Modeling a Thrust Vectored Rocket In Simulink

Рет қаралды 253,472

Күн бұрын

Thanks to Mathworks for sponsoring this video! The Aerospace Blockset model, and Simscape model, can be found for free here: github.com/mathworks/Modeling...
For MATLAB and Simulink videos, subscribe to the MATLAB KZfaq channel: / matlab
Learn how to get MATLAB and Simulink: www.mathworks.com/products/ge...
Help support BPS.space: / bps_space
Second channel, mostly for KSP: / musicmakr
For more info:
/ joebarnard
/ bps_space
/ bps.space
/ bps.space
www.bps.space

Пікірлер: 650

@P0tux 3 жыл бұрын

As an aerospace student myself I would love to see what you're closed loop system would look like. Also as a side note: You touched on so many important topics and processes that we encounter day to day so awesome work! (just calculating inertia values with oscillation was fantastic tbh)

@nocare 3 жыл бұрын

I would love to know a way to do the calculation without being able to physically manipulate the craft. Things like finding CM via multiple simultaneous scales rather than balancing. IDK how to extend such techniques to inertia measurements. Some vehicles are too large and cumbersome to do this kind of test easily.

@Haellsigh 3 жыл бұрын

@@nocare At that point wouldn't you rather use a 3D model to estimate the values?

@nocare 3 жыл бұрын

@@Haellsigh The problem is for hobbyist grade projects there is generally only one person working on it. So a large projects like my 11ft wingspan flying wing can become challenging to model in enough detail and accuracy. You need to add every part in the correct place at the correct weight to the model for that to work. Glue joints also tend to add weight that isnt modeled reducing accuracy. Yes a 3d model can allow you to do the calculations on a model too large to manipulate easily but you usually need a team of people to get it done right and in a timely manner.

@irakliabzianidze7180 3 жыл бұрын

Doesnt the oscillation time depend on how hard you push the rocket? How do you know if you have the right values?

@killorkubed 3 жыл бұрын

@@irakliabzianidze7180 oscillation time (period) does not depend on how hard you pushed a rocket (or its amplitude) actually, the same principle as a pendulum.. a pendulum of a certain length with always have the same period, Period T = 2pisqrt(L/g) where L= length and g=gravity, mass of the bob or amplitude are not related, physics is awesome! Engineering student here

@MrHichammohsen1 3 жыл бұрын

WELL OF COURSE WE WANT MORE STUFF LIKE THIS!

@Jxmiecole 3 жыл бұрын

I agree!!!!!!

@RustyMTB 3 жыл бұрын

for a second I though that this was NASA... wow

@ryanrising2237 3 жыл бұрын

“We won’t get into PID controllers or some of the more fancy thrust vector control stuff...” aww man “...today.” WOO!! Excited to see more of how you deal with these, even though you’ve probably gone over this stuff in other places before.

@picoplanetdev 3 жыл бұрын

I totally love this video and really hope that Joe makes one on simulating the PID system!

@ms-fk6eb 3 жыл бұрын

hell yeah!

@bsodmike 3 жыл бұрын

@@picoplanetdev Definitely

@pinochet3317 3 жыл бұрын

(Listens to Joe Barnard talk Rockets) Me: “I like your funny words, magic man”

@cecil5 3 жыл бұрын

Hello fellow tik Tok addict

@pinochet3317 3 жыл бұрын

@@cecil5 waddup

@fredriko 3 жыл бұрын

I love you so very much Pinochet

@ChucksSEADnDEAD 3 жыл бұрын

Nothing in this world is free except for helicopter rides.

@MSI2k 3 жыл бұрын

It's just basic high school Trig, dude

@joeymurphy2464 3 жыл бұрын

2:10 Quick tip for finding center of mass of a long body (rather than guess and check): Stick your two fingers out in front of you like you're doing finger guns. Lay the long body across your two fingers. If you pull your two fingers slowly together, the rocket will automagically end up balancing on your fingers, which are now at the center of mass. Definitely try it out; don't take my word for it as hearsay :).

@Mariano.Bernacki 3 жыл бұрын

Just tried it with a 20 cm ruler, fingers came together at 102 mm, and the first half has a little hole so the center of mas should be skewed slightly above the 100 mm mark. Amazing.

@kevin42 3 жыл бұрын

Was about to say. Friction rules!

@realvideosrv1879 3 жыл бұрын

Prettt cool if you have the object perfectly straight, and the friction coëfficiënt between your fingers and the material is exactly the same at all times.

@edisonyang3283 3 жыл бұрын

Ok what the hell why does this work

@tgschaef 3 жыл бұрын

Dangit! I was about to relay that Don Herbert/Mr. Wizard tip and thought, "well, let's scan the comments first."

