No video
Model.MT-4.1 Sequentially Coupled Analysis BeamOnFire
Рет қаралды 9,230
Күн бұрын
@lanhlevan948 5 жыл бұрын
You can help me. ERROR: Requested steps were not found in the output database C:/temp/heat-transfer1.odb. Cannot read Nodal temperature data.
@maryamhedayati6211 9 жыл бұрын
Hi, Thanks for the helpful video. I am trying to model the sequential thermal and stress behavior of reinforced concrete exposed to fire using Abaqus. I tried to follow the path shown in the video, but unfortunately no "pair contact" was found to define the conduction between steel bars and the concrete. Just wanted to ask if you could help me with it. Thanks in advance.
@modelingtactics 9 жыл бұрын
+maryam hedayati Currently I am not involved in such a trend in research... How about you try then make a contact later , may be we can work together on such issue .. Wishing you success :)
@janissary08 5 жыл бұрын
Hi dear Helwani, first thanks for your illustrative example. I have a question. Is the gravity load in static step 1 as constant during the fire case in Step 2? Best regards.
@mohamtah2638 7 жыл бұрын
Hi, Thanks for the helpful video. I need an Excel file used in the video. Please put a link to download the Excel file
@dr.vahidrezaafkhami817 7 жыл бұрын
Hi, why I see this error: Requested steps were not found in the output database C:/Temp/HeatStep.odb. Cannot read Nodal temperature data
@chathurikagamage6257 7 жыл бұрын
I have the same issue. Did you find a solution?
@chathurikagamage6257 7 жыл бұрын
Start the predefined field-2 with step 1. Worked for me. It is because there is 9000 steps in Step-2, however, if you read the temperature data from odb you only have 8999 temperature data to work with.
@user-nt4vj1xl2o 5 ай бұрын
can i get your excell sheet please ?
@varun71290 8 жыл бұрын
hi thanks for the video, is there a voice over as well ?
@dr.vahidrezaafkhami817 7 жыл бұрын
Hi, why I see this error: Requested steps were not found in the output database C:/Temp/HeatStep.odb. Cannot read Nodal temperature data. thanks
@Datastician 3 жыл бұрын
Can You Please Give me the tutorial with sound
@shubhamjain6583 2 жыл бұрын
How will you choose time step?
@modelingtactics 2 жыл бұрын
if analysis is static.. time step has no meaning. just choose it so that it is compatible with amplitude time history (if any exists)
Abaqus Acumen
Рет қаралды 12 М.
abaqus tutorials
Рет қаралды 3 М.
Michael Kloos
Рет қаралды 9 М.
Abaqus Acumen
Рет қаралды 19 М.
Modeling Tactics by Amjad Al Helwani
Рет қаралды 6 М.
Engineering Software
Рет қаралды 9 М.