Mitered Beam Perfection | What is the best approach???

Рет қаралды 196,915

Күн бұрын

In this video we are making square, 8x8 white oak beams with mitered corners. We cover the best strategy & tactics to get perfect results with as little struggle and hassle as possible. From material selection, ripping long bevel cuts, beam assembly, to final sanding, we cover it all in this video.
Shinwa Shalk Line - geni.us/eTZeYLe on Amazon (commissions earned)
Freud 160 mm 14 Tooth Track Saw Blade - geni.us/wPuhs on Amazon (commissions earned)
Festool TSC 55 Track Saw - geni.us/YcRUg on Amazon (commissions earned)
-My Favorite Tools - Insider Carpentry Amazon Site - www.amazon.com/shop/insider_c...
-Support more content like this by becoming a PATREON SUPPORTER - / insider_carpentry
0:00 Complete Process Overview
3:23 Intro
4:10 Track Saw or Table Saw for Long Bevel Rips
5:12 Selecting Material and Orienting Crowns
7:18 Festool TSC 55 Track Saw for Long Rips
10:18 Why is a track saw better?
14:08 Mitered Beam Assembly with Glue & Pins
15:34 Add beam internal blocking
17:12 Burnish & Sand Corners While Glue is Wet
19:45 Finished Result of Glue & Pins
20:22 Miter Folding Beams with Tape
28:10 Final Thoughts on Tape vs Pins
-INSTAGRAM - insider_carpentry
-As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 258

@InsiderCarpentry 2 жыл бұрын

Tools used in this video: Shinwa Shalk Line - amzn.to/3BOLXo5 Freud 160 mm 14 Tooth Track Saw Blade - amzn.to/2UZFTbN Festool TSC 55 Track Saw - amzn.to/2UXZEk1

@Huntergresh 2 жыл бұрын

What white oak boards do you use?

@jaimesolis8362 2 жыл бұрын

So Sad I barely see this anymore. Keep it up my man. We are the last of an apparently dying breed. I'd love to meet more folks who take so much pride in their work nowadays... I work in Orlando. I'm working in a high value area, yet it's hard to see this type of finish carpentry. Its astonishing really...

@garethheathcote4988 2 жыл бұрын

What glue are you using mate? I have to do something similar next week but with white oak plywood. 🙂

@jasonb421 Жыл бұрын

Incredible! So, I've never used a track saw... How does the track not slide from side to side when you're making your 45.5 degree bevel cut along the edge of the board? I noticed there's no clamping or fastening the track to the board and it seems to just be laying on the board... oscillation and sliding of the track aren't an issue so you can get a nice consistent cut right along your chalk line? I definitely need a track saw... Can a typical skill saw be used as a track saw or do you have to buy a track saw that goes with a particular track?

@jasonb421 Жыл бұрын

@@garethheathcote4988 He's using Tight Bond 3 (the green label). It's the strongest of the 3 wood glues that Tight Bond makes and it's thinner and you have more time to work with it before it sets up than the other 2 Tight Bond wood glues. Also, because it's not as thick as the other two, it doesn't spew out of the mitered edges onto the work surface as much. And it holds extremely well once it sets up (after maybe 10 or 15 minutes).

@thomlipiczky9021 2 жыл бұрын

So nice to see a finish carpenter who knows how to set up, think through, and execute! I've been doing this for a long time, and I'm learning lots watching you!

@Samuel-zo6yh 2 жыл бұрын

Love how efficient you are with things, I want to work alone, all the time. You constantly show me things that make it possible for me to do it alone. Thanks!

@Maitairanch Жыл бұрын

You’re a f***ing G I had to watch all your ceiling beams videos 10x each. I dedicated one month to buy the same gear and perfect them. I’m now making a living here in a new town I moved to because of you 🙏 god bless you

@UncaRyRy 2 жыл бұрын

Not only do you teach great techniques for making perfect mitered corners, but you also show subtle work/life balance tips with your golf glove tan line! Hope you hit it as straight as your mitered edges!

@johnmack1185 Жыл бұрын

Where artistry meets craftsmanship. Blown away!

@chancericcius5142 2 жыл бұрын

When I walked through that house I was amazed by your incredible work. I’m not impressed by anyone typically! You’re awesome!

@maxgilbert18 2 жыл бұрын

I love watching someone who can best me in construction work. It's the only way to learn. Maybe one day I'll have your level of skill. Those perfect track saw cuts are so much more difficult than the video makes them look. Your skills are off the chart.

@Stevelemontrudy 2 жыл бұрын

Dude, every single one of your videos is a master class on the topic at hand. I appreciate that you show what to do, what to avoid, and how to fix the unavoidable. Thank you so much.

