This Man is a great teacher thanks for all the knowledge.

You are really a life saver. I just followed your instructions about air in the fuel pump and my engine is working fine. Thank you so much sir. From Gentri Cavite.

Thank you! You explained it so clearly, simple explanation, but very clear!!

This is the first time i saw an indirect injection 4D56 diesel engine being started without its glowplugs. It started rightaway with ease and im in totally awe. What you have is a very clean engine and kind a brandnew injection pump. You clearly stated everything what is right and just. I agree with you , its just a simple leak in the system that will introduces air and eventually causes hard starting. Now i know. Thanks to your video, i learned a lot with you, your the kind of person that truly knows the wonder of diesel engines especially the 4D56's. Some were just pretending or do copycats and dont know sh*t about what their doing.

From Papua New Guinea your explanation very simple and clear. Thanks.

Your a great mechanic and a doctor of machine i salute you hindi ka madamot

😊 I helped overhaul a Mitsubishi 6DB1 that was 1998. After overhauling glow plugs not yet available. Chief mechanic decided to test run the engine, told me to remove intake air cleaner and prepare gas torch. When set-up was ready, lit the gas torch and put near intake manifold port while engine started to crank. 3 attempts when white smoke out on exhaust then it runs. Chief was experienced also in Cummins, Detroit, Caterpillar engines for locomotive and heavy equipment.

My man … having starting issues…tomorrow I’ll check all this steps. Thank you 🙏

Maraming salamat po sir ilang beses ko pinanood... At napakalaki ng nag bago sa pag start ng 4d56 adventure ko salamat po sa pag share ng knowledge the best po more power... Godbless po ☺️👌

Maraming Salamat Sir! Watching here Al Khafji Saudi Arabia from General Trias Cavite Support Filipino Vlogger especially Ads...God Bless

This 12 minutes video saved my 30 day schooling .😊👍

Thanks! I've learn a lot there. Specially my pajero is always a hard starting in the morning . Keep it up!

Thank you for your frank and clear explanation. Please keep up the videos going.

God blessed po,Sir I learned something on ur blog on diesel engine,one time its Happened on my owner type jeep, Long live 4u Sir,alhumdulillah. Maraming Salama po.

Man! I have learnt so much from you. Thanks for educating

Nice to see someone who actually knows what they are talking about 👍🏻

Great, clear video.. Helping me in Australia.

Ang linis ng Engine bay mo boss👌🏼♥️♥️ Parang modelo

You really teach me a lot...di ko na need ang tesda...salamat

I dont have much experience with diesel. Great video my friend. Better than people just saying "glow plugs"

Really impressive tutorial. Thank you for creating quality content. Stay blessed

Thanks a lot for this article, and especially for this same engine. God bless

Such a nice video, and a lot of informative tips, Thank you very much!!

Thanks Man, very informative video. God bless.

Very informative and very clear explanation.

Very nice content sir. This will help me alot. Thank you and salute to you..

Let just praise you for having your engine bay clean and mint! and yes diesel engine works by compression. Thus, we can stop a runaway diesel by killing the battery.

ive tried this one...and it actually works...👌

Thank you, very clear and easy to follow explanation..

Congratulations. Very realistic and practical troubleshooting.

I agree and very thankfull to your tutorials vedio Sir. your vedios are all informative.just today i seen my father inlaw mitsubishi space gear L400.every morning he almost drain out his battery to start the engine.its almost a year since the mechnic touch the engine to replace a glow plug and install a wrong glow plug.its longer than the iriginal glow plug so all new glow plug are dead or busted.im not a mechanic i am an engineer.because of this vedio so i come ti check the engine of my inlaw car.so i just replace the fuel pump assembly because it does not anaymore suck fuel when i bleed manualy and after replacing the fuel pump i bleed rigth away and without the use of the glow plug because they are all busted it start right away and my father in law was very happy.i didnot buy glow plug but i let him see that the glow plug are all busted but see it start easily not a matter of 2sec unlike before.this is very true bleeding the fuel line it the best remedy.Thank you Sir for sharing your knowledge to every one.👍👍👍👍👏👏👏👏

