Bambu Lab X1 Carbon Review - CRAZY FAST 3D PRINTING!

Рет қаралды 264,265

Күн бұрын

My Review of the Bambu Lab X1 Carbon that launched on Kickstarter and is now making its way out to its backers.
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoffee.com/UncleJessy
You can order a Bambu Lab X1 3D printer here ➜
bit.ly/BambuLabUJ
Bambu Lab X1 Kickstarter Campaign ➜
www.kickstarter.com/projects/...
Files used in this video
Loki Crown & Daredevil Helmet by NikoIndustries ➜
www.nikkoindustries.com
Samurai Darth Vader & Soldier Boy Helmet by Yosh Studios ➜
/ yoshstudios
Articulating Storm Trooper & Dragon by Creature Crate ➜
/ creaturecrate
Pooping Balloon Dog / Yoga Dog by ChaosCoreTech ➜
thangs.com/designer/ChaosCore...
Sandman Skull by Hex3D ➜
/ geoffro
X1 3D Printer Purge Bucket by Cleberlop ➜
www.printables.com/model/2540...
_______________________________________________
Gear I'm Using ➜ www.amazon.com/shop/unclejessy
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
KZfaq ➜ / unclejessy
________________________________________________
Thanks for watching!
#Bambulab #3DPrinting #cosplay

Пікірлер: 311

@UncleJessy Жыл бұрын

I will be looking at a followup video in a month or so to see what might have changed in the firmware/slicer or just covering new things after a month+ use! Checkout Bambu Lab X1 Carbon bit.ly/BambuLabUJ

@ka0skontrol504 Жыл бұрын

I've already pre-ordered mine. Wish I had known about the Kickstarter sooner but I didn't. I'm actually hoping that they'll offer ruby nozzles as an option for printing metal filled filaments.

@ka0skontrol504 Жыл бұрын

Print a lazy Susan...or some castor wheeled platforms to put under the feet (preferably with wheel locks). You could use it. Just saying.

@UncleJessy Жыл бұрын

@@ka0skontrol504 😂🤣🤘

@ka0skontrol504 Жыл бұрын

@@UncleJessy looking forward to your follow-up videos on this printer since my brother and I are going to be using it to prototype a project of his.

@cdsmakestuff Жыл бұрын

There are rumors on the discord of another slicer update coming soon that possibly has the arachne slicing engine

@GraylightSynes Жыл бұрын

As Angus said, 3D printing has been so accustomed to cheap and mediocre printers for so long that products like these rattle the entire industry. Which is good! We need people to come along and shake things up and show that we don't have to settle for poor performance and poor reliability (and cumbersome tinkering to get even a baseline level of functionality). We CAN and SHOULD be able to print things smoothly, quickly, and easily.

@bnut1979 Жыл бұрын

Agreed! Bambu Labs has thrown down the guantlet. I have been 3D printing for 4 years now and printer tech, at least at hobbyist/entry professional level, has been stagnant. It's time for some competitive innovation!

@terryphan7451 Жыл бұрын

Will be picking this up for my next Printer. I upgrade for Anet A8 to Prusa for reliability, but this printer is next level.

@heroflying Жыл бұрын

I got this printer, and I'm blown away by how good and reliable this damn thing is. I threw bargain basement PETG in I'd never used before, printed someone a Satsana duct for someone, even freakin m3 nut recesses printed vertically with no supports were absolutely spot on perfect. Default PETG profile but just had to up the bed temp to 70C intstead of 60C, no flow tests, retraction tests, no esteps, no bed leveling, nothing else otherwise. It's an amazing printer.

@heroflying Жыл бұрын

@@chubscub That's not me, I call a spade a spade. Not sponsored, didn't get one for free, etc. Too damn lazy and busy to get into any of that. I barely even post on youtube, just my FPV drone flights when I feel motivated enough. lol

@kalihban7212 Жыл бұрын

@@chubscub so people can't be happy with a genuinely good product?

