Got my P1P a couple days ago, which is very similar. Been cranking out parts like crazy and haven’t stopped since. The auto calibration is a lifesaver and makes me actually enjoy the hobby again

This printer has changed 3d printing for me. I use mine for work so its awesome to just click print instead of spending my free time messing with stuff

It's nice to see an update! You should do that for more of your printers and projects! Long term experience outweighs first review impressions.

Very comprehensive review, I appreciate how you looked into every aspect of owning one : from using one to support & even community. Hopefully Bambu Lab sees this.

Great video as always. Clean, concise, and no unneeded fluff. I'm not surprised to see that you like the machine but dang that bed cable was wildly difficult!

Now, this is what I call feedback and a long term review. Thanks for all of these valuable points, very valuable for my decision making!

Love my P1P, once I get some more sales in my shop, I plan to just keep buying more. Eventually I'll pick up an X1C, but the P1Ps are phenomenal and make prototyping new products enjoyable and so fast.

Great video, on the nose with key issues and thank you for making this video and giving feedback on slicing issues, I haven't had any major issues that required posting or anything breaking since receiving it back in mid-September. So far all the info required has been from their wiki, forum, and discord server. It's asham you get to see more than usual the negativity towards a brand, I hope that changes, a well-working printer you almost get not to hear. This printer works great, thank you again for this video.

We have X1 carbon at work for over year now and could not be happier - its such a great tool - we where not super expierienced before and we where using Rise 3d E2 solid but comparitivly on slow and expensive site - now we have 2 X1 carbons and we have so little issues - only one worth mentioning is a lile bit of warping on big ABS prints - becouse of that we Print mostly PETG and prints go of great

I've only had my X1C for a couple weeks, but so far it's been nothing short of amazing.

I used to have the Mk3 4 years ago but it required a good deal of tinkering and even though it was fun I decided to give it to my son who makes it sing songs even to this day (obviously he's more skilled at this then I am). I recently purchased the UniFormation GKTwo Resin printer ~2 months ago and completely love it but there are applications that a filimanet printer would lend itself better so based on a slew of videos including this one I ordered the X1 over the Mk4 today and can't wait to have the same experience many others have had and of course 2 printers are better then one ;-) Thanks for the video!!!!

I have a friend with one of these and he prints some incredible stout parts. I cant wait to get one for myself.

Thanks for skating this very informative video. Youve answered a lot of questions that I had. Im still looking and definately considering making the purchase. Im long overdue for an X1. Hopefully I'll get my hands on one soon.

Love my X1C! Can't wait to see what the next gen is like and tank you for putting out a well thought out video!

I have had mine for a few weeks so far I'm liking it alot. I am happy that I got the X1C with ams.

Nice balanced video. Good to see an honest and clear account of your experience with the X1. I don’t own one myself (nor would it be at the top of my personal shopping list) but I appreciate the innovation and features that some people find attractive. It’s definitely shaken up the hobbyist 3D printing scene.

Thanks for the update on the 3D printer.

Thanks for this! I've been fairly satisfied with my X1C. Recently started to have minor mechanical issues that needed tending to, most noticeably my first nozzle clog! Which took forever to deal with - plastic had managed to back up into the cold end of the nozzle assembly when the hotend fan plug wasn't seated properly after a nozzle change - but eventually I realised that "this is hardened steel. My pin vise uses cheap AliExpress bits. There's no way they're harder than the nozzle." And then used a 1mm and 1.8mm drill bit in my pin vise to clean it out. Other than that, my only major issue has involved some low-quality ABS not sticking to the damn bed, but I think I've finally figured out how to cajole it. I think I was overheating it in the drying box before it got into the printer. So that's not the X1C's fault! The heads-up about the bed cable is good to know, I'll keep an eye out for symptoms. I'm about 6 months behind you (and suspect my duty cycle is lower) so this gives my a good sense of what to watch out for in the future. So sad to hear about people being jerks on the forums etc, though. :(

I did the same thing just figured it out and ordered a cable which was the fastest route. I agree with you 100% when you say if this is your first/maybe even second printer dont expect to repair yourself.

