MJX Hyper Go 14210 v2, H14BM Loaded With Alloy Upgrades And Mods. Desk Talk
Рет қаралды 12,026
Күн бұрынThis is my upgraded MJX Hyper GO 14210 v2 with all the aluminium parts fitted from www.seriousrc.co.uk
I also fitted steering upgrades and a metal gear servo from Aliexpress.
its lowered, with 500k silicone diff oil in both diffs, and has 15mm hub extensions.
I talk about setup, handling and body mods etc.
Thanks For Watching
@nickford7659 3 ай бұрын
My h14bm is getting a purple version of the metal alloy parts it looks great and can’t wait to bash around
@denisbouvier1489 4 ай бұрын
Used your plans and modded my body too. No more snow getting inside my important bits. Cheers!
@cheggers1973 4 ай бұрын
Mate!, I got a little Buzz reading that!.... You are the first and only to try as far as I know so far!... I'm glad that you confirmed that they can be made from watching this vid... I would love to see your version and how it turned out!, if you do Facebook, please join the MJX Hyper Go Owners UK Group and make a post showing your efforts!, I for one would love to see it!... I'll know you from the post, I'm Admin, and I'll make myself known to you!... There is more from me to see there too!.. Cheer's!, and thanks For watching and your kind comment! Sincerely,Keith.
@DrHyde-cq3eg 5 ай бұрын
Great looking rig. You done some nice work especially with that body. I recommend spraying it on the inside with Flex Seal to. Awesome job with this.
@-xirx- 4 ай бұрын
Subscribed for this content, cheers. Just bought an mjx as my first rc car and was looking through yt for info on upgrading it. 🙂👍
@cheggers1973 4 ай бұрын
Thank You for the nice comment chap!
@DaveSaysYesh 5 ай бұрын
Great video much appreciated! Some really interesting upgrades and tips 👌
@cheggers1973 5 ай бұрын
Thankyou Dave! that is really nice to read!
@DaveSaysYesh 5 ай бұрын
@cheggers1973 never seen anyone mod the bodyshell like that to keep the mud out, and using margarine tubs is genius ! The fact it makes the shell stronger too is a nice bonus Also loved how you removed the anodising with hot water and sink unblocked! And polished with autosol...came out looking amazing 👏
@cheggers1973 5 ай бұрын
@@DaveSaysYesh Thanks again for another great comment Chap!.. I`m really happy that you like my Margerine Tub mods haha, and the effort put into stripping and polishing..
@luvadealme 3 ай бұрын
Which brand margarine tubs are the best to start with? @@cheggers1973
@davidruiz6415 2 ай бұрын
🔥💯lotta information love it💯🔥
@sashac61 3 ай бұрын
Very helpful
@bryangadson-me9eh 5 ай бұрын
Nice work on truck and have to do my shell as well keep it clean
@cheggers1973 5 ай бұрын
Thanks Bro!, Yeah the Margarine tub upgrades work really good, you will be happy you spent the time doing it.👍
@user-dw4dq7el8h 4 ай бұрын
You're the best
@scottparish9156 3 ай бұрын
Great video mate, with some awesome tips your one looks mint. I have the same truggy and have added 15mm hub extenders like yours i have also got asjustable aluminium steering tie rod arms. I have just ordered the steering servo after seeing the video and link that you put on and will be getting the other aluminium steering linkages 😊. Keep up the awesome work and that car is a credit to you. Did you put up a video of how to strip the car to get to the diffs and was it easy
@cheggers1973 3 ай бұрын
Thanks for the kind comments Chap!, I'm glad your enjoying upgrading your Truggy like I have!, you wait till you see what I did to Him now, and what's coming next haha.. I didn't do a diff strip vid, it's not difficult, just remember where screws go. Thanks for watching!
@brandmedia-reklama 4 ай бұрын
Отличная работа. Возьму себе во внимание. Сделаю подобное и выложу раскрой деталей. Ещё раз спасибо за обзор.
@cheggers1973 4 ай бұрын
I'm sorry. I can't copy that to try and translate it.... So I have no idea what it says?....I hope it's nice! 😁
@brandmedia-reklama 4 ай бұрын
Great job. I'll take it into account. I'll do something similar and post the details. Thanks again for the review.