@DisorderedArray Жыл бұрын

My X1 Carbon arrived yesterday, so I've only done a few prints, but it's crazy. It's so fast and accurate. I'm very happy with it, and I got the early bird backer price. The one downside so far: the internal led illumination is quite dim.

@UncleJessy Жыл бұрын

So amazing to hear... this printer is going to finally get me to start printing with more materials beyond PLA

@heroflying Жыл бұрын

@@greatestevar You talk like a troll; I don't care.

@arnoldbailey7550 Жыл бұрын

Quick printing tip: If you want to reduce support material, add a detached simi circle frame or arch, below the support area. The semi circle doesn't need support but the support structures will print ontop of the semi circle or arch. Just ensure your settings overhang angles are correct. The arch provides a space between the base an the area that needs support but uses a ton less material.

@MrButuz Жыл бұрын

Er...wow! Gonna try that!

@arnoldbailey7550 Жыл бұрын

@@MrButuz Hope it works well for you.🍻

@aiddaphomvisay9422 Жыл бұрын

Dang, why haven't I thought of that lol; gonna try it, thanks!!!

@davidmartinez4782 Жыл бұрын

Just bought my second 3D printer because of you, awesome videos! Keep it up😁🤙🏽

@maggotDTV Жыл бұрын

Thanks man, now I’m in trouble from my wife for preordering a 1500 dollar printer. Hope you’re happy Jessy

@gunes3752 Жыл бұрын

👏🏻🤣😂😂😂

@xeroblastx 10 ай бұрын

Lol same here

@sgsax Жыл бұрын

I've been seeing a lot of chatter about this and was curious what it was all about. Thanks for this great review, answered all of my questions and was super informative about its pros and cons. Definitely one to watch out for. Thanks for sharing!

@806BigMike420 Жыл бұрын

Seriously considering this printer, thanks for the review!

@MirageC Жыл бұрын

Awesome review man. Precise, condensed, well structured and objective. This printer is very impressive. Thank you.

@mitchimal Жыл бұрын

My first fdm printer and man I am SOOOOO HAPPY I waited for a machine this good

@airquis Жыл бұрын

Okay I’m sold I was staying away from 3D printing due to the extensive troubleshooting but this is EXACTLY what I need. Plug-n-play

@BIowfish Жыл бұрын

Patiently waiting for my KS delivery! Great video, can’t wait to print with mine.

@UncleJessy Жыл бұрын

you're going to love it... well minus removing the bolts from the bed during the unboxing haha

@AdamMclardy Жыл бұрын

Finally pre ordered mine. Crazy that this will be my first FDM printer

@johnson6048 Жыл бұрын

Great video. You covered everything really well, even twice on some things, and I like your delivery & presentation. I'm looking forward to when they get more of these in stock. The Prusa XL is out of stock as well. Trying to be patient.

@FireDragon3D Жыл бұрын

We are getting closer to the point where the 3D printer is becoming an appliance. We aren't there yet, but we are getting closer. I picked up the P1p and am completely blown away and at the price point of $699 is truly insane. I'll have more videos up on the P1p so others can see what the other Bambulab printer can do. It's truly amazing!

@AppleiOSGenius Жыл бұрын

I have pre-order the x1 carbon combo and wow that mask fits perfect

@cdsmakestuff Жыл бұрын

Just waiting on my X1CC... Hopefully soon, my # is getting close... it's spot in the studio is all ready for arrival.

@__--JY-Moe--__ Жыл бұрын

U get'em Jess!!

@Robothut Жыл бұрын

Keep us posted if they add the filament load function and the memory function for storing sliced projects in the printer. I will order one once these have been sorted out. Thank you so much for the video showing the good & the bad.

@TMS5100 Жыл бұрын

I got the kickstarter x1c with ams and it's absolutely amazing. Only reason I'm keeping my raise3d n2 is for the 300mm^3 build volume. If bambu releases a larger printer then the raise3d is gone for sure.

