REBUILDING A BMW AIRHEAD ENGINE IN 30MINUTES

Рет қаралды 666,718

Күн бұрын

In the last year, I meticulously disassembled, cleaned, and diagnosed the classic BMW R60/5 airhead engine from a 1970s motorcycle, embarking on a journey to restore it to its former brilliance.
Throughout the process, I repaired numerous internal components, ensuring their optimal condition for seamless reassembly.
Given the odometer reading of well over 90'000 miles on the original engine, an extensive rebuild became a necessity to revive this vintage masterpiece.
Join me in the fascinating restoration of this iconic motorcycle, where every part tells a story of its enduring legacy on the road.
⬇️Get your poster HERE⬇️
workshoprebuild.com/products/...
________________________________________________________________________
Click here to watch the disassembly video: • BMW R60/5 Airhead Engi...
________________________________________________________________________
BMW Airhead Parts Source: www.euromotoelectrics.com/
________________________________________________________________________
Similar Motorcycles: BMW R50/5, BMW R60/5, BMW R75/5. BMW R60/6, BMW R75/6, BMW R75/5, BMW R100/7
Follow Me:
/ workshoprebuild
tiktok.com/@workshoprebuild?l...
E-Mail: Workshoprebuild@gmail.com
Music: share.epidemicsound.com/v6woxm
#bmwmotorrad #enginerebuild #restoration
Timestamps:
00:00 Crankshaft Install
01:53 Camshaft Install
02:48 Lubrication System - Oil Pump
05:50 Crankshaft Timing Gear
06:48 Timing Chain
08:59 Timing Cover
11:35 Connecting Rods
14:03 Engine Studs
15:06 Pistons and Cylinders
18:56 Cylinder Heads
22:28 Rocker Arms
23:35 Cylinder Head Torque
25:06 Valve Covers
25:40 Exhaust Nuts
26:05 Engine Electrical
27:13 Starter Motor
28:21 Engine Identification Badge
28:48 Restored BMW Airhead Engine

Пікірлер: 583

@WorkshopRebuild 4 ай бұрын

Loving the feedback! Also: You can get your own airhead poster here: workshoprebuild.com/products/5-airhead-engine-poster-1

@CrazyGoat-iy1qi 2 ай бұрын

Y ese motor, para que sirve y cómo funciona?

@herbtender910 29 күн бұрын

The print shows the cylinders staggered, Great job.

@WorkshopRebuild 27 күн бұрын

This engine features staggered cylinders and the blueprint highlights it well. The blueprint is a factory drawing from 1968 and it showcases an R75 which is a 750cc engine. Thanks for your feedback!😃👍🏼

@oldleatherhandsfriends4053 Ай бұрын

Those WW2 engineers really carried BMW into the 90's. That engine is beautiful and you can see the quality.

@WorkshopRebuild Ай бұрын

You are right! They left behind some great technology and great manufacturing methods. There were numerous changes that took place between ~1960’s and 1995. I will share more details in an upcoming video series😃👍🏼 Regards Andreas

@josemendes9593 Ай бұрын

Parabéns pelo vídeo. Amei 🤩.

@WorkshopRebuild Ай бұрын

Thank you😊

@popsfitch7938 Ай бұрын

As a retired Dealership Harley-Davidson mechanic (not a damn technician) with over 55 years of service and repair under my belt it is wonderful to see young people doing work with the attention to detail as I have seen you preform on this engine. Nicely done. I wish there were more young people such as yourself in the shops in my years. With work ethic such as yours I know you enjoy doing it for year to come. I hope only the very best for you. God bless, Most Sincerely, Pops

@SubROVworld. Ай бұрын

Im doing all my engine work, slow and thoroughly, but the maddafackas bossing around with me hates it, ive never got a complaint from any customer yet though 😊. I love doing my absolute best, every time and i take pride in learning from the elderly (or youngsters) who is proud, quality minded mechanics that do their best eeeeevery time doing engine work. It is the absolute best feeling, to deliver a piece of work, that you just know, wil last a very long time and perform the same or even better than a new engine if taken care of proper.

@murraycharters6102 Ай бұрын

⁠@@SubROVworld.Ignore that idiot of a boss, he is only focused on money. Your approach is the correct one, which will reward you handsomely during your career. Job satisfaction is even more important than money.

@JuanMaldonado-ik8lg 12 күн бұрын

Agree with people doing things the right way. Those engines last forever. There was one BMW motorcycle in Colorad with over 750,000 miles. That was back in the 80s.

@stigbengtsson7026 4 ай бұрын

Looks like all the parts were 100% new ones 😎

@WorkshopRebuild 4 ай бұрын

Many parts needed to be replaced after 50years of use, and that’s why many parts look new. Major components were refurbished/repaired in order to be able to reuse them for this engine build. I will have a few more videos about this engine where you will see what exactly went into this engine. Thanks for watching! Regards Andreas

@hbviceroy7274 3 ай бұрын

That was absolutely meticulous……… well done Sir….

