Chemical dipping a classic Porsche 356 to remove all the paint and rust prior to a restoration

Рет қаралды 867,401

Жыл бұрын

Getting this Porsche 356 down to bare metal prior to a high end restoration. This car was sent to us by translog for Porsche and ryan kraws owner of‪@CrucibleCoachworks‬.
Make sure you check out Ryan’s page he does amazing work!
Unfortunately I lost the video of pulling this Porsche out of the chemical, but the awesome pressure washing made up for it!
For quotes and scheduling -3schemicalsllc.com
To contact me for social media purposes- trevormalloy2121@gmail.com
#porsche #porsche356 #rustremoval #paintremoval #restoration #clean #oddlysatisfying #satisfying #pressurewashing #powerwashing #classiccars #paint

Пікірлер: 168

@tonyseverance7321 Жыл бұрын

I love watching these chemical dip videos because the dip exposes the scars from the car's past and sets the table for the rest of the car's life via the restoration it is about to go through.

@BlindTom61 Жыл бұрын

Watching these videos gets addictive...

@minute_of_dangle Жыл бұрын

I’m glad you enjoy them!

@loganshotrod4x464 Жыл бұрын

As a man who loves old cars & has worked on them for most of my adult life; I have tremendous respect for the work you do. I got nauseous when I saw the patch work on that drivers side fender… that was probably a pleasant surprise.

@TheDasbull Жыл бұрын

When I saw it was a 356, I knew it would take multiple soaks. I removed 80 pounds of that sound deadening years ago from a Super 90 coupe (by hand 😩). Surprised there was that much car left after treatment - these became lightweight racers all on their own 😁

@chrisplace3024 Жыл бұрын

This never gets old

@minute_of_dangle Жыл бұрын

Thanks!

@gcruishank9663 Жыл бұрын

Boy, wish I could’ve started that way with the 67’ Camaro I built from the ground up when I was a teenager. Bought it in 76, no engine or tranny, rusted out like crazy. But I finally got it on the road after 4 years of scraping together money for every part, and endless hours in our garage. 350 LT1, Turbo 400 tranny, 3.51 posi rear end, yellow with back stripe around the hideaway RS grille. Wasn’t perfect but the experience was worth every penny.

@davidbbo15n Жыл бұрын

please do more dips as your videos are awesome, we need more dips so we can share. keep them coming.

@davidduro974 Жыл бұрын

Great Job

@joelpierce3940 Жыл бұрын

This is the way to start fresh. Wish I could do my 69 Chevelle. And I know it’s history, having owned it since 1972.

@tonybino01 Жыл бұрын

Chevrolet cars are the best. I turn deaf when Ford fans disagree.

@franic_scopes9165 Жыл бұрын

@@tonybino01 I’ve had several Fisher body cars over the years but my favorite was my 71’ Chevelle wagon. You could get 5 full-size guys, 3 dogs, a dozen or so rifles, lunch, and enough ammo to last a week in that thing with room to spare. Of course I put a big block in it and it got terrible gas mileage but I dare say it was the best car I ever owned.

@joelpierce3940 Жыл бұрын

@@franic_scopes9165 I have been thinking it would be great to have a late 60’s Chevelle Wagon. Perfect size. Drop an LS in it and go for good mileage. Totally reliable.

@franic_scopes9165 Жыл бұрын

@@joelpierce3940 Chevelle wagons are great cars and I would absolutely recommend one but the only thing is finding one.

@TheJcman72 Жыл бұрын

This ones really shows that a nice paint might hide a lot of s... Great job!

@Anne6621 Жыл бұрын

like they say , Putty and Paint Makes Pretty What Ain't !!

@byronspears9395 Жыл бұрын

Jack Nicholson “Joker” reference 🫡

@jerryneff6018 Жыл бұрын

Beautiful car

@jeffreylescoe5624 Жыл бұрын

Why is this so satisfying to me

@Animalhouser Жыл бұрын

Please do more longer videos like these 🙏🏾💯🙏🏾💯🙏🏾

@Frankd22003 Жыл бұрын

So addicted to watch the pressure washer doing its job.

