Compact Filament Drying & Storage System (Polymaker PolyDryer)

Рет қаралды 14,803

Күн бұрын

Get $5 Off Your First PCBWay Order Here:
pcbway.com/g/A23h8V
Find Out More Or Pick Up PolyDryer Here (AFF):
bit.ly/44JsvIf
Orange Color Changing Desiccant I Ended Up With (AFF):
amzn.to/3WvYTfs
Josh's Video on his DIY setup:
• Easy dry storage for 3...
Love the channel? Consider supporting me on Patreon:
www.patreon.com/user?u=806627
Get Great Filament From PolyMaker & Help Support The Channel:
bit.ly/3P5MRD7
ModBot Merch Store is now live! Get yours here:
bit.ly/3qhJ8Yl
Join the official ModBotArmy discord server: / discord
In this video, we dive into PolyDryer, a brand new filament drying and storage solution from Polymaker. This modular system is a pretty unique take on the traditional dryer and provides a lot of potential for future upgrades and mods. We'll go step by step through the specs, how the system works, and I'll share my thoughts based on my time with it so far.
(´∀｀)♡ As an Amazon Associate I earn from qualifying purchases:
Buy now on Amazon: amzn.to/2jQAOgV
Subscribe To My 3d Printing Blog! :
Lets Get Social!
Facebook: / dopesoner930
Twitter: / modbotarmy
Instagram: / modbotarmy
Twitch: / dopesoner930

Пікірлер: 78

@ZombieHedgehogMakes Ай бұрын

It was a lot of fun helping to develop this dryer! Glad to see it's getting overall good reception.

@donald1792 Ай бұрын

good thing your not called HumbleHedgehogMakes

@elleryfg7853 Ай бұрын

@@donald1792😂😂😂😂😂

@htpkey Ай бұрын

@@donald1792 I don't get your snarky comment. OP put effort into developing something and your reply is "wow, look at this 'humble' guy over here" in a sarcastic tone. It's just petty.

@MyTechFun Ай бұрын

Similar temperatures like I measured. I agree, that it should go a little bit higher for PA. It can dry nylon on this temperature too, but it needs much longer drying time. I think you mentioned a link for color changing silica gel, I can't find it in your description.

@ModBotArmy Ай бұрын

Thank you for the reminder! I feel like there is always something I forget. Link has been added to the description :)

@85celicagts Ай бұрын

Fantastic video. I've been watching a nunber of videos on this product as they've rolled out in thenlast couple days. Yours is by far the most detailed and thorough. Great job!

@ModBotArmy Ай бұрын

Thank you! I really tried to be as thorough as possible.

@highroyds 9 күн бұрын

Seriously been looking at these... thanks for the video

@stevehanwright481 Ай бұрын

once again a great video thanks for your insights

@extrutim Ай бұрын

Yesterday I uploaded my 3D printable version of this box. If you use a cheap filament you can save a little bit of money per box. However, my intention was to improve a few features that are missing on the original or that I don't like. For example, to make the box stackable or to replace the very tight closure with a better one. All in all, I like the option of being able to simply place the box on the dryer.

@Jesse_Kershner 10 сағат бұрын

where?

@squeemeister Ай бұрын

Great video and review! As someone with a food dehydrator and a dozen or so cereal containers I'm a little jealous but as you touched on, the money I've saved equals more filament I can buy; which equals more inexpensive dry-boxes I need for storage which saves me money which equals more filament I can buy which equals more...

@justinchamberlin4195 Ай бұрын

Polymaker is one of those companies where I'm not sure the higher price really deters me...they have been very supportive of the 3D printing community and make quality products. I wouldn't use a large number of the boxes for filament storage (the large, airtight plastic tote I got from Amazon for $25ish holds many kilos and has a sealed, rechargeable, indicating silica gel EvaDry unit rolling around inside) but the dryer does beat the Sovol dryer I got bundled with my SV06 Plus in features including max temperature.

@chuysaucedo7119 Ай бұрын

Thanks. Good video.

@rynnjacobs8601 Ай бұрын

I like the concept of separating the dryer-unit from the box(es) very much. But too expensive.

@joannechan8478 Ай бұрын

Thanks the the video , that is really helpful! I have one quick question: after printing, do I need to open the box to tidy up the filament before I can store it as a dry box?

@rynnjacobs8601 Ай бұрын

At 6:40 one can clearly seen, that it was assembled incorrectly and the fan-wires were pinched.

@Kenprints Ай бұрын

Do you think these heater units could be attached to the bottom of a modified AMS unit from Bambu to make an ams that also dries?

@hakaiyou4532 Ай бұрын

Dan BEEP sound.. damn... think ill go for the EIBOS Polyphemus

@LisaHarsh Ай бұрын

I have dryers but like the dry box. It maybe worth just the dry boxes for the more hydroscopic filaments when printing. Considering it.

