Mitsubishi triton 2018 how to change front and rear brakes 4n15 step by step

Рет қаралды 26,668

Driftcarsjp

2 жыл бұрын

Mitsubishi triton 2018 4n15 front and rear brakes how to step by step.

Пікірлер: 67

@tootsielucas9393 3 ай бұрын

As a women watching this and trying to change her own brake pads. Thank you so much 🙏🏾🙏🏾

@mhobson1126 Жыл бұрын

That was a brilliant video mate. Very clear instructions, step by step, no bells and whistles. It gives someone with no experience the confidence to do it give it a try. Keep up the great work.

@SpikyGussy1 4 ай бұрын

Just did front and rear brakes on my 2016 Triton. Couldn’t have done it without your brilliant, easy to follow video. Many thanks, really appreciated.

@TehBr0 Жыл бұрын

Another excellent video, this will save money for so many people, your ability to instruct viewers is tip top.

@marcjcapetown Жыл бұрын

You legend! Was just quoted R2100 for the front pads alone, bought some Bosch pads for R600 and will fit them myself. I'd better check the rear pads too, the jury's out on whether I'll tackle those, I'm guessing you kept the swearing in check for the video, while doing those!

@adambartley7740 2 жыл бұрын

Thanks mate you made the job so much easier then i thought it would be

@jackiihope9108 Жыл бұрын

Thanks mate you uave helped me out of a pickle with my ute I'm binge watching your triton videos to make sure I no it for when it happens now thankyou very much top clear video

@mitcho8666 4 ай бұрын

Great video. Thanks heaps mate helped me a lot

@Gary-vz2fk 2 жыл бұрын

Well done! Clear instructions and it is a lots easier than I thought!

@pearsemcbride 3 ай бұрын

Excellent video clear and easy to follow . Just wish my calliper piston pushed back as easily as yours 😂

@brettbates552 6 ай бұрын

Thanks for this video mate. Your clear instructions made the process so easy. Can I add 1 thing though? If your drums are stuck on and can’t be wiggled off by hand, there’s 2 threaded holes that you can used to put bolts in and pop the drum off.

@ratapotamus 8 ай бұрын

I figured it would be this easy to change the front pads but thanks for confirming it mate 🤘

@user-oz4vv1wl2e 5 ай бұрын

Great video. Thanks.

@redenciomarcojos3806 2 жыл бұрын

Thanks for this very clear tutorial.

@salvadormartinezderituerto1909 Жыл бұрын

Thanks from Spain. Very good videos, very good explained 😊

@frankm4120 Жыл бұрын

thank god for You Tube, thanks for a detailed video, it is easier than I thought

@petersutton2182 7 ай бұрын

This should save me a few $$$, a BIG thanks 🙂

@Kissmeshitfacedd 2 жыл бұрын

brillaint you've brought this out just as mine need doing! i've got a series 4 but i'd imagine its the same! Thanks for the Easy to Follow Video!

@saliyagurusinghe7148 2 жыл бұрын

Excellent video thank you. Just a minor edit, the engine in the MQ and MR is 4N15

@gregcapel6990 Жыл бұрын

Appreciate the vid, done heaps of disk breaks, but never had to do hub brakes, wasnt to bad, except i had to replace the small washer (you can get them from repco)

@mattnorton958 2 жыл бұрын

Great video mate! Will attempt to do this to my MQ with your help! Cheers! 👍🏻

@truetierra 2 жыл бұрын

Great video mate, many thanks. Would love to see a front brake rotor change on the MQ at some stage. Cheers. 👍

@colindiver8156 2 ай бұрын

Love it mate! Thanks just did mine came up a treat luv the vid thanks heaps saved me a bunch of money

@shaneoconnell2849 2 жыл бұрын

Awesome video mate, thanks for all the detail 👍

@Naxas100 2 жыл бұрын

Thanks for the video mate! Well done

@DiHandley 2 жыл бұрын

Hey thanks for this! Brilliant video and easy to follow. I’m glad I subbed when I did! Cheers

@NumanAir Жыл бұрын

Thanks for this. I just did both front and rear brakes on my 2018 Triton. Drum brakes are fiddly had your clip playing as I was doing it. Great instructions. Any chance of a serpentine and alternator belt replacement 😊

@saulataani5861 8 ай бұрын

I agree would be great!

@petewilliams4289 2 жыл бұрын

Excellent video, great explanation and details, thanks.