@cheggers1973 4 ай бұрын
@@brandmedia-reklama Thank you for your kind comment!, and thank you for the translation!... And Thanks For Watching!
@jaymechanic1228 3 ай бұрын
Great rig and video. Iv fitted the metal suspension arms , hubs front and rear after snapping the front hub. Now the front wheels have alot of negative camber. Would u say this is normal or possible an issue with the front upper arms . Or are they naturally cambered in?? I got the same aluminium parts as you. But my front wheels are in alot more then yours.
@manvendersinghrathore8340 2 ай бұрын
Is there any effect on speed ? Because of alloys
@quesadajeremy9273 2 ай бұрын
What about the balance plug rubbing the tire
@khai5922 Ай бұрын
You have any issue with stripped screw under the chasis? I noticed the screw material quite low quality
@grumpygrandpa3640 19 сағат бұрын
What wheel hex’s extender did you get ?
@t3floz 3 күн бұрын
Got a e revo 1/16 which I think is annoying to work on. Do you think the mjx is hard to work on? Do you think the traxxas esc would fit?
@philiprccars4340 5 ай бұрын
I don't know if you have the MJX 16207 3S as well, but the stock wheelie bar is a complete fail, just a slightly hard hit on either side and the screw holes on it are torn out. I figured out how to upgrade and modify this so that it does not happen. The same mod will also work for the MJX 14210 wheelie bar.
@cheggers1973 5 ай бұрын
I've not had my wheelie bar break or any problems with the screws yet on this Truggy. Possibly due to less crashes due to a lower setup..I'm sorry yours has failed on you chap!.
@philiprccars4340 5 ай бұрын
@@cheggers1973 The MJX 16207 wheelie bar is longer than the 14210 wheelie bar, so I am going to modify it with a piece of shock spring so that it can move in all four directions during future side impacts, but still be solid enough to help stop the buggy from doing too many standing backflips on 3S. In stock form it is just going to keep ripping the screw holes out and fall off. I think all the MJX 16207 owners have experienced that the 16207 wheelie bar in stock form was made to fail.
@jefftait4745 2 ай бұрын
What bearings are needed for inside the steering cups?
@cheggers1973 2 ай бұрын
It states exactly what bearings are needed in the owners manual.
@TallyhoScreams 2 ай бұрын
Did the upgrades help the squirrelly handling? I bet the weight keeps it from flipping as much.
@cheggers1973 2 ай бұрын
Everything I have done to it has improved it chap.
@quesadajeremy9273 2 ай бұрын
Mine has a really bad delay in thr transmitter gonna be the second upgrade my first was a drag bar made from carbon fiber
@yunusdesai2429 2 ай бұрын
Great video. How durable has the aluminum parts been for you for bashing?
@cheggers1973 2 ай бұрын
They are stronger due to being alloy.
@eastsider5199 4 ай бұрын
What do you lubricate the car with after washing
@cheggers1973 4 ай бұрын
i spray 3in1 oil on the moving bits, wipe with a cloth and then I spray WD40 on a 50mm paint brush and paint everything, the plastics love it and it looks brand new when it dry's off.. thanks For Watching!
@s33m3shine3FPV 4 ай бұрын
What servo is good for this? Im looking for a upgrade but mjx doesnt give specta on the srvo to know what after market will fix.
@cheggers1973 4 ай бұрын
kzfaq.info/get/bejne/mZ2VeJp8s9aUhIk.htmlsi=tfN0VKliypAXUvv6
@shawnstewart9191 3 ай бұрын
Would you be willing to do a parts list? And I noticed you didn't mention what servo, steering your using for the new tires.
@cheggers1973 3 ай бұрын
The servo upgrades have their own vid chap. kzfaq.info/get/bejne/mZ2VeJp8s9aUhIk.htmlsi=6fJVIiq5qOxMLJ3K Thanks For Watching!
@treb1395 Ай бұрын
where can i buy the front lower bumper?
@cheggers1973 Ай бұрын
It was made by me from alloy tube.
