Is mjx 14210 v2 and mjx h14bm has any difference? Plz answer my question...what should I buy
@LorD8-149 күн бұрын
would like to clarify a little, was the front differential replaced with one similar to the rear one for the installation of reinforced drive shafts?
@cheggers19739 күн бұрын
@LorD8-14 the differentials for the dog bone shafts and the telescopic ones are different yes.
@feverexplosion196810 күн бұрын
Would the Hobbywing 16bl30 be fine?
@cheggers19739 күн бұрын
@feverexplosion1968 yes but it's less power than standard.. standard is 45A.
@curbscrape834312 күн бұрын
After roughly 35 years with rc , I've just heard a solid explanation and tips of toe-in/out and handling. Cheers mate. Subbed.
@cheggers197311 күн бұрын
@curbscrape8343 that's a nice comment to read chap!, Cheers!
@t3floz13 күн бұрын
Hello! Does the metal steering parts reducera slopiness in the wheels?
@t3floz13 күн бұрын
Great man how has the diffs been holding up?
@BigAndy80sGen15 күн бұрын
Excellent...... 👌 But where's this promised speed run...???
@cheggers197315 күн бұрын
@@BigAndy80sGen smashed it twice trying so far!, it's in the bag awaiting repair.
@feverexplosion196817 күн бұрын
Dont put deans on 150 amp esc, put xt90 or ec5
@feverexplosion196817 күн бұрын
0:18 What happened?
@feverexplosion196817 күн бұрын
can you send the link for the Limited Slip Diff
@karlt386919 күн бұрын
Easy sub.
@grumpygrandpa364019 күн бұрын
What wheel hex’s extender did you get ?
@TomsCornerph21 күн бұрын
In addition to that, I also ordered an aluminum servo horn. Not sure if it will make a difference in the steering though.
@t3floz19 күн бұрын
Please come back and tell me if it did make any difference
@jamesbrooker650821 күн бұрын
Sorry for all the questions tonight what is the extenders to use? Do they fit just straight on
@jamesbrooker650822 күн бұрын
Hi sorry I’m trying to remove the middle bar on mine but it just seems to spin any tips
@t3floz22 күн бұрын
Got a e revo 1/16 which I think is annoying to work on. Do you think the mjx is hard to work on? Do you think the traxxas esc would fit?
@MrT83b23 күн бұрын
Is there any difference in handling between the 2 models?
@567549229 күн бұрын
I'm looking into slowing my 14209 down to trail speeds as much as possible . Do you know of any combination of transmissions/gearing/esc/motors that would fit the 14209 that would make it more of a trail machine ? Thanks ! I've wanted to do this ever since I saw these videos - the 14209 is a beast on the trail ! kzfaq.info/get/bejne/fsWampaTz57Xhok.html kzfaq.info/get/bejne/naqSo8ebubXJoZc.html
@cheggers197328 күн бұрын
I only know how to make it faster chap.
@troopermyself111 күн бұрын
U can limit the acceleration And make it slow
@567549211 күн бұрын
@@troopermyself1 I was hoping for something other than just trying to limit it with the amount of pressure on the trigger . From what others are telling me just replacing the receiver and transmitter with one that has a variable speed control on it might be the answer .
@troopermyself110 күн бұрын
@@5675492 yes I bought a radiomaster mt12 elrs for that I too like crawlers whenever i go off-road…
@jamesbrooker6508Ай бұрын
Hi what’s best to get rid of throttle delay esc or new receiver?
@cheggers1973Ай бұрын
Both.
@jamesbrooker6508Ай бұрын
@@cheggers1973 Damm 😂
@jamesbrooker6508Ай бұрын
Sorry what parts would you suggest for me to get to take the steering better without buying all the aluminium parts
@cheggers1973Ай бұрын
They are approx £10, this is the Way...
@jamesbrooker6508Ай бұрын
@@cheggers1973ok was it just the aluminium steering just to buy to make it a bit better
@eliflynn7282Ай бұрын
The fans are weak and I'm trying to find a good motor fan. Replaced the servo with a 1/10 metal gear servo and it actually turns now.
@troopermyself127 күн бұрын
Looking for 14209 hypergo servo upgrade Help needed
@larsjungnell1969Ай бұрын
Hej, bra video, har du prövat de mindre hjulen till mjx 16210, mycket bättre stabiletet........... 😊
@cheggers1973Ай бұрын
I can tell that it's Swedish, but that's all I know... You will need to translate that for a better reply from me mate...
@larsjungnell1969Ай бұрын
@@cheggers1973 sorry, trythe wheels for the mjx 16210 for the sabitily........ 😜😜😜
@cheggers1973Ай бұрын
@@larsjungnell1969 if that's advise, I think you didn't see this yet.. kzfaq.info/get/bejne/qKuegKykq9XNiKc.htmlsi=xpkjD7Po97Kf4o3o
@treb1395Ай бұрын
where can i buy the front lower bumper?
@cheggers1973Ай бұрын
It was made by me from alloy tube.
@deathscretonАй бұрын
How did you fit a 3660? I picked up a 3650 and its too fat to fit against both the driveshaft and properly mesh with the spur gear.😢
@cheggers1973Ай бұрын
There is a minimum pinion size to make it work.. can't remember what it is though, I have a 28T fitted.
@deathscretonАй бұрын
@cheggers1973 Thanks for that tidbit, I bought a 5mm shaft adapter and a few bigger teeth pinions. Hopefully this works out.
