Honda Ruckus / Zoomer 50 - Carburetor Cleaning / Rebuild

Honda Ruckus / Zoomer 50 - Carburetor Cleaning / Rebuild | Mitch's Scooter Stuff

Рет қаралды 28,987

4 жыл бұрын

I am going to clean and replace new jets and gasket on Honda Ruckus / Zoomer 50cc scooter carburetor!
*** Tools I used in this video:
Phillips #2 screwdriver - amzn.to/2fgdZDL
Flathead screwdriver - amzn.to/2jN7lpE
Toothbrush - amzn.to/31HSoXI
Carburetor spray cleaner - amzn.to/2Xy8Fiy
Pilot jet - amzn.to/2yNDKV5
Main jet - amzn.to/2Xy8ZOi
Bowl o-ring - amzn.to/2Vp9MhR
** Shop all the scooter tools and gear I use HERE **
bit.ly/MitchsScooterStuffSHOP
** Help translate my videos to your language HERE **
bit.ly/ADDYOURLANGUAGE
Want more free Scooter Tip / Tutorial videos - Help support this channel! Paypal donation: bit.ly/PayPalMitchsScooterStuff
Follow Mitch's Scooter Stuff:
Instagram - bit.ly/2fB8gay
Facebook - bit.ly/2gEsYpt
My other KZfaq channel - bit.ly/2g4i5d5
Filmed by Mitch Bergsma
Edited on Final Cut Pro X on Mac
Scooter Intro edit by Erik Lauritzen
Check out his websites: bit.ly/2gQe8d4
#MitchsScooterStuff
#HondaRuckus #Carburetor
Like the music? Check out this great library for KZfaq videos here:
bit.ly/MICTUNES (try it for FREE!)
******************************************************
IMPORTANT
Please only use and share this embed code of the original video.
Third party downloads and distribution is not permitted.
If you are interested in buying footage or for booking information please contact: hire.micbergsma@gmail.com
******************************************************
About Mitch's Scooter Stuff:
This channel is all about scooters! Tutorials, How to, DIY Maintenance, Reviews, Mods, Vlogs, Just for Fun, and more!
Honda Ruckus / Zoomer 50 - Carburetor Cleaning / Rebuild | Mitch's Scooter Stuff
• Honda Ruckus / Zoomer ...
Mitch's Scooter Stuff
/ mitchsscooterstuff

Пікірлер: 53

@MitchsScooterStuff 4 жыл бұрын

*** Tools I used in this video: Phillips #2 screwdriver - amzn.to/2fgdZDL Flathead screwdriver - amzn.to/2jN7lpE Toothbrush - amzn.to/31HSoXI Carburetor spray cleaner - amzn.to/2Xy8Fiy Pilot jet - amzn.to/2yNDKV5 Main jet - amzn.to/2Xy8ZOi Bowl o-ring - amzn.to/2Vp9MhR

@Cinci746 3 жыл бұрын

Thank you for keeping your videos free, just wasted my time watching a @RollingWrench carb cleaning instruction video and only at the end did they reveal I would have to pay to see the rest.

@TheOtherBill 4 жыл бұрын

Great explanation, as usual. 👍 Also, it's always a good idea to check/clean the needle and seat, only takes 2 minutes when the bowl is off. If you have a difficult time clearing out a passage with just spray cleaner, cut a piece of wire off a wire brush and poke it with that.

@JoeyPole13 4 жыл бұрын

Sweet! I just went back to work and need to clean the carb. I love your videos man so glad you did a Ruckus carb clean!

@WinterRaven25 4 жыл бұрын

Perfect timing! I have a carb on my met that needs to be leaned out a bit. No better time than the present. Thanks!

@68POD 2 жыл бұрын

Many Thanks For This Video. In Ireland and my Zoomer was struggling, it’s like new now. Your Videos are amazing ☘️

@rberni10 Ай бұрын

These are VERY helpful videos thanks !

@bradhoyt5541 4 жыл бұрын

Great video! Educational and entertaining.

@MitchsScooterStuff 4 жыл бұрын

Thanks Brad! 😄👍🏼🙌🏼

@russelallen5342 4 жыл бұрын

Important to remember to put girlfriends toothbrush back where she stores it!

@MitchsScooterStuff 4 жыл бұрын

😂😂😂😂

@davegillette953 4 жыл бұрын

Very nice thanks!!

@paulhogan2389 2 жыл бұрын

Thanks Mitch..

@SiegePerilousEsauMaltomite 3 жыл бұрын

Feel free to sign in your videos, bro. We should all be learning asl/esl/whatever our respective languages are. 👌 F

@MitchsScooterStuff 3 жыл бұрын

Noted 🤙🏼🤙🏼

@PublicDisturbanceNJ 11 ай бұрын

❤ this. Wasn't expecting to pick up an additional skill from scoot maintenance vids on YT but Mitch seems like a genuinely good dude, and that could be in lieu of $$ I saved not getting gouged at a shop/dealer

@moonraker814 2 жыл бұрын

Thank you Mitch.