@minute_of_dangle Жыл бұрын

I’m glad you enjoy it!

@PoorMansChemist Жыл бұрын

Maybe I missed it but what chems is it being dipped in?

@cafesociety8525 Жыл бұрын

"Not a lot going on here in the trunk area" he says to the engine bay... Lol

@rodrigommaiochi9226 Жыл бұрын

Impressionante muito bom 🇧🇷

@MAXlMUS66 Жыл бұрын

Satisfying

@TheTopG420 Жыл бұрын

You have a satisfying job

@minute_of_dangle Жыл бұрын

Thank you! I enjoy it!

@bayelrey8028 Жыл бұрын

That car shell looks BEAT 😂

@briandailey7274 Жыл бұрын

I'm a body man and I have to say what's nice is to know that these cars are going to go and be repaired back to mint condition cuz when you go do this much work you go all the way. Awesome job I wish I was there I love doing that my OCD is ridiculous LOL

@drifter9425 Жыл бұрын

I've got 40yrs as body man and can say I've seen the results of trapped acid between all pinch welds and cavities the pressure washer won't reach and all protection is gone with acid residue left with bare metal only to rust and corrode further I've seen it leach out of the fender pinch welds and creep under paint job TOTALLY ruins the car That Porsche had great factory undercoating and was dipped in paint after assembly from factory so you basically ruined the car for long term VERY SAD to see

@briandailey7274 Жыл бұрын

@@drifter9425 it's all in the after work. I already thought of that and I would have a hot beeswax that I would spray in there and not worry about it. But I'm sure you knew that after forty years of Auto body. Body man are all different

@PreservationEnthusiast Жыл бұрын

@@drifter9425 Yeah you are correct. They may be able to sell it on at a profit, but 5 or 10 years down the line when the "guarantees" have run out, the rust can creep out from the depths of the seams fuelled by all the chemicals and acid left in there. Factory underseal and treatment in the crevices destroyed by this acid dip. 10 years down the line some poor customer is going to have to pick up the tab. When cars are too far gone with deep rust, far better to remove parts and sell those, chop up the body shell and weigh in the scrap. It's much fairer on people down the line who will pay good money for a rust time bomb.

@pbe6965 Жыл бұрын

@@drifter9425 it's been neutralized in the next bath so there shouldn't be any acid left anywhere. I don't know about the neutralizing bath though, since it seems they might use the same alcali bath than the paint removal it might attack any paint or primer they put on afterwards.

@drifter9425 Жыл бұрын

@@pbe6965 Even if all the acid is gone there is bare metal between every pinch weld and subframe cavities lots of which cannot be reached to coat with anything. Unless you can dip the car in paint like the factory does it's way better to blast with walnut shells....soda blasting has it's issues too

@danijuggernaut Жыл бұрын

I like this channel, it is the absolute radical rust corrosion exterminator. Last week i dipped my motorcycle air filter box in muriatic acid, excellent result.

@cliveturner4980 Жыл бұрын

how would you protect the areas you cant get at from rusting once all paint has been removed eg inner sills ,inner wings etc ?????

@captainover-tighten6729 Жыл бұрын

Hi, really enjoy the videos. How many tanks do you have? How many cars go though in a week? Thanks

@Laguna2013 Жыл бұрын

are there any areas that you can not access that may trap the dip liquid? I have heard of this happening where you never get it fully dried out....

@marijoyferreira4291 Жыл бұрын

EXELENTE limpieza de extraer la pintura

@jamesfreeland3137 Жыл бұрын

Wow! It really is amazing how all of djunk comes off of these cars. It sure is dirty. I'm from Berlin, Germany and I saw a new system from some guy in Holland that bakes the car. Really interesting. You should check it out. Good job. What a mess.😊

@there_is_nothing_here Жыл бұрын

That poor thing has led a rough life. It's in desperate need of a body man who's not heavily reliant on Bondo. I think if it was me I would nickname that car Patchwork 😄

@minute_of_dangle Жыл бұрын

Lol

@rogeriohellebrandt1071 Жыл бұрын

Por quantos processos ele passa. E quanto tempo ele fica em cada tanque??