I love my x1 carbon combo. Best printer I’ve ever purchased.

Love my p1p, it has worked flawless. Will be adding x1c soon

Excellent printer, I have been playing with this and ventured into the cad world. What a trip💪🇺🇸😎

I’m one month in with my x1C and I love it. Only issues I have is the AMS slot 3 tends to not pull out filament all the time

Overall great printer, except for the heat bed cable issue which was a bit of a pain. Once installed, was seamless. Highly recommended

recently been thinking about picking up a X1 so this review comes at a perfect time

I have had my X1C for a few months now. Great machine! I have had very few problems and most being self induced. I print mostly pla, pla+ and Tpu. The machine has been reliable and I bought some parts with the original purchase but so far no need for any of them. I did switch to an after market PEI built plate because I do not like using the glue stick. Looking at buying a second but waiting hoping they will introduce a bigger machine.

I just got one over the weekend! This thing is amazing! So happy! I need a few more! Thanks for the input by the Way Love the channel brother!

Wow one year already? I am so looking forward to what Bambu comes out with next and what the rest of the industry comes out with in response to Bambu's product. Its looking very interesting for the future in 3D printing.

A friend's son bought one with an AMS and LOVES it. My concern for myself is the noise level. Thank you for a great video detailing your experiences with the unit.

have been looking at this printer for long time now.. And have come to the conclusion that I will buy one with the AMS kit this week :D

Well said 👌🏽 I love my P1p's. They've made printing enjoyable again. They JUST WORK

Mine will arrive tomorrow. It is my first printer, and I've actively put off buying a printer from the very early days because I'm not really interested in 3D printing itself, I'm interested in owning one or more tools that can efficiently make niche parts that I cannot easily find elsewhere. I'd finally had my fill of spending several hours on a weekend afternoon looking for an obscure part that I could easily model in about an hour, so I did some research and landed on either Prusa or Bambu. I ultimately decided on the Bambu because about 50% of the parts I need are for outdoor use, and therefore, ASA capability out-of-the-box is important to me. The Bambu represented a better value proposition in that regard. We'll see how it goes!

Very helpful. Thank you. I am looking at this printer and found your review helpful. I am not wanting to be a tinkerer so I am looking for something that just works. Maybe there isn't a 3D printer yet like that. Sounds like this one is close. Thanks again.

I am looking at this printer to replace a old de-funked printer to print ABS, reinforced nylon & Acrylic for engineering prototypes and new designs. I appreciate your review as it was not long and drawn out but very informative.

Sold my Voron 2.4r2 350 to get a Bambu X1C instead and it's a total paradigm shift in terms of useability. So far my X1C has been the most reliable out of all of my printers and I am very happy with my purchase.

I have enjoyed using my X1 Carbon 3D printer but had an issue with the original (I was one of the kickstarters) AMS. I had to replace an AMS first stage feeder and it was LOTS of meticulous work. I never could get the AMS to work properly so I gave up and actually quit using my X1 Carbon for many months. Recently I got back into printing and tried the manual feed method. It works but it doesn't seem as nice as having a working AMS so I decided to buy a new Ams (being that they are on sale) and hope that the quality of the AMS is more reliable. I do have to say that Bambu Labs has been very good at responding to questions and I like the fact that they continue to improve the X1 Carbon slicer/software. They seem to really care about the high end quality of their product and it is refreshing to see that they continue to move forward. It's great to get back in the 3D printing hobby.

I have been watching a lot of videos on this printer, I have an invention and looking to make them from carbon fiber. I don't know how many I might need to keep up with demand and I want to make sure that I start out right and not have 10 or more of the printers and regret buying them down the road. So far they look pretty good and will have to try one and build from there, thank you for your videos

I've been using my P1P so much that I almost forgot how to use the other printer I have. P1P has been the single easiest pinter to use along with Bambu Slicer/OrcaSlicer.

full honest review. I like it! I'm hoping to buy one soon but waiting till after christmas. I'm a Ender 3 user with 3 printers but sick of the tinkering. I want a Core x y thats going to work out the box and seeing other videos it makes me want to hit the buy button now.