@ModBotArmy Ай бұрын

Yeah I could see some that already have dryers just adapting the dry box system for storage. At least as a starting point.

@timtoxopeus Ай бұрын

I really like this, it's modular so you can quickly swap out boxes, it keeps your filament dry once dried, and looks like the core functionality is well thought through. I do have a question though, my printer feeds from the rear, is it possible to place the hygrometer so that it is on the other side of the grommet, allowing the filament to exit the box in the back rather than the front, while retaining the ability to read what's on the hygrometer?

@MrWheezyE420 26 күн бұрын

@timtoxopeus The lid works both ways, so if you need the grommet on the back just flip the lid around and clip it that way.

@pcvanvliet Ай бұрын

I got my Polydryer and extra box this week, and TBH I am dissapointed. The hygrometers are all over the place, and after numerous sessions i cant get the boxes with PETG to go below 25% humudity, swapping the hygrometers also makes it seem the readout is completely random. I have seen reviewers mention that Polymaker made adjustment to the stickers to have them not bubble up, but after 2 days of use my unit is showing that exact "defect". Is 3dJake selling old stock maybe?

@ezekielgml Ай бұрын

I like the dry box portion. not 100% ford on the heater due to cost.

@deecat2018 Ай бұрын

if it can just use hinge and some magnet to close that hot air vent hole thing at the bottom and can just put it on that drying stand without have to take out that feet cover out it 90 euro price is quite high too

@notsonominal Ай бұрын

So is the PA/PC settings hot/long enough to actually dry PA/PC?

@speakoid Ай бұрын

I currently store my filament in cereal storage boxes that are very similar in shape to the box. I wonder if there would be a way of adapting these (cheap) boxes to work with the dryer and hole plugs.

@kylek29 Ай бұрын

Yes, I have my filament in cereal boxes and looked at creating an adapter for the bottom .. I tried to get a Polydryer over the weekend to make it but they're on backorder. Truthfully, the dryer portion itself isn't that difficult, one could get a hairdryer (or another controllable heater source), Arduino, and spend a day writing some rudimentary code to create a very similar "adapted" product using the cereal boxes sealed lift gate.

@jacksoni349 Ай бұрын

Modbot, you should review the Smart Orbiter v3.0 please!

@darrenlafreniere5034 15 күн бұрын

Can't seem to find it anywhere in stock... Is this device available in the United States?

@michaelgleason4791 Ай бұрын

Did you test the hygrometer? Another channel found the ones in this system to be very inaccurate.

@ivyr336 Ай бұрын

The fan inside it looked pretty standard. Maybe a 40x25/20? Noctua has 4020 fans, so maybe a fun little project for one with this dryer to switch the fan for a noctua? Because imo 52dB is pretty bad for a dryer.

@jamescassidy2098 Ай бұрын

4 of these for 320 or sunlu s4 filament drier for 190 i have the sunlu filament drier direct feeding 4 printers and never have any issue with stringing and it looks much better

@elleryfg7853 Ай бұрын

I also think the S4 is more polished well rounded product. That being said a system like this gives you flexibility since each filament has it's own dedicated chamber. You can dry nylon, PLA and any other material with just one drying unit and separate drying boxes. The S4 doesn't have that capability.

@jamescassidy2098 Ай бұрын

@elleryfg7853 True enough, if you need multiple dryers for different fillements, even the single sunlu filament dryers are much more compact better and cheaper. although I haven't used one before, so I can't comment on performance, but I can't see it being bad.

@anthonyz.4560 Ай бұрын

The sunlu looks like a good option if you need to run multiple rolls at the same time. But if you are just running one roll at a time, you can get the combo + 4 spare boxes for 200 and be able to store a total of 5 rolls.

@fharni Ай бұрын

What are the dimensions of the storage box? I am not shure if they fit my cabinet.

@bertkooijmans4769 14 күн бұрын

Poly started with the unheated dryboxes for 180 bucks or something right?. This is a improvement. Too bad its aliexpress hygrometers and a simple ptc heater with thermalcutoffs. Ptc is fine but it sucks they use the cheap crap hygrometers.

@TheToonamiRevolution Ай бұрын

I really want to like this system more. I think it looks pretty good, it seems pretty well thought out. But the price. I just can't get over the price tag. If you wanted a bunch of these boxes Lets say, 10-15 in order to really keep your popular filaments ready to go, its a pretty hard cost pill. If they were like, $20 a piece for just the box, I think I could get more behind it, something about that $30 feels too high. But form and function wise, it looks pretty cool.

@Filmman586 Ай бұрын

Daniel! I like your friend Josh’s dry box set up, is there a link for it or what he used?

@rishirajbose2444 Ай бұрын

Idk if it's the same one, but I use something called the filament bunker. It's basically the same design as the poly box (chamber for dessicant and a hygrometer) made out of a cereal box. There's mods on printables for adding a PTFE tube coupler.

