Miniware TS1C Cordless Soldering Station review

Рет қаралды 19,070

Күн бұрын

Ebay store: www.ebay.co.uk/usr/sorinelect...
WebSite: sorinelectronics.com/
Patreon support: / electronicsrepairschool
KZfaq Members: / @electronicsrepairschool
Forum: forum.sorinelectronics.com/
Discord: www.sorinelectronics.com/discord
My tools: www.amazon.co.uk/shop/electro...
PayPal me: www.paypal.com/paypalme/Elect...

Пікірлер: 84

@carlosgonzalez3584 11 ай бұрын

Hi Sorin, we need more videod, every morning when I wake up I look for something new to watch.

@DumahBrazorf 11 ай бұрын

Very neat execution. A practical use of supercaps.

@Pirelli. 11 ай бұрын

Very cool tool. THX for show us Sorin! ☺

@orosalsero 11 ай бұрын

Nice little tool, I have a cordless one about the same size that I bought around 20-25 years ago and it still works, it heats up using butane fuel you fill it up like a cigarette lighter. I'm sure I bought it at Radio Shack when they where still around.

@GregM 11 ай бұрын

I have a Black and Decker unit like that one. Nice to have when out on a job and need to solder something up.

@FVEBlog 11 ай бұрын

I have TS100 from Miniware and it is super useful. Sorin, it 20mA there, not 200mA. Nice review.

@Fred-B 11 ай бұрын

It looks very cool. I think I will put some double sided tape under the base as it looks light and prone to travel around the desk ( that might annoy me to have a travelling base). But definitely an interesting tools for on-site jobs.

@fendularatsq2317 11 ай бұрын

this looks amazing, super cap instead of battery sold me, enjoy it

@Fourty_7 11 ай бұрын

Hi Sorin , Thanks for the all the knowledge and fun you are sharing with us ❤ , i've been watching your channel since 2 or 3 years maybe . Last week i watched the crash course part 1 but when i wanted to continue with part 2 ( the chargin circuiti think ) unfortunately i found that is reserved only for membership 😢

@tellolite 11 ай бұрын

Impressive. I'd like to try one

@viniciusvbf22 11 ай бұрын

The reviews where we open the thing up - my kind of reviews. Like the ones I do in my channel - well done! :)

@weerobot 11 ай бұрын

Miniware are Top Notch...Very Impressive Company...

@Leif_YT 11 ай бұрын

They have the bend tip J02, but often you're loosing a lot of thermal power with such tips. My favorite would be the D25 they offer. I'm using a D24 on my JLC for 90% of the stuff i do. It's a great average size. Not too big, but also not too small so it still has a lot of thermal mass.

@TzviHershtik 11 ай бұрын

I love the fact it's repairable

@nilomyki 11 ай бұрын

I wish they had incorporated a similar tip removal procedure like the TS80/P and had added some sorta heat-resistant silicone in the Iron Holder portion of the Station to prevent accidentally burning the plastic.

@GlishaSo 11 ай бұрын

i am still using ts100 and i am rly rly happy with it. maybe one day if i got more money i will get this it looks rly good and practical.

@masterliu1892 11 ай бұрын

😀

@Brycereigle2000 11 ай бұрын

me too, had it for years now. did your screen go bad? Mine has had a faulty screen for longer than i can remember, and I just use it by memory lol

@GlishaSo 11 ай бұрын

@@Brycereigle2000 nop still function like first day thanks god its rly amazing. will runn it until it hold :D than we will see market is crazy look this soldering station crazy no wires nothing ... :D

@ChrisPavlides 11 ай бұрын

When i saw it, i was like "TAKE MY MONEY". Just ordered, can't handle to not do it. I hope this is a good quality and this super capacitor will hold for a long time :)

@ChrisPavlides 11 ай бұрын

Comment No3: Now Sorin, will use the Proper cool Soldering Iron to make Proper Calibrated Fuses :D Sorin, the commend is with love :)

@andrewverran3498 10 ай бұрын

this looks very nice . how many amps does it pull when on? I use a Wahl ISO-TIP 7700 NICAD rechargable soldering iron...just have to make sure you use them every couple of days or the Nicads die . Peace fromOZ

@stigonutube 11 ай бұрын

agree, proper Cool..just stand could use improving the ergonomics?..i still use ts100 and it is fantastic for diy.