@ErikBongers 3 жыл бұрын

Yeah, PID feedback would be nice. And how you tweak the P, I and D factors.

@priyanshusrivastava9288 3 жыл бұрын

Observation and math!

@Silverlightnick 3 жыл бұрын

Basically it’s a matter of math, at first you do the math model in the continue domain, then you translate it into digital with some equations that give you the PID values

@Kokiloki1000 3 жыл бұрын

@@michaelkruger2736 IMO Ziegler-Nichols is not suitable for such applications .

@locutusvonborg2k3 3 жыл бұрын

actually matlab is capable to tweak pid itself, like other programms can do

@youjustdo 3 жыл бұрын

pid 튜너라고 있으니까 그거 써. 아니면 컨트롤 툴박스에 리니어 어널리시스라고 있는데 거기서 선형 모델링 뽑아주거든 그거 써.

@danieltakawi9919 3 жыл бұрын

This guy is one of those teachers/professors that made complex concepts easy to understand and made you confidently understand things you never imagined you would be able to. Great Work! Earned a Sub and can't wait for more !!

@bahashwaiki 3 жыл бұрын

As a mechanical engineering student, what you covered here is very informative and helpful. More of these videos is definitely a good idea!

@malgailany 3 жыл бұрын

I'm impressed. The way you measured the inertia, Simulink implementation, and the very cool Simscape simulation! Thanks.

@alphaomegarocketry4390 3 жыл бұрын

This EXACTLY what I needed! I’m in the middle of my own simulations and this will help a lot!!!

@udaymandhata 3 жыл бұрын

As a subscriber and a fan of this channel, and as a Simulink language developer, it gives me immense satisfaction to see the tool we develop gain more traction in the non-commercial rocket community. Thank you Joe!

@tobiasnielsen578 3 жыл бұрын

I am absolutely ready. We did a bunch of this when i was in the university, but never really got to play with it after I graduated - but i do remember it as fun math! So ready for that brush up!

@916senna 3 жыл бұрын

I for one would really like you to expand on this with more video's. You present stuff I havent done for 30 years in a very clear manner and its fascinating. Big thumbs UP

@cai_49 3 жыл бұрын

I tell you man, your channel is so unique, you're doing something really cool and special, teaching model rocketry in a way that everyone can understand

@tj16417 3 жыл бұрын

This is so cool Joe! I just learned to use simulink in my college and seen this type of content makes me so happy, 'cause I understand better some of the rocket science you do! Nice video by the way!

@sethmlazgar9171 3 жыл бұрын

YES a closed loop controller video would be awesome! I just finished my first System Dynamics and Controls class for my undergrad and I can't get enough of it!

@milindsharma8106 3 жыл бұрын

Hi Joe!!! Pleaseeee do another video like this one! learned so much from just ten minutes, and I'd love to learn even more!

@_Eamon 3 жыл бұрын

WOW. I've been researching moment of inertia determination for my senior design project. This could not be more timely!

@andreasklintberg104 3 жыл бұрын

Extremely interesting and awesome format, short but got so much from it in terms of both practical stuff and theoretical understanding. I would love more of these looking into more advanced concepts.

@Markharlan95 3 жыл бұрын

Yes - 100% would love to see this become a series!! Thanks Joe.

@Spinomine 3 жыл бұрын

That was fascinating! As an engineering student I'd really love to see another one of those videos

@samblake9953 Жыл бұрын

The way you casually highlighted elements of dynamics better than most of my professors in a video mostly about modeling is awesome

@sourabhk2373 3 жыл бұрын

I work at Mathworks and I am a huge fan of your work! Glad to see Mathworks sponsoring KZfaqr's ! Godspeed.

@asuthoshcr9581 3 жыл бұрын

I liked the concept you explained. that was short and sweet. Me being an Aerospace student I love the way you explained each term. I will give a shot to your Simulink model.

@blazepascal1878 3 жыл бұрын

Dude we need more of this! Make this into a series! I would love to see more about how to make the simscape model with the stl file visualization, plus closed loop and PID simulation.

@TheNinjaDwarfBiker 3 жыл бұрын

BPS : *Makes Sponsored Video* Everyone : We want more

@SchneiderTony 3 жыл бұрын

Probably a stupid question, but your nose cones are 3D printed as well? Yes? Love your content!

@SchneiderTony 3 жыл бұрын

Lol you have a plant.... good for u.

@hu5116 2 жыл бұрын

Loved your simulink / simscape video! Very few of the aeroblockset blocks have any examples which really inhibits the ability of a new user to figure out which is which and which one to use. I think MathWorks should hire you to make rocket examples for all the blocks! I would very much like to see more videos like this going into more blocks and more use cases and since you are such a good teacher, even just straight out simulink and simscape tutorials. THANKS!