Great video sir, I was about to buy a new battery because I thought the problem was a faulty battery on my Pajero gen2 that makes it really hard to start in the morning. The culprit was the fuel filter/pump, there was air in it, bled it out and all was great after. Maraming salamt sir.

hi, very informative video. really interested in the braided hoses / clear hoses that you used, where do you get them and how often do you need to do replacement? do they get damaged cos of engine heat/diesel fuel/etc?

I'm your new subscriber.. Thanks for the video.. I have a diesel engine car.. So next time I have a problem, I know what to do..

Excellent video. New subscriber. Saludos desde Uruguay

Very informative sir! Thank you! Subscribed! 😊

Keep dng more videos ,learned alot. Thanks

Much thanks, well and fully explained

Great video, Thanks Amigo!

nice one brother, so helpful thank u...

maraming salamat.. really informative video.

Very helpful. Thank you.

Thank you. Very clean engine.

I have learned alot after watching this video

Thank you for the knowledge brother

Good day Sir I'm so impressed of what u have done thnk u a lot for it. By the way i do it myself but it still fail to start d engine. My fuel filter was replaced by a new one. How come that it won't start.

Your a good teacher sir

Great teacher!!!

Good video sharing, keep move to other video soon bos.

Very nice video, thanks brother,

thats for the share , if possible make some video on diesel injection timing via dial gauge ,,,,,,

Excellent presentation

Thankyou so much mate.

Very Informative

Thanks. Trying this morning.

Hi Great presentation I have ❓ My Nissan UD has that problem But also when going down hill the truck smokes and misfires a lot. Ay ideas Thanks

Verfy Impressive videos well explained

So..whilst i appreciate what you are saying about potential airleaks causing poor starting..im sure that would cause poor starting hot or cold. Always best to check the glowplug circuits before replacing any parts followed by a resistance check on the actual glowplugs to see if one or more has failed They are quite cheap n easy to replace. Good video 😎😎

Hi great video. I have primed the fuel filter with no issues but my van runs terrible.and takes ages to start. When I remove the busbar it starts and runs fine any ideas ??

nice work buddy

very nice video in yuotube .thanks👏👏👏

U are smart man thank you

if you could provide some this kind of information for Nissan Patrol Y60 2.8Td. Kinda have the same issues, changed the glow plugs,battery, checked the fuel lines and fuel pump, didn't notice any leaks, but still i have to wait for a 10-15sec for a selenoid click in engine to have a better start. Somehow sometimed it have better starts in cold start than in warm start. I will be so thankful if you could give me an answer on this case. Thanks

Thank you sir for sharing this video

Awesome video thanks

Explain on nice way...

Is this also applicable on a 4m40 engine?. Mine has a manual heater button that I need to press for cold start

Thank you. Followed your advice to bleed my pump and the bleed screw has never ending bubbles. I removed the suction hose and I confirm a suction but it's a bit weak. I pumped the feed pump a few times before I started it cold and it took a maybe 3-5 seconds to start....... compared to maybe 20-30 seconds of hard starting before watching your video. My fuel consumption is also excessive even though I have a newly overhauled engine. Was calibrated last year but am unsure if the calibrator was good. 2 questions: 1) is my feed pump dead because of the never ending bubbles in the bleed screw and weak suction (unsure how strong it should be), and 2) any thoughts on my excessive fuel consumption? Maybe you should do a video on that. Some 4d56 engines are efficient while some are not.

Thanks sir ,it's really bec of air causing hard start, my hubby was able to fix our car.

Sir I have a 97' toyota hilux with a 2L diesel engine. Is the firing order the same with all diesel engines? Glow plugs are ok, fuel filter is new.., solenoid is ok, but still will not start. Fuel seem is not getting to the pistons.