@alexismichael854 11 ай бұрын

Great video and very helpful keep posting

@rastislavzrelak9238 2 жыл бұрын

good video, I did front ones few times but I reckon back ones are next, thanks

@kelvinmoffatt Жыл бұрын

Wow, front's easier than I thought. I think I'll do it myself.

@RK.7796 Жыл бұрын

Thank you for your video. So good.

@glenn8986 5 ай бұрын

Mitsubishi quoted me $987 for front rotors and pads fitted.

@RyanCowley86 10 ай бұрын

Absolute legend. Thanks so much

@avedis4227 2 жыл бұрын

Excellent tutorial mate. Would love to see a gear box service on this model.

@enriqueramirezs5360 10 ай бұрын

EXCELLENT VIDEO, GREETINGS FROM MEXICO!!!

@lovelyhurlin6494 2 жыл бұрын

Awesome mate. Thank you.

@rogercampbells5651 Жыл бұрын

thanks mate good presentation

@Yhf6649 2 жыл бұрын

Fantastic,thanks

@jackrussellrambo5547 Жыл бұрын

U sir are a ledge bro big greetings from 🇮🇪

@andrenarbey3569 2 ай бұрын

Great tips for the piston

@lancegraham7722 Жыл бұрын

Thank you

@Trevwhitesailing 2 жыл бұрын

You have an excellent instructional style, nice work mate.

@irwanmashadi7515 Жыл бұрын

Nice job. Can help to make video for changing rocker gasket cover full set. Thanks mate!

@RichieRich845 6 ай бұрын

13:22 that little clip is $20. each from Mitsubishi. Can they make it any smaller?

@RoDeCaM 2 жыл бұрын

Can you make a video for adjust the hand brake!?

@mathewfoley1531 9 ай бұрын

Only problem with pushing piston back is old oil going back up the line with crap in it better to undo bleeder nipple and push back and suck old brake fluid out of master cylinder and put new fluid through system

@toddc5451 Жыл бұрын

Do you have to remove the cap on the brake reservoir before pushing in the brake piston?

@driftcarsjp Жыл бұрын

@adamcawthorne 6 ай бұрын

Great video, thanks for sharing. Q. Did you have to top up the brake fluid once the job was complete? My brake pedal is very spongy. It builds pressure, but then fades away. Can you help? Cheers Adam

@driftcarsjp 6 ай бұрын

Hi have you adjusted the brake shoes enough? Is the handbrake tight or come up a long way before locking on the brakes?

@adamcawthorne 6 ай бұрын

@@driftcarsjp All good, I’ve sorted it. Just needed to top up the fluid, and bleed the lines abit 👍🏽.

@123rhianon Жыл бұрын

When u say put the car out of gear does that mean park as well

@driftcarsjp Жыл бұрын

Yep have the car in neural.

@junetijam1670 2 жыл бұрын

how many turns you adjust the break adjuster?

@driftcarsjp 2 жыл бұрын

Until it locks up the brakes. You won't be able to turn it any more then you back off about 2 turns.

@mrsamirg 2 жыл бұрын

Hi mate what was the part number for the Bendix brakes for your triton? I have the same model. Cheers mate.

@driftcarsjp 2 жыл бұрын

Ill find out next time I see my mate...

@craigmountain5100 2 жыл бұрын

Would you mind running through a alternator belt replacement I can’t work out how to release the tension with the tensioner

@angusfindlater 2 жыл бұрын

Look inside the left hand side wheel guard and remove flimsy rubber skirt/flap and you can see an adjuster to slacken off. First you need to loosen the tensioner pulley center nut on face of pulley or the adjuster bolt will not move and the thread on the adjuster nut will get damaged. Take note of the belt route too.

@craigmountain5100 2 жыл бұрын

@@angusfindlater hi yes i think ive sussed it. Remove the first belt like you say then a 14 mm spanner on the tensioner on the second belt and with a bar turn the bolt in the middle of the tensioner wheel anticlockwise and the belt becomes loose. Am i right?

@craigmountain5100 2 жыл бұрын

@@angusfindlater to remove the fan belt

@angusfindlater 2 жыл бұрын

@@craigmountain5100 yes. Cant remember which way to crank the main belt tensioner as i was under the vehicle. It only goes one way though. One more thing.... use locktite on the second belt pulley nut once you have retensioned. I found mine became loose again after a while

@craigmountain5100 2 жыл бұрын

@@angusfindlater thanks findlater, it doesnt feel right turning the nut anti clockwise almost as if you will unscrew the nut before loosening the tension but as you say it will only go one way. I havent actually gone as far as removing it but the belt goes slack so i think thats it