Mitering J Channel | Watertight

No video

Mitering J Channel | Watertight

Рет қаралды 73,475

Күн бұрын

Mitering J Channel | Watertight
A video about cutting vinyl j channel for mitered corners making them watertight. This is the first in a new playlist on remodeling/construction diy projects.
*Click here to SUBSCRIBE*
/ homesteadingways
Thanks for watching!
*********************************************************************
To see the products we use at our cabin or recommend in our videos click this link! www.amazon.com...
*********************************************************************
Getting mail is WONDERFUL! If you'd like to send something here is the address :)
Vail/Homesteading Ways
15300 W. Howard Ave.
PO Box 511061
New Berlin, WI 53151
***********************************************************
Social Media Links!
Facebook Group
/ 141206119368406
Instgram
/ homesteadingways
*****************************************************************
Want to help support the channel FOR FREE?
Shop from any of the affiliate links. If you make a purchase within 24 hours of clicking, we get a small commission NO MATTER WHAT YOU BUY and it helps us to be able to continue making these videos :)

Пікірлер: 19

@acediy2234 4 жыл бұрын

100% sensible and waterproof indeed. the overlap and continuous run is key. thanks

@jtdplayz2650 4 жыл бұрын

Thank you for this video Paul, I did vinyl siding on my home for the first time and this method made it easy it looks good! I wanted miters on the corners but didn't know how to go about it.

@leafinitup1 5 жыл бұрын

This was a very helpful video. I’m very sorry for your loss. God bless.

@kristieandjeff2720 3 жыл бұрын

Excellent video, my husband is currently installing this on our home and this video was a huge help. Thank you for sharing! 😃👍

@frankbullitt4556 2 жыл бұрын

very cool

@deankirkman7753 4 жыл бұрын

Sorry to hear about that-very sorry for your loss

@johnnybarbar7435 4 жыл бұрын

I can't see an advantage to doing this vs cutting the mitered face of the trim and a making a simple tab that factory installation instructions show. Leaving the nailing flange and most of the face on the bent tab only serves to stiffen the tab and prevent water from getting behind the tab's middle and lower section, which is not needed. The water entry path is at each end of the bend itself and some water can still enter at the edges of the tab's bend using either method. That's why proper house wrap installation and window flashings are critical before starting a siding job.

@thomasallen6889 5 жыл бұрын

Sorry to hear for your loss, I learned something today

@HomesteadingWays 5 жыл бұрын

Thank you. I know he would've been glad to know he could help.

@patrickalbright7068 4 жыл бұрын

Well done sir very good explanation as well as great pointers. Not typically the way I j but definitely will keep this in mind

@michaelmarciona6497 2 жыл бұрын

You should leave the Face Of side pieces squared on top and just 45 the sides of top piece gives u a tighter miter

@riderdie3143 2 жыл бұрын

Not only a tighter fit but when it gets cold and shrinks, it won’t as noticeable of a gap…and if ur doing this for a living ur not doing all this anyway, it would take to long and really it’s overkill IMO….make em all 1” longer and then put ur water tabs on the bottom sides and top and nail it to the wall 🤯

@douglash7304 3 жыл бұрын

Can you do a video of a shortcut how to put a different color J channel on top of existing J channel for a contrasting window trim look thank you

@nunyabeezwax1712 4 жыл бұрын

yeah, i couldn't watch your belly, while you did your thing above the camera.... thanks though.

@ancientpersianempire 4 жыл бұрын

great info but im a super fan of hardi plank. everything is sealed, there is no guessing or etc

@Mazel_Tov_888 4 жыл бұрын

i thought j channel was a knuckle dragger activity, boy was i wrong. i'm trying to j channel around a exhaust fan i installed, it is wupping my rear. i was trying to frame it like a door, no go buddy boy.

@electech_5495 3 жыл бұрын

This is a good idea, but for me just way too much work! I would rather spend more time with siding tape and paper and properly setting tabs is easier for me

@st1ch3s38 6 жыл бұрын

i always sucked at window trim =D

@wallyevans4228 Жыл бұрын

If I may respectfully say…it’s extremely difficult to see the step by step instructions for a novice. It may be the best how to video but confused on how to do it. Sorry