@ModBotArmy Ай бұрын

He has a video on it :) I will add it to the description kzfaq.info/get/bejne/gsqFp9l6uLiqYKc.html

@rohankoripalli Ай бұрын

$80 for the dryer isn't too bad, but $30 per box seems pretty high. I'd probably get it just for a couple rolls if I hadn't just ordered an Easdry

@Rok_Satanas Ай бұрын

someone will figure out a box from ikea or something and a mod for like 10 bucks

@NWGR Ай бұрын

They nailed it with this one. In regards to price, I'm fine with it personally. I currently use a cabinet style food dehydrator but would really like the conveniences that this product offers.

@A1N0 Ай бұрын

I've gone with the PrintDry boxes for storage as about $12.50 each. $30 each is WAY to expensive. Why no thermostat? With the heater they use, they control the power with the fan speed. No thermostat to worry about but not very precise. Probably OK for a dryer box. I have almost 100 storage boxes, so $3000 for storage? I don't think so. That is more than the filament in them.

@TS_Mind_Swept Ай бұрын

It's amusing that the cobalt chloride is only carcinogenic if you eat it, because I don't think that's your biggest concern if you're eating it SuperVinlin Completely with you on the cost thing though; I'd love do you get some of these for their convenience, but aside from the fact I can't afford them at the moment, I would find it hard to justify the cost even if I could.. would be nice if they at least had a buy in bulk option like you mentioned

@user-pk4hn1uz1k Ай бұрын

I'll wait for Bambu to release a combo dryer drybox

@JakJakku Ай бұрын

dry it on the print bed and store in the AMS unit :)

@soggynode Ай бұрын

$30 for the box is pretty reasonable. I did the DYI cereal box a few years ago and by the time I got the box, roller, hygrometer and desiccant I was $25 into it and it didn't even seal all that well.

@justinbaits7149 Ай бұрын

I made 6 for a total of $60. Even accounting for time it is still a much better option than $30 each. Mine also seal fine and hold around 10% humidity.

@soggynode Ай бұрын

@@justinbaits7149 Dang, I should have got your shopping list. The rubbermaid box alone was $10 on amazon back when I got mine. Probably would have helped keep the cost down if I'd been building more than one.

@judd_s5643 26 күн бұрын

I just don’t see this as viable option for long term storage. $29 to store a $13 spool! As another commentator said, A big airtight totes with desiccant is more economical. I have two big Yeti coolers that I use. If my fridge/freezer fails I’ll dump out the filament and save my food. Then dry it two at a time in my EBIOS.

@m97120 Ай бұрын

At 30 bucks for the box it's not really viable as a storage solution. I'd have to spend a couple thousand bucks to store my spools with this. So I'm going to stick with vacuum bags that just cost about $1.50 per spool. But I might get one or two of those units for drying while printing. If they could figure out a way to lower the cost of the box to the price of cereal boxes it'd be a really nice storage option too.

@Polymaker Ай бұрын

Unfortunately we will never reach the $1.50 price point, this is 100% sure :)

@asura_maxx Ай бұрын

What software do you use to edit 3D?

@ModBotArmy Ай бұрын

My CAD software of choice is Shapr3d

@illRun4Clownident Ай бұрын

looks more DIY than most diy solutions

@woodturner1954 Ай бұрын

$80 to hold 1 roll of filament. I use a 4 plastic box's with a seal to hold 4 full rolls each, desiccant a humidity monitor and regularly hold 11% or less. No power required and much less than $80. An it's silent.

@ModBotArmy Ай бұрын

Well $30 to hold one roll. $80 is for the dryer portion which wouldn't be a fair comparison unless you were comparing to an active dryer.

@rockman9h02m Ай бұрын

still overpriced than the DIY solution above

@michaelgleason4791 Ай бұрын

@@rockman9h02mstill apples to oranges

@crowguy506 Ай бұрын

You could buy a Sunlu S1 for just the box and get a complete dryer for each spool for about the same. Or buy a lot of vacuum bags. It’s not a viable solution. The Kickstarter S4 was about the same too, for 4 spools. It’s a one spool per year solution. Not economically viable.

@Superwazop Ай бұрын

You pay for convenience and quality

@DiomedesDominguez Ай бұрын

It's a good solution but it's too expensive compared to other alternatives.

@AndroidA258 Ай бұрын

i use a 10 euros huge ikea box with dessicant inside, and a sunlu drier, this is way too much money

@JonS Ай бұрын

I found this video a little dry. 😂

@ModBotArmy Ай бұрын

I see what you did there 😘

@Alkerion73 Ай бұрын

Very funny, 1 box cost more than a spool, it could be a solution if you own just a few spools, I own more than 300, that will cost me ~10'000$ in boxes.... Plastic bags is the BEST solution.