I've had my XC1 since Christmas, nothing has broken or worn out yet. I just did my 1st maintenance I must have run 30 rolls of PLA through it. I've had 2 jambs at the AMS one which was caused when it was switching to a new roll. I just bought my 2nd XC1 along with a bunch of spare parts, Textured PEI plates etc. I have 2 Crealitys sitting next to the XC1s collecting dust. I have become a Bambu Fan Boi

I've been going back and forth between this and the Mk4 (for purchase), and you tipped me to the X1 Carbon. I appreciate your knowledge of the printer and acknowledgment that it's not perfect, but that Bambu has been hard at work to improve it.

Daniel, Glad to see your experience is still overall positive. I've had my X1CC for about 6 months now and I love it for most of my printing. I have a long running issue with Bambu (since February) that is preventing me from fully utilizing the printer for Voron Print it Forward use. In short, any time I print a horizontal hole (in the z face of a print) - like hex nut holes or heat set insert holes, they print squished (like an oval). There are several other owners having this experience and we have open support cases with Bambu. We're convinced it's a hardware issue (I can print the exact same STL on my Voron and it prints pristine) and are working the process thru with Bambu Support. Other than that, it prints all my Etsy items near flawlessly and I enjoy the hands off, turnkey printing operation. Thank you for the review!

I print simple parts in ABS with my X1c like PLA. Ist amazing to see, a little bit like magic.

I got my X1C and AMS mid january and have absolutely loved it. I have a prusa mk3 with a revo, a heavily modified ender 3 and a voron 0.1 my prusa and X1C are both workhorse printers that i never have to mess with. My ender is a hobby project and i love my voron. I am pretty invested into printing and tinkering with my printers, but have two printers that are always ready to print is so nice. I have put over 800 hours on the x1 all using the AMS and have not had a single issue with it. The only “modifications” i’ve done to the printer are adding the bento box filter and putting a WhamBam plate on it which i couldn’t recommend enough. I have only had one or two ams clogs other than that the printer just works.

👍 on video for comments on Bambu improving post-sales support and future revisions focusing on easier repair for the end user, and finally, for a business service plan.

It has for sure been more maintenance than I had thought it was going to be when I bought it. Overall I am super satisfied with my purchase though and would gladly buy it again. It did push me to finally take on Klipper and have since upgraded a good number of my old printers. That has probably been its biggest impact on me, making me realize how badly other printers suck.

Just got a good PEI bed from Bamboo. I print mostly in PLA so that’s been my favorite print bed surface. I haven gotten the camera working in real time yet and the directions on line haven’t helped. I’m using a WYZE camera I’ve had for years just sitting on top the printer.

New to 3d printing, this is my first printer and really enjoying it. Thank you for the 1 year update. Maybe a vid or some suggestions on how to protect the bed cable from getting damaged. Would be greatly appreciated.

Hi Daniel, I have been searching for a good printer for a noobie like myself in this realm. I've wanted the bambu carbon for xmas but had to put off. Then the P1P came out and I was like wow - now which way do I go... My son gave me, or should I say let me borrow, his Geeetech A20M printer. I immediately upgraded the extruders to all metal and replaced his hotend since it was totally clogged. I also adjusted all the rails and bed to get rid of all play as well as replace the removable magnetic flex platform. Installed the auto 3D Touch and upgraded the firmware to suit. My son was impressed and wanted to do the same upgrades but didnt have the extra funds since he go married. I asked why impressed since he knew my background. He just said that was 30yrs ago... freak'n kids. I'm still waiting for him to drop off some of his new filament since his old PETG, that was on it, is really not working well. (1yr since he played with it) ANYWAY - I want to make Flight SIMMs and make glass style cockpits. Maybe relive my youth and build a few classic muscle cars. So which printer should I get; the X1 Carbon or the P1P w/AMS? PS... Don't tell the wife...lol

Another great vid dude! I havent jumped on one because I wanted to see the wide release first. The second reason I havent grabbed one, besides the entry price and proprietary parts..... It's too small. I really think any machine over $1k needs to be over 300mm in each axis. I'm really impressed with this, but for the work I do, It needs to produce full parts. More interested in the P1P tho, loving the case mods people are making for it!!

