MN82 Toyota LC79 Review, factory update, and round 1 of mods

Рет қаралды 3,690

4 ай бұрын

Today I review the new fully licensed Toyota from MN Models, talk about the updated dog bones, and go through the first round of mods.
Get your WPL 30amp 3S ESC here www.wpl-rc.com/?ref=p08bs60j

Пікірлер: 40

@Drivingdrew719 4 ай бұрын

I got a couple vids of the red one all i did was swap out wheels and tires and worked on its stock suspension and detailed the body and interior...its by far the best stock esc receiver and motor that has come in wpl or mn ..👍

@SRCE2070 4 ай бұрын

I do have to agree as far as these RTRs go, this has to be MN Models best rig yet! I changed to the 30 Amp 3s for more power and better slow speed control, but yeah the stock unit is miles ahead of the previous ones.

@MysticRiverRC 4 ай бұрын

Thank you kindly! I bought my nephew an MN78 for Christmas. He has already broken the rear driveshaft, and I can see the metal pin dislodged in the front steering knuckle. I have 3 other MN78s, two have been used for over a year with no problems. The third is where I'll get donor parts to fix his truck. This was a very helpful video as I'm trying to wear these things out and upgrade the weak parts. I'm also waiting on parts to swap metal gears into the MN78 transmission and convert it to a 370 motor. Anyway, I enjoyed your discussion and found it quite informative. Cheers!

@SRCE2070 4 ай бұрын

Thank you for the kind words, I’m new to doing videos but not to Rc so hopefully I can help others in the future as well. Rc has been very therapeutic for me, it’s a great hobby!

@MysticRiverRC 4 ай бұрын

It sure is! I only started making rc videos last year about the same time as I started with the hobby. There is a big learning curve, but I enjoy it. You definitely helped me today. @@SRCE2070

@hollyhillrc 3 ай бұрын

A very interesting insight into this RC. It's been very helpful. Thank you.

@SRCE2070 3 ай бұрын

Glad it was helpful! There will be more on these coming soon.

@RC3DPrintAdventure 4 ай бұрын

Great review. I agree these small trucks are fun to modify at a low cost. 👍

@SRCE2070 4 ай бұрын

Thanks 👍 I appreciate the feedback

@howlandneal 3 ай бұрын

This MN model is fantastic, easily the best I've bought yet. While I also own the MN82. Funny, I ended up buying two of these trucks simultaneously just like you, knowing I'd likely tinker and need spare parts. That's the great thing about these affordable RC trucks, you don't have to worry as much about breaking something, experimenting with mods or just using the body on another rig. Thanks for the video!

@kiraleaf 3 ай бұрын

I used to race, so my big tip for OIL SHOCKS is to get a lot of plastic shock piston discs for dampening experimentation. Usually they'll have two holes, but you can notch triangles into the opposite side edges to increase flow to make spongier shocks (10w oil) w/ softer springs so that driving at speed over terrain will look floaty and realistic instead of bouncy. #oilshocks

@SRCE2070 3 ай бұрын

Haven't figured out which shocks I'm gonna use yet, but yes I agree

@kiraleaf 3 ай бұрын

@@SRCE2070 perhaps see how much maximum travel you can get out of it if you can find alternate front mounting points.. have the resting position midway to get the best articulation and least stress on the driveshaft.

@pandacrawler6x6 2 ай бұрын

Awesome Tutorial and Great info share my Friend ❤ Thks 🎉

@SRCE2070 2 ай бұрын

Thank you!

@pandacrawler6x6 2 ай бұрын

You're welcome my Friend ❤ Big thanks for the info

@aeroelastic6736 2 ай бұрын

@SRCE2070 Thanks for a fantastic and detail review. Sorry i have a few questions that i hope you might be able to help. For the WPL esc, is it plug and play with the MN tx/rx? And does it bring out more low end torque of the MN motor? It is lacking a bit with stock set up. Also, for the dog bone brass bushing, do you mean pushing it further into the plastic sleeve of the dog bone? Mine hasn’t broke yet but might want to tighten it first before it came loose or cracked? Thanks in advance.😊

@SRCE2070 Ай бұрын

You would have to use a new transmitter and receiver for the WPL esc, I use a hacked Flysky gt3b, Using 3s with the WPL esc really brings the stock motor to life, Yes you would want to push the brass bushing outward closer to the wheel.