@janskibinski6847 Жыл бұрын

with dipping, doesn't dipping acid remain in all closed seams? Residual acid is not possible to fully remove and will eventually eat through metal in closed seams as in rain gutter , front trunk margins, engine trunk areas, etc. My question is based from bitter experience of a rare "acid dipped" 356 Porsche.

@D3nn1s Жыл бұрын

Idk but on the 2nd video, an engine block, they showed how they neutralize it and dip it in rust inhibitor before sending it to the customer. I guess its all a question if you want to have a proper restauration or a cheap one that looks good on the surface

@JohnThreeSixteen918 Жыл бұрын

That moment of discovery when the paint comes off and the formerly hidden repair work patches start to show...

@rickden8362 Жыл бұрын

Can this type of dipping be used to lighted the chassis/bodywork?

@rightwinger1505 Жыл бұрын

How long between dips, and how long do you dip em?

@mikepayton4908 Жыл бұрын

Cool

@minute_of_dangle Жыл бұрын

Thanks

@efgeebe Жыл бұрын

How do you remove the chemical from between spot welded panels etc, and treat those areas to prevent rust?

@maintayne Жыл бұрын

Something I've always worried about

@user-ov3rw1db7w Жыл бұрын

We have only Sandpaper , so we like to say ; This Man are sooo leasy ;)) Sunshiny Greatings to You + 555

@momentsintimess Жыл бұрын

what kind of solutions are in the containers where the cars are immersed ???

@Wild-Dad Жыл бұрын

That body looks like its had lots of repairs in the past!

@minute_of_dangle Жыл бұрын

Definitely! It was pretty beat

@TheDasbull Жыл бұрын

These 356's are fragile - one bump and it really puts the hurt on them. Still one of my favorites though!

@Destiny_S_Bitch Жыл бұрын

Can you explain to me a little bit how many steps are there? I also want to start an industry

@craigforbes4636 Жыл бұрын

I'm sure Jerry Seinfeld will watch this...

@Termo_star Жыл бұрын

🛠️👍👍

@louislamboley9167 Жыл бұрын

Amazing what some Bondo and paint can hide. Cute little cars. Fun to drive. Flimsy and cheaply built.

@JohnThreeSixteen918 Жыл бұрын

So how long after the last acid dip before you can start applying the new paint? Does acid residue not affect the repainting process?

@allareasindex7984 Жыл бұрын

The acid is neutralized by dipping into a base (alkaline) solution. Otherwise, yes the primer and paint wouldn’t stand a chance.

@AnimeSunglasses Жыл бұрын

There's a STORY behind that barely-welded repair, I kinda wish we could hear it...

@kwasiorek Жыл бұрын

What mixture is in that Bath?

@RaphaelDawkinsCombatRadio Жыл бұрын

I misread this as Chemical Dipping a plastic Porche. I was confused for a moment 😳

@ReaperRestorations Жыл бұрын

i get this goes on instagram too, but you're killing me with filming in portrait!!

@Seemsayin Жыл бұрын

Why? Everything can be seen, crystal clear. And he was nice enough to upload it. What difference does it make? I didn't reply to give you a hard time. Just wondering why you feel it's killing you.

@bpalpha Жыл бұрын

Is it true you'll turn into the Joker if you fall into one of these chemical baths? 😉😆

@bnnusa58 Жыл бұрын

How did you get in to this line of work? It’s really interesting.

@moniquemalloy8644 Жыл бұрын

Business close to his home…

@mountainboyoakley3119 Жыл бұрын

The Acid wash is for the true restoration,

@griopfrew3260 Жыл бұрын

Very very good, but what about the underside of the floor???

@tstahler5420 Жыл бұрын

How often do those tanks get drained and refilled? Or do they get filtered and topped off? What's the largest vehicle you can accommodate? Oh and what was that red stuff that looked like blood that showed up during the spraying?