@WorkshopRebuild 3 ай бұрын

Thank you for your kind words, it's much appreciated! Regards Andreas

@shoutykat 2 ай бұрын

I've always thought that these are some of the most beautiful engines of any kind and I'm not even a bike rider. Just gorgeous!

@WorkshopRebuild 2 ай бұрын

Thank you for sharing your thoughts! I fully agree with you on this...there is just something that makes these engine so beautiful. The castings, maybe the boxer layout, the simplistic appearance...it's hard to say! Thanks for tuning in to watch this video and leaving a comment. Regards Andreas

@JuanMaldonado-ik8lg 12 күн бұрын

@WorkshopRebuild. where are you located?

@ashitmistry6120 2 ай бұрын

Beautiful..... It's like watching an artist creating a masterpiece. Therapeutic..... Precision Meticulous. More videos please.👍🏻

@WorkshopRebuild 2 ай бұрын

Thank you for this comment! I’m glad you enjoyed it and I will definitely continue to share more videos like this in the near future. Regards Andreas😃

@jamesgeorge4874 2 ай бұрын

Double row timing chain with a master link is so vintage German style.

@WorkshopRebuild 2 ай бұрын

The engine models from the late 60’s featured timing gears and just a few years after this engine, they went away from a double row timing chain and installed a single row timing chain. It’s always interesting to see how slight improvements were made over the years. Some which were better than others😉 Thank you for your comment! Regards Andreas

@traebbeRT 2 ай бұрын

@@WorkshopRebuild Single row timing chain and black airfilterbox from MY82. Up to MY82 there has been a double row chain in all engines exept the R45/R65 and the round alu-cased airfilter. In the 1000cc with 24 holes in the box, that's the best sound ever. I ride a '79 R100RT...

@Gwlyddyn 2 ай бұрын

One of the best engines ever made. Also it's very beautiful!

@WorkshopRebuild 2 ай бұрын

I can agree with you on that! Thanks for your support!😃🤟🏻 Regards Andreas

@ArneChristianRosenfeldt 2 ай бұрын

German over engineering with so many seals and precision fits. I rather look at US engines…

@carlthor91 2 ай бұрын

@@ArneChristianRosenfeldtNope, simple, and really reliable. I owned 3, plus 3 Harley's.

@user-dq4jk2dd3d Ай бұрын

Smooth quietly better than Harley Davidson.

@user-dq4jk2dd3d Ай бұрын

@@ArneChristianRosenfeldtoversure overprotective theirs attitude.

@Matthew-sc1 4 ай бұрын

You had my full attention for the full 30 minutes! What an absolute masterpiece you put together and the way you kept everything so clean was incredible. I love watching your videos!! Can't wait to see the next one

@WorkshopRebuild 4 ай бұрын

Thank for sticking around until the end Matthew! I will continue to share more videos about this engine and other aspects of the BMW motorcycle build. Thanks again and see ya soon

@Mariano.Bernacki 2 ай бұрын

I especially like how you showcase that an engine is a precision machine. Strength does not equal a lack of finesse.

@WorkshopRebuild 2 ай бұрын

Thanks a lot Mariano! Despite the overall simplicity of this engine, the internals are a work of art. There are many parts that need attention and I did my best to showcase this in the video. Thanks for mentioning this and leaving a comment! Regards Andreas

@user-hp6xk7dg3b Ай бұрын

BMW had designed an excellent engine, and you did colossal work when you were restoring it.

@WorkshopRebuild Ай бұрын

I fully agree with you! Thank you for your kind words and thanks for leaving a comment! Regards Andreas

@bendenisereedy7865 Күн бұрын

Zen and The Art indeed! You have a true mechanic's feel for the metals.

@maxenielsen 2 ай бұрын

VW divided by two. Seriously, a thoughtfully designed engine. Thanks for the great video!

@WorkshopRebuild 2 ай бұрын

That’s pretty much how you can look at this engine😁👍🏻 I agree this engine was very well designed on the inside and the engineers somehow made it look simplistic on the outside. Thank YOU for tuning in to watch this video and leaving a great comment! Cheers - Andreas

@josephstuhlreyer7972 Ай бұрын

...or the 911 x 3 - pushrods 🏍

@douglasfortin9711 2 ай бұрын

Nice to see someone who knows how to use a torque wrench!

@WorkshopRebuild 2 ай бұрын

Thanks a lot! Regards Andreas

@paultinwell5557 2 ай бұрын

An excellent job, thank you! It's a refreshing change to see every screw being installed without the aid of some sort of power tool or other.

@WorkshopRebuild 2 ай бұрын

I appreciate your kind words greatly! I rarely use an impact gun, and when I do, it's solely for nuts and bolts measuring 3/4 inches (19mm) and larger. This engine contains numerous M6 and M8 bolts that directly thread into aluminum. I prefer not to risk using an impact gun on them, as stripping the threads could lead to a challenging day, to say the least! Thanks once more! Regards Andreas

@chadstrohmayer541 2 ай бұрын

I don't know which is better quality the video itself or the assembly of the engine !