@svanput 11 ай бұрын

in mother russia, metal solders you.

@ANSELEMUGWUMBA 11 ай бұрын

Hello sir. please am still a beginner what are the necessary equipment that I will be using and how to get them

@billjenkins9036 11 ай бұрын

AliExpress has 4 tips including the bent one and chisel 😮

@garrygibbons2989 11 ай бұрын

I think it's the TS-J02 tip your looking for

@highroyds 11 ай бұрын

I did see a review where someone put some kapton tape on the pcb over the screw terminals to stop everything moving

@m7mds91 11 ай бұрын

Amazing features. everything now changes to wireless 😊

@getcartercarpark. 11 ай бұрын

What melting point is your "low melting point solder" if I may ask, please? I wonder how long it would be before an owner of this nice new iron pokes the hot bit into the base unit screen when they try and put the soldering iron back into the base unit?

@electronicsrepairschool 11 ай бұрын

180 C

@getcartercarpark. 11 ай бұрын

@@electronicsrepairschool Thank you, it's the same as the 0.8mm multicore solder I use. I had been thinking you might have found something slightly lower in temperature.

@victorkustov 10 ай бұрын

A cordless soldering iron is useful in the forest or in the desert. In an apartment where there is an electrical network, using battery-powered appliances is costly and not environmentally friendly.

@donniedarko7891 11 ай бұрын

Saw a guy who has a very special version of a soldering iron, and he took a lighter and tied some copper wire, so it curved around the end of the lighter. Turn it on and quickly solder something to a motherboard... what do you think, Sorin!?

@gymstrengthhakim8453 11 ай бұрын

Very usefull

@vytautasslenderis2702 10 ай бұрын

I wonder if anyone ever tried Weller tips on these Miniware irons, as they seem to have similar connectors.

@Freebird57 11 ай бұрын

Hi Sorin, I have been watching your videos for a few years on and off now I am just a parts repacer really lol I watched this vid and went to the screwdriver one now may hands hurt with arthritis and after watching your review I have ordered the screwdriver SOOoooo if I don't like it I will blame YOU lmao kidding, I love the vids and I am fixing my first guitar amp fingers crossed, the parts just came today. Regards Paul .....

@Freebird57 10 ай бұрын

love the screwdriver thanks for the tip off and also fixed my guitar amp dbl hit ;-) keep up the good work Sonin

@finhas8865 11 ай бұрын

Now I want to buy one and i don't even solder much.

@carlosgonzalez3584 11 ай бұрын

From Venezuela

@SMFJose 10 ай бұрын

Great

@eldjoesther643 11 ай бұрын

Very cool. But in our country we can't buy things with batteries inside. I don't know if that capacitor inside will be detected like battery

@andytipping70 11 ай бұрын

im sceptical! i would very soon tire of putting it back on the charger. cordless vor me is butane for in the field use. this is a gimmik - nothing wrong with a cable - you always know where the iron is if its attached to a wire right?

@orange11squares 11 ай бұрын

problem with buttane/gas soldering iron is that you don't have temperature control, you don't have screen to see parameters, you miss a lot of things, it is basically a primitive and bulky version of a cordless electric soldering iron.

@ablacon64 11 ай бұрын

7 minutes to work is fine but how much time does it take to fully charge between uses? Edit: just saw on their website it's 7 minutes to fully charge.

@luiscoelho6985 11 ай бұрын

That's cool

@Immuslum 10 ай бұрын

I left the computer on (toshiba r830-u16) until the battery ran out of charge and turned off on its own. When I got back, I turned on the computer, but it starts with a low sound and nothing appears on the screen. I removed the RAM and CMOS and tried the TV screen and the same problem remained. I need help, thank you.

@frankmormando3917 11 ай бұрын

I like 😊

@jamesthomas2417 11 ай бұрын

Hi Sorin, handy tool ,was told by a colleague that some hybrid cars have super capacitors ,I don't know if this is true my be fiction regards Jim

@lablackzed 11 ай бұрын

I love new toys.😂😂😂👍

@shaunmorrissey7313 11 ай бұрын

I Like that.