@minute_of_dangle Жыл бұрын

We can spike them so the one big alkaline tank was going strong for about 4 years. Acid lasts about two to three years. 17.5’x6.5’. The color comes from the neutralization of the acid. Kinda turns a rust color

@TheDasbull Жыл бұрын

The brief flash of red you saw was "spot putty" from previous body work 😉

@Grisa77 Жыл бұрын

Ugh after the first dip i was like "now let's dip it in something that dissolves it all"... :(

@gwcrispi Жыл бұрын

Where does that floor drain drain to?

@matthewvaillancourt9503 Жыл бұрын

What stop's it from rusting throughout all of them seams, where you can't get access to? Definitely the way to go if you can coat those areas

@minute_of_dangle Жыл бұрын

A lot of customers get them primer dipped or E coated afterwards. Others cut access to certain areas. Spray all cavities and seams with a rust converter that leaves a phosphate coating that protects the metal and is safe to paint over. Then epoxy prime and finish all spot welds and seams with cavity wax

@aprildangelo7457 Жыл бұрын

Go on you tube Dominic Chinea 356 he's doing, if you want to see rust.

@franciscodominguez6916 Жыл бұрын

where are you located at? Would like to bring one

@michaelfuller2153 Жыл бұрын

Does anyone do paint dipping? Isn't that how the factory does it? Or perhaps just primer.

@jjg7696 Жыл бұрын

Bro, make sure you wear a respirator. That steam contains the chemical as vapor...

@1966jcar Жыл бұрын

What do you do when you have to deal with lead filler on the cars

@minute_of_dangle Жыл бұрын

Unfortunately we can’t remove the lead filler. Lead is to inert and our chemicals won’t go after it.

@comunismonao 23 күн бұрын

Muito foda!

@KG72 9 ай бұрын

No Karmann ghia?

@TommiLipponen Жыл бұрын

I find it hard to believe that it had original paint on when dipped. Look more like some modern water based paint.

@ubute Жыл бұрын

Kinda like watching the paint dry in reverse.

@minute_of_dangle Жыл бұрын

A little more entertaining though I hope lol

@patrickhayes3099 Жыл бұрын

Dip doesn't dissolve the paint, rather it breaks bond with the steel, I I'm understanding this correctly, yes?

@bentickner1 Жыл бұрын

I love all the " I have been a body shop owner for 327 years. The acid will leak out onto your paint job" comments. I think if you go to all the trouble to dip and then neutralize a car. There is a good chance they will take the time to properly refinish it. Is there a way to dip the car in primer?

@Teeveepicksures Жыл бұрын

that's one pricey german tub

@ohmightyzeus6135 Жыл бұрын

Ah, today's meditation video has arrived.

@minute_of_dangle Жыл бұрын

❤❤❤

@crazydim123 Жыл бұрын

Местами даже кровь идёт=)

@mrlox9576 Жыл бұрын

Hi, I was wondering what happens with areas where the acid has done its job to loosen paint up, but the pressure washer has missed or can't get to, and can't be painted without the body being dipped in paint. I mean, half removed acic affected paint is still tucked away in those spots and will need to be thoroughly cleaned before anyone even thinks about priming or painting ? Won't those spots be a high-risk factor for future rust, especially if any acid is trapped in there? These questions just come to mind as i watch the dips and see the liquid getting into places I think the water blaster/paint gun would struggle. Otherwise, entertaining vids. 👍

@isaakwelch3451 Жыл бұрын

That's what the neutralizing soak is for. And remember, hidden spots likely didn't get painted from the factory either

@martinvs6415 Жыл бұрын

Surprised to see how it was patched together piece by piece.

@dimitristripakis7364 Жыл бұрын

Doesn't the acid eat away the rest of the car, that the water can not reach?

@rosewood1 Жыл бұрын

No amateur would repair their Porsche that badly. You just wouldn't do it. But a cheap professional might. Because they just want your money. Definitely going this route with my next restoration project.

@VishalSharma-tc7ks Жыл бұрын

Which chemical is used to remove paint , From India...👍

@Panelman-wx8fo Жыл бұрын

I wish my truck would fit in those tanks!

@minute_of_dangle Жыл бұрын

How big is it?