@Lukas_911Ай бұрын
Hi! Just found your video. Great job there! I have one question. I am slowly upgrading my 14210 and I got the same red tie rods. Just went out to try the car but they get unscrewed completely. How did you fix them? I tried even to start with a very open toe (tie rods totally screwed in) but after 3 mins of runs they get completly unscrewed and they fall apart. Tried to put the system together, run once more and the issue came back.... Your help would be very much appreciated!!!
@cheggers1973Ай бұрын
You need Loctite 243 Thread lock on all the screwy bits.. set the steering straight.
@Lukas_911Ай бұрын
@@cheggers1973 thank you mate! Will put immediately when I will be home 🙏🙏🙏🙏🙏🙏🙏
@brenthood2337Ай бұрын
If you go too far with aluminum especially suspension arms you'll lose all your durability.
@cheggers1973Ай бұрын
Not correct. I've broke 3 plastic wishbones... zero aluminium ones.
@khai5922Ай бұрын
You have any issue with stripped screw under the chasis? I noticed the screw material quite low quality
@@feverexplosion1968 it's your choice...mine are 15mm.
@feverexplosion19682 ай бұрын
@@cheggers1973 wait so stock axles?
@manvendersinghrathore83402 ай бұрын
Bro is this car durable ? How is your experience with it till now with durablety
@manvendersinghrathore83402 ай бұрын
Bro how did you install that fromt bumper in it i too want to do it byt idk how to do it
@TallyhoScreams2 ай бұрын
I know I’m a bit late to seeing this but I noticed you have a metal skid plate just below the front suspension. Is that a part you found or is that a custom one? Great video!
@cheggers19732 ай бұрын
Cheers!, It's a custom one made by myself from some alloy tube, mounted on top of a manufactured one from the 16207 that needs modifications to fit.
@manvendersinghrathore83402 ай бұрын
Bro is there any speed difference between 14210 and 14bm the older and newer version i have 14210 so is there any speed difference difference or is it same speed difference
@cheggers19732 ай бұрын
I already answered this question.... Go to FaceBook, join MJX groups and ask questions there...
@manvendersinghrathore83402 ай бұрын
Bro can i use a 11.1v 5500mah 3s 35c lipo battery for my mjx idk anything abour it i just ordered it is it ok?
@cheggers19732 ай бұрын
No, that's far too big..
@manvendersinghrathore83402 ай бұрын
@@cheggers1973 bro so can i use 2200 mah for mjx ? 14210
@cheggers19732 ай бұрын
@@manvendersinghrathore8340 not all 2200msh 3s lipos are the same size.. but that's what the UK spec model comes with... Venom Drive 2200mah 3s 50c...
@manvendersinghrathore83402 ай бұрын
Is there any speed difference between between 14201 and the 14Bm the newer and the older plz reply i got the old one is there any difference and are boht tha car durable ?
@cheggers19732 ай бұрын
If you mean the 14210 and the H14BM, they are the same speed same car apart from slightly different shell and the H14BM has a slow mode,eco mode.. the 14210 comes in full power mode..
@manvendersinghrathore83402 ай бұрын
@@cheggers1973 ok thanks for replying just one question more is it durable? Its much first rc the 14210 i will use it with car and I’ll do a very little bit bashing so is it durable enough for that?
@cheggers19732 ай бұрын
@@manvendersinghrathore8340 it doesn't matter what I say in terms of durability, there is no measure.... Everything can break.
@yunusdesai24292 ай бұрын
Great video. How durable has the aluminum parts been for you for bashing?
@cheggers19732 ай бұрын
They are stronger due to being alloy.
@jefftait47452 ай бұрын
What bearings are needed for inside the steering cups?
@cheggers19732 ай бұрын
It states exactly what bearings are needed in the owners manual.
@marktsarenko39433 ай бұрын
hey man, do you have any insider info on 10208? will there be an amazon commission model like h14bm?
@cheggers19733 ай бұрын
I have no idea chap...
@robertowens77713 ай бұрын
Nice run, if you want to see faster check out my run search for legendary Sonic beast thanks
@TallyhoScreams3 ай бұрын
Did the upgrades help the squirrelly handling? I bet the weight keeps it from flipping as much.
@cheggers19733 ай бұрын
Everything I have done to it has improved it chap.
@iammad45133 ай бұрын
Where to buy the wheels mate ?
@cheggers19733 ай бұрын
AliExpress
@feverexplosion19683 ай бұрын
Can I put 1 million diff fluid instead?
@cheggers19733 ай бұрын
Yes you can, it will have more locking effect...... But that's not nessasaryly better.
@feverexplosion19683 ай бұрын
@@cheggers1973 Is it going to have a bad effect on performance
@cheggers19733 ай бұрын
@@feverexplosion1968 if you only intend to use it on loose surfaces then 1 million weight is ok because you have almost permanent equal 4 wheels drive.. great for sliding and drifting without the inside wheels expanding and taking away the power from the outer wheels with actual grip... On tarmac roads, having 1 million weight locked diffs means the slightest turn will make the inside wheels spin faster than the car is moving due to the inside wheels taking a tighter radius, and the weight being on the outer wheels. And so not gripping at that point.. more sliding like the locked rear axel of a GoKart for example..
@cheggers19733 ай бұрын
@@feverexplosion1968 it doesn't slow it down if that's what you mean.