@BODY3D Жыл бұрын

This machine IS a revolution ! 😁

@michael.knight Жыл бұрын

Great to know that hair spray works just as well. So much more convenient than glue sticks!

@Christobevii3 Жыл бұрын

I've never used anything on this bed to stick. That is with bambu labs pla, cheap gst3d (bankrupt?), and polymaker pla. It feels like cheating.

@bipolarchemist Жыл бұрын

Gotta love FedEx. Glad that it was the beta unit you were returning and not yours from the campaign. And fast is good, but the biggest draw for me is the reliable part. Sure, there are issues but it still appears to be more reliable than a lot of the available options out there and it seems to work near flawlessly with a wide variety of filaments. I can't wait for mine to arrive and yes, I agree that a 300mm³ or larger build volume would be amazing.

@omnitron Жыл бұрын

Great review.

@learnMax Жыл бұрын

Wow, talk about an enthusiastic review! But, I would have liked to see a comparison from other printers on that curved top layers issue to see how much is a slicer vs printer problem, and some more specifics on the "speeds and feeds" that it's using, again for comparisons to other printers, particularly other CoreXY configurations..

@SkeeterPondRC Жыл бұрын

Ive been debating between this and the QIDI X-CF Pro (I print a lot of ABS and venturing into nylon). Reviews like this are extremely helpful.

@darriusholt Жыл бұрын

Same here. Did you end up picking one yet?

@alpha2turbo Жыл бұрын

Might consider this as an upgrade. Just got into 3d printing a few months ago and recently started selling things. Looking to get something better and faster than my Ender3. I was leaning towards AnkerMake but might get this instead.

@axelfoley1996 Жыл бұрын

I've just received mine...and Bloody hell, it's fast

@juliusfucik4011 Жыл бұрын

If only it had a little bit bigger build volume. I would buy it immediately.

@jaunnaharrison3943 Жыл бұрын

This is so cool

@JonS Жыл бұрын

Higher flow rates call for higher nozzle temps. When I print at 400mm/s on my V-Minion (which is pretty much my default profile), I'll typically print 30C hotter than if I were printing at "conventional" speeds. Those silk filaments loose their luster the hotter you print them. Typically, I'll print at 190C and slow (40mm/s) to get a really shiny finish. What temperature are you using on the Bambu, and how does it compare to the Neptune profile? You might find that it's just not possible to get both speed and luster with silks, as the additives that create the finish break down at fairly low (for printing) temperatures.

@linyongzheng Жыл бұрын

I've had occasional issues with reprinting files. I think it has to do if there is an error sending data from bambu cloud. Agree with the 300mm cube, really wished the machine was larger for the occasional large print. Also, get some sewing machine oil with a long straw tube applicator: my idler bearings have started squeaking and they are a pain to lube because of how enclosed the machine is.

@yoshin-_- Жыл бұрын

Helmets looking mightyyyy good!! Glad you out our files to good use!!

@UncleJessy Жыл бұрын

Heck yeah! More to print as well! Fantastic Patreon!

@spoton6584 Жыл бұрын

Been loving mine for 3 weeks now

@UncleJessy Жыл бұрын

Congrats! This thing has been printing non stop. Such a wild machine

@mathieubouchard5117 16 күн бұрын

The AMS with differential Material Interface for Supports is really a God send I find.

@nostrodamus1980 Жыл бұрын

Im glad your beta unit was just a raspberry of the batch, shame they couldn't get to see what the issues were, maybe bad firmware or something. Talking about firmware, now that they are shipping units retail we hopefully will see more concentration on firmware and software side of things as it seems that is where the remaining kinks are. Nothing looks too serious to hinder how good this machine is though and so nice to see a company take a risk on a new design and features. Im both looking forward to my printer coming and also where this printer is going to go. Im happy to purchase proprietary parts as long as they are reasonably cheap and allows to continually fund BambuLab as long as they continue to maintain and develop this and future machines.

