I never de-greased mine when new and I used blue loctite. Never had a problem with them coming apart. Just let them sit for a few hours before you run em. The only problem I've noticed with them is when you tighten on the wheels it squeezed the rear carrier (with spacers installed) causing a slight binding problem. However I've figured out if you put two Teflon washers in where the middle spacer goes it helps to get rid on the binding, not 100% but pretty close. The washers are 5x8x0.5, the same ones that go before the cross pin on the stock plastic axle.

I have MIPs on my 4s rustler and I didn't degrease them first and only used blue lock-tite and they didn't fall apart at all and trust me I gave them a beating and they held up great so I know for a fact you're safe with them! Keep up the great work kev!

Awesome!!another great vid. Keep up the great work

You can also wrap the knuckle with heat shrink tubing to prevent the shaft pins from falling out...

Thank you for an informative video! Might have to do this down the road.

Put some heatsrink around the cvd joint. If they do come apart it will help keep you from losing the pin.

YES! The Slash is on the road back to health! Plus, those Trencher tires are holding up pretty well!

Brilliant video Kev keep up the good work

Can't wait to see how those hold up. 👍👍

Watching Happy . Thanks For the Video ! Them Shafts look serous

They are THE BEST!!!!! You will NEVER EVER have problems with them. I love All your rcs!!

Another great video Kev. Keep it up!

Bought these for my 2wd slash. They work great. No problems at all.

You will be completely fine with those shafts I have those on my slash 4x4 and haven’t had a problem for 5 or 6 years and they are still in use today

Awesome upgrade! Congrats on 60K subs!

great Macro work! keep the vids coming!

Will you get a Stampede 4x4. Keep up the good work 😃

FINALLY ! after all this time haha MIP was the first thing I did when I had a slash ,,,,cant wait for the UDR!

Great video you are a natural born rc youtuber for sure!!!

Good work man!

Love your vids kevin👍🏻

Awesome video man. A word of advice with those shafts is if the inside grub screw come out and get lost just find a normal style threaded pin and use it

Finnally some love for the traxxas

You should do the 17mm hex conversion and run 8th scale buggy tires. Way better for bashing

Cool video kev 👍

Man they look good

Great vid kev. Hopefully those mips will stay together for you. Keep bashing......and send it....

I love the wheels on that slash😀

Hey Kev that was Quick

Can't wait till you come out with a monster truck video!! I love your rc videos a lot but it's been a long time since your last monster truck update video

I just found out you upload your stuff in 4k epic

Your awesome at rc cars and what u do :)

Awesome this is very heavy duty i run this in 6s no problems

Good work 😊👍

Looking good,I’m doing a overhaul on my slash as well,got the same body the floteck,it’s gonna come out sweet! I think,lol👍👍👊👊📹📹

Yaaaaaaaasss dailyy dosis of RRRCCCCCC

Love them

Kev, I subscribed caus' I do like your vids + everything to support a grown man being able to stay at home in his pjs' all day and play with RC toys :)

Love the soft cheese part tray haha.

Prep is key Kev 👌🖒🖒🖒

Grate vid kev !! If you run dule can you run 1 3s and one 2s

Nice vid

Nice man it was on time😄😂

What a beast! Looking forward for the UDR and Revo 2.0. Guess you are wating for the spring aswell. Weather is horrible in Sweden.

Nice video

The thumbnail man the thumbnail

You should get an LC RACING 1/14 car. Beastly things and pretty cheap too! I'd love to see you work your magic on it, could be a baby brother for the Hobao lol

great vid man LOVE IT!!!, btw that is that song called? I NEED IT !!!

Nice bro

Hey Kevin what if you try putting the grease in and try using shrink tubing over it

Great job, meant to ask the last video but forgot, where do you get you subscribe stickers from? also why Traxxas only why don't you have other makes?

Hi Kevin. Massive fan of your channel and just about to pull the trigger on a slash platinum from model sport. Would you recommend them as my wife has said I can only have one new rc this year so have to make it count lol. I did have 5 new ones last year so I see where she is coming from lol.