@WorkshopRebuild 2 ай бұрын

Thank you so much, I appreciate your comment! I believe this is still up for debate😃👍🏼

@andersf5464 2 ай бұрын

After serious consideration, I'll go for the assembly. But it's a close call.

@archerten Ай бұрын

Such elegance at work! I've had 6 airheads over 40 years, including two R65's. Definitely something to appreciate from a better understanding! Thank you

@WorkshopRebuild Ай бұрын

Thank you for watching and leaving a comment! You have had quite the collection over the years and the R65's already featured a few upgrades from the early 70's model Airheads. Since you had two R65's, were they your favourite bikes? Regards Andreas

@archerten Ай бұрын

@@WorkshopRebuild The R65s were very good smaller bikes and among my favorites. R100GS was a great bike too. Now ride R9T Urban GS, which is very good. This video that you made is very well done and real credit to you.

@user-yc4dk2tw3h 4 күн бұрын

Смотрел с бтльшим интересом, спасибо... мне 78 лет, у меня было 2 БМВ, Ирбит...❤❤❤👍👍👍🏋‍♀️🛵

@grandmagrandpasbucketlist 4 ай бұрын

Well done, Andreas, I like your attention to detail, from, “what looks the vapor blasting of each piece”, and finished with what I am guessing is a Cerakote, to your “special” assembly tools, the initial assembly lubrication and temporary plugs, all these are signs of a good artisan. Given the age of the motor, I am amazed at the perfect condition of the thread on the aluminum head exhaust port. My 2c, as a firm believer in “copper slip grease”, I used to use that on the aluminum exhaust nut to aluminum head thread, as well as on the spark plug thread.

@WorkshopRebuild 4 ай бұрын

Your comment means a lot to me and it also keeps me going! You mentioned every step from the preparation to the final result, which means you have been watching many videos. Thank you for your support!! The cylinder head threads were not reconditioned whatsoever, just cleaned and prepped for the coating. I was actually impressed by the condition, because many airhead owners have to build them up with weld and recut them! I fully agree with you about copper slip grease (copper coating). This should be applied to all fasteners along the exhaust system, including the exhaust nuts. I will be doing this once I install a brand new exhaust system to this bike. Have a fantastic day and I hope to see you in 2024. All the best - Regards Andreas

@gaelBM 2 ай бұрын

Beautiful job! At 9'40, I'm sure to see the blind plug in the oil canal between front and rear main bearing. If it is not here, you'll don't have oil pressure. 😉

@WorkshopRebuild 2 ай бұрын

Thank you very much! Don’t worry, the original flat-head oil plug screw has been replaced with a black oxide set screw. You can see it in place around minute 7:50! Thank you for your concerns😊👍🏼👍🏼 Regards Andreas

@salcurcio2791 12 күн бұрын

Has to be the cleanest engine build ever shown. Great job!

@rvanderw998 4 ай бұрын

What a immensely satisfying conclusion to this wonderful engine project!

@WorkshopRebuild 4 ай бұрын

Thank you very much for your overly positive comment! I had a great time rebuilding this engine. Thank you for tuning in to watch this video😊👍🏽

@gsxrsquid 19 күн бұрын

The older technology reminded me of rebuilding Nortons. I wish I had that nice fixture then!. Very nicely done. Everything clean and meticulous.

@WorkshopRebuild 14 күн бұрын

Oh yes, the old Nortons are wonderful machines! This fixture is completely custom made, but it did take some time to make. It will definitely come in handy for future projects😎👍🏼 Thank you for watching and leaving such a great comment. Regards Andreas

@whatsnextgarage 4 ай бұрын

Ok Andreas, what an awesome assembly! I can't believe how detailed and dialed in you have that system! Well done I watched the entire thing with a look of awe on my face! Happy New year and great success to you in the future!

@WorkshopRebuild 4 ай бұрын

I’m glad you enjoyed this detailed engine assembly video, David! Thank you for watching until the end and I hope you liked the final results😊 On the same note, I want to wish you a Happy New Year and all the best in 2024. I will continue to support your channel and want to see you grow as a creator! Keep it up buddy😎🤙🏽

@sagnhill Ай бұрын

I always wanted one of these bikes back in the day. I always thought it was so modern looking.

@WorkshopRebuild Ай бұрын

It’s never too late to get into this hobby😊👍🏼

@Gc-nm9kd 2 ай бұрын

This is gold! I would add torque specs - tool naming - and do's and dont's of steps. Amazing work!

@WorkshopRebuild 2 ай бұрын

Thank you for your comment, it‘s much appreciated! I‘ve created a separate assembly video that focuses on the „How-To“ part of this BMW Airhead engine assembly. In that video, I also highlight the torque specs and everything needed to assemble this engine…let‘s just it‘s the nerdy version of this video😁👍🏻 Regards Andreas

@TROdesigns 2 ай бұрын

This is mechanical love. Beautiful work brother!

@WorkshopRebuild 2 ай бұрын

Thanks a lot man! I appreciate your support!! Regards Andreas

@jeffshootsstuff 4 ай бұрын

Super cool to see this engine come together.