I had the same issue with the cable. A wire had an open. I repaired the wire. Bambu did send a replacement. Still, this is the best printer I'll ever own.

Good video, that so much work to replace a cable. And 4 day wait for a tickets response is long i guess i been spoiled by prusa. Yesday i waiting 5 minutes for prusa support just verify some information and they got me answer in less that 5 mins for non tech issue.

Great review. Just purchased and should be here in a couple days. Coming from Prusa and Ender

Bought the P1P so far very happy printed over 2 full rolls so far only a few mistakes Have to say my fault . This is my first 3d printer love it so far printed enclosure put the glass top on waiting for door and sides putting top on temp 86 degrees inside raised it 16 degrees. Had porinter 8 days

Great video! I’ve even seen some content creators semi-bash Bambu for things that all new companies go through. I don’t have a Bambu, nor do I feel that I need one, but I do feel that the company is working towards becoming more like Prusa. Time will tell. I’m luving my Rat Rig V-core 3.1 500, though I have run into several issues with it too. The worst part with Rat Rig is that while the company does provide support, their manuals are absolutely terrible. I am not color blind, but their manuals use colors for everything, and it is extremely difficult to follow some of them. I know people who are completely color blind, and only see shades of gray. It would be impossible for them to even attempt one of these builds. On a side note, I recently discovered some extrusion issues with PrusaSlicer that have made their way into all of the derivatives as well. The slicer over extrudes, and depending upon your settings, it can compound by up to 20%. I was able to learn through trial and error, the the Extrusion Multiplier for all filaments needs to be set to 0.965, which works with all 3 of my printers. Because it works for all 3 printers, it definitely means that it is Prusaslicer that is over extruding, as I perfectly calibrated the extrusion on all 3 machines. The next issue is that PrusaSlicer does not work that well if you are not using the “Default speed” Print setting, and use percentages for virtually all of the other speeds. This has the added benefit of making it easier to create multiple speed profiles, and seems to prevent the additional over extrusion that occurs when you use fixed speeds. I’m using SuperSlicer, as I have been tuning it’s profiles for quite a while, and this over extrusion issue totally destroyed my profiles when I upgraded to the latest version. It looks like the bug(s) were introduced over a year ago.

I keep the wall generator on Classic still, Arachne always leaves gaps that I have been too lazy to figure out how to get rid of lol. I have x3 X1C's, x2 P1P's and x2 AMS and so far, I haven't had too many issues. I have had a few minor issues that they were quick to get back to me with suggestions that worked. So far I have been really happy with them. I just tried a new ABS profile and wow, the prints are literally perfect, very happy there as well. I also built a Voron 2.4 recently for a larger build volume and am enjoying that process as well. Great video and I hope it helps a lot of people make their choices one way or the other.

great review... considering at this point in time so this comes in handy. Thx

I had to replace my heat bed cable yesterday aswell. Super tedious process and it was incredibly annoying. But the $50 store credit is nice!

Noise level, small bed(for my needs) and AMS waste is why I'm holding of purchasing one. Waiting on Prusa XL with toolchanger which will suit my needs better. Its just been a long wait but hopefully any day now.

Can't wait for the next generation from BambuLab and how they can improve on the X1C. I hope that we don't have to wait too long for the next printer of them.

I’m looking into a 3D printer and appreciate your input.