@storageaddict Жыл бұрын

Great video, the printer looks like a solid machine! Side note, please print a cod piece for your Ironman mannequin in the back! Letting your man catch a breeze there.. haha

@luisone1559 Жыл бұрын

All my print are coming out crazy smooth

@UncleJessy Жыл бұрын

even at .28 most of my prints are super super smooth

@sirgeekcsp Жыл бұрын

I just pre-ordered mine.. After seeing the 12th or 13th vid saying buy this if you can afford it.. I ordered it.

@MoTheBlackCat Жыл бұрын

Great review and hey you can use those saved 6h of printing to sand!

@TechKingGame Жыл бұрын

Hope to see a comparison with the Ankermake m5…surprised you didn’t mention it here!

@ippaku Жыл бұрын

Nice video as always. Just spent today printing with my first printer the Neptune three got it set up that one print down other prints going what a journey. be well be you.

@TheOystei Жыл бұрын

If i get this i would get the ams, not for doing multi material prints but to be able to do different prints of different materials without having to change them, using the rest of a spool and continue with another etc.

@slamoto2 Жыл бұрын

this thing will be insane with a 0.6 nozzle. Please give us an upgrade on how it works with that nozzle

@OHshik3D Жыл бұрын

At the 7:33 mark I'm now noting to myself that when I get this printer the first thing I'm buying for it is a lazy susan.

@dontorres8037 Жыл бұрын

I LOVE my X1-Carbon! SUPER DUPER Fast... I have to build a stronger table for it. It's moves so quickly, that the inertia for the relatively light head creates a lot of vibration from my table. But even then, there was NO ringing etc... Setup was super simple (just remove 3 screws with included long hex wrench that have red tags and cut one zip-tie) and I was up and running right away. Total setup time (including reading the quick start guide... yes, I watched THAT live show) was less than 15 minutes and most of the time was spent waiting for the calibration.🥰🥰😍

@matthewd9356 Жыл бұрын

Have you tried throwing a paver with some anti-vibration feet under it yet? Might save you the cost of a whole table/desk.

@gunes3752 Жыл бұрын

Bist du immer noch zufrieden 😊

@dontorres8037 Жыл бұрын

@@gunes3752 Unbedingt! Ich fahre die ganze Zeit mit dem X1C.

@dontorres8037 Жыл бұрын

@@matthewd9356 I have that underneath all my other printers. The X1C is just on a temporary area until I can make a more permanent space for it... My room is getting full... 6 Printers and supplies in an 8x8 space is a bit tight...

@Sean-Jones-bluecheckmark Жыл бұрын

Fedex is the worst shipping company ever. The Pony Express would do a better job than fedex.

@iulianhagea5815 Жыл бұрын

I agree with you 100% From 1 week delivery turned in 1 month and 1 week.

@tophatvideosinc.5858 Жыл бұрын

Bro never heard of DHL.

@alexangelino2392 Жыл бұрын

To chance your uploaded prints to sd card go to the levers and print options. Then at the bottom there is a cache cloud print to sd card option

@slickman1953 Жыл бұрын

I'm still waiting for mine, did a pre-order on November 1..

@onihensen Жыл бұрын

Viggo Mortensen + Dave Coulier = uncle Jesse 😂. Looking forward to more content brotha

@shanobix Жыл бұрын

Ok I’m sold

@shawnscott9704 Жыл бұрын

Wow the carbon is fast holy crap!

@EvilSpyBoy Жыл бұрын

I have.... one that I backed that should have shipped in July (it was June KS with a July ship) that hasn't arrived yet (Australia they shipped by Sea and I have to wait for it to arrive and then be sent via a local distributor) and I already pre-ordered a 2nd because I didn't realise that i could fit 2 in the place I was going to put it until afterwards (so missed out on the savings). But I really wanted to receive the first one before having to pay the remainder of the pre-order on the second.