@WorkshopRebuild 4 ай бұрын

Thank you Jeff! It finally happened haha...as you know I ran into some issues, but maybe it's better that it took a little bit longer (who knows). Hopefully you can take something away from this video or from the upcoming "detailed" engine assembly video. Thanks for tuning in and all the best in 2024 for you. Regards Andreas

@chrisreeves8155 4 ай бұрын

Amazingly well done, so detailed. I will reference this often when I finally get around to putting my engine back together!!

@WorkshopRebuild 4 ай бұрын

Thank you so much, Chris! In a week I will have a detailed engine assembly video with timestamps, which might help you even more. I will focus on separate parts and share a detailed view on everything. Cheers😊👍🏽

@steveh2544 2 ай бұрын

Beautiful photography. So clear and bright. 👍

@WorkshopRebuild 2 ай бұрын

Thank you so much for tuning in and leaving a great comment😃

@InTheDogHouse3DPrinting 8 күн бұрын

That is a beautiful piece of machinery! Great work on the rebuild, nice clean shop, stand, and tools. I would love to have a job like that. I have been a small engine mechanic for over 40 years, and I loved working on bike engines. I was recently forced into retirement due to health issues, but I still work on stuff on the side when I can. Thank you for a great video.

@Freba66 2 ай бұрын

In the nineties I was team leader of the Police motorcycle team in Amsterdam. We had 35 solo motorcycles and 23 sidecar motorcycles. All R60/5. Lateron the K75 and sidecars from EML with R75/5. And in 1969 I learned to ride a motorcycle with the police with the R50, which at the time also had a sidecar. Great things to transport the detainees with their heads down in the sidecar during the student riots at that time.

@WorkshopRebuild 2 ай бұрын

Wow, what a story! Thank you for sharing this in the comment section, Sir!😃👍🏼 Besides the Police team, did you own a personal BMW Airhead or possibly a K-Bike? Regards Andreas

@Freba66 2 ай бұрын

@@WorkshopRebuild I have owned a K100RS twice myself. Lots of vibrations in the 4 cylinders. Oil consumption. I enjoyed the Honda VFR and the KAWA ZZR 600/1100 more. Later we had the K75 at the Amsterdam police. Less vibrations. Great for surveillance tasks. Never any problems. Nickname of the BMW Boxers; Warthog. hahaha

@WorkshopRebuild Ай бұрын

Did you own the one of the early K100RS bikes with 2-Valves per cylinder? Very interesting bikes, unfortunately I‘ve never been on one of them before. The K75 doesn‘t get as much love as it should, because everyone is automatically drawn towards the 1000cc engines…maybe that will change as time passes☺️ Thanks for sharing!

@tomphillips2608 3 ай бұрын

Point ignition... a purist! Also, props for someone using a torque wrench correctly. No 2x,3x, bounce after values have been reached! Great stuff here.

@WorkshopRebuild 3 ай бұрын

Thank you for you overly positive comment! I was taught to never double torque a fastener and that‘s why I never do it. It‘s also a good thing to keep important measuring tools and torque wrenches calibrated for accurate measurements and values. Thanks again! Regards Andreas

@labbo5591 2 ай бұрын

A pleasure to see a passionate clean and precise assembly!!!😁😁😁

@WorkshopRebuild 2 ай бұрын

I’m glad you enjoyed this engine assembly video & thank you for tuning in! Cheers😃👍🏼

@Vtech-86 2 ай бұрын

I had to come back and watch this video again! It’s such an incredible video and the finished engine looks absolutely amazing. 👍👍

@WorkshopRebuild Ай бұрын

Thank you so much for your support! It means a lot😃👍🏼

@S2NAZ 4 ай бұрын

Stellar work on that engine 🤜🏻 this will be so amazing to see the bike running again Happy New Year Andreas!! 🎉

@WorkshopRebuild 4 ай бұрын

Thanks a lot!!!🤛🏼 (fist bump back) I’ve got a large order of parts that just came through the door and I’ll be able to mount more parts onto the frame. I’ve got a lot of content planned for the new year😃 Happy New Year Year to you too!! Thanks for your ongoing support, it means a lot to me😊👍🏽

@mraiaghmohamed7914 Ай бұрын

Die Wunder der deutschen Mechanik. Sehr schöne Arbeit, wirklich großartig. Gut gemacht.👍👏

@WorkshopRebuild Ай бұрын

Du hast völlig Recht! Danke für deine Worte😊👍🏼👍🏼 -Andreas

@woodhonky3890 2 ай бұрын

I've never seen a motorcycle engine with a brushed alternator before. I would imagine it has a very robust charging system. Outstanding work on the build!