@orbitaljellyfish808 5 ай бұрын
Which extensions are those? (Don’t 1/10 scale cars have bigger axle threads?) Did they require any drilling of wheels? Car is awesome great job and thanks for the details 👏👏
@cheggers1973 5 ай бұрын
Thank you for your kind comment Chap!... the extension are the common type with a 12mm hex, I brough the 15mm ones in red.. I'll dig out the eBay link, if your not in the UK,you should have no problem finding some near you.. you do have to be sure you really want them because you are correct, the wheels need drilling to 5mm..or 4.5mm for a push in snug fit. Thanks for watching! This is a link to the ones I brought. www.ebay.co.uk/itm/394008417949?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=FGuy7wMHQGC&sssrc=4429486&ssuid=6T6KsFniTvK&var=&widget_ver=artemis&media=COPY
@orbitaljellyfish808 5 ай бұрын
@@cheggers1973 right on thanks good sir!
@cheggers1973 5 ай бұрын
@@orbitaljellyfish808 you are very welcome!.
@skylinecollector 5 ай бұрын
So I have white litium grease and I also have red n tacky automotive grease. Should I use either one of those in the diff to give it some lock up?
@cheggers1973 5 ай бұрын
Yes chap, fill the diffs with the Red Tacky Grease, and the outer gear, it gives a noticeable stability in the diff and translates to better forward drive, and more grip and traction when it's leaning over cornering... my friend Wilf, has his diffs full of grease..it's better than mine on solid surfaces...and better than it was on loose surfaces.. mine with 500k silicone oil in my diffs makes it a bit of a handful on tarmac and the like...it wants to drift.. which I like.. hope that helps Chap!
@skylinecollector 5 ай бұрын
@@cheggers1973 awesome thank you. In the video you described exactly what I want to fix about the truck. I'm thinking I should fill the front diff with something lighter to allow it some extra slip so it still turns pretty good. Would the lithium grease be good for that kind of setup?
@cheggers1973 5 ай бұрын
@@skylinecollector the Red grease is not thick enough to worry about modifying front or rear... it will handle lovely with grease in both chap... I may return to that setup in the future, it's a good mod that's a all-rounder.. less spin on the inside,unloaded wheel,better drift,better straight line with no apparent detriment to steering.. pack em full chap...
@donmistral 5 ай бұрын
What shock absorbers did you use ? Can you send me the link ?
@cheggers1973 5 ай бұрын
Standard shocks..
@wouldstock1 5 ай бұрын
Where did you get the aluminum steering linkages, and do you have a part number for them. My stock ones failed, and can only find the plastic ones.
@cheggers1973 5 ай бұрын
These are the steering pushrods if that's what you mean..... Just found this amazing item on AliExpress. Check it out! ￡2.54 | 2pcs Metal Front Steering Rod Steering Links For MJX H16 16207 16208 16209 16210 1/16 RC Car Upgrades Parts Accessories a.aliexpress.com/_EuAjbjT These are the steering parts.... Just found this amazing item on AliExpress. Check it out! ￡4.45 8%OFF | MJX 14209 14210 Rc Car Parts All Metal Directional Component Bearing Version OP Upgraded Parts, Modified Model Accessories a.aliexpress.com/_EuHYG1j
@wouldstock1 5 ай бұрын
@@cheggers1973 Nice. Thanks! I think I found similar ones, but they looked like they were for the 1/16 scale versions, so I wasn't sure they would work.
@cheggers1973 5 ай бұрын
@@wouldstock1 No probs Chap... those ones linked, definitely will fit!, and improve the slop. I just noticed they say 1/16 but don't worry, they are in there adjustments range. Thanks for Watching!
@wouldstock1 5 ай бұрын
@@cheggers1973 Right on!
@cheggers1973 5 ай бұрын
@@wouldstock1 I sincerely Dig That saying Man haha...
@feverexplosion1968 5 ай бұрын
What front arms do you use and can you send me the link
@cheggers1973 5 ай бұрын
This is a link to all MJX Hyper Go 14210 parts included the alloy ones... From www.seriousrc.co.uk www.seriousrc.co.uk/collections/mjx-hyper-go-14210-truck-spare-parts-and-upgrades
@stevestevens9780 3 ай бұрын
Nice vid, great info there! Do you have a link or part number for the servo?
@cheggers1973 3 ай бұрын
Cheers!, it's the JMRC metal gear one.. if you type MJX Hyper Go 14210 upgrade parts in AliExpress you will see it amongst other wonderful things haha.
