 жыл бұрын

Слишком просто для вас

@trungphamhoang5068 4 жыл бұрын

nice job. But if u take more time in anti rusting, it is better.

@universite 4 жыл бұрын

Надо сначало химией снимать ржавчину, а только потом полировать железной щеткой!

@bbs1 4 жыл бұрын

so grease is for what exactly? less friction? or does it reduce the heat that is created? or both?`sweet restoration btw :)

@gordbaker896 4 жыл бұрын

Gears and sliding parts require lubrication.

@hungdinguyenquang5627 4 жыл бұрын

👍👍👍👍❤️

@whoolph 4 жыл бұрын

What adhesive did you use to reapply the BLACK & DECKER decal? Thanks!

@gear_show 4 жыл бұрын

I use 3M adhesive.

@whoolph 4 жыл бұрын

@@gear_show thanks I'll try it!

@ComeOnYouBoyzInBlue 4 жыл бұрын

Why do you grease screws?

@philippeplouchart8156 3 жыл бұрын

I used turpentine to clean mine.

@arturlend2297 4 жыл бұрын

🇵🇱 👍 👏

@MrRisovalchik 4 жыл бұрын

Валы ротора не смазал. Дизлайк, за рукожопство.

@tnx4info 4 жыл бұрын

Whats those tiny things used for that he takes out first? :)

@plopkus 4 жыл бұрын

Motor brushes

@nathantaylor9998 3 жыл бұрын

What was the tool you used at 10:06?

@ahmedahmadey5136 2 жыл бұрын

😺😺😺😺😺😺😺😺😺😺😺

@hardyanpajero69 4 жыл бұрын

👍👍😎☕🍩🔧🔨

@Adrien-is-not-here 4 жыл бұрын

2:55 forbidden vegemite

@BGCoop79 4 жыл бұрын

What kind of multimeter is that?

@gear_show 4 жыл бұрын

It regular multimeter.

4 жыл бұрын

@kirbyskilldustbunnys 3 жыл бұрын

hey does anybody know where I can get those carbon motor brushes for this jigsaw I have one as well but it needs new brushes if anybody knows where I can get them please reply or comment to my comment

@nicoch59 3 жыл бұрын

You can contact: carbonbrush.com/blackdeckerbrush.htm with the Jigsaw ref

@krtekcyberpunker 4 жыл бұрын

Zapomněls na olej.

@emils9826 4 жыл бұрын

15:08 irritate

@dg.creacionesenmadera3885 4 жыл бұрын

Salió mal el video amigo

@PVZBlover 4 жыл бұрын

Restored Black And Decker Power tools Must Be Painted Color Orange And Why Did You Painted A Black And Decker Jigsaw In A Silver Color?

@FuhqEwe 4 жыл бұрын

Fast forwarding instead of jump cuts ruins every restoration video I've ever seen.

@legorulez49 4 жыл бұрын

Don't show the finished product in the thumbnail

@gear_show 4 жыл бұрын

Okay! but why?

@legorulez49 4 жыл бұрын

Because if you show the finished product in your thumbnail, people will know what it will look like when they see it.

@andrewgeorge6351 4 жыл бұрын

You used the wrong paint on base of the jigsaw as I noticed it was coming off you should have used a inamul base paint not a gloss one ok.

@bjoe385 4 жыл бұрын

Andrew George Enamel

@gordbaker896 4 жыл бұрын

inorganic zinc primer is the best choice. NOT enamel. What do you use?

@thecynic807 4 жыл бұрын

Black and decker was always cheaply made. No bearings? Funny this is made better than some of todays tools.

@aislynroake2666 4 жыл бұрын

What is your first language and if you speak anymore

@HYP3RK1NECT 4 жыл бұрын

SAOP?????

@signedelacroix7213 2 жыл бұрын

How to find brushes?

@user-cx5cg7wg2o 4 жыл бұрын

РУКАЖОП....

@user-je3xc8fr6l 4 жыл бұрын

Попов ты как всегда в точку))))

@user-nh9et5pb7s 4 жыл бұрын