Minn Kota Onboard Marine Chargers - Overview, Considerations and Benefits

Рет қаралды 37,217

2 жыл бұрын

This video breaks down the considerations and benefits of installing an onboard battery charger for your boat.
Subscribe for more Minn Kota How-to videos! bit.ly/35DiLAX
www.minnkotamotors.com

Пікірлер: 22

@brandenviens9248 4 ай бұрын

Can you show how to hook the trolling motor to the batteries? I have a 70/24/60 powerdrive

@user-yx7ig7iw8o 10 ай бұрын

What is the purpose of the temp sensors in the output cords?

@robc3869 2 жыл бұрын

How would you connect a minn kota alternator charger to a two bank onboard charger. Cranking battery is 12v and the trolling battery is 12v. Thanks

@Wayno228 Жыл бұрын

Do they make charging systems that charge your trolling motor batteries while running your big motor

@bradprescher5373 Жыл бұрын

Do they get paid extra by placing serial numbers in places where they cannot be read?

@brentyoungmann2732 Ай бұрын

Are you able to keep the wires connected at all times when you are using the boat and also when charging?

@jeffjucksch4975 2 жыл бұрын

Unless I'm missing something, you still have to remember to plug in the onboard charger.

@Wayno228 Жыл бұрын

That's my question for some reason I thought onboard battery chargers took the power from your big motor battery and transferred it to your trolling motor battery so everytime you ran your big motor it charged your other batteries because why else would an onboard chargers cost 300 plus dollars that you have to plug into an outlet

@plem7210 10 ай бұрын

@@Wayno228 late reply. There are some systems that do that. They’re called alternator chargers or dc to dc chargers. You normally are not running the main motor enough. To fully charge the trolling battery’s. With those systems. If you think about how many hours it takes to charge a battery. When it is plugged in. The cost of the onboard plug in chargers. Partly has to do with you are buying three or four chargers. That are built into the same case. They call each charger a bank. Depending how many battery’s you are charging at once. Plus it needs to be waterproof and vibration resistance. It is more convenient to plug in one three bank charger. Then using three portable chargers. That you have to hook up to the battery’s by hand every time. Plus these are smart chargers. Makes the battery’s last longer before replacement. Compared to the super cheap dumb portable chargers.

@coltonparrott7707 Жыл бұрын

Hey guys, I have a MK330PC (2-3yr old) and went to charge my batteries today and noticed bank 2 wasnt coming on. No lights anywhere or anything, the other banks, 1 & 3, are working perfectly fine. Fuses were checked and connections are good. I removed it from all batteries and unplugged it and let it sit for a couple hours then re-hooked it up and had the same issue. Any ideas on what would cause this? Or what i can do to potentially fix it?

@MinnKotaTutorials Жыл бұрын

Colton Parrott, If you are getting no lights on bank two, that bank has gone out and is bad. The chargers have a 3 year warranty from date of purchase to the original purchaser. If you are the original purchaser and are within the 3 year warranty window, you can call Customer Service at 800-227-6433. They will need a serial number off the charger and a copy of your proof of purchase. Once they have that information they will set up a replacement charger. Best Regards.

@bradprescher5373 Жыл бұрын

Thanks for making the chargers non repairable

@j.christopherhickman2060 11 ай бұрын

I have a 4 bank 480 perfusion minkota charger .two banks are blinking and two are solid . What does that mean please ?

@MinnKotaTutorials 11 ай бұрын

Thank you for contacting Minn Kota. What color are the lights that are blinking?

@danieldipeppe1455 Жыл бұрын

I'm getting a flashing gree on my lead acid battery and a steady green on my 2 trolling motor agm is that normal

@MinnKotaTutorials Жыл бұрын

Hello Daniel, Yes, both indications on the battery charger are normal. Flashing green indicates the battery is fully charged and the charger is in maintenance mode, outputting at low amperage to keep the battery topped off. A solid green light also indicates the battery is fully charged, but is in standby mode. It is not outputting, but is monitoring the battery and will start charging should the voltage drop below 12.6 volts. Regards, Mike N.