Hello can u do belting maintenance on this engine? Its hell expensive to bring it to workshop so if rather fix it myself

Nice I own a hilacha 2L good to know 👍👍

Good video.

Woww very informative...pa shout-out po

Good evening sir, may I ask a question? Can a broken/not fully functional fuel filter pump cause a fuel circuit discharge? I have a 4d56 ('02 Pajero Sport GLS with Intercooler) with new glow plugs and fuel filter but I'm having hard start problem... I have to pump several times and then starts at the third tentative. I can't see any leak around the engine bay. Thank you so much for your job, I'm new to this type of motor and I'm learning a lot with your videos.

Greatness ☝🏽👌🏾

Very informative sir, how about toyota 2L engine hard starting?

Nice presentation! Thanks a lot and it help much..

Nice my engine is same this one 4D56 mitsubishi adventure..

Thank you sir

Nice explanation. What if the white smoke comes when you start the car which disappears when the engine is warm. Not vapour

Very good video! Thank u. I will try this as I had removed my fuel tank to clean it from rust and since then it has not started again. I will try this because I beleive I might have air in my fuel lines. Thank You so much. I will update you.

Our ford everest 2004 model diesel, hard starting whether it's cold start or hot.. In order to start it smoothly we need to turn the IG on then wait for a sec for the glow plug icon (icon like a coil) to be turn off then that's the time we got very quick starting.. Is it normal to that model or it is necessary to check if there's any problem on the starting system? Thank you sir! God bless!

What should be a good compression? How many bar?

Good day sir. I have my problem my car Mitsubishi 4d56 non turbo. The problem is cranking but no start. I replaced new fuel filter pump assembly and they have current supply shut off valve okay and good supply diesel but I start cranking but no start.

I'm asking what is the size of glow plugs of L200 1993 model if u have an idea? thanks. God bless

thank you for sharing this. Mabuhay

Sir can you share about vibration problems of 4d56/D4ba

is this method same as 4m40 diesel engine? I do have a problem that my 4m40 is cracking only but it won't start.

Hi sir. I have a pajero gen 1 4d56 turbo. I noticed that it looses power when the engine is hot. What can be causing that? Thank you

if brake booster have air leak, can cause engine turn off?

Hello sir. Thank you sa video very clear and helpful. Meron akong pajero 4m40. Ang problema pag matagal d nagamit, mga 1-2 days, nagpapalya sya after 30 seconds to 1 minute pagkastart. No problem sa initial start, 1 click lang andar na. Minsan namamatay pa talaga, pero napapaandar naman pero hard start na. After mapaandar ng ilang seconds ok na sya at stable na rpm. Leak sa fuel line din po kaya ito? D ko pa nasusubukan yung manual pump na tinuro nyo.

Thank you

Hi sir....one of your avid follower...may i ask po, about fuel strainer of 4d56 engine..where it is located and when to clean it for maintenance..i have a l300 vehicle with 4d56 engine too...thank you very much. God bless u and ur loved ones.

Hi,how about 4m41? Long crank?

Pwedi ba ma lagyan ng turbo ang adventure 4d56? Sana gawa kayu videos paanu mag kabit ng turbo sa 4d56.

As you can show on the video, my hand pump doesnt suck when I put the finger insted of the hose. Should I replace primer pump?

My l200 with the 4d56 with turbo intercoller won’t start at all. When i try to prime the fuel filter no diesel comes out. What can it be?

I got a 2H 4.0 diesel Toyota..to start engine I hv to turn key 2 times..never start the first time..always the second time..so I changed 2 glows plugs 12V and put 24V like all others,but worst than before,,no start at all..I reput 12V old plugs and it started..why?Thanks

Hello sir...ask ku lang po kung pwede ba sa suksukan ng deepstick maglagay ng atf