SDG

Рет қаралды 9,728

Күн бұрын

PCBWay 3D Printing and Fabrication: www.pcbway.com/rapid-prototyp...
Miniware TS1C: www.miniware.com.cn/product/t...
TS1C on AliExpress: s.click.aliexpress.com/e/_DCs...
Picoscope 5000 Series: www.picotech.com/oscilloscope...
Support the Channel with Patreon: / sdgelectronics
----------------------------------------------------------------------------------------------------------------------
SolderKing UK Made Solder: solderking.com/
----------------------------------------------------------------------------------------------------------------------
SolderKing UK Made solder available at Kaisertech:
UK JBC Distributor kaisertech.co.uk/ Discount Code: "SDG5"
----------------------------------------------------------------------------------------------------------------------
0:00 Introduction
1:24 PCBWay
1:52 Cordless Handpiece
3:30 Bluetooth Cradle
5:31 Inside the Cradle
6:37 Inside the Handpiece
8:27 User Interface Walkthrough
10:35 Calibration Check
11:55 Soldering with the TS1C
13:35 Low Power!
14:50 Conclusions
----------------------------------------------------------------------------------------------------------------------
3D Printers:
Ender 3 S1 Pro on AliExpress: bit.ly/3Tfiz22
Geeetech Mizar S on AliExpress: bit.ly/3MN0c0M
Artillery Genius at Banggood: bit.ly/32iG2dv
Geeetech Mizar S on AliExpress: bit.ly/3MN0c0M
Geeetech A20M at Banggood: bit.ly/2YooVll
Geeetech A20M at AliExpress: bit.ly/3oBqo2I
Geeetech PLA+ Filament: amzn.to/3gelSX1
Ender 3 V2 at Banggood: bit.ly/36lN8Ny
Ender 3 V2 at AliExpress: bit.ly/3j1C2CO
-------------------------------------------------------------------------------------------------
Soldering Tools and Equipment:
Aixun T420D On AliExpress: bit.ly/3cQXXhh
Aixun T3B on Aliexpress: bit.ly/3CHerj1
Aixun T3B on Aliexpress: bit.ly/3cDkWIY
Aixun T3A on Aliexpress: bit.ly/30LDcgG
AiXun T3A on Aliexpress: bit.ly/2VdRVhU
Yihua 853A Preheater: www.banggood.com/custlink/DGD...
Youyue 946C Hotplate at Banggood: bit.ly/2MuLwqM
Youyue 946C on AliExpress: bit.ly/374v3Tp
Solder Paste: bit.ly/2E1P5jR
Solder Flux: bit.ly/2MQn7we
Quick 857DW+ Hot Air Station: bit.ly/2OWDvf4
T12 Soldering Station: www.banggood.com/custlink/3KK...
AC Version: www.banggood.com/custlink/3GK...
T12 Iron Tips: www.banggood.com/custlink/3DG...
Daniu Tip Cleaner: bit.ly/31VHwWM
KSGER T12-BCM3 Tip: bit.ly/2xgYXCQ
-------------------------------------------------------------------------------------------------
Microscope Equipment:
Eakins Barlow Lenses: bit.ly/3aBY5tR
Eakins Black Microscope: bit.ly/2VEcYaW
Eakins Camera Microscope: bit.ly/2x86hnT
Camera Adaptor for Microscopes: bit.ly/2KBZQMQ
Amscope Microscope Head (US): amzn.to/2YmZWNx
Amscope Trinocular Microscope (US): amzn.to/2YdBE8k
Amscope Trinocular Microscope (UK): amzn.to/2V8w9Gh
Swift SS41-WF20 Binocular Microscope US: amzn.to/2VLWEpb
Swift SS41-WF20 Binocular Microscope UK: amzn.to/2GYGYFV
Visit my website: www.sdgelectronics.co.uk/
-------------------------------------------------------------------------------------------------
#ElectronicsCreators

Пікірлер: 65

@sdgelectronics 11 ай бұрын

PCBWay 3D Printing and Fabrication: www.pcbway.com/rapid-prototyping/ Miniware TS1C: www.miniware.com.cn/product/ts1c-cordless-soldering-station/ TS1C on AliExpress: s.click.aliexpress.com/e/_DCs9d9X Picoscope 5000 Series: www.picotech.com/oscilloscope/5000/flexible-resolution-oscilloscope Support the Channel with Patreon: www.patreon.com/sdgelectronics

@ahmedmayh51 11 ай бұрын

Do you have a link for the magnetic pcb holder when soldering?

@DesertVox 11 ай бұрын

The electronics technicians hard at work in their workshops in the 1980s or 1990s could never have imagined of such a soldering iron.

@MWest-ry9gw 11 ай бұрын

❤

@bobweiram6321 11 ай бұрын

Miniware is the underwear of soldiering irons. You don't want to leave home without it.

@miniware 11 ай бұрын

Thank you!