@WorkshopRebuild Ай бұрын

The alternator is quite robust and it feeds enough power back into the system. If one would want more lights or go above and beyond the original setup, then it’s well worth upgrading the alternator. In my case everything will stay original as I’m aiming for an original restoration. Thank you for your kind words! Regards Andreas

@Vtech-86 4 ай бұрын

This engine assembly is a true work of art! The precision and craftsmanship on display here are reminiscent of a fine painting, each component meticulously placed to create a masterpiece of functionality. I will be watching this more than once. 👍🏻👍🏻👍🏻👍🏻

@WorkshopRebuild 4 ай бұрын

Thank you for being active right at the launch of the video and I'm pleased to hear that you enjoyed it. It's been a great journey to assemble this engine and it's finally finished! More videos are coming soon. Regards Andreas

@user-jg6bd7se8u 4 ай бұрын

Another great video! What a beautiful little engine you have built sir, incredible!

@WorkshopRebuild 4 ай бұрын

I appreciate it! I'm glad I was able to share this assembly with you and I'm glad I could finish it just before the New Year. All the best - Regards Andreas

@papabits5721 2 ай бұрын

Was always fascinated by the look of these engines

@WorkshopRebuild Ай бұрын

They sure are built very well and they look so simplistic! Thanks for leaving a comment. Regards Andreas

@tapartacus 2 ай бұрын

Absolute artist!

@WorkshopRebuild 2 ай бұрын

I appreciate your kind words😃👍🏼👍🏼

@stewartandersonjoinery5832 2 ай бұрын

Brilliant, long time since i worked o an bmw boxer engine, dont have the time to do so much like that nowadays, good to see it done nice and thorough.

@WorkshopRebuild 2 ай бұрын

Thank you very much! Engine rebuilds do take time especially if you want to do as much as you can by yourself and it's never a good idea to rush anything either. I'm glad I was able to share this assembly with you and thank you for tuning int. Regards Andreas

@carlthor91 2 ай бұрын

My first motorcycle was a 72 R60/5, I went on to have 2 more BMW's and 3 Harley's since. I think my riding days are over, great times, they where.

@WorkshopRebuild Ай бұрын

How cool is that! Which bike was your favourite? Regards Andreas

@weswright3187 2 ай бұрын

A very nice build. My OCD loved it especially. All the parts lined up very logically and in their place 🙂.

@WorkshopRebuild 2 ай бұрын

I appreciate your comment and I’m glad you enjoyed the way the parts were laid out. Regards Andreas

@frfrpr 2 ай бұрын

Outstanding filming and editing. The build was great also. Thanks for sharing this project.

@WorkshopRebuild 2 ай бұрын

I appreciate your words! This engine was a long time in the making, but I’m happy I could share the results with you😊 Thanks for tuning in! Regards Andreas

@alainfournol6786 Ай бұрын

what an outstanding work ! clean, accurate, close to perfection. thank you a lot !

@WorkshopRebuild Ай бұрын

Thank you very much for watching and leaving a comment. Regards Andreas

@ClotEastwood Ай бұрын

Fantastic Video. . . absolutely loved it. Can't wait for more. . . . .Thank You

@WorkshopRebuild Ай бұрын

Thank you very much for you comment and I'm very pleased to hear that you enjoyed this video. I will continue to share more updates on the BMW R60/5 motorcycle restoration project and I hope to finalize it very soon. Regards Andreas

@emilkvicktube 21 күн бұрын

what a wonderful syphony of parts, knowlage, perfection. it really was like watching a flower develop to perfection and beauty, more then nice work.

@WorkshopRebuild 14 күн бұрын

That is some overly positive feedback and I truly appreciate it! Thank you for watching this engine assembly develop from start to finish. Regards Andreas

@Vtech-86 4 ай бұрын

This video promises to be enjoyable👍🏻

@WorkshopRebuild 4 ай бұрын

Thank you for your comments😊

@carlyleporter5388 Ай бұрын

Took me back a long way. I never worked on that part of my R65. I put 200,000 miles on it and sold it. They say you can't wear a BMW out, but mine was wore down to the nub. But I took the engine for granted. Never had any problems but for the rocker arm assemblies wearing out. And I worked on it a lot. Clutch cables, brakes, forks, alternator problems, throttle gears, fairing mount welds cracking and those back sub frame welds cracking. Always cleaning those Bing carbs. But I guess they're one fine motorcycle all considered.

@WorkshopRebuild Ай бұрын

It sounds like you had quite the journey with your R65! Putting 200,000 miles on a motorcycle is a testament to both the rider's dedication and the machine's durability. Despite the wear and tear you encountered, it's impressive that the engine remained steadfast. Your experience highlights the maintenance and care required to keep a motorcycle running smoothly over the years. It seems like you've had your fair share of adventures and challenges with it, but as you mentioned, BMWs are renowned for their resilience. Thank you for sharing your story! Regards Andreas

@carlyleporter5388 Ай бұрын

To be truthful, the 200,000 miles is just a close estimate. The odometer stopped working at 31,000 or so miles. But I knew how many miles I had to buy a new rear tire, seems like it was close to 10,000 miles thoroughly worn out. I kept the old tires in a stack in the corner of my shed and when I finally sold the bike and hauled them off, it was close to a pickup load. The mufflers like to rot out on them too. Not inexpensive to operate. Seems like 45 mpg was about as good as I could get driving like grandma. The full fairing was probably responsible for the gas guzzling. In summer, feet get uncomfortably hot on long rides. If caught in the rain, the fairing would keep you dry with the right posture as long as you could keep moving. Boots would fill with water however. Hydroplaning would scare you into a coma. Once you get familiar with them, they're really simple to work on. But if you use one to commute, plan on working on it. Yourself. Unless you're rich. @@WorkshopRebuild