@ellfenoksiberia3790 24 күн бұрын

It's a hybrid with Li-ion, not really a supercapacitor. A minimum of 2.5V according to the datasheet, otherwise it will lose capacity. You can't close it.

@ellfenoksiberia3790 24 күн бұрын

What is this rosin? The usual one?

@ketanmorajker 10 ай бұрын

👌🏻

@belayinehfikre7470 11 ай бұрын

how do I become a member

@carlospenalver8721 10 ай бұрын

If you don’t want it I’ll take it. 😁

@MrFujack103 11 ай бұрын

Now we just need wireless multimeter probes. How nice would that be lol

@miftosaurus 11 ай бұрын

we already have for some time BT/wifi multimeters, thanks to miniaturisation, we already have some wireless probes... a bit bulky, but anyway... just a search for "wireless multimeter" will wield a lot of results, mostly exact!... :) the usual suspects: Aneng and Fnirsi! :D but i know their internals, well, not exactly, but i know the basic principle, so, i will craft mine, using some old parts and stuff... it will be bulky, but this will be crafted by my own hands, not shopped! :P (funnily enough, i have a non-working fitness bracelet, kid-size... i get it for free, because wasn't working, and i wanted it to reuse their internals: accelerometer, pedometer, etc., for a self-crafted Pipboy. before hacking and slashing, i tried to see what was the problem... ultra banal and usual, broken li-po batt, used a a power supply set to 4.1, it was working fine. checked his mcu, a reasonably... old Nordic nrf one... some site search and... he-he-heeee... now, i have something nice, to play happily!!! :D)

@user-pe3yi7hn1s 11 ай бұрын

There is a bent tip option on their website. . . . .

@Awynn0 11 ай бұрын

@ £105 from AliExpress it had best work nice!

@pauljatta4777 11 ай бұрын

can you help send me the Ali Express link. I want to buy the iron.

@skjatayumobileandlaptop1013 11 ай бұрын

Sorin you have addicted for rosin smell 😅😅😅

@melplishka5978 11 ай бұрын

The super capacitor will get way more cycles out of too.

@nicmate2543 11 ай бұрын

Most of Miniware are very good but this one looks useless. I have TS100 and TS80p and both can be powered from usb power banks and last forever not few minutes

@danytoob 11 ай бұрын

😉👍🖖

@icommandoi145 11 ай бұрын

super caps are awesome, several million cycles of charge and discharge vs a few thousand compared to a battery.

@071Rishi 11 ай бұрын

handle is bit big, otherwise it's great 😊

@DavidBenson-by4co 11 ай бұрын

you dirint put the right website

@jf5016 11 ай бұрын

Sorin, it’s $184 on Amazon? Ouch!

@masterliu1892 11 ай бұрын

a bit expensive

@matrixclone1403 11 ай бұрын

Holy $#!T, for $130.00 it should work great!

@masterliu1892 11 ай бұрын

I want to ask if it is made in China

@Adrian_Buliga 11 ай бұрын

O sa bagi toti nebunii la testat :))) sa vezi cate vizualizari o sa ai :)))))

@MrRvdbeek 11 ай бұрын

Nice review Just open and burn a wire 😂

@somewaresim 11 ай бұрын

Worryingly you don't seem to have a fume extractor Sorin......🤔

@NPOSK 11 ай бұрын

Too expensive to do the simple task Sorin.

@gregandark8571 11 ай бұрын

MiniWARE if you are reading,then know it! I'm waiting for your induction (13.56Mhz) soldering iron.

@ronlevin2339 11 ай бұрын

I do not like the long tip that it use

@fu1r4 11 ай бұрын

A complete package with 5 tips and a power supply will cost you around $300. That is way too much. It doesn't last for 7 minutes, it take 7 minutes to a full charge. I wonder how many seconds you can solder with it without putting it back in the charger, 60 seconds? Please do a test, so we can see how long time you can solder with it on one fully charge ...