🇺🇸🇪🇸MODEL WASH & PANELING (Model Wash para panelado) by/por Pablo Albornoz

Рет қаралды 51,370

3 жыл бұрын

🇺🇸🇬🇧Pablo Albornoz uses 2 Messerschmitt BF109 E in this video, where we learn how to do a "dirty" version and a "clean" version of paneling. Also, we round this video off with the following bonus: "How to make drained oil burnt with Model Wash". Enjoy it! 🇪🇸⬇️⬇️⬇️⬇️
--
🇪🇸Pablo Albornoz utiliza 2 Messerschmitt BF109 E en este video, donde enseña a hacer una versión "sucia" y otra "limpia" del panelado. Además, para redondear, añadió el siguiente bonus: "Como hacer el efecto de aceite quemado escurrido". Disfrutalo!

Пікірлер: 67

@natalebabbo-gunplaanddioramas 2 жыл бұрын

Extremely informative video with many useful tips. Excellent!

@timothybogans3905 2 жыл бұрын

Great demo and great products love the subtle effects that can be achieved they seem very forgiving thank you for sharing.

@vallejocolors 2 жыл бұрын

😊😊😊🙌🏻

@plasticflighthobbies6909 3 жыл бұрын

Gracias por compartir el conocimiento!

@spartanscalemodels8904 3 жыл бұрын

Muchas gracias amigos!!!!😃

@alessiogentili4437 3 жыл бұрын

Always great video and tips for use those very good product! Thank's Pablo, i'll use the second technic for my von Werra's 109.

@spartanscalemodels8904 3 жыл бұрын

Great!!!!! The Werra's 109 is really really wonderfull 😃

@gabrielfeitocontreras3403 3 жыл бұрын

Gracias Patricio, muy util el Video, ahora a aplicar lo enseñado, Saludos

@spartanscalemodels8904 3 жыл бұрын

Muchas gracias Gabriel!!!!😃

@curijosecuriel5674 3 жыл бұрын

Gran video Pablo, en tu línea, señor. Abrazos y seguiremos aprendiendo con vosotros. Cuidate.

@spartanscalemodels8904 3 жыл бұрын

Muchas gracias Curi!!!! Hacia mucha falta este video , en el se ve lo casi ilimitados que son a la hora de hacer este trabajo puntual y que le da mucha belleza a nuestros modelos 🤩

@curijosecuriel5674 3 жыл бұрын

@@spartanscalemodels8904 Si señor, así es.

@The_Modeling_Underdog 3 жыл бұрын

Excellent video as usual, mate. Very insightful and instructive. Cheers.

@spartanscalemodels8904 3 жыл бұрын

Thanks My friend 😍

@ichdu7310 3 жыл бұрын

thanks a lot for this great tutorial!

@vallejocolors 3 жыл бұрын

Your'e very welcome! :)

@danrussell3439 3 жыл бұрын

Very helpful video

@pabloalbornoz8214 3 жыл бұрын

thanks Dan!! :D

@stefanoscaccianoce2812 3 жыл бұрын

a video made very well and very useful, thanks

@spartanscalemodels8904 3 жыл бұрын

Thanks Stefano! 😃

@THROTTLEPOWER 3 жыл бұрын

Nice video thank you for sharing!

@spartanscalemodels8904 3 жыл бұрын

Thanks friends!!!😃

@SprueFascinationChannel 3 жыл бұрын

Nice job, Pablo.

@spartanscalemodels8904 3 жыл бұрын

Thanks friends!!!😃

@kennyb4871 2 жыл бұрын

Amazing effects Pablo. Muchas Gracias. Are you an artist by nature? That is, have you attended Art classes or are you an artist due to your love of painting models? I have 2 Revell 1/35 P51's. I have painted one, using the Vallejo Turorial for this exact plane using the different hue's of Metalic Aluminum paint. I plan on keeping it "Clean Panel" with what you have outlined here. I'm thinking I will experiment with the second using some of the weathering you have shown us here as well. Thanks my friend, Keep them coming!

@gercinosatiro Жыл бұрын

Excelente 👍

@vallejocolors Жыл бұрын

Muchas gracias. Gercino :)

@statoilbensin2190 2 жыл бұрын

Vallejo/Italeri model wash is the best for use in home as there is no toxic chemicals like paint thinner needed to make streaks or remove excess, simply use water or non toxic acrylic thinner to youre advantadge.

@luispalacio2988 3 жыл бұрын

Gracias por ponerlo en ESPAÑOL

@spartanscalemodels8904 3 жыл бұрын

Mil gracias Luis!!!!🤩

@longriflem14 Жыл бұрын

What was you Gloss Coat for the E4 Trop, I just used the Vallejo Desert Dust and it Ate my Gloss Coat and went down to the Paint.??

@georgem4713 3 жыл бұрын

I really like the fact that at 3:20 we can clearly see the rivets of the landing wheel at the middle part of the wing. The wash makes a difference. Will use it next time. Question : do we need to sqribe the plastic seams at 1/48 scale ? If so whats the correct depth for the wash to adhere correctly ?

@pabloalbornoz8214 3 жыл бұрын

Hi George!! ! the model was not repaneled in any sector other than to increase the depth of the mobile surfaces, the model (an eduard) has very fine paneling and rivets, if necessary, a single pass is more than enough, If you have very wide or curved panels, it is advisable to make one pass with the panel maker, at most two

@georgem4713 3 жыл бұрын

@@pabloalbornoz8214 Thank you Pablo. I had mixed results in the past with washes and have not tried them in resent years. Will try them from now on 😃. Nice video. Thanks for the upload.