@gregandark8571 10 ай бұрын

@@miniware We need a real soldering station from UniWare. We need something like a real induction soldering iron based on curie effect. A real induction system based on 13.56 Mhz from miniware would be very,very sweet. ♥♥♥

@TheEmbeddedHobbyist 11 ай бұрын

just when you thought that you had run out of soldering irons to review you found another. 🙂

@sdgelectronics 11 ай бұрын

There's 12 in the to do pile 👀

@IanScottJohnston 11 ай бұрын

I hear Steve has talked his wife into changing one of their spare rooms into a "Soldering Iron Stock Room".

@TheEmbeddedHobbyist 11 ай бұрын

@@IanScottJohnston The last time he turned them all on the lights dimmed here.🙂

@sonyx5332 11 ай бұрын

@@sdgelectronics I would love to see a review on the Japanese made [TAIYO GOOT RX-802AS]. 🤔

@DirkFedermann 11 ай бұрын

This plus a capable Powerbank and you are suited for almost everything. I like that they use a Super Capacitor instead of a battery, because the battery will probably fail after a couple of years - especially if you don't solder frequently.

@TradieTrev 11 ай бұрын

What a time to be alive! Mad iron!

@brianwood5220 11 ай бұрын

That's quite a capable little station you have there Steve. Something which I think I would have probably tried myself when I was first starting out as a hobbyist and looking at the price I think you're getting a lot for your money. Great review though, and thanks for sharing

@69uremum 11 ай бұрын

Its like the modern re-imagining of a iso-tip soldering iron.

@SlaVoy 11 ай бұрын

Cool design, I like it. Except for that flex PCB touching the supercapacitor. It's a pity they used TS80P tips instead of TS100. It lacks a bit of power for me.

@miniware 11 ай бұрын

Based on the internal resistance of the soldering iron tip and the size of the soldering iron tip, the TS80 series soldering iron tip is more suitable as a cordless soldering iron.

@gregandark8571 10 ай бұрын

@@miniware So what about a future curie induction soldering system? Are you working on it,because if yes,then i'm preparing to bring my wallet and buy it :) Thanks.

@miniware 10 ай бұрын

@@gregandark8571 Sorry, there is no technical reserve in this area.

@MichaelGiacomelli 11 ай бұрын

Can you walk across the room away from the base station and still solder? I could see this being really handy for in situ soldering of equipment, wire bundles, etc inside large equipment without having to rig up a soldering station and extension cord.

@HwAoRrDk 11 ай бұрын

Yes, good point. Does the handpiece continue to function if it loses communication with the base station? I could envisage this might occur if you take it away from the bench to solder something some distance away - e.g. outside, garage, etc. Steve, could you test this?

@hoggif 11 ай бұрын

Quite a different product. Seems good enough for small jobs. For portable work that has low advantage over USB-C PD iron with PD powerbank. Sure, a more compact but give an iron a 10000 to 20000mAh PD power bank and you have lot more power. I did not see a test if it works without a cradle or if you need usb power for it anyway for portable jobs.

@vincei4252 11 ай бұрын

I like the idea of no lithium battery. I guess this thing will last a lifetime if the software in the micro controllers flash doesn't let you down.

@sdgelectronics 11 ай бұрын

Not sure on the lifetime of supercapacitors. It should be far better than a lipo though

@teslatrooper 11 ай бұрын

50 000 cycles degradation

@TheNinsaa 11 ай бұрын

I like the design, the addition of screwed terminals for the supercap seems like replacing it is doable? How long can it solder before it needs to be charged again?

@sdgelectronics 11 ай бұрын

If it's fully discharged, around 2 minutes is enough. Yes I did think it is a good idea that it's replaceable, though I'm not sure what kind of lifetime to expect.

@Bigg0russ 11 ай бұрын

This is pretty cool but does it work away from the base station like 100 yards away does anyone know. Thanks

@petermoore9504 11 ай бұрын

Is the performance different when using a cable directly with the soldering iron? Especially with the high temp mass pcbs. Cheers

@sdgelectronics 11 ай бұрын

No different, just doesn't run flat!

@ImranAli-rp4kd 11 ай бұрын

I think the price is kind of ok but I think I’ll wait till one that accepts jbc tips comes out as you get a better tip selection, at the moment I just use one that connects to a powerbank and uses jbc tips, obviously that’s not my main iron as I got like 10 other stations including jbc, metcal, Hakko, weller, ersa and so on

@alexstone691 11 ай бұрын

They could've have put a barrel on back of the station too, hate being locked into "smart" psus

@cesarhoyos6955 5 ай бұрын

supercapacitor I finally see them in devices

@Galeere2 11 ай бұрын

Does it also charge the supercap through the USB port on the back of the handpiece?

@andymouse 11 ай бұрын

Yes.

@Gabriel-pf5pu 11 ай бұрын

Will you be reviewing the new Aixun H310D Hotair Station? I find the formfactor quite nice, but not sure about the price and the features. Would appreciate your insights on the product :)

@sdgelectronics 11 ай бұрын

Video will be early next week

@Gabriel-pf5pu 11 ай бұрын

@@sdgelectronics nice! Looking forward to it :)

@fir3w4lk3r 11 ай бұрын

Maybe a nice solution for automotive usage.