@douglas724 2 ай бұрын

Loved watching it come together…was sad we didn’t get to hear it come to life. New subscriber!😁

@WorkshopRebuild 2 ай бұрын

Thanks for tuning in and subscribing! I will do the initial startup once this engine is back in the frame and all hooked up! More content coming soon😊👍🏼 Regards Andreas

@douglas724 2 ай бұрын

@@WorkshopRebuild Excellent…thanks!

@Icychainz881 3 ай бұрын

Great work, thanks for posting!

@WorkshopRebuild 3 ай бұрын

Thank you so much for your comment! 😃

@Bduh2 Ай бұрын

Beautiful video! Well done! Having the right tools to do the job is a must!

@WorkshopRebuild Ай бұрын

Thank you very much! Having the right tools for an engine assembly is essential and it makes everything so much easier. As I work on new projects more custom tooling is made and I really enjoy making them. Regards Andreas

@bobbythompson3544 2 ай бұрын

Absolutely brilliant, I loved it!😊

@WorkshopRebuild 2 ай бұрын

Thanks a lot! I‘m glad you enjoyed this video of the BMW Airhead engine😃👍🏼👍🏼

@seahippies 25 күн бұрын

It is a pleasure to watch you work. From Australia

@WorkshopRebuild 14 күн бұрын

I‘m happy to share this video with you and thank you for your support from Australia! It means a lot to me😃👍🏼👍🏼 Greetings from 🇨🇦- Andreas

@petercarlsson6606 2 ай бұрын

Great video. Thank you! Can even work as ASMR. What a beautiful engine in silver.

@WorkshopRebuild 2 ай бұрын

I appreciate your nice words! Thank YOU for watching this video!! Regards Andreas

@lawrenceklein3524 2 ай бұрын

March 15th, 2024, 11pm, and I'm watching this really great video! Teally classy build! Thanks for posting!

@WorkshopRebuild 2 ай бұрын

Thank you for tuning in to watch and leave a great comment!😃👍🏼 Regards Andreas

@RBRM3 Ай бұрын

I completely forgot about these... They're pretty neat, just the process they went through making this and getting it just right makes me stip and just look at it for a minute.

@WorkshopRebuild 29 күн бұрын

I agree with you on that - they are really neat! I would have been amazing to see the work they did back in the factories, form casting to machining and to the assembly.

@ralphschreckengost6865 Ай бұрын

I have a 2003 airhead R1150 RT and I love it. It was a little getting used to after going with my V-Twin Harley that I came from. It's been very dependable and I've learned how to do all of the work myself well most of it anyway.

@WorkshopRebuild Ай бұрын

That’s such a cool bike with some great features, especially since it’s an RT! It’s a really good thing to be able to wrench on your own bike, you never know what will happen on a road trip😉 I hope your R1150 serves you well for many more years😊👍🏼 Regards Andreas

@jdhartenstein 4 ай бұрын

Impressive! Well done sir.

@WorkshopRebuild 4 ай бұрын

Thank you very much!😃👍🏽

@anilkarnam Ай бұрын

Beautiful!

@WorkshopRebuild Ай бұрын

Thank you😃👍🏼

@motoartosorno687 Ай бұрын

una verdadera joya el montaje y la pulcritud. Felicidades. Excelente trabajo.

@WorkshopRebuild Ай бұрын

Thank you very much!! Regards Andreas

@georgemorley1029 3 ай бұрын

Thanks and congratulations.

@WorkshopRebuild 3 ай бұрын

Thank you for tuning in and leaving a comment! 😃👍🏽

@gustaveluna9349 2 ай бұрын

just beautiful, when simply recon goldsmith

@WorkshopRebuild 2 ай бұрын

Thank you very much😊👍🏼👍🏼👍🏼

@richardfisher8055 21 күн бұрын

One of the best videos I have ever seen!

@WorkshopRebuild 19 күн бұрын

Wow, that‘s such a nice thing to hear Richard! Thank you very much for leaving an overly positive comment and supporting this channel with your Super-Like😃👍🏼 It means a lot!! Regards Andreas

@petermckee1061 Ай бұрын

So good to watch! It does my head good. Meticulous workmanship. Have subscribed. Cheers, Peter.

@WorkshopRebuild Ай бұрын

Thank you for you words and your support! Regards Andreas

@teccyfreak800 Ай бұрын

i have never seen such a detailed and interesting video, absolutely great ! Thanks a lot !

@WorkshopRebuild Ай бұрын

I‘m grateful for your comment! Thank you soo much!! Regards Andreas

@shazidost4820 Ай бұрын

Fantastic engine design

@WorkshopRebuild Ай бұрын

I agree with you😃👍🏼

@SubROVworld. Ай бұрын

I looove your work, they are so thoroughly executed 😊❤

@WorkshopRebuild Ай бұрын

Thank you!😃👍🏼

@kevinschilling1368 3 ай бұрын

Impressive, very impressive !