@danielking5246 5 ай бұрын
Did you see a decrease in travel after installing the AL arms/linkages
@cheggers1973 5 ай бұрын
The travel is the same as it was chap!
@DanK-Mtb 5 ай бұрын
Weird, I just installed the AL parts and the travel seems significantly less 🤔
@danielking5246 5 ай бұрын
also did you add the firming coils of the shocks ? or just removed the blackness from the OEM coils ?
@cheggers1973 5 ай бұрын
@@danielking5246 I used the stiffer chrome springs that came in the spares pack.
@stevenfarraway 4 ай бұрын
@@DanK-Mtb same with me on mine. The A arms hit the shock tower at full travel...
@itzredo8912 5 ай бұрын
What servo did you install?
@cheggers1973 5 ай бұрын
Just found this amazing item on AliExpress. Check it out! ￡8.89 | MJX Hyper Go RC Car 14209 14210 Replacement Accessories 3 Wires Upgrade Digital Metal Servo Spare Parts a.aliexpress.com/_EuJgzj7
@manvendersinghrathore8340 2 ай бұрын
Is there any speed difference between between 14201 and the 14Bm the newer and the older plz reply i got the old one is there any difference and are boht tha car durable ?
@cheggers1973 2 ай бұрын
If you mean the 14210 and the H14BM, they are the same speed same car apart from slightly different shell and the H14BM has a slow mode,eco mode.. the 14210 comes in full power mode..
@manvendersinghrathore8340 2 ай бұрын
@@cheggers1973 ok thanks for replying just one question more is it durable? Its much first rc the 14210 i will use it with car and I’ll do a very little bit bashing so is it durable enough for that?
@cheggers1973 2 ай бұрын
@@manvendersinghrathore8340 it doesn't matter what I say in terms of durability, there is no measure.... Everything can break.
@mussietube9909 Ай бұрын
What to do for more speed
@cheggers1973 Ай бұрын
kzfaq.info/get/bejne/qKuegKykq9XNiKc.htmlsi=qA52UwLkhbOvIjkw
@Sam-nz2zs 5 ай бұрын
Yo so you bought the red metal parts and took the anodise off to make it metal colour? Looks sick like that
@cheggers1973 5 ай бұрын
Cheers Chap!..., the alloy parts from serious-Rc come as you see them with the silver coating, the camera has the effect of making them look simular to the polished rod and shocks.
@Sam-nz2zs 5 ай бұрын
@@cheggers1973 so what does this anodising do other than take the colour off of parts?
@cheggers1973 5 ай бұрын
@@Sam-nz2zs you annodise colour on to a part not the other way round...i removed the annodising with caustic soda...did you watch all the vid mate?
@Sam-nz2zs 5 ай бұрын
@@cheggers1973 yeah basically all of it. So it takes the colour back to metal so you matched it with the anodising silver
@cheggers1973 5 ай бұрын
@@Sam-nz2zs yes exactly that!, the silver Alloy parts from Serious-Rc are Matt anodising though... they may well get the polishing treatment at some point.... please watch all of my of the vid before questions mate.... I do my best to answer you but it makes it hard if you didn't watch all of it.. because the answer about anodising and stripping is in the vid...... cheers.
@manvendersinghrathore8340 2 ай бұрын
Bro can i use a 11.1v 5500mah 3s 35c lipo battery for my mjx idk anything abour it i just ordered it is it ok?
@cheggers1973 2 ай бұрын
No, that's far too big..
@manvendersinghrathore8340 2 ай бұрын
@@cheggers1973 bro so can i use 2200 mah for mjx ? 14210
@cheggers1973 2 ай бұрын
@@manvendersinghrathore8340 not all 2200msh 3s lipos are the same size.. but that's what the UK spec model comes with... Venom Drive 2200mah 3s 50c...
@feverexplosion1968 2 ай бұрын
Can I put 1 million diff fluid instead?
@cheggers1973 2 ай бұрын
Yes you can, it will have more locking effect...... But that's not nessasaryly better.
@feverexplosion1968 2 ай бұрын
@@cheggers1973 Is it going to have a bad effect on performance
@cheggers1973 2 ай бұрын
@@feverexplosion1968 if you only intend to use it on loose surfaces then 1 million weight is ok because you have almost permanent equal 4 wheels drive.. great for sliding and drifting without the inside wheels expanding and taking away the power from the outer wheels with actual grip... On tarmac roads, having 1 million weight locked diffs means the slightest turn will make the inside wheels spin faster than the car is moving due to the inside wheels taking a tighter radius, and the weight being on the outer wheels. And so not gripping at that point.. more sliding like the locked rear axel of a GoKart for example..