I eventually am going to buy a Bambu printer simply for the AMS, it is easily the best multi-material system on the market at the price point by a long shot. But the maintenance is why I have yet to spring for one of these printers. They are seriously impressive, but for the moment I'm still hesitant. Crazy to think these have been around for more than a year now,

I wouldn't expect everyday users to get the kind of service ModBot gets. I got stuck setting it up my PIP and started a ticket. It was like 2 months before Bambu got back to me, and I had solved it by then.

Another happy X1 owner here. Out of my 4 printers the X1 has become my goto printer. I never thought I would enjoy using something more than my Prusa. Speaking of the cable do you think there's anything preventative that can be done before the failure? I wouldn't mind taking it apart to change the routing or throw some tie wraps on it if you noticed any areas for improvement. Also the X1 has pushed me to work on upgrading my other 3 printers with Klipper to bring them more inline with the performance of the X1.

Good video, which brings up both positives and negatives. Personally I would love to have one with AMS, so I could print multicolored parts, but no room in the budget for that sadly. It costs something around $2300 here for the X1C with AMS.

I too had to replace the bed cable and oh man, was that a time-consuming and tedious task. They really need to update their design to make this type of maintenance work easier. Otherwise, I've been pleased with the printer as a whole.

573 hours so far and no issues, Im the type that likes to be prepared though so large pile of spare parts that may never get used

This was incredibly helpful. I'd been considering getting a Bambu Lab printer for a bit, but this has made me rethink it until such a time that they've made the improvements you suggested. I see that this video is 7 months old, will there be an Update Update?

Didn't send all of my order yet says it's complete, ordered the package and bought an extra reel holder so I could do 8 colors. Tried emailing no response, called the number on the receipt and got a telemarketer in florida. My bank is dealing with this and if they want the unused package back they can pay the shipping.. Was so excited and now disappointed. Thought buying it in the USA would make a difference. Glad others are enjoying it.

I've only got around 150 hours on my X1C, but I've only had a couple failures, and they were my fault through either moisture in the filament or using the wrong plate for a filament that doesn't bond well to it. Everything has worked flawlessly otherwise.

I enjoy your channel and reviews. I recently purchased a Bambu labs p1p and am having a lot of trouble printing Ninjaflex. I have successfully printed this on my ended 3 s1 and even my old dremel 40d. Have you been able to print it on your Bambu lab printer. Also it seems that the filament has changed. The surface texture of the new rolls feels different. Love to hear if you have any thoughts.

I’ve been waiting to click Buy on one of these but the noise and a few other things have me waiting to see what the next incarnation brings. Maybe a bigger print volume?

The X1C is on my list to completely replace my existing 11 printers (looking to offload them, then just start over with Bambu)... but I haven't decided if I want to wait to see if they release a X1C++ (or what ever the next iteration is) before I bite the bullet all over again.

I cannot believe it's been a year already!

I got my a week ago. It hasn’t stopped printing since day 1.

could you do a comparison between the new fast core xy (creality k1, x1c p1p and the quidi printers) and what printer suits what

I am still looking at this as a first FDM printer. I did not like the idea that initially I would need to go through their cloud to run my prints, so the lan mode is certainly a big step forward. Is there a way to write sliced prints directly to the SD card now or would I need a different slicer to do that? I have been using lychee for my resin prints. Does anyone have experience with how lychee would work with this or is that a waste of time?

I would like to hear more about print quality / finish & dimensional accuracy at the high speeds offered by the X1 Carbon. As a hobbist who prints functional parts that require dimensional accuracy and smooth finish, I wonder just how useful high speed printing is given these priorities. To date, I have been unable to find any information regarding this topic and would appreciate your input.

Great video. I’ve had a Raise3D Pro3 for just over a year and love it. I’ve gotten near-perfect prints every time in ASA, PC, TPE, PETG, and PLA. They also have terrific customer and tech support, but it’s an expensive printer. For a second machine I’ve been looking closely at the Bambu X1 and this video has some great insights.