Do a Rustler to Slash conversion for a video. BEST RC CHANNEL ON KZfaq!!

You should put some grease on the splines keeps them from rusting inside there just a thin thin layer

Hi Kevin I am a big fan

Those are the only ones that can handle the power of my rustler. They are expensive, but still cheeper than several replacements.

Here is a idea Kevin, get the X-Maxx snowmobile conversion kit and see if its worth being interested in cheers! Seems to me its too slow to really be a functional basher setup

Have them on my rustler 4x4 they are totally epic

Extra weight wont be a bad thing on that, i think it will improve things a tiny bit and be more durable. RCs that are too light are prone to flipping, turning over easily, especially with too much power going through them

I’ve been running though on my stampede 4x4 for 2 years and they barley warn at all and one tip put heat shrink over the set screws on the diff contention points that’s what I did on mine they work great

You dont have a spare complete shock for the mad force laying around? 😋 need one for my old twin force

cool amazing

Hi from Russia!

I've heard there good but sure you guys know more about then me

Love your videos I build monster trucks too let me know if you ever need help getting parts from the us

It’s MIP not “MPI” and you could’ve ordered them on Amazon for $55!!!!!

I hated MIP’s on my rustler, they are heavy, and they feel loose and rattle about. Also they don’t work with bushings, so I had to buy bearings on top of the $90 price. I ended up buying $20 integy shafts and I love them

MIP's aren't indestructible but they are arguably the strongest and last axles you may ever buy.

Make a video about cleaning your rc cars and see how new you can get them to look

Hey kev. I have the same problem and I use 3 different shafts... all broken... Are they better or are they the same as the other and brake easely?

The traxxas slash i hpe it gets more love in future is it for sale?

Cool

You should honestly get a Senton 6s !

Are you going to review the Erevo 2.0?

Hey kev will 4x4 shafts work with my 2wd rustler vlx ?

now tim for a clean!

I wouldn't Have left the pieces that go in the cvds dry... They'll wear out sooo much faster. Haven't had a problem with dirt wearing those out yet.

Just a heads up, you don't want to leave them dry because they will rust like crazy and will emit a horrible grinding noise. I thought the same to leave them dry, but it is better to just grease them, especially in the splines.

Heh, now watch the center shaft twist like a pretzel or the diffs pop!

If you want you can put 17m adaptors on there to get bigger tires on

Hey Kevin my scx10 won’t reverse but it goes forward and it’s a not my transmission because it is brand new do u have any answers

Lol MIP gonna make me chooooke

Can the velinion 3500kv motor actually handle 4s safely? I know the esc can't though I was just wondering

What is the name of the song? Love IT!

Do you thing a vkar bison is a good car?

Never go in dry Kev...

How are the shafts holding up I'm thinking about getting some. I value your opinion because of the abuse you tend to put your cars through so anything that you say yes or no to I will most likely listen to. Lol

Kev when are you going to use your touring cars again

Does tekno still make some too ?

I've broken all my axels several times. I just bought integy and broke them with in ten minutes. I was going to get these but because they are so heavy duty I was scared of overheating issues. Anyone have any problems with the rustler 4x4 vlx?

An arrma senton 6s don't need this kind of upgrade. You should get one kevin

Hi Kev. 1.please do more X-Maxx bashing vids 2.please keep going with the nice videos 3.as always make sure to hit the like button and subscribe

Where did you get the MIPs?

Can you please recommend a petrol or nitro rc car for under £300

Considering doing a 2wd slash 4s or even a 6s conversion?

Your not going to have any issues because I had these on my slash running 6s on big 2.8 sized trenchers and haven’t had any problems.

Trust me Kev, these things won’t break. I’ve had mine for years now... you have a higher chance of snapping the car in half than breaking one of these😁

Let the lock tight dry befor screwing the screw back into metal

Hi Guys i got me some new driveshafts today and they came with some screw on hexes but now i cant Put the wheel nuts on too tight because Then the wheels wont Spin freely. Has anybody a fix for that?( Btw i have a 2wd Rustler)

Rustlers were around 80