Fix the battery heath issue on iPhones with iOS 17.4 or later (Tips and Tricks #83)

No video

Fix the battery heath issue on iPhones with iOS 17.4 or later (Tips and Tricks #83)

Рет қаралды 6,822

Күн бұрын

🔧 Welcome to MobileSentrix's Repair Tips and Tricks!
Learn how to fix the battery health on iPhones with iOS 17.4 or later after replacing the battery. In this comprehensive guide, discover step-by-step instructions, expert tips, and tricks to revive and optimize your iPhone's battery health effectively.
Remember to 👍like, 🔔 subscribe, and hit the notification bell for more helpful repair tips from MobileSentrix! 🛠️
🔗 Stay connected with MobileSentrix:
Website: www.mobilesentrix.com
KZfaq: / mobilesentrixofficial
Twitter: / mobile_sentrix
Facebook: / mobilesentrix
Instagram: / mobilesentrix
LinkedIn: / mobilesentrix
#iPhoneBattery #BatteryRepair #iOS174 #BatteryHealth #iPhoneTips #iPhoneHacks #TechTips #iPhoneRepair

Пікірлер: 24

@jtw7777 4 ай бұрын

A lot of work for something that use to be so quick & simple.

@tomg.4030 9 күн бұрын

A what step so you flash?

@jimmycole855 4 ай бұрын

Unbelievable apple

@jozkostraka5933 2 ай бұрын

Hi, I did as you wrote.. the battery health now does not want to show, the error message does not write, nor the service as before, but when I click on the battery health so it just loads, but does not show..

@matthewJamesKendell 2 ай бұрын

When calibrating a battery using a JC Programmer, you can set the battery health and cycle count to any number you want (e.g If I replaced my phone battery with a genuine apple battery from another iphone that I knew had a battery health of 94% and Cycle count 350, I would programme the new battery with these numbers after BMS transfer and the the health in settings would show 94%. But regardless of how I programme the tag on flex, Flashing the iphone with 3u tools always sets the health to 100%. Is there a way to flash the phone so shows the battery health and cycle count I put in?

@cjjxs24 4 ай бұрын

3u battery health flash with tag on flex installed does not restore battery health displayed on device to 100% still says old BH for 13PM already on 17.4.1. Using tag on flex which comes with Ampsentrix core battery Have seen info indicating 17.4.1 patched workarounds in 17.4. Any update to this video which works for 17.4.1. And will any workaround work with 15 series

@LuaTech Ай бұрын

Any updates?

@Daniyo27 4 ай бұрын

Are you able to remove the tag on flex after flashing in 3utools? And will it survive a restore from iTunes after the 3uTools fix?

@matthewrobinson150 4 ай бұрын

mm flash with retain user data wont work??

@FRIGYES10 4 ай бұрын

Does not seem to work for iOS 17.4.1 or newer. Did you find a solution?

@user-xr6ve8kv3p 4 ай бұрын

It's the same for me. I welded the BMS board to the new battery, I flushed it through 3utools, The battery condition is still the same (80%) Do you have similar symptoms to mine?

@TheXV1CT0Rx 2 ай бұрын

Any update?

@snmfsquirrel87 4 ай бұрын

Injuredgadgets has xcap bms. What do you have that's similar?

@wolverine3172002 4 ай бұрын

Yes they do , but are they having the same issue?

@snmfsquirrel87 4 ай бұрын

@wolverine3172002 no? It has a built in tag on that rewrites it. Prompt boot with lightning cable?

@andrewroro Ай бұрын

is this still a thing on iOS 17.5.1?

@MobileSentrix 27 күн бұрын

yes, but it will require a flash with 3uTools or iTunes after

@Bostonn617 14 күн бұрын

@@MobileSentrixso I’m confused - if I order a battery from you guys what do I need to make it work and be able to check health. I don’t know why this is so confusing and no company can lay it out in simple terms on there website. Do I still need the tag on , do I need some type of programmed or do I still need to spot weld the old BMS onto the new battery?

@Talmiior 3 ай бұрын

couldn't you downgrade the phone to an older iOS, install the new battery and the upgrade the OS? Wouldn't that work? I'm pretty sure you can do that just using iTunes

@donevangravelle 2 ай бұрын

old softwares are not signed and wont work

@Talmiior 2 ай бұрын

@@donevangravelle there are ways to use unsigned software. I haven't figured out how but I know it's possible. Wouldn't that do the trick?

@ionsilvan9169 Ай бұрын

You can't downgrade