@dusttinfinn6583 Жыл бұрын

Great production.. very clear explanations, no gaps in steps you take, and there’s never any “extra” and fluff dragging the video out with useless information. Very much appreciated sir. Like watching Larry Haun.

@jeffpoulton6112 2 жыл бұрын

I just did my first folded miter using your techniques from this and your other videos and I'm blown away with how well it turned out compared to my previous attempts. The 45.5 degree angle and the burnishing are pure gold! Thanks for sharing your craft with us Spencer.

@InsiderCarpentry 2 жыл бұрын

Fantastic!

@joebethune5330 Жыл бұрын

Spencer as far tape miter folding there are two different types of clear plastic tape. One stretches (white label on inside of roll) and the other does not stretch (yellow label on inside of roll), use the not stretch

@johnboggs8765 Жыл бұрын

where did he mention a 45.5 degree angle? i must have missed that. He didn't use a 45 degree angle on this?

@himmatdeogan2823 2 жыл бұрын

Hi spencer. Can u also make a video on how u install these beams .

@alfonsolopez693 7 ай бұрын

I randomly came to your video.... I am so impressed with your technical skills, absolutely stunning work!

@RamblinRoadies 2 жыл бұрын

I'm a framer that does finish on my own home. Most of my finish techniques were self taught. It's great to be able to pick up some tips from an "expert".

@youstubers5722 2 жыл бұрын

18:49 Advice from a true pro! ;-)

@T.E.P. 2 жыл бұрын

just gotta say how incredible and thoughtful these vids are coming through ... can tell you have the perfect touch on your craft, of course, and also making these. fantastic man ... superb

@leoyoung181 Жыл бұрын

I'm so grateful to watch you work, and thanks to take the time to spread you acknowledge to us.🙏

@justelvin 2 жыл бұрын

I love this format of video. Thank you for everything you're doing!

@justelvin 2 жыл бұрын

I laughed, and laughed at 19:00 dropping the glue "right where you can step on it" - Why do we do it? Every time!

@marydattoli8156 2 жыл бұрын

Good Ole Murphy's Law!

@royordway9157 2 жыл бұрын

I just avoid that step and wipe the glue on the sole of my show to start with. With caulking I just squirt a couple dabs on my pants to start with.

@mykolashatkovskyi8817 2 жыл бұрын

I just thought the very same thing as you said! 😂😂😂

@wuillians 2 жыл бұрын

When you stopped to clear the chips out of the hose it made me realize that's another advantage of the track saw. You can stop a cut and pick up where you left off. There's plenty of examples where you would want to stop a cut mid operation (specially when the blade is binding) and it's hard to pick it back up while still getting a clean cut.

@packoutjunkie5813 2 жыл бұрын

The stuff you do is awesome. Very impressive. My dad and I trimmed houses for quite a few years. But the ones you do are a set up and camp out job!!! Keep up the great work.

@robwiencek9608 2 жыл бұрын

I am beyond amazed every time I watch your videos!! You are a true craftsman with a god given talent! Keep the content coming please.

@R0gue6729 Жыл бұрын

I really appreciate your videos. The way you explain this stuff really clicks for me and you've made me a better carpenter without a doubt. Thank you

@jamiecurrie2028 2 жыл бұрын

This is exactly the kind of video that needs to be seen! Love learning from other people. I know that gut dropping expression, seen it, and lived it. Super recovery! Always say "there's no such thing as problems, only solutions"

@abdcontractingltd 2 жыл бұрын

I've been wanting to add a faux wood beam up in my vaulted ceiling on the living room for years, just didn't have the time or experience doing it. But this video will definitely be the one I refer to!

@jonathanochoa3768 2 жыл бұрын

you can tell that you are a true craftsman. I really appreciate these videos.

@TheSkitd 2 жыл бұрын

This is perfect timing. I really appreciate this video as it is exactly what I need to pull this off. I'm going to make some floating shelves in my living room above the bar. i have every tool you used in this video including a 118" Makita track. Your already proven technique will make things go much more smoothly. I wasn't even searching for something like this, it just appeared in my recommended videos, although I am a subscriber. Thank you very much.

@customcal1 2 жыл бұрын

Attention to detail. The quality of your work is amazing. Nice job. I’m new to your channel and probably twice your age and every time I watch one of these videos I learn something.

@TheFunnyCarpenter 2 жыл бұрын

Great techniques mate

@edl1957 Жыл бұрын

Very much appreciate all of the details and tips. I just completed some box beams for a vaulted ceiling using a number of techniques that you described, and they have turned out great.

@dirkg7062 2 жыл бұрын

Great job! I've been watching your videos for awhile now and I've learned a lot from you. You are a very good finish carpenter.

@paulramirez7792 Жыл бұрын

Love the level of detail you go into

@fattony4lyf 2 жыл бұрын

Thanks for the ideas boss man. You are improving me and everybody else that watches your Chanel. Thank you.