@danielbrandao3166 3 жыл бұрын

Esse wash é acrílico, ou enamel? Excelente trabalho de envelhecimento, parabéns!

@vallejocolors 3 жыл бұрын

Hello Daniel, our paints are acrylics :)

@alessandropepoli4320 5 ай бұрын

I wanted to ask for advice, I did some tests using the Wash above the Vallejo Air directly, without transparent, the color I spread it to the airbrush a week before; Unfortunately, to remove the Wash with Airbrush Thinner, the color melted. I had to use water ...😒

@vallejocolors 5 ай бұрын

Helllo Alessandro! Thank you for your feedback. This is why Pablo used several layers of varnish before paneling and removing the excess of Model Wash. Try next time with varnishing to check that you get the same result :)

@zoltan-8233 2 жыл бұрын

Do you need to make clear coat on the paintjob to make wash or you can just add the wash on your paintjob? (Acrylic painting and washing on it)

@vallejocolors 2 жыл бұрын

Hello Zoltan! You can apply the washes straight into the model :)

@user-mj3cn2pv2h Жыл бұрын

Para remover exceso en el metodo 2 (2 capas de varnish+24hs) se puede usar thinner normal o tiene que ser el AB thinner? gracias, muy bueno el video

@vallejocolors Жыл бұрын

Hola Nib Systems, puedes usar AB Thinner :)

@JoseHernandez-yv3nt 2 жыл бұрын

Hola y disculpa pero te quiero hacer otra pregunta, para hacer manchas de aceite en un avión con los productos de Vallejo Engine stains, se debe aplicar sobre una superficie barnizada? Y una vez aplicado puedo se puede colocar barniz mate característico de los aviones?

@vallejocolors 2 жыл бұрын

Hola Jose, puedes aplicarlo en la superficie sin barnizar (a no ser que quieras por la razón que sea, proteger la pintura que ya tengas realizada). Pero no es necesario barnizar dos veces. Con aplicar el producto, dejarlo secar y seguir pintando hasta acabar y luego barnizar te funciona igual :)

@TirosDelSur Жыл бұрын

@@vallejocolors pregunta, cuanto tiempo de secado se le da al wash paea luego aplicar el barniz final? Gracias

@EricHonaker 3 жыл бұрын

Would these effects work using Game Wash? Or is it significantly different in formulation?

@spartanscalemodels8904 3 жыл бұрын

Hello! Game wash is different, is more stronger, You Need diluted with water, 60 /70 of wash with 40/30 of water to obtain similar results 👌

@EricHonaker 3 жыл бұрын

@@spartanscalemodels8904 Thanks!

@danielschmit9673 3 жыл бұрын

salut je suis souvent tés vidéo mais une traduction en sous-titre en Français serais super j ai du mal avec les produit vallejo panel et Wash a les appliquer ( surtout pour les diluer ) Mercie j adore les produit vallejo

@spartanscalemodels8904 3 жыл бұрын

Wey try to send to some seller page in France to translate and add. This was implemented in china and Rusia and works 👌🤗

@Jack-bs6zb 2 жыл бұрын

How to read the subtitles AND view the video simultaneously - a trick I’ve yet to accomplish.

@Guerrillakalle 3 жыл бұрын

What type of thinner is used

@spartanscalemodels8904 3 жыл бұрын

Hi! Is the airbrush thinner of Vallejo 👌, 🙂

@JoseHernandez-yv3nt 2 жыл бұрын

Y qué pasa si a todo el modelo se le aplica el wash, así lograríamos que las calcas tengan un aspecto avejentado?. No me gusta que las calcas queden limpias.

@vallejocolors 2 жыл бұрын

¡Hola Jose! En cuanto al weathering, el propio pintor es el que decide el nivel de suciedad, barro, grasa o polvo que más le gusta. Si no te gusta el aspecto de las calcas limpias no pasa nada, por supuesto que puedes envejecerlas y "ensuciarlas" con todo tipo de productos para weathering que tenemos. Todo debe ir a tu gusto, ¡como no! y en concordancia con el vehiculo/avion y el entorno y fecha historica a la que pertenezca. Puedes aplicar lavados, pigmentos, barros, salpicaduras, etc... 😊💪🏻👍🏻

@JoseHernandez-yv3nt 2 жыл бұрын

@@vallejocolors agradezco mucho tu respuesta y la valoro ya que estoy iniciando con este pasatiempos tan bonito

@vallejocolors 2 жыл бұрын

@@JoseHernandez-yv3nt mucho animo!! Y aqui nos tienes para cuando necesites consejo :)

@southpaw5483 2 жыл бұрын

What is the difference between "Model Color Wash" and "Game Color Wash" ?

@vallejocolors 2 жыл бұрын

Model Color range is focused on historical more standard colors and Game color range is focused on fantasy and more vibrant hues :)

@southpaw5483 2 жыл бұрын

@@vallejocolors Thank you; The "Game Color Wash" appears to be a different thickness and formula than the "Model Color Wash"; What is the difference? Model Color Wash appears to be more of a Panel Line wash? Your thoughts are welcomed.

@vallejocolors 2 жыл бұрын

@@southpaw5483 That thickness you're referring to may be caused by the vivid pigments used. For this range you can use better thinner than water :) Anyway, this chart may help you thin them in the future facebook.com/vallejocolors/photos/a.296855687010167/4144607128901651/

@vallejocolors 2 жыл бұрын

@@southpaw5483 Model Washes act like a filter, they only give the model a slight color but without covering the paint job underneath :)