Mule 2510 Test Drive After Repairs

Рет қаралды 5,565

MJM’s Workshop

5 жыл бұрын

Let's take the Mule for a test drive and see how it runs now that both cylinders are working.

Пікірлер: 22

@razor5385 3 жыл бұрын

Nice, I recently replaced the started motor in my mule 2510 and it runs fine now

@mjmcomputers 3 жыл бұрын

Great machines.

@tumbleweedfarm 5 жыл бұрын

Nice! I've been following your videos lately. I just finished converting my old 2510 to a mechanical fuel pump. I replaced the factory fuel tank with a spun aluminum tank. So far, this has fixed most of the problems, but I still need to do the brakes. I'm looking forward to seeing you do that! Thanks!

@mjmcomputers 5 жыл бұрын

What fuel pump and fuel tank did you use? Still trying to get all the rust out of my fuel tank.

@tumbleweedfarm 5 жыл бұрын

@@mjmcomputers Fuel tank: www.amazon.com/gp/product/B075FGDT1M/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

@tumbleweedfarm 5 жыл бұрын

@@mjmcomputers Fuel pump: www.amazon.com/gp/product/B000GTV9AK/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

@tumbleweedfarm 5 жыл бұрын

@@mjmcomputers The tank shown in the pic has a cap toward the end. The tank I received actually has a center mounted fill cap. This worked better than the end mount fill cap. I'll make a video to show details and post a link.

@Pleb1 3 жыл бұрын

What is the difference between the petrol and diesel torque converters? Can the petrol converter be used on the diesel to get a lower ratio and more torque while reducing top end?

@mjmcomputers 3 жыл бұрын

I’m not sure if there is a difference and if there is what the difference is. I can’t see the diesel being geared lower and giving you more torque though. I’d assume they are either the same or geared higher since the diesel may not rev as high.

@ryanadamsamazing 5 ай бұрын

Did you do a vid on on the ebrake

@connorthegreat6592 2 жыл бұрын

Congrats! Btw I have one of these and it doesn’t seems to be moving slower than it should. Do you have any ideas as to what could be causing this?

@mjmcomputers 2 жыл бұрын

Thanks, stuck in low range? The belt could be worn that will cause it to be slower. Mine was slow but it was only running on one cylinder.

@connorthegreat6592 2 жыл бұрын

@@mjmcomputers ok thanks. It is not stuck in low and I will check the belt. Thank you!!

@connorthegreat6592 2 жыл бұрын

@@mjmcomputers Also, what does the belt do?

@hopehibbard4967 5 жыл бұрын

What did you do to increase the power? You said the first time you fixed it that it was slow

@mjmcomputers 5 жыл бұрын

In a previous video I did a compression test and found 1 cylinder with 0 compression. I found 1 pushrod off and put it back and adjusted the valves.

@vtxchris1 4 жыл бұрын

how many hours you got on that rig.

@mjmcomputers 4 жыл бұрын

546

@tracylinder1376 3 жыл бұрын

I just ran across your channel and you have inspired me to start trying to get my 2500 running. I bought it 3 years ago from my sons best friend, the mom and dad got a divorce and it was in the moms garage .i kept bugging her about selling . And one day my sons friend said my mom wants to sell mule , he said she wants 300 dollars !!! I tried not to get too excited. Anyway ive had it for 3 years and i didnt know were to start . But watching you im starting on it 😁