@Kosmonooit 11 ай бұрын

What would be the longevity of the supercap?

@jaro6985 11 ай бұрын

50,000+ cycles are claimed.

@electrodacus 11 ай бұрын

That is not a supercapacitor but a Lithium battery 2.5V to 4.2V range with 300mA capacity designed for high cycle life. The 750F capacitance is just the equivalent but it is not a capacitor. Cycle life seems to be around 50k cycles before capacity is at 70% of original. Not only that but there is also a calendar degradation and if stored fully charged will likely need to be replaced after 2 or 3 years.

@joshdau 11 ай бұрын

Show me a lithium-ion battery that only degrades to 70% capacity after 50,000 cycles...

@electrodacus 11 ай бұрын

@@joshdau They did not provide exact details of how those 50k cycles where made. This battery is in a 1840 size format and has only 300mA where a slightly larger 1865 can be found in 3000mA capacity so an order of magnitude larger capacity. If you take that 3000mA and only do 10% DOD cycles somewhere in the middle of the voltage range it can do 50k cycles with no problem. So this battery was optimized for cycle life to the detriment of energy density. Some other Lithium chemistry like LiFePO4 can do 500k cycles at 5% DOD. In any case my comment was about the fact that this has nothing to do with a super-capacitor. Super-capacitors have such a low energy density that it will not be worth to combine with a Lithium battery. Also super-capacitors are 2.5 - 2.7V so you will need two of them in series to parallel with a Lithium battery that charges to 4.2V. If they could have used a supercapacitor then it will have made this a product that could be used for decades with no problems but since it is a Lithium battery it will likely end in the landfill in about 5 years.

@jaro6985 11 ай бұрын

@@electrodacus Voltage drop is linear which makes it a supercap to me. LIC1840Q3R8757 "A lithium-ion capacitor (LIC or LiC) is a hybrid type of capacitor classified as a type of supercapacitor. It is called a hybrid because the anode is the same as those used in lithium-ion batteries and the cathode is the same as those used in supercapacitors"

@electrodacus 11 ай бұрын

@@jaro6985 What they show there (in the spec sheet) is a high discharge rate 1C and 2C and at those sort of discharge rates a Lithium battery will discharge fairly linearly as well. But a supercapacitor will not have that discharge curve shown in that manual. When half discharged a capacitor voltage will not be at half the voltage range but much higher voltage. This so called hybrid capacitor has a capacity of 1Wh and in same size 1840 you can buy a 60F 2.7V supercapacitor with just 0.06Wh. So if you want to build a hybrid supercap/battery then the capacitor part can not represent even 5% of the total. Hi energy density lithium cells have a flat charge discharge curve if you keep them in the recommended range typical 4.1 to 3.3V

@th3drizzl378 11 ай бұрын

i have a t12 i made with 18650's i take with me lasts a couple hours, you can actually buy a pre made psu board from ksger and others that is designed for 18650's this is okay but for the time you get to solder vs the time it takes to charge i just dont know if its worth it. also they should have went with 100 tips vs the 80 imo with these. but the 80 may have been easier to drive. imo they should have just went with a battery inside vs the cap. i wonder if one could change out the cap for a battery

@mrludicrous1670 8 ай бұрын

It would be better if it came with interchangeable capacitor

@acoustic61 11 ай бұрын

This is just a toy. And OLED displays are terrible. Not sure why Chinese companies think they need to use them in everything. Miniware should try making a bench station.

@wafu6058 11 ай бұрын

Wonder what sort of life span we can expect from something like this, as well as how long until we start seeing degraded performance?

@vincei4252 11 ай бұрын

Why do you think it'll degrade? Couldn't the same thing be said of something with a lithium battery ? It is a capacitor after all and I hazard a capacitor will survive many more cycles than any battery.

@sdgelectronics 11 ай бұрын

It should survive significantly longer than a LiPo cell, but supercapacitors do fail over time with increased ESR.

@wafu6058 11 ай бұрын

Well, these are CONSTANTLY cycling charges. If you cycled a lipo as many times as this.. it wouldn’t last long. These are probably going to start to degrade in a year of regular use imo, yes that’s longer than a lipo, but in the grand scheme of things it might not be practically long.. but time will tell as I can’t find much on this particular cap

@jaro6985 11 ай бұрын

@@wafu6058 Its right in the datasheet (LIC1840Q3R8757), 50,000 cycles at least. If you solder for 5mins from one cycle, thats like 170 days of continuous soldering, it wont degrade in a year.

@medienmond 5 ай бұрын

With 750 Farad the capacitor inside the soldering iron would hold as much energy as 10 (!! TEN !!) AA NiMh Batteries, exactly 26730.8 milliamperes houra. Even more unbekieveable that it should have double the voltage, compared to NiMh cells. In my calxulationn, i even did not take any voltage differential into account. Something is not quite right here... Maybe i just can not calxulate any more or something else here smells like fish!