AUTOart 🆚 Solido Nissan Skyline R34 GT-R Die-Casts Compared!

Рет қаралды 32,110

Жыл бұрын

James here to give you guys a sweet little versus video when it comes to a higher priced item versus a lower priced item of the SAME setup, or nearly the same, let's see what these two brands have to offer and which one would you go with? Let me know in the comments!
This video is NOT sponsored. Some product links are affiliate links which means if you buy something l receive a small commission.
🗒️ EPISODE NOTES 🗒️
✅ AUTOart Products:
🌐 www.modelcarshouston.com/coll...
✅ Solido Products:
🌐 www.modelcarshouston.com/coll...
💸 Start shopping TODAY for all your collector grade model car needs HERE ➡️ www.modelcarshouston.com
🚗If you're a collector that loves JDM vehicles, high quality products and amazing attention to details, this channel is for you! I love sharing this collector grade hobby with everyone and showcasing some of coolest and newest makes and models that are continually being produced. Buckle up because you are in for a RIDE!
⚡️Connect with Model Cars Houston:
www.modelcarshouston.com
/ modelcarshouston
/ modelcarshouston
✔️JOIN the EXCLUSIVE pre-order page here so you don't miss out on all the exciting new product releases: / modelcarshoustonexclus...
❓QUESTION - Have a question about the products or anything you saw in the video? Post it in comments section of this video!
✔️Subscribe to Model Cars Houston Here: / modelcarshouston
--------Cameras and Gear Used To Shoot This Video ------
🗒️Model Cars Houston Gear Checklist:
Video Shooting - Samsung Galaxy S9
Adobe Premiere Pro - Video Editing
Affinity Photo - Thumbnail
Stream yard - Video Recording
Lighting - amzn.to/3pARMSe
Microphone - amzn.to/3b8iwkG
Camera Tripod / Stand - amzn.to/3vD3gG3
Music and sound effects provided by Epidemic Sounds. Check them out here: www.epidemicsound.com
Music also provided by No Copyright Sounds. Check them out here: ncs.io/
#diecast #autoart #solido
About:
In this video, James compares two different brands of the same make, model and scale!
⚡️Check out these LINKS for the most POPULAR products:
✔️Model Cars Houston - High-Quality Diecast Cars
www.modelcarshouston.com?
✔️1/64 Figures for Diorama
www.modelcarshouston.com/coll...
✔️Diecast Cars New Arrivals
www.modelcarshouston.com/coll...
✔️Preorder Diecast Cars
www.modelcarshouston.com/coll...
✔️1/64 Diecast Cars
www.modelcarshouston.com/coll...

Пікірлер: 93

@aliey9330 Жыл бұрын

You cant beat solido detail at solido price range, the outside look of the car is just too incredible, almost like high end diecast model.

@modelcarshouston Жыл бұрын

Absolutely

@biohazard1542 2 ай бұрын

I disagree. Back in 2012, i bought my at Amazon for 74,99€. So compare to the original price, there is no point to buy the Solid Model.

@jasonn2284 6 ай бұрын

Autoart looks like a real car. The paint job alone makes it worth the price. Solido is not bad but just not the same.

@modelcarshouston 6 ай бұрын

💯

@arongecseg3523 3 ай бұрын

Yes, but i would buy it for that much money

@carloscintron6692 Жыл бұрын

very good explanation, but at least there is something for everyone, whoever has money buys the autoart and whoever does not have enough and is a collector can have at least one model at a low price 👍🏻

@modelcarshouston Жыл бұрын

Absolutely!!! I think both brands cater ALL hobbyists.

@aliey9330 Жыл бұрын

Solido know how to make more detail with less cost and price. He cut cost by making only two opening features , by doing that they can cut cost for making the detail for engine and trunks and focus on making as much detail as they can for the interior and outside look of the car.

@miltiadiskyvernitis 5 ай бұрын

I would typically buy Autoart, but ever since buying a Solido I've been regularly doing so, simply because they make very good quality pieces for the price paid, plus it gives me a chance to improve them myself.

@dr.jillalicecooper2587 5 ай бұрын

@@modelcarshoustonGood Lord, what a nerd you are man.

@Nyx2k Жыл бұрын

The V-Spec II GTR has the naca duct in the hood. The base GTR and the V-Spec both do not. The GT-T is not a GTR model. While the base Skyline is either a GT (non Turbo 2L to 2.5L inline six) or a GT-T (2.5L inline six with a single turbo), the GTR has a different chassis and a 2.6L Twin Turbo six cylinder. The GT and GT-T where offered in RWD with AWD optional as well as coupe and 4-door, the GTR was AWD coupe only.