@blindsay Жыл бұрын

I have a printer that i have fun modding but something like this that i can just plop out of the box and have it go fast sounds awesome. I think this will be my next printer. Definitely hope they make a bigger one in the future

@UncleJessy Жыл бұрын

It's really a nice change of pace and I have to imagine most 3DP manufacturers are closely watching to see how this machine does

@ka0skontrol504 Жыл бұрын

@@UncleJessy In that case, I feel like we should use this to send a message to them: get to work 🤣

@blindsay Жыл бұрын

@@UncleJessy Went and finally placed my pre-order today, looking forward to getting mine :D

@pigstix Жыл бұрын

I want this or the Prusa XL next. If they make a bigger vesion of the Bambu Labs then for me this wins.

@mahendradhungel8011 Жыл бұрын

Imagine the price going down to like 700 in the used market. Kicking pursa's ass out of the water!

@charlesrestivo870 Жыл бұрын

Nice videos no baloney moves along

@roland2864 Жыл бұрын

We need a top 5 fastest printer list!

@glendavis1645 Жыл бұрын

Cancelled my Prusa XL pre-order. If I upgrade from my MK3 I'll probably go with this.

@LisaHarsh Жыл бұрын

With the AMS unit there is a load and unload functions. There is a single layer top checked I had to uncheck so the top layers are better. My issue is the bed, I went through the three cool plate stickers. The first started bubbling. The other two ripped with PETG even with glue stick over the entire bed. Under the sticker is the same material as the engineering side so been printing on that with less problems. I would like a textured plate though.

@lazyman1011 Жыл бұрын

Don’t tried PETG but I have also the problems getting the prints off without damaging the sticker.

@LisaHarsh Жыл бұрын

@@lazyman1011 honestly been printing off the engineering pei sheet that is under the sticker. I do use the glue stick but once it’s built up I don’t need it again until I clean the bed. PETG and ABS are fine.

@lazyman1011 Жыл бұрын

@@LisaHarsh Thanks for the info, managed a small PETG test print on the cold sticker and will ramp up slowly. On the sticker I felt it’s not nice to have a huge layer of glue after a while, also the prints are very messy but wasn’t releasing easier.

@flepper231 Жыл бұрын

Unfortunately for us in the EU it's 1396 excl. VAT for the X1 Carbon. In the Netherlands you have to add up 21% VAT... That would make this printer almost 1700 Euro (1655 USD).

@CalvinJ82 Жыл бұрын

Did they ever address the load/unload function? Also, the top layer quality, was that ever fixed theough an update? I am considering selling my makerbot method carbon to get the multicolor machine because i am tired of keeping journals and setting timers for filament swaps to change out the color. Great info, thanks for taking time to share. Much appreciated.

@alanjones8560 Жыл бұрын

I was leaning towards the AnkerMake but this video has moved me towards BambuLab. The enclosure is a big add and the quality is stunning!

@UncleJessy Жыл бұрын

I'm still really excited to get my Ankermake production unit BUT there has been little to no communication from them on whats going on with the machine. Honestly really disappointing.

@robthomas3664 Жыл бұрын

I backed BOTH projects. I'd already backed the Anker unit when I heard about this one. Got my X1 last Wednesday, the Anker isn't expected to arrive until November.

@alanjones8560 Жыл бұрын

@@robthomas3664 how has the X1 been for you?

@lazyman1011 Жыл бұрын

They are not really comparable either.

@robthomas3664 Жыл бұрын

@@alanjones8560 , so far, it's been outstanding. A minor glitch with the "sport" speed setting. I need to troubleshoot that a bit. It would be nice if they'd included a more detailed user's guide. I found out through watching other videos that this thing has multiple speed settings, including the infamous " ludicrous" speed. As I'm new-ish to this 3D printing thing, I've opted to hold off getting the AMS unit for a while. Looking forward to that.

@cidizzle Жыл бұрын

hey I've already had mine for a week already. it's awesome backer 3300ish

@remiilatte Жыл бұрын

Hi did you know you can access your sliced files from the bambu handy app and send it to the printer that way instead of reslicing? It’s in your history

@ImaginationToForm Жыл бұрын

I too would like a 300 cubed printer.