@aeroelastic6736 Ай бұрын

@@SRCE2070 thanks for the response. Will be looking around for a set of tx/rx

@nicka.9073 4 ай бұрын

Love what you did with your MN82, thanks for sharing! The white on the Toyota lettering on the tailgate makes a huge difference. What did you do for the white? Paint or decal rub? For my MN82 I have swaped my front axles for metal (mostly for the added weight), and the drive shafts as well. Unfortunatley my metal front axle came with outer bearings missing, the risk of Aliexpress orders I suppose. I also installed weighted beadlocks with a sticky tire, but with the tire diameter being slightly larger by a few mm, the tires bind on the fender when turning. Thanks again for the video!

@SRCE2070 4 ай бұрын

Thanks! I used a craft paint marker I found at a dollar store, it was a pretty easy job but you still have to take your time and be careful, I did it looking through a magnifying light.

@nicka.9073 4 ай бұрын

@@SRCE2070 Great, thanks!

@daijoubu4529 4 ай бұрын

The second "gear" limits speed to 50% and enable drag brake

@SRCE2070 4 ай бұрын

Thanks for the info, I remember now that you mentioned it.

@aaronmiller3138 3 ай бұрын

Hell I’m still waiting on my mn82 was wondering what kind of tires you used for the upgrade? I’m also waiting on metal drive shaft n axels up grade.

@SRCE2070 3 ай бұрын

On the yellow truck I used WPL first version soft kit tires on WPL C34/44 wheels, I have foams in the front and weights in the back two, these tires, wheels, weights, and foams are available on the official WPL website. However I'm testing some new Injora tires that I will be reviewing soon on the yellow truck, they are hands down better than this setup.

@topqualityfi8216 25 күн бұрын

So if i get wpl 30amp esc, i need to get something else too? Its not just plug and play?

@SRCE2070 25 күн бұрын

Unfortunately no, I eventually upgraded all of it, but in order to run that esc you'll need a radio and receiver, I use Flysky but any bargain radio will work, just find something with a small receiver.

@jitihuN21 2 ай бұрын

I'm considering buying this RC, because this is my first time getting into the RC hobby. is the electronics stock strong in the long term if we play it right? If it's rarely used, does it break quickly like an ESC error?

@SRCE2070 2 ай бұрын

I would honestly upgrade the esc, I didn't have any luck with the earlier MN Models escs lasting, I haven't ran the stock red one long enough to know but it's getting upgraded too.

@jitihuN21 2 ай бұрын

@@SRCE2070Unfortunately I don't have more budget. My budget is very limited, so after spending money on this RC I can't upgrade.

@SRCE2070 2 ай бұрын

@@jitihuN21 buy the $12 dollar Wpl esc I have linked in description it works great, 3s 30amp

@jitihuN21 2 ай бұрын

@@SRCE2070thank you

@tomasferreira1379 3 ай бұрын

I order one it Will be my frist. Do you thing i should use in the sad or Will broke the RC? Its waterproof?

@SRCE2070 3 ай бұрын

I don't understand first part of your question, I don't think it's waterproof, you'd have to check with manufacturer, I don't run my RCs in very much water anymore, causes too many issues later on.

@tomasferreira1379 3 ай бұрын

Sorry I was asking if I should use in the sand 😅

@SRCE2070 3 ай бұрын

Yes you can run in sand but it will require more maintenance for sure, these don't have bearings but they do have metal gears in the axles and that sand will over time destroy those gears and all the plastic bushings, I would disassemble, clean, and regrease axles regularly. The transmission would also need the same regular maintenance in those conditions.

@tomasferreira1379 3 ай бұрын

@@SRCE2070thx 🙂