@modelcarshouston Жыл бұрын

Perfect explanation! Thank you!

@artyfarty87 11 ай бұрын

I think it's wonderful that they have this option. If you want to still enjoy this hobby but don't have as much money, you can still enjoy it by purchasing the more affordable models. If you have the money you can splurge on the more expensive model. I think it's so cool that there is options for all enthusiasts.

@modelcarshouston 11 ай бұрын

Completely agree! And they're fully backed and licensed!

@RaceChase_ Жыл бұрын

Love the content! I just bought a skyline r34 1/18 from your website and im very exited to see how it looks in real life.

@spacegirlproduction9506 10 ай бұрын

Im more than happy that there are many options. Al collector of few things (lego, figures and die cast) I’m happy that at least here we can get very good model for cheap price

@modelcarshouston 10 ай бұрын

Absolutely

@leonardoramos5306 Жыл бұрын

Nice video! A comparison between this composite one and the older full diecast body release R34 from autoart would be pretty good if possible!

@stepuptothemike9603 Жыл бұрын

I like that there is an offering for a model that is priced lower, but with less details / features. Solida's details appear good, and if you don't mind a model where you cannot see under the hood., hence a less interactive model, but all the good looks of the car., but truly you get what you pay for with Autoart, who offers some of the finest details I have ever seen on a model car. I was blown away when I saw one in person. Some models i would not mind not being able to open the hood or the trunk. Glad to have Solida around!

@edromeandbrossportsandcoll5706 Жыл бұрын

Both are great models for their prices, if you want good quality for a cheaper price go for the Solido but if you like a little more expensive and detailed model go for the AutoArt those details, grills and of course the tires are amazing

@minthouse6338 28 күн бұрын

I used to be able to buy AUTOart for $60 and got two R34s before they skyrocketed the price. Regular street in midnight purple and a S-Tune. Midnight purple came in a plastic cradle box and the S-Tune in a foam box.

@Skorpius2 Ай бұрын

Nice vid! I've been an autoart collector for almost 15 yrs and I do like the older models since they were mostly comprised of diecast. I do like the great detail on the autoart, its the price that always keeps me away from alot of models. I recently got the Nismo R34 GT-R Z-tune in Midnight Purple III and its very cool!

@modelcarshouston Ай бұрын

Absolutely

@minthouse6338 28 күн бұрын

There was a time when you could call AUTOart as a good quality diecast at a reasonable price. I think they came from UT Models? Still got a few of those especially the cop cars. Most of the AUTOart race cars were sealed except Porsche. It was rumored the CEO was a Porsche fan and demanded they don't make them sealed. I was lucky to get a lot of Dealer Editions while AUTOart still had a contract with the car manufacturers and before they skyrocketed the price. Funny thing is, one of the DE cars was a BMW and only later did I see it was actually a Kyosho lol.

@AllanMiniatureWorld Жыл бұрын

Wow! I have the Autoart model in Midnight Purple.

@modelcarshouston Жыл бұрын

Gorgeous piece of art. The Z-Tune version is scheduled the end of the year.

@xbox360dm 9 ай бұрын

I’ve just recently purchased the solido ford sierra cosworth and the bmw m3 models and I am just waiting for the Alfboth beautiful models indeed.

@marcakins3373 2 ай бұрын

I am super new to the hobby, I am Jada Toys entry to the hobby…I got hooked with the A-Team van then moved into other popular movie and tv show vehicles

@modelcarshouston 2 ай бұрын

Welcome, great place to learn.

@MGTZR037 11 ай бұрын

orange front turns = 1999 model year. the hood duct indicates it is a vspec 2 (2001-2002)

@jaredt1356 Ай бұрын

I think I will buy a solid model.soon, a millennium jade R34. But for me when I get it I would look at the details then detail it myself; flock the carpets and rear seats, paint the windows and outline the headlights, possibly new taillights. just to make it my own and make it look that much cooler

@dma98 4 ай бұрын

I'm super new to this hobby, I really want to get a quality model made from metal that doors, hood, etc opens. Is there a manufacturer that produces such?

@olandscape Жыл бұрын

The only complains for solido from me are: -No seatbelts -frequently inaccurate proportions (supra, etc) -iffy qc (from personal exp) However, I guess they are expected for the price. The only "good" budget r34 was the motormax one, but it was long ago. Not to mention it's a motorex lhd one.

@YTFaultier Жыл бұрын

Great video / as always - the devil is in the details and this is the aspect here you pay for AUTOart 😃

@modelcarshouston Жыл бұрын

Indeed it is!