@mariocarreiro6946 2 жыл бұрын

Thank you for sharing ..... the way you explain things is so refreshing & straight forward. You are true Master at you craft & just want to say thank you for your videos & teachings.

@anthonyhayes3341 Жыл бұрын

Just used your process for the first time. Worked out beautifully! Thx fpr all the information you share

@mootrevo Жыл бұрын

Great video and thanks for sharing your thoughtful approach to finish carpentry and for taking the time to share your amazing skill set.

@kiwdwks 2 жыл бұрын

Always amazed what you do on-site. Again, your videos are always a must see...thanks!

@kevinlavigne9931 2 жыл бұрын

I love all the tips and tricks in this video but I especially love the golf glove tan! Work hard, play hard!

@InsiderCarpentry 2 жыл бұрын

Amen brother!

@timcoulter7016 2 жыл бұрын

Just completed my first mitred pieces using tape. Worked great. Thanks for the great tip

@Christopher-pf8qt 2 жыл бұрын

Without any doubt this is the best video on long bevel glue joints.

@jadams2013 2 жыл бұрын

Outstanding video! Thanks man. I admire people who know what they're doing.

@hugavet3049 5 ай бұрын

The mill in my area will run a "lock-mitre" profile for you. They snap together.

@tc9148 2 жыл бұрын

Fun to watch. Superb craftsmanship!!!

@gregcrouse5560 2 жыл бұрын

Always a joy to see your work !

@Againstthegrainwoodworks Жыл бұрын

Good tips! I like the idea of burninshing corners while the glue is wet, I will definitely put that to use.

@Maurice510 2 жыл бұрын

Awesome, just awesome. I learn something every time I see one of your videos. Thank you for sharing this knowledge.

@juanc.mendoza632 2 жыл бұрын

Thank you Spencer like always in your videos you master carpentry shine. Hi! From Easton Maryland.

@robwright3064 2 жыл бұрын

Subscriber count is really growing! Great info as always.

@robertarmitage8709 2 жыл бұрын

always inspired. where were you 50 years ago when I needed you?

@jgraeff1 2 жыл бұрын

Always learn something from your videos, thank you!

@texascraftsman7215 2 жыл бұрын

Love the shinwa Chalk lines

@JohnWayne-rk3dq Жыл бұрын

Need to see the install!

@Cousin.Justin 2 жыл бұрын

*Welcome Back* 👍🏻 🙌🏻

@1969ironmike Жыл бұрын

This is a great video ! I learned a lot from lots of your videos! Keep up the great work bud!!

@mikeinmaryland 2 жыл бұрын

Another great video by the Lone Ranger. That said, with all the cordless tools you have or that you’re switching too, you never picked up the rips off the floor, instead you continued to walk over them. If you work alone, you don’t want to trip and fall alone. To quote you, Don’t ask me how I know. Keep up the great work, stay safe.

@zephyr1408 2 жыл бұрын

Thank You Spencer for the video! I do not hv much experience with these however, I am not afraid to try (maybe not a 14” out of the starting gate but an 8 or 10” ? I learned being a good finish carpenter means a problem solver! I really enjoy my chosen craft! Thank you again Spencer ! Keep ‘em coming buddy and I will clear space in my head for em! Kings Table Custom Finish Carpentry Over & Out!

@bighaasfly Жыл бұрын

You savvy boy! Look at you go. Nice work!

@duncorp1 2 жыл бұрын

Great video Lewis, I’ve just purchased the festool tsc great tool very impressed with the power.looking forward too the next video

@scottfeenstra4322 2 жыл бұрын

Great content once again. The sanding trick looks mint, I'll have to try that next time. One thing I like to do differently is to make the bottom piece of the beam the exact width of my track, and adjust the width of the mounting board on the ceiling to match. I find it quicker, more consistent, and simpler than measuring each board.

@dickdoc3337 2 жыл бұрын

Clever Lad Spencer well done astounding work in many shapes and forms .....

@michaelwangler486 2 жыл бұрын

Great work, especially on site. A j-roller really helps the tape grab better. Also, the dip angle of 45.5 is critical. I know you have mentioned that angle in other videos, and it really makes a big difference. Thanks for sharing

@geoffreyyoung5419 2 жыл бұрын

Another fantastic job.

@highvalleyconst 2 жыл бұрын

Great Video as always

@jaredmoore9213 2 жыл бұрын

The beams look great! Not sure why anyone would give you a thumbs down. This is how I build my box beams too, only difference is I use gorilla tape to hold the joints during glue up.

@bffaris 2 жыл бұрын

Dude you are way wiser than your age. You are a very talented craftsman. More than that you are very intelligent. You have a lucky family. Hope to meet some day in Fort Wayne.