@WorkshopRebuild 3 ай бұрын

Thank you so much!

@robertocentonze9653 Ай бұрын

Bravissimo!! Ho avuto la fortuna di possedere una R 75/5 nel 1973 e mantenuta per circa 10 anni con tanto amore, mi hai fatto ricordare tanti bellissimi momenti, la moto era (per quei tempi) veramente eccezionale, si vede la tua notevole passione.👍👋Un saluto da Roma.

@WorkshopRebuild Ай бұрын

I'm happy that this engine assembly video brought back memories of your beloved R75/5 from back in the day. It would be great to hear some stories from you and your trips! Thank you for sharing your kind words, it means a lot to me. This work brings me joy and it will be a special bike once it's completed. More videos are coming soon and hopefully the end is near.

@WorkshopRebuild Ай бұрын

Greetings from 🇨🇦 Regards Andreas😃👍🏼

@user-gl8it1kt7z Ай бұрын

Great Help, thank you!

@WorkshopRebuild Ай бұрын

Thanks so much for your feedback! Cheers

@christianrabe7984 Ай бұрын

Thank you, how nice to watch, I thought the cut of the rings should be installed at 120º from eachoder

@WorkshopRebuild Ай бұрын

thank you for your feedback! the piston rings were installed 120º apart from each other, but necessarily shown in detail in this video. I have a full engine rebuild video about this engine, which shows every step of the assembly. Fun fact: Piston rings rotate on pistons and within the cylinder bores. Even when installed 120º apart from each other there is no control over the ring gaps after that. It's very possible they line up after every now once the engine is running.

@MrJackmandew Ай бұрын

Back in the 70s i was in highschool and a friend of mines father had a chopper with this engine,, pretty cool

@WorkshopRebuild Ай бұрын

Now that‘s something different! That must have looked pretty rad back in day😁👍🏼 Cheers

@so88113 20 күн бұрын

Beautiful machine. I would love to have one just the set on my coffee table and to take apart and reassemble.

@WorkshopRebuild 14 күн бұрын

Thank you for your positive thoughts! A kit engine would be very cool, but to take one of these apart, many specialty tools are needed and therefore it‘s not very straightforward. If it were just some office art, that would be just fine and that‘s actually a cool idea. Maybe something I should look into😃 Let me know if you‘d be interested in that. Regards Andreas

@littlejohn9458 Ай бұрын

Awesome work!!!

@WorkshopRebuild Ай бұрын

Thank you, I appreciate it!

@wiwingmargahayu6831 2 ай бұрын

wow german and usa is so amazing sir

@WorkshopRebuild 2 ай бұрын

Thanks a lot! This engine was designed and built very well by the Germans and I had a fun time rebuilding it😃🤙🏼 Cheers

@ralphparsons7306 19 күн бұрын

Marvellous! Pls make sure you have used Copper grease on the exhaust manifolds It makes it so much easier when you take them off I know this has been mentioned previously but it makes a ghastly job in the future absolutely easy later on

@WorkshopRebuild 14 күн бұрын

Thank you very much! Great advice here and definitely worth pointing out for other BMW collectors. I will be using copper grease on the exhaust threads once the new headers go onto the bike. Regards Andreas

@PistonetSavon 4 ай бұрын

Fantastic job! Congrats

@WorkshopRebuild 4 ай бұрын

Thank you very much! 😃

@alstrom1000 2 ай бұрын

Fantastic video !!

@WorkshopRebuild 2 ай бұрын

Thank you so much, I really appreciate it😃👍🏼

@dawshill1400 4 ай бұрын

Very professional. Respect!

@WorkshopRebuild 4 ай бұрын

Thank you very much! I appreciate your words. Regards Andreas

@ccoates1064 2 ай бұрын

Fantastic. Thank you

@WorkshopRebuild 2 ай бұрын

I appreciate it! Thank YOU, for watching this video and leaving a comment. Regards Andreas

@_counterspell Ай бұрын

Boxerworks in GA says hello ! really great build and editing

@WorkshopRebuild Ай бұрын

Thank you for watching this video and leaving a comment! I enjoy your Instagram content and it's always great to see the bikes you work on. Regards Andreas

@sundarAKintelart Ай бұрын

Beautiful

@WorkshopRebuild Ай бұрын

Thank you, Sir!