@martijnschuman 3 жыл бұрын

That RGB PBS logo in the background is nicely played. Exactly between the walls

@stickz9871 3 жыл бұрын

RgB Is GAe

@Oli420X 3 жыл бұрын

@@stickz9871 funny

@thePronto 3 жыл бұрын

BPS or Public Broadcasting System? Red Green Blue or Ruth Bader Ginsburg?

@BPSspace 3 жыл бұрын

I move everything around to get it just right, glad you like it :)

@martijnschuman 3 жыл бұрын

@@BPSspace haha, I live everything you do. I'm really getting into space and model rockets lately, I unfortunately haven't had the opportunity to buy/fly any model rockets but it's definitely on my bucket List

@TreyRuiz 3 жыл бұрын

Thank you Mathworks, and BPS.space! This is the heart of controlling your project.

@k2_robotics 3 жыл бұрын

Thanks Joe for such an awesome vídeo. 854 seconds of learning. I´m trying to build a model rocket (to honor some spanish rockets, the old España 1 and Miura 5 from PLDspace) with a TVC. The desing, the building, the 3D printing, the electronics and the programing is almost done, but I have no idea of simulation, so I need to learn every single concept in the way to find the right Kp, Ki and Kd constants. So I'll be so pleased to do that way with you. Thanks Joe.

@patrickknight8907 3 жыл бұрын

The measurement of the mass moment of inertia was great. Would be awesome to see the PID and more detailed TVC stuff in the future

@Shutupalready47 3 жыл бұрын

The Simulink coding standard would like to have a word with those kinked lines... I kid. For real though, congrats for landing a Mathworks sponsorship! That’s awesome! If you keep doing this as a series you should look into scripting Monte Carlo runs for data-driven design optimization. I think the community would really get a kick out of that.

@Lorenzo_apd 3 жыл бұрын

I am really interested into seeing how your closed loop control system looks like. I thank you for all the great work you have shared with the community because many of your videos helped me and I think many other people understand better some kinematics problems and mechanical engineering designs choices.👍

@beesod6412 3 жыл бұрын

love the old tape from previous use! great video Joe! You make building rockets, fun!

@chandanmchatrapathi174 Жыл бұрын

Joe you inspire me lot and you know what I am an aeroplane engineer I learnt more from you than my degree years kudos dude.

@ashutoshdhaka9630 3 жыл бұрын

Great video man !!!! Very informative for students getting into this field, really shows how self-learning can help you break down complex problems.

@MesserMorfeo 3 жыл бұрын

This is a fantastic explanation. I can't believe you made me comprehend (at least to some extent) rocket science.

@codyporter4680 3 жыл бұрын

This was an awesome video, I would be thrilled to see some more about this. I have recently started an attempt to gimbal a model rocket.

@cartermckenzie2623 3 жыл бұрын

I would love to see some closed loop systems! Great job explaining everything like always Joe. I am studying stuff this right now in control systems class and you make it sound easy.

@Brixxter 3 жыл бұрын

I absolutely love these kinds of videos, even though many people are probably here for fancy rockets and spectacular failures (I can't blame them! :D) this is probably my favorite video format. Easy to follow along, very detailed and informative without being hard to grasp. I could watch these on loop for days.

@al1us 3 жыл бұрын

Yes please, MathWorks please sponsor this guy! He does an amazing job

@Bananarammaa 3 жыл бұрын

Yes please keep posting these!! I’d love to learn more about creating my own simulation and control software

@Tupiniviking_de_osasco 4 ай бұрын

I have just bumped into this amazing channel. I would love to see more Simulink videos ❤

@gedaliakoehler6992 3 жыл бұрын

Cool stuff. Like to see it! I'm used to doing matlab for class. It's crazy that you got sponsored by them, lol. good stuff.

@TheRealJavahead 3 жыл бұрын

Thanks Joe, please keep the Mathworks content coming.

@EXOgreenMC 3 жыл бұрын

I use a program called Rhino for 3D modeling, and it has some visual programming elements like this to create tweakable designs. I find that visual programming in this sense helps me teach other classmates bout how to make something because it forces you to think through an order of operations and because it lays out alot of the options you can use instead of having to googe what formulas you might need. Very cool and I hope to see more like this!

@Phughy 3 жыл бұрын

Yes! I want the closed loop explanation! Impressive work. Makes me want to go back to control system design

@kreelaban3420 3 жыл бұрын

What an inspiration ! I understand very little of it but I enjoy watching a real engineer ! Thanks

@markmcculfor6113 11 ай бұрын

I love seeing the dynamics I learned in college last semester! Mechanical engineering is awesome

@tim3609 3 жыл бұрын

Thanks a lot for this brief introduction. While I so far have only used transfer functions in Mechatronics I, it´s great to see how the more advanced blocks can be used. Looking forward to Mechatronics II. I would be very interested in a video covering Simscape and other simulation tools you might use.