@JDMSL Жыл бұрын

I’ve got a 1:24 scale Maisto R34 GTR and I’m really sucked up with it ... The Maisto is actually out of the aerodynamics and other features too . However in my country the price of them are very high . I bought the Maisto R34 for 8K rupees whereas a Solido R34 costs about 17,000 rupees and Autoart is available for 35,000Rupres 😢

@blackcollector3177 Жыл бұрын

You get what you pay for I have just about all the manufacturers except BBR out of my price range

@do.xuantung Жыл бұрын

Amazing job by Solido, it looks so good that from a glance it looks like an Autoart

@declandurrant 8 ай бұрын

Well i am going to buy the solido over the autoart model purely due to the price differences. However i am not completely satisfied with the interior detail of the solido so i will mod/customize it. I will add carpets and material to creat a more premium feel.

@covasqui13 8 ай бұрын

What is the best detailed brand of 1:43 miniatures?

@modelcarshouston 8 ай бұрын

In my opinion, I would say Make Up Co., Ltd.

@Understeerking Жыл бұрын

Good video

@Andreasy2 10 ай бұрын

Quality over quantity. That said, the solido is pretty good, details and proportions of the model seem fine for its price point. The only thing which is killing me are the horrendous headlights, they are killing me.

@modelcarshouston 10 ай бұрын

Absolutely

@sozeric 4 ай бұрын

solido is a good deal with that price, but if you have money ,prefer Autoart

@modelcarshouston 4 ай бұрын

Absolutely!

@TheRealKillerTomato 6 ай бұрын

I’ve never seen anything as good as AutoArt. I do understand that if you can triple your collection for the same price, that might be the way to go.

@modelcarshouston 6 ай бұрын

Quality over Quantity has been my motto.

@TheRealKillerTomato 6 ай бұрын

I agree. Which is why I tried to log on to Model Cars Houston yesterday but EVERYTHING IS SOLD OUT. Great selection though. Best in the business.

@minthouse6338 28 күн бұрын

Never seen anything as good as AA? You might want to check out CMC, BBR and maybe Exoto. Kyosho was pretty good and Minichamps some times.

@TheRealKillerTomato 28 күн бұрын

I have no experience with those brands. I wouldn’t say I’ve seen any Minichamps that are as nice as AA though. I have some Minichamps in 1:43 but I only have AA in 1:18.

@sammysmith719 9 ай бұрын

I have an older metal auto art gran turismo gt-r r34…..where can I find how mutch it’s worth?

@modelcarshouston 9 ай бұрын

eBay would be a good starting point or as the AUTOart community on Facebook.

@teebodk3917 10 ай бұрын

Very few people will be able to afford big collections in the AUTOart price range, but likewise, very few people will not be able to afford a single model in the AUTOart price range, and that, I think, is the key: every collector will have a few extreme favorites (cars you may have owned yourself or dream of buying one day), but will also like cars in general, or maybe just certain types of cars. So the logical way to build a collection is to go Solido price-range for non-special cars, and then spend the extra on the few special ones. So both the Solido and the AUTOart are fully justified and serve a purpose. As long as the quality is "decent" (which it certainly is on the Solido, although the orange-peel paintwork finish is a problem), it'll fit well into any collection.

@minthouse6338 28 күн бұрын

In the golden age of diecast cars you could. I was buying AUTOart cars for $60 and less. That time is long gone.

@BubbaSmurft Жыл бұрын

NACA duct, not vent. Missed the BIGGEST point... which paint is closer to factory?

@modelcarshouston Жыл бұрын

Thanks for that. Definitely the AUTOart for paint.

@thecsr2944 9 ай бұрын

Definitely, as a collector that I am, it will take me a lifetime to understand how there are people who stop collecting Autoart just because they are made of composite. It is stupid to complain that they are light or fragile, because first of all a scale model must always be treated with care, they are not Tonkas or Hoy Wheels so they cannot be handled carefully. Secondly, composite is the solution to the usual problem with metal, paintrash. I don't need my model to weigh like a block of cement to have more "value", for a serious collector detail at its highest level should be important. People need to know better the benefits of composite and resin over the metal.

@modelcarshouston 9 ай бұрын

Agreed. It's because they been spoon fed diecast for so long.

@minthouse6338 28 күн бұрын

Not to mention most of the really high end model cars with a retail of a few thousand bucks are all made out of resin.

