After several miter box "how to" videos, finally I found yours which is a true "how to" demonstration. Yours shows the box construction up close and also shows how to use it up close, so I can see exactly how you use each slot. Now I know how to use a miter box. Thank you!

Great explanation of how to use a mitre box (and why I need one ha!)

This is actually a really good video on how to use one. That’s all I have for now and it intimidated me for the longest time but now I’m totally game to use it. Thanks.

I'm starting a DIY project and don't have any power tools. Learned a lot from your video! Thanks for the information!

Thanks for this video perfect demonstration and good pointers! 👏🏼👏🏼

This video was awesome! Very informative. Hubby wouldn’t dare let me get a power mitre saw. This I can do. Thank you for the great video. I learned a lot.

This is a really well done tutorial

Best description on how to use a mitre box I've seen 👍

I actually used a Japanese quick cut saw to do a lot of my mitre cuts....BUT....It didn't occur to me to put a piece of wood under my molding first...because I eventually cut my mitre box in Half!!! Simple common sense teaching, excellent thank you!

An extraordinary video! Love the demonstration

Been using that tool for 6 yrs, and I was today old when finding out how those work. Lol. Best Mitre box video. :)

You are an awesome teacher! Thank you so much. I had no idea the design of the miter box was so deliberate.

I finally learned how to use one thanks for sharing 👍

Thank you for your video, it helped my wife and I out!

Thank you for posting. Clear and simple to understand.

You were so detailed about everything!! Thank you for that. Explain everything clearly!

thank you so much. I had no idea how to use this. Great instructions.

Thank you what a difference a good teacher makes 👍

Great video and very informative! I need to pick one up this week so glad I found your video because you mentioned something I wouldn't have thought about and that is the clamps because I'll need them as well. Tracey

Amazing demo, thank you!

I learned a lot from you today. You’re a great teacher teacher. Thank you 🙏🏾

Thanks so much for such a thorough and simple explanation with your excellent simplification and attention to all details. Bless you.

Thank you for this excellent tutorial on the use of a miter box

Excellent video! You're a great teacher -- we have power tools but I wanted something for my smaller craft projects. Thanks again!

Great video, super articulate and love how you covered the design.

Thank you. Watching your video answered the one question the other 5 videos I watched didn't. 👍

Excellent video and very informative. I like the way you stay on subject and are well organized. You don't waste any time, but give us lots of information within an appropriate length of time! I was trying to decide which brand of miter box to buy and this really helped me to make a decision. Thanks again.

Thank you!!! Your demonstration was perfect.

Great video!! Very clear explanation. You’re an excellent instructor!!

Great video, thanks.

Very detailed. Great video!!

Well done sir and just what I have been searching for!

Great job. I learned something today

Great video, man! Exactly what I needed.

Thanks for the lesson.

I have that same mitre box and it’s gotten lots of good use. Enjoying your videos. New sub 🙂

Really helpful video! Thank you!

Great video, I learned a lot from your video!

Very helpful, thanks!

Perfect Video! Thanks very much.

Super informative! 👍👍👍👍

Excellent! Thank you.

you are so great at explaining!! I subscribed to you

Very informative and interesting. Thanks

Thanks for the how to!!!!

Great video. Thanks

Great video. Thank you

Thank you, very helpful!😀

Very helpful!

Hi There....This was super helpful thank you!

Fabulous - thank you very much. You were so clear, concise and made learning enjoyable. I'm obsessed with DIY and have just purchased an SDS Plus Rotary Hammer Drill as every wall I need to infiltrate is old tough concrete which my ordinary hammer drill could not cope with. I am small and the drill is exrremely heavy, so I really have to hold on to the drill tightly to ensure my whole body doesn't spin around and around - rather than the drill turning in the wall 😂🤦🏽‍♀- though I'm sure that would go viral 😂🤦🏽‍♀. Thanks again. Psyche aka Psyche Thompson UK 🌹

Thanks very informative 👍🏿

Nice one

wow I used this all wrong and I blame that on art school lol! I did make cuts though...just completely different. I will be using the 45º angles so this was helpful. Thanks for going into detail and explaining and showing all of the angles. This was very helpful.

Thank you ! Thank you 👍👍👍👍

Thank you🙏🏽 So much.

Wonderful 👍 I wish I didn't throw them out 😕 thanks for the informative video now we know we're looking at each other laughing we couldn't figure out what that was for we brought the wood and everything came out awesome again thank you thank you 👍🙏

really nice review. i just got a hyper tough from walmart. it doesn’t have cam pins, holes, clamp flaps, or the 22.5, but still not bad for 10.00.

Awesome

Thanks 👌

Planning to change my baseboards and this tool is wonderful (just a rectangle powder room), any advice on how to mark the 45 angle cut on the board?

Excellent video, will buy one tomorrow. Would you recommend another saw to use or should we stick with this one. Going to be using it on 2x2's to make a slat pullout bed.

Good 👍👍👍

Hey! My mintre box does not come with holes to attach campins. Is there a way I can clamp both the box and wood to the desk. If yes, would I need a G/C clamp or Quick Grip Bar clamps?

I just want to put some chair rail in my dining room. I understand all the concepts but just don’t have the guts to use the big miter saw. The miter box seems the way to go for me.

If possible, you should own both. There was a time when all there was, was a miter box or an industrial table saw.

That first cut I did as well and it made so much noise rubbing against the housing. Do you recommend any lubricant to help with the sound?

You want to place the wood against the fence farthest from you, not like you see here. You don't want the pushing force of the saw against those little plastic pins, you want the fence to carry that load. Plus it'll help reduce "tear out" if the work piece is supported by the fence.

How do you mitre a molding that is taller than the mitre box?

🤣 This is hilarious!

you whole workbench shakes when you cut (!) Astonishing that this is a tools channel!!! - first thing you need as a good carpenter is a proper workbench

how accurate is the 45° have you tested it by making a box

Video is nice, wood is cutting, but what about mitre box, is it durable? and saw doesn't cut plastic mitre box, please reply me /

Hello, I would like to know what's the best way to cut multiple angles. I need 15° cut. I don't want a table saw only doing arts and crafts. I'm making a suspension bridge. Thanks in advanced

Question - how thick is that trim? You cut it fast but it still seems like it would take a decent amount of time and muscles. I looking for something like this to cut small 2" x 3/4" or even 1/2", because my miter saw ends up ripping some of the wood edge even if I tape it first. But I don't want to be sawing all day long to make a couple frames.

I'm starting a DIY project how can i buy this tool ....

I learned something today! I’m leery of power saws but I’m pretty patient with a regular saw. I’ll be buying a mitre box and saw tomorrow for a project I am working on. Thanks for the informative video.

Why no affiliate links to the gear you used? Every little bit counts $$$

DO NOT compromise your 🤲😵😳🤯

I bought this and it did not work for my project. Remember to check the with of the wood that you are cutting.