@MitchsScooterStuff 2 жыл бұрын

You’re welcome!

@dankhimself 2 жыл бұрын

You should also clean the circuits that the jets are threaded into. Indle, midrange and main in this application.

@destroyer1823 2 жыл бұрын

Everytime you do maintenance do you have to reset the ecu?

@GuruBoards 4 жыл бұрын

Aloha Mitch! I just had a quick question on Jets... I was curious what jets you recommend running? I have a 2020 Honda ruckus and the only mods I’ve done is a and NCY-CDI box, and NCY coil, NGK iridium splug, 5.5 sliders and a trail tack. I live at 5200 feet and about 160 pounds. I want to put a high flowing air filter(a K & N) in my stock airbox but when I do it seems to flow too much air and ran to lean. Also after installing the NCY-CDI box and coil I thought it would help it run not so rich here in Denver, but not really. So if I run the stock air cleaner it runs slightly rich and if I run the aftermarket air cleaner(K&N) it runs to lean so I’m curious what jets you recommend?

@tommygoad659 2 жыл бұрын

is there a certain torque spec when putting the jets back in ?

@daleyarmstrong8337 2 жыл бұрын

Where is the link to buy the new jets?

@evelynagdeppa8749 3 жыл бұрын

where can i buy ruckus spare parts

@victorrobinette114 Жыл бұрын

There is one more jet to check. It is called the cold start jet. Mine was clogged up. Took me a while to clear it out.

@willb3636 Жыл бұрын

How do you get that jet out?

@ABC-rs4vk 3 жыл бұрын

굿

@mrfenderguy1 3 жыл бұрын

You should also spray thru passages when jets are removed. Also why didn't you take out needle and clean there too?

@MitchsScooterStuff 3 жыл бұрын

I did and I realized I didn’t put that clip in this video 🤦🏼‍♂️

@mrfenderguy1 3 жыл бұрын

@@MitchsScooterStuff so, you removed float and cleaned needle and passage, then reinstalled float? Thanks

@user-pt3if4qo8o 4 жыл бұрын

好手

@evelynagdeppa8749 3 жыл бұрын

i always watch your show and wander where to buy ruckus spare parts

@chimbo8741 3 жыл бұрын

I always end up having to go to the dealership bc the parts are all honda brand and I cant find them anywhere else :/

@nunya8866 3 жыл бұрын

Just got a 2016 ruckus 3,035 miles. I "Think" I'm feeling some kinda surging while riding along between like 25 and 40 mph. Pretty sure it's not the carb, just replaced the air filter and still feeling it. I'm just lightly but I was wondering is this leading to something serious drivetrain wise? Thanks for all your info BIG money saver!

@MitchsScooterStuff 3 жыл бұрын

Check the rollers 🙌🏼

@nunya8866 3 жыл бұрын

@@MitchsScooterStuff rollers?

@jgibson6041 11 ай бұрын

Maybe rollers or sliders need replacement?

@nunya8866 11 ай бұрын

@@jgibson6041 ended up being my front tire

@crismolina8033 3 жыл бұрын

Amazing video Mitch! To the point and easy to follow. Any tips getting the piece below the main jet ( I'm assuming a needle) to come out? It appears to slide out with ease on your video (2:34). Thanks!

@chimbo8741 3 жыл бұрын

I'm having the same problem. Did you manage to get it out?

@crismolina8033 3 жыл бұрын

@@chimbo8741 I did! I removed the jet/idle needle by taking off the top. This gave me access to spray carb cleaner on the piece mentioned in the comment. It came out after that! Sorry for the lack of terms! New to rebuilding scooters.

@progaragechinskiemotorki 4 жыл бұрын

😁

@mumufasa0007 3 жыл бұрын

Hello - I have a 2020 ruckus, the temp light comes on randomly as if over heating and scooter will want to stop running. If you let it cool, the problem seems to resolve itself and can go for days/weeks before it does it again. Any ideas or tips I can try to resolve? Thanks very much..

@MitchsScooterStuff 3 жыл бұрын

Aloha! Is your coolant and engine oil at full line and healthy?

@mumufasa0007 3 жыл бұрын

Mitch's Scooter Stuff Yes, thanks

@tck9166 3 жыл бұрын

Sorry to hijack your question for Mitch, but I belive the 2020 Ruckus suffers from a waterpump issue? In all honesty, it's not something I've paid a whole lot of attention to as mine is an '02 Zoomer import, but from the chatter I've seen on the forums, this does appear to be a common issue. Contact your local Honda dealer as they are covering the pumps under warranty. At least that is what I have read online 👍🏻

@mumufasa0007 3 жыл бұрын

KC thanks for the input. I’ll check it out