@menchieman9835 Жыл бұрын

Hey Uncle Jessy, why not put a rotating turn table under the unit? Might help? Love to hear your feedback:)

@god1aj Жыл бұрын

It’s cool that you actually spend your Money too on some of your printers. I’m jealous of the free ones lol

@NihilisticZebra Жыл бұрын

My thing with this is all proprietary components, if the company go under and you need spare parts you're kinda screwed but otherwise it's very impressive

@matbroomfield Жыл бұрын

Gutted that you didn't go with multi colour. What's the noise level like?

@Joyntie Жыл бұрын

the only thing that stoped me from getting that printer was the build volume, its just to small for helmets. so yeah a 300x300x300 would be an insta buy

@TheIcemanModdeler Жыл бұрын

Reminds me of my old Craftbot Plus.

@henninghoefer Жыл бұрын

15:24 I think you _can_ re-print the last file (files?) from the printer alone: That's why the balloon dog is listed on the internal storage. So, in a production setting, this should not be an issue? You're *definitely* right about the filament loading and the spaghetti detection though…

@UncleJessy Жыл бұрын

You can reprint the last file that you wirelessly sent... when it doesn't have a memory leak or whatever the random issue is but that's it. Only the very last file. It should allow you to print and store a lot more than 1 file from wireless.

@henninghoefer Жыл бұрын

@@UncleJessy Thank you. I didn't know it was only the last one file.

@draskuul Жыл бұрын

I think the load/unload features are there, but just with the AMS. It looks like they need some tweaks for non-AMS use.

@EmbIazon Жыл бұрын

That right there makes it a no-buy for me. How a $1k+ printer wouldn't have functionality as simple as swap filament is beyond me. This means you're unable to use the color change feature in PrusaSlicer. All of my prints are 4 or more colors, but I prefer to manually change filament instead of wasting material. I was just about to buy the X1, too. Shame.

@shenqiangshou Жыл бұрын

How is the noise level? Is this something you can be in the same room of, while it is printing in quiet mode, and still have a work meeting?

@3DMusketeers Жыл бұрын

I would guess that layer issue may be a cooling thing. When it is printing SOOOO fast you may not be able to get enough cooling and will deal with a bit of layer warping causing that ringing you see?

@dylanevans5644 Жыл бұрын

Could be the case - if so this is also an easy software/slicer solve, slowing down the top layers wouldn't add too much time and if it improved the appearance then we'll worth it. I'm a little skeptical tho, as it seemed the top layers were actually a different shape - like where they kg have been concentric circles they actually look more like topography.

@3DMusketeers Жыл бұрын

@@dylanevans5644 Yeah I have no clue honestly, but I figure the speed is a good place to start when diagnosing on it. Could be resonant vibrations or something really esoteric, but might as well rule out the tough stuff first!

@cw_for_the_win3776 Жыл бұрын

Looks to me like its mainly a slicer problem it was way off and a different shape from what ive seen they also have a cooling fan on the inside for certain materials. but idk ig we will see

@jimmysgameclips Жыл бұрын

If Chuck (CHEP) did a profile for this it'd just be done when you came back with coffee

@fuckutube65 Жыл бұрын

Here's an idea to get the Carbon C1 Loki helmet shinier (like the one off the Neptune 2s): Dial down the temperature a bit. Silk PLA contains elastomers to give it that shine, and like with certain TPUs, temperature is key for the shininess!

@toddmolloy311 Жыл бұрын

Or blowtorch just Polish it and call it a day? 😋

@fuckutube65 Жыл бұрын

@@toddmolloy311 That kinda defeats the purpose of choosing silk PLA in the first place, don't you think? ;-)

@jaunnaharrison3943 Жыл бұрын

This is so coollllllllll

@gabegonzalez9684 Жыл бұрын

Out of curiosity, where do you find out about any kickstarters for new printers?