@TWC6724 2 жыл бұрын

You have such a gift my friend.

@jamesellis7677 2 жыл бұрын

Beautiful job !

@JoDoDesigns2011 2 жыл бұрын

Always enjoy your videos, and the why you explain everything, very professional. 😁

@InsiderCarpentry 2 жыл бұрын

Glad you like them!

@stultsn 2 жыл бұрын

Great video man love the channel

@rodpotts2666 2 жыл бұрын

That is a beautiful thing!!

@bparker5709 2 жыл бұрын

Look at the tan line on that golf* hand! Quality video man!

@daburg11 2 жыл бұрын

Frigging perfection!

@johnnyutah1053 2 жыл бұрын

Great video!

@kleincarpentry1438 2 жыл бұрын

Be sure and drop the glue right underneath where you are working, so you can step in it and have it stuck to the bottom of your shoe. Love it! ((=

@christophercrawford2736 2 жыл бұрын

I had a feeling that the floating desk I built for my sister wasn’t going great because I was using my job site tablesaw instead of a track saw. Around five minutes in what you mentioned has convinced me that I need to get a track saw. And I’ve been leaning towards the Dewalt one because I have all the batteries for the 20 V and FlexVolt stuff. I currently don’t really do any carpentry in my business though.

@hansangb 2 жыл бұрын

@11:50 Something as simple as a chalk line for tracksaw. Now why didn't I think of that. And I see what you mean about your chalkline being better because of the builtin pin!

@javierflores4567 5 ай бұрын

Wright on brow 🎉 Excellent explanation 🎉

@coppulor6500 9 ай бұрын

badass. I subscribe to a channel maybe once a year or two these days. the way you explained all the deets.......subscribed. ✊

@paulfrederiksen5639 2 жыл бұрын

Thanks, that was quite useful.

@adamr1637 2 жыл бұрын

This is art.

@kbram7363 2 жыл бұрын

You’re a legend!

@PeakDogs67 2 жыл бұрын

Hey Spencer. Would love to see you do a version for wrapping a column, hiding a metal post.

@InsiderCarpentry 2 жыл бұрын

I have videos on columns further back. Same technique.

@iorewp Жыл бұрын

Great video....I can identify with dropping the glue so as to step in it!

@kimdevaney7465 2 жыл бұрын

Great video, Spencer! I appreciate your work and how you explain the process. Would having a few more sawhorses under there help keep the boards aligned?

@robertwelzbacher7114 5 ай бұрын

Well done

@javierescobedo4779 2 жыл бұрын

Just perfect 👍🏻

@davidgraham2673 2 жыл бұрын

Very nice video to learn from Kudos.

@knothead6436 2 жыл бұрын

Great instruction. I would love to work for.

@LuisSanchez-wf9zw 2 жыл бұрын

Thank you for showing this process. Do you have a video on how you price for labor on this finish carpentry? Would love to learn what is the best way to start and build a small side-hustle without breaking even on a job like this or being the least expensive carpenter on bidding jobs without charging enough. Any advice for a newbie, Spencer?

@Stefan_Kawalec 2 жыл бұрын

Spencer, you definitely need a Festool cyclone dust separator. BTW all you recent videos have very high teaching value. You're doing a great job.

@dickflow3641 2 жыл бұрын

Great job, a difficult one with only two hands.

@manuelmejia9907 2 жыл бұрын

thanks a lot for sharing your videos

@mykolashatkovskyi8817 2 жыл бұрын

Maaan, you ARE a god of miters!

@thomasalison6188 2 жыл бұрын

Nice job! White Oak can get splinter along the mitered edge, so a bit more of a challenge to close up the joint. Also Mohawk Burnt Umber epoxy putty is an excellent option to use on nail holes, & gaps for White Oak, in blends in very well!!

@InsiderCarpentry 2 жыл бұрын

It really does...that is one advantage of using a table saw, the blade is pulling down so much less splintering.

@GaryGold Жыл бұрын

You have golden hands!

@davesch1512 2 жыл бұрын

Great video! I liked the dropping glue under your feet part How many times have we all done it !! Had to do box beams in basement 26’ long had to build them in place. If you can pre build it do it guy!

@TheAxecutioner 2 жыл бұрын

freakin wonderful work

@michaelcaraway7567 2 жыл бұрын

Milwaukee 23 gauge” What is your opinion on it? I’ve been thinking of getting it… You are a excellent teacher thank you for providing continuing education for finish carpenters!

@jeffhowden9326 2 жыл бұрын

One additional tip that wasn't mentioned and that's to make sure the flow of the grain on the bottom and two sides is all in the same direction. Notice @20:00 the direction on the sides is the same, but the bottom is in the opposite direction. An observant eye will pick this up and it won't look like the pieces "grew together".