@cheggers1973 2 ай бұрын
@@feverexplosion1968 it doesn't slow it down if that's what you mean.
@larsjungnell1969 26 күн бұрын
Hej, bra video, har du prövat de mindre hjulen till mjx 16210, mycket bättre stabiletet........... 😊
@cheggers1973 26 күн бұрын
I can tell that it's Swedish, but that's all I know... You will need to translate that for a better reply from me mate...
@larsjungnell1969 26 күн бұрын
@@cheggers1973 sorry, trythe wheels for the mjx 16210 for the sabitily........ 😜😜😜
@cheggers1973 26 күн бұрын
@@larsjungnell1969 if that's advise, I think you didn't see this yet.. kzfaq.info/get/bejne/qKuegKykq9XNiKc.htmlsi=xpkjD7Po97Kf4o3o
@ArnoldKrT 5 ай бұрын
We wanna see how you send it
@cheggers1973 5 ай бұрын
Your in for a long wait mate haha... launching to oblivion with zero chance of a nice landing is not my thing...
@ArnoldKrT 5 ай бұрын
@@cheggers1973 i mean just off-road
@cheggers1973 5 ай бұрын
@@ArnoldKrT ohh I see, yeah I do plenty of that in the other vids...have a look at the Quarry vid.. Thanks For Watching Chap!
@cheggers1973 5 ай бұрын
@@ArnoldKrT this one... I feel that this is how we are supposed to use these Truggy's.. the launching is for paid KZfaqrs with a fee car haha kzfaq.info/get/bejne/n52XeKekmJzVpps.htmlsi=1em0_OGBWgBPhCGV
@feverexplosion1968 2 ай бұрын
Link to hub extensions please
@cheggers1973 2 ай бұрын
www.ebay.co.uk/itm/195511861733?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=UdLxmPhjSYW&sssrc=4429486&ssuid=6T6KsFniTvK&var=&widget_ver=artemis&media=COPY
@feverexplosion1968 2 ай бұрын
@@cheggers1973 thanks
@feverexplosion1968 2 ай бұрын
what mm and do I need aftermarket axles
@cheggers1973 2 ай бұрын
@@feverexplosion1968 it's your choice...mine are 15mm.
@feverexplosion1968 2 ай бұрын
@@cheggers1973 wait so stock axles?
@quesadajeremy9273 2 ай бұрын
Use a paper clip
@5675492 10 күн бұрын
I'm looking into slowing my 14209 down to trail speeds as much as possible . Do you know of any combination of transmissions/gearing/esc/motors that would fit the 14209 that would make it more of a trail machine ? Thanks ! I've wanted to do this ever since I saw these videos - the 14209 is a beast on the trail ! kzfaq.info/get/bejne/fsWampaTz57Xhok.html kzfaq.info/get/bejne/naqSo8ebubXJoZc.html
@cheggers1973 9 күн бұрын
I only know how to make it faster chap.
@lukerecore 5 ай бұрын
What??
@cheggers1973 5 ай бұрын
What what?
@lukerecore 5 ай бұрын
@@cheggers1973 I couldn't hear a word u were saying.
@cheggers1973 5 ай бұрын
@@lukerecore wait about 20-30 seconds and you will hear me Perfect chap...I knew I should have wrote on screen about that..
@brenthood2337 Ай бұрын
If you go too far with aluminum especially suspension arms you'll lose all your durability.
@cheggers1973 Ай бұрын
Not correct. I've broke 3 plastic wishbones... zero aluminium ones.
RC crazy
Рет қаралды 16 М.
EverydayDriver
Рет қаралды 50 М.
Mark Bryan RC
Рет қаралды 11 М.
Does what it says!
Рет қаралды 5 М.
Rakish Rc
Рет қаралды 2 М.
RCMOXETO
Рет қаралды 684
Action C Mini
Рет қаралды 122 МЛН
FOOTBOT
Рет қаралды 14 МЛН
FreakFIghtASMR
Рет қаралды 11 МЛН