@autofctrl Жыл бұрын

Finally a brand that kicks Prusas ass in multiple ways. 😉 I’m so into buying ..ahm, sorry.. „preordering“ one… and I’ve just only known the brand for like an hour XD Actually wanted to build a VORON. Bambu Labs, what on earth?! You‘ve just messed up my decision 😂

@corty1980 Жыл бұрын

Uncle Jessy, what are the outer dimensions of this printer? I'am looking to replace one of my 3D printers and it's in an enclosure, and have found that most bed slinger type printers are too large. Wanting to replace a 3D printer with a 250 x 250 bed but not willing to go smaller, which looks like the only way a bed slinger will fit.

@Rick-vm8bl Жыл бұрын

Ended up ordering one of these with the AMS, it looks insanely great. I really really hope this prompts the likes of Prusa to up their game - I love their printers but dont think they can get away with selling something based around a ~12 year old design anymore.

@spydergs07 Жыл бұрын

And their MK4 just shows that they are still stuck in their old design...

@Skott62 Жыл бұрын

Hopefully they can come up with a larger unit that does 300-400mm cubed. That would be really fantastic.

@AFroMinZex3 Жыл бұрын

For what? Only if you print big its needed

@Skott62 Жыл бұрын

@@AFroMinZex3 Exactly. Big.

@selinakyle7624 Жыл бұрын

Hi! Great video as always. I bought the printer… could you please tell me the name of the purple filament? Thanks!

@ka0skontrol504 Жыл бұрын

Hopefully they will offer ruby nozzle hotend upgrades among others for printing metal filled filaments.

@kalihban7212 Жыл бұрын

It comes stock with a 30hrc nozzle i think, but i think tungsten would be a good upgrade. I wouldn't use ruby bc it's pretty fragile and expensive compared to tungsten.

@ka0skontrol504 Жыл бұрын

@@kalihban7212 That's a good point. Still, it would be nice to have those options.

@Sycoinc Жыл бұрын

I would love one of these, but just got a Neptune 3 so funds aint there anymore lol

@wulfieluff Жыл бұрын

I wonder if someone can design a tray for the bottom that you just remove to get those bits of fillament out the bottom of the machine

@FPChris 11 ай бұрын

Did you print the PLA with the door open? I heard you have to do that to avoid trapping heat inside

@randomlysatisfying6064 Жыл бұрын

Hey Uncle Jesse👋🏻 You‘ve been printing a lot on your x1, is it already possible to give any information on the maintenance costs? Kindest Regards

@bernardtarver Жыл бұрын

Are you sending and receiving machines to and from overseas?

@aaronbrenkus9126 Жыл бұрын

Speed wise how is it vs say a Super Racer or a V400 from FLSUN? Print size and cost difference is pretty much a wash between the V400 and it so I really wanna know.

@deltaboy2011 Жыл бұрын

Maybe in future they should introduce a 500x500x600 in future while still enclosed and fast printing along with multi material filament when reliable along with the rest of the machine. That should be the future.

@efremtommasi1387 Жыл бұрын

Hey Jessy what about the first layer quality on this one? The printer seems impressive but no one turns the printed model inspecting the first layer (it's only me?)

@MasterRisto Жыл бұрын

Could you possibly share your slicer settings with us?

@2railnation Ай бұрын

Can you put these on a rotating base to deal with reaching the rear?

@bigdsmooth6 Жыл бұрын

Ugh, I picked the AnkerMake over this based on your reviews. Now I get to wait until November to be feeling misled and full of regret.

@xile6 Жыл бұрын

🤔 you are kinda selling me on this. I have the prusa XL preordered but this speed is looking pretty nice.

@Kreated_by_khaos Жыл бұрын

im looking for a new printer ive been using a few cr-10 but i need something for home thats fully enclosed as my cats are ninjas, what program does this use? cura i hope as its the one i know the best

@alexbaronov4736 Жыл бұрын

Does anyone know if this printer is compatible with both 110V and 220V mains? I'm sure the psu for the electronics is, but wondering if the mains heater will behave differently in Europe than in the US.