Nice vid! Been a subscriber since your 360 modding days! 💙

Confirming that as much as I want one, I will wait for Gen 2. 😉

Thank you for the video. Just started with my X1. Having some trouble of bed adhesion with ESUN black Matte pla - just bot sticks well on plate in some parts:(. Any thoughts?

Great review. Thanks!

Mine comes tomorrow!!! 🎉

Considering this as my first ever printer, hoping it’s a smooth transition into the 3d world, I just want it for bits and pieces in my wood workshop so no real heavy use

Hi, I have a question regarding this printer. Is this able to print the detail for shoes miniature with dimension around 10cm x 4cm x 4cm? Previously I have been using the elegoo resin printer to print it out. But I saw the result of this printer is good and comes out with coloured end product. So i want to know the technical spec

Great review. For the X1 Carbon what spares kit would you recommend from the experience you have had. I will mostly be using it with Nylon & Carbon Fibre filiments. Is there another printer your would suggest I look at for these specific Filiments. I am a small scale Industrial Fabricator mainly working in Agri-automation.

just pulled the trigger on one... X1C with Feeder. Still reeling from the sting

Great information. Question, keep having issues as I have loaded spool bay 3 all is set to go and the AMS retracts and loads spool bay 1. Always happens, yes I select bay on both AMS and while in the "Device" via computer. I have seen others mentioning same issue. Any thoughts? Thanks

I am considering getting my first 3D printer, and while also considering the Prusa MK4, then the Bambulab X1C maybe with the AMS seems pretty nice. Reason for reaching a little bit higher than just a beginner 3D printer basic setup is that I know I will only get space for 1 printer, so it should cover both whatever I can think to print just now, and maybe what I would in the future. Also would not go for a printer that requires a lot of tinkering to get to work or keep it working. Thanks for a nice review after 1 year of usage. :)

would bw nice to see k1 go head to head with any bambu labs machines

Have had some retraction issues with the Sunlu PLA.... does the PLA you're using here function properly in the AMS?

Great video. I contacted Bambu support in regards to improving on the serviceability and the heat bed cable issue referenced in your video - at first they responded with a generic reply and didn’t even answer my question. When I stated that they didn’t answer my question they replied again generically and said yes they fixed the problem. I have no reason not to trust them but I am skeptical. I definitely would buy this printer however you showing the 40 screws and the two hour time frame to replace something like that is preventing me at this time I own 4 Prusa MK3 machines and they are amazing and are easy to service. But they’re MMU is horrible from what I hear. If you happen to have time to respond and are aware if they’ve improved on this issue that you experienced I would love to know. Thank you.

I too had to send my unit in and get a new one. A couple months later I am having a similar issue with my heatbed. I got into trying to check the cable and the instructions were similarly incomplete and it appears that my system was shipped missing parts. I am a little disappointed with the number of issues I have had with this thing considering how much the system cost. When it does print it does a great job but my operation tempo doesn't have a lot of tolerance for a tool that fails every couple months, sometimes requiring weeks to get back up and running.

I'm very tempted by Bambu Labs printers, I'm happy to tinker with my 2018 Ender 3, but I'm not fond of the speed. I'm debating one more upgrade to Revo swapabble nozzle direct drive unit or just diving in on a P1P. Or I may just wait for the next Gen... I'm in no rush.

I love love love mine. I can fix anything. Anything. So fixing it, occasionally, is not wanted but willl be tolerated. Don't know what I'd do without it, now.

I cant wait to get one of these i currently have an ender 3 pro

Just found out about this printer. Nice review too. Could unexpected high sales contribute to slow customer service?

Just got my p1p, worth the headaches imo. But i also had a lot of headaches with ender 3's lol

Based on what I have seen and heard unless you are a KZfaqr or influencer from the community helpful support from bambu is rough. I pretty much accepted the fact that the little guy is on his own with this printer. I seem have that same issue with the walls when working with ASA I use Orca and tune in each roll and it seems to fix the issue. Definitely feels like they haven't gotten the scanner working right for ASA, ABS, and non-CF Nylons. Works great with PLA and PETG.