@knowledgeworld463 Жыл бұрын

I am a collector of 1 32 scale is i am on right path or should i change my scale to bigger one need your heart touching suggestion pls so faar i have collected almost 300 model in 1 32 scale

@modelcarshouston Жыл бұрын

I would not change what you're a fan of collecting.

@fingerprints2983 Жыл бұрын

No, you are not on the right path. Sell everything and get into 1:18 or 1:43.

@knowledgeworld463 Жыл бұрын

@@fingerprints2983 explain more

@fingerprints2983 Жыл бұрын

@@knowledgeworld463 because you are probably only one that collects this scale. 1/24 and 1/32 and few other odd scales that are not - - - - 1/8 - 1/12 - 1/18 - 1/43 or 1/64 - - - aren't collector scales. It is toys, that will never be anything of value. Why Autoart, Exoto, CMC, GT Spirit, TSM, Ignition, Minichamps, FrontiArt, Hot Wheels, Norev, Spark, LCD, Almost Real and many other aren't producing anything in 1/32. Because it not a collectors scale. There is zero interest in this scale, it is a garbage scale.

@knowledgeworld463 Жыл бұрын

@@fingerprints2983 if today auto art announces 1 32 scale on there website u will be first collecting

@chiautorepair Жыл бұрын

I stopped buying Autoart when they went to composite, even though I did compare my diecast AE86 to the composite AE86. I did see that the lines are cleaner and more flush with the composite model. But paying such a premium and the car does not even feel like a paper weight. I just have a hard time spending the premium price on it.

@pdcichosz 11 ай бұрын

Resin is also light on its own, but Ottos for example have such ridiculous weight added that they are heavier than most diecast models 😂 I understand the appeal, but it's completely superficial. That being said, I had a composite Aventador which obviously benefitted from going composite shape wise and... I've returned it and got the diecast one instead. Apart from flaws and shortcomings of that specific example I hated interacting with it, especially trying to close the engine lid. I did get a Diablo and Huracan though and they look amazing. I wish they stayed with diecast, but at least there are some benefits of switching to plastic. Agree on the price though, I had a really hard time justifying the purchases I made. The likes of Motorhelix, AR or LCD show that you can make a very good body shape using metal. Aa should just be cheaper.

@philbalcar Жыл бұрын

Solido seems basic under, more of a generic bottem. The Auto Art has front drive shaft, so its for a AWD car.

@fabio1826 Жыл бұрын

I had the Solido R34, it looked good in pictured and from far, but it's such a dissapointment in your hands. The model feels so flimsy, cheap and light. Mine didn't even close its doors properly. It looks decent but it doesn't have a lot of details. One big downside is the lack of opening hood and trunk. I don't think you get what you pay for, yes it is cheap, but I feel even cheaper brands like Bburago and Maisto offer better quality cars. That being said, Solido's strong point seems to be race cars, those do offer a lot of interior and exterior details, with the rollcage, wires and buttons you get on race car interiors, you can forgive not being able to see the engine and mechanics. My final veredict on Solido 1/18 models: subpar road cars, awesome race cars. Oh, by the way, Solido made the 1999 regular R34 GT-R, compared to the 2001 V-Spec II from Autoart, that's why there's some differences, like the air duct in the hood and the color of the turn signals.

@ihave3subs770 Жыл бұрын

Autoart costs more than a down payment on a house lol

@modelcarshouston Жыл бұрын

With the way house prices are now I'd disagree lol

@riskysway2542 11 ай бұрын

I would buy a solido supra but at the same time i am saving up for a pc

@rookietoprobuildz 11 ай бұрын

Glad I went with the AUTOart with my first ever scale model car. 9:52 The extra detail makes the increase in price worth it in my opinion!

@lwinsittlinn544 10 ай бұрын

yeah, me too

@jamesdixon2857 Жыл бұрын

I'd invest in autoart

@modelcarshouston Жыл бұрын

Can't go wrong there!

@watchman1872 6 ай бұрын

With everything, paying extra for higher quality and functionality is a matter of diminishing returns. Twice the quality costs more more than twice as much, to the point that at the top, slightly better quality comes with a huge price increase. So everyone has to arbitrarily draw the line based on their expectations and budget. We're lucky that there's a global demand large enough to support products made at so many price points. That's the beauty of capitalism. As to diecast vs. resin, I buy models based on their quality and accuracy, so weight isn't important to me. As far as accuracy, the weight of a resin model is far more realistic than diecast. After all, a life-sized diecast R34 would probably weigh a totally unrealistic ten tons. So, I would have no problem displaying a 1:18 Auto Art R34 right next to my Tamiya 1:18 Gordon Murray T.50 when I finish it.