@annl520 Жыл бұрын

I bet I can do that with my hair dryeri🤯

@franklangone712 Жыл бұрын

What does this service cost?

@minute_of_dangle Жыл бұрын

@user-mg9gw4ir2m Жыл бұрын

Прошу прощения,но процедура аналогична смыванию косметики с потасканной жизнью дамы....да простит меня данный Порш! Он как раз таки хорошо сохранился,несмотря на солидный возраст.

@TheWinstn60 Жыл бұрын

If it didn’t have bracing it would just collapse how dangerous this would be on the road

@halfazzini3791 Жыл бұрын

Great videos but they need to be done in landscape mode.

@minute_of_dangle Жыл бұрын

All newer videos will be. These were shot for the other platforms before I started KZfaq

@kirbyroad7222 Жыл бұрын

Not a straight panel on that thing. Makes me wonder how many bondo wagons with a Porsche badge are on the road. That thing is rough.

@gerardoarbelo9784 Жыл бұрын

What the cost to do this car

@minute_of_dangle Жыл бұрын

@EarlyIronAddict427 Жыл бұрын

I have a 1957 Chevy 150 2 door sedan. Would it be same cost ?

@EarlyIronAddict427 Жыл бұрын

Loves this stuff. New subscriber 👍🏻✌🏻

@stealth117chen8 Жыл бұрын

Only pure accid ❓ other chemical is needed . Thanks 👍

@jackschmidt6157 Жыл бұрын

Where are you located

@minute_of_dangle Жыл бұрын

Nanty glo Pennsylvania

@vicbauwens Жыл бұрын

No hiding for the filler

@Wild-Dad Жыл бұрын

That is strange that there are all those holes drilled somewhat in a line in that one section in front ofvthe windshield.

@minute_of_dangle Жыл бұрын

I’m guessing they pulled out a significant dent there. Definitely in a weird area

@TheDasbull Жыл бұрын

Front end collision in the distant past. Cowl area "kinks" when these hit something 😱

@malekodesouza7255 Жыл бұрын

Looks like the same patch repair on both front quarter panels. Interesting. Was the entire front clip damaged and replaced? Sh the mystery of old cars…

@minute_of_dangle Жыл бұрын

I’m not sure. This is probably the 4th 356 I’ve done and every one has had awful patches and a ton of bondo in the same areas lol

@malekodesouza7255 Жыл бұрын

@@minute_of_dangle interesting. Perhaps that’s “factory” for the late 50s early 60s Porsches.🤷🏻

@TheDasbull Жыл бұрын

The area just in front of the doors on 356 Porsche's tend to rust badly. This area was heavily filled with lead from the factory and once it rusted through "body shops" did what you saw here - this wasn't quality workmanship...

@christopherdoney5232 Жыл бұрын

Poor car was beat from one end to the other

@SandeepSingh-ew9vs Жыл бұрын

I KNOW HOW TO MAKE DERUSTING AND PRETRATMENT CHEMICALS IF YOU HAVE JOB FOR ME PLEASE

@williamarnts9417 Жыл бұрын

Where does all the waste materials go?

@minute_of_dangle Жыл бұрын

We have a pit under the washbay that’s separate from our sewer drainage. The runoff is collected there. We then pump it out into evaporation tanks that have heat exchangers to evaporate all the water out of it. What’s left is a neutral sludge. We then pay a company who specializes in chemical waste disposal to dispose of it properly for us.

@pope1089 Жыл бұрын

You missed abit

@thomasbossman Жыл бұрын

Show us the undercarriage in the next video 🙂

@minute_of_dangle Жыл бұрын

I’ll try lol it get super wet

@thomasbossman Жыл бұрын

@@minute_of_dangle I understand sir

@Motor-City-Mike Жыл бұрын

Another one gets a bath... like the rest

@muratylmaz7297 Жыл бұрын

Dostum, nekadar uğraşırsan uğraşsan bile faydası yok Sonuçta metal yorgunluğu diye bir şey var ve en ufak bir trafik kazasında teneke gibi parçalanacak