@Ivan.9191 4 ай бұрын

Mehr besser geht nicht 😉 Perfekte Arbeit zum Jahresabschluss. Wünsche dir einen guten Rutsch ins neue Jahr und freue mich auf deine Projekte im 2024. Gruss Ivan

@WorkshopRebuild 4 ай бұрын

Danke viel mal Ivan!😀 Der Wiederaurbau dieses Motors hat lange gedauert, aber die Zeit und Muehe hat sich gelohnt. Vielen Dank fuer deine Worte und ich wuensche dir das Gleiche! Happy New Year 🎉 Dieses Projekt wird bald abgeschlossen sein und andere warten schon im Hintergrund. Wir hoeren uns, Gruss - Andreas

@bob7230 2 ай бұрын

Outstanding video! This was the first video of yours that I’ve seen and I am now a subscriber. Your video was clearly filmed and well paced and no unnecessary chatter, thank you very much! Your workspace is so clean and orderly and you are very methodical in your approach. This was the best video of this type I’ve seen. Looking forward to watching more of your channel! 😃

@WorkshopRebuild Ай бұрын

Wow, thank you for your overly generous comment about my video! It’s much appreciated!! I tried something new for this video and I’m glad you enjoyed it. There will be more BMW related content up until the completion of the BMW R60/5 motorcycle. I hope you enjoy the rest of my videos and please let me know if you ever have any questions or concerns about my content😃👍🏼 Regards Andreas

@tomthompson7400 4 ай бұрын

great video , even better finish on that motor , well done.

@WorkshopRebuild 4 ай бұрын

Thank you for your feedback! I had a blast rebuilding this engine and I'm glad I could bring it back to a "like-new" condition after 50 years. Regards Andreas

@user-bx8lo8sg6y 4 ай бұрын

Amazing work Andreas! Do you have a detailed video for the installation of the engine case main bearing ? Many thanks

@WorkshopRebuild 4 ай бұрын

Thank you Sergio! I will have a new engine assembly video very soon. This video will feature all details of this engine assembly...custom tools, torque specifications more video angles etc. I hope this will be helpful to you for the engine main bearing installation within the engine case. If you need more information about the main bearing on the opposite side, I made a separate video about that: kzfaq.info/get/bejne/p9V-aK94lq_JdXU.html Thanks for tuning in and leaving a comment. Regards Andreas

@MyWillypilly 4 ай бұрын

You should go back and edit the video some more and put in every torque value. People will come back to reference this for years to come.

@WorkshopRebuild 4 ай бұрын

I will have a separate engine assembly video, which will be dedicated to the details of this engine. Torque specs, tolerances, important info and so on. This will be released in a week’s time! Thank you for your great suggestion as I appreciate your feedback👍🏽 Regards Andreas

@MyWillypilly 4 ай бұрын

@@WorkshopRebuild I'm convinced you do great work. This won't be your last I'm sure. This is the beginning...

@WorkshopRebuild 4 ай бұрын

@@MyWillypilly thank you! There will be more BMW Airhead content…that‘s all I can tell you for now😁

@officialmysteriousrider130 2 ай бұрын

Them cases been vapour blasted ? @@WorkshopRebuild

@marcelj.scacchi8475 2 ай бұрын

Better switch to electronic torque control devices since mechanical ones or not really precise +/- 7-12%

@javiermora4389 9 күн бұрын

Excelente ,felicitaciones un trabajo de precision de la vieja escuela ,exitos . Saludos de Ecuador.

@ioannisbatas1614 28 күн бұрын

Superb !!!

@WorkshopRebuild 28 күн бұрын

Thank you very much, Sir! Regards Andreas

@hermenegildorodriguez6876 Ай бұрын

Excelente trabajo ,gracias por tus videos

@WorkshopRebuild Ай бұрын

Thank you very much!! Regards Andreas

@abdullahyalcn376 2 ай бұрын

şiir gibi..sen harika bir ustasın , ellerine sağlık kardeşim

@WorkshopRebuild 2 ай бұрын

Thank you very much for you kind words, Sir! Regards Andreas

@tiade5762 2 ай бұрын

Esses trem de vídeo de rebuilding é chique, eu gosto.

@WorkshopRebuild 2 ай бұрын

Thank you so much!

@lalu-breizh8529 Ай бұрын

Excellent travail, minutie et précision, propreté du plan de travail et préparation .....👍👌

@WorkshopRebuild Ай бұрын

I appreciate your comment! Thank you and I hope you enjoy my upcoming videos too😃👍🏼

@benparvar 4 ай бұрын

Amazing!!!

@WorkshopRebuild 4 ай бұрын

Thank you very much, Ben!

@simonchilli2088 4 ай бұрын

Awesome job Andreas!! You made that look as easy as a Meccano build. You didn't drop a single tool or small engine part onto the floor. If it was me that would be the order of the day as I'm clumsy. I was interested to see where the starter motor was housed as that was a problem on my R65 back in 1980. The dealer I took it to did a full service on it and charged me about £240 which was a lot of money back then. They didn't fix the starter problem tho🤗

@WorkshopRebuild 4 ай бұрын

Thank you, Simon! It wasn’t as easy as a Meccano assembly, but with the right tools it’s a breeze. No parts nor any tools were dropped during this assembly😁 The starter is typically very accessible, as it’s beneath the started cover. Some starters had issues on the Airhead engine, because they needed to be lined up with the starter ring-gear. If they weren’t lined up correctly, the starter would get damage or in worst case scenario it would break the engine block! Oh wow, £240 is very expensive! Do you still have your R65?