@abdullahcerkezoglu9450 3 жыл бұрын

This is actually gold mine. Thanks. Looking forward for the next video.

@LuccasLab 3 жыл бұрын

I would love to see more Simulink videos like these. Awesome work, Joey!

@wickedwalrus Ай бұрын

As an Australian, it brings me great joy to watch you do all of this in Metric

@uNitZZe 3 жыл бұрын

I loved this video! Amazing content please continue collaborating with MathWorks.

@maximeg3659 3 жыл бұрын

calculating inertia via oscillation was unexpected and smart ! nice video !

@gigatentaction2356 3 жыл бұрын

Please do more video like this, this is so useful and easy to understand

@danielle2328 3 жыл бұрын

Nice video! It would be great to see the next video of the closed-loop control of the rocket and maybe comparing whether or not there is a significant difference in the method of doing the PID control.

@juancarlosabad3298 2 жыл бұрын

Excellent example of control system identification , thank you!

@KcK702 3 жыл бұрын

These videos are great! I’m looking forward to the more detailed ones.

@Ameliaross106 3 жыл бұрын

I can not tell you how useful this is thank you so much.

@JacksonsPOV 3 жыл бұрын

As a Computer and Aerospace Engineer, I would love to see more videos like these!

@MrRemi1802 3 жыл бұрын

Thank you for offering us this delightful piece of engineering.

@essayashaile359 3 жыл бұрын

I like your simplicity, genius explanation.

@leilahabylhan Жыл бұрын

great job. very easy and visible to understand. I'm grateful

@RobofGabriola 3 жыл бұрын

That was a truly fantastic tutorial! I wish my professors in Aero Eng had half as much imagination.

@MmoviesE 3 жыл бұрын

Just finished my Simulink modeling assignment for my dynamic controls class last week. I actually understand what hes doing. Holy crap I am LEARNING.

@Quantum_Dots 3 жыл бұрын

Yes pid simulation is needed , I loved actually that last part where you did simulation with a small rocket

@mumblbeebee6546 3 жыл бұрын

Thank you, that was a great primer to take the fear of modelling! I used Matlab a long time ago in Uni and not touched it since. For a second-order hobby it's outof budget. But your presentation has been inspiring, and I may dabble a bit again! I would absolutely love a follow-up on closing the loop - got on mathworks, this guy is selling you well! ;-)

@mikeru22 3 жыл бұрын

Check out the home license if you’re interested!

@pladselsker8340 3 жыл бұрын

Hey Joe, this is not a usual tutorial to me, this is fucking helpfull. I would greatly apreciate a followup video with feedback loops, pid controlers and whatever you think is relevant. You're saving me a lot of time and frustration with this, I love you.

@user-yv1sp1ey1e 3 жыл бұрын

I had a really cool teacher in my Modeling course on bachelor degree, and we studied the subject in a playful way. And one of these tasks was to develop the Falcon 9 landing system, but we also had to manage the landing legs separately. The final result was calculated as the sum of time, landing speed, and accuracy. All this is seasoned with beautiful visualization. It was 2018...

@SergioIO79 3 жыл бұрын

Excellent video. Hope to see more like this one. Great work!

@SKYWURX 3 жыл бұрын

This... this is what I've been waiting for! Thank you :)

@Irish2050 3 жыл бұрын

I literally can't comprehend this guys genius.

@willtheelectrician8184 3 жыл бұрын

Lol, same

@MichaelLloyd 3 жыл бұрын

You need to get a degree in music...

@confusednsutian7100 3 жыл бұрын

It's not that difficult

@t_c5266 3 жыл бұрын

Thats what separates the engineers from the rest. He's not doing really much but following a control scheme found in numerous textbooks

@ribaaz 3 жыл бұрын

@@t_c5266 i love to Watch videos like this and seeing something that i studied in engineering classes!

@Beltonius 3 жыл бұрын

The world needs more Matlab based YT videos

@chockman3833 3 жыл бұрын

This is great, I would love more MATLAB/simulation content!

@AlexKite68 3 жыл бұрын

Perfect! Thanks! Awaiting PID simulation!

@Eluflowfreee21 3 жыл бұрын

Please show more I have problem with adding and subtracting but I understood this a lot. Please continue

@pramitchaudhury1821 3 жыл бұрын

Please make a complete series feels so go to see the practical usage of high school physics

@manastiwari693 3 жыл бұрын

Highly inspiring!! Keep on the good work and yup i would very well like to see the PID video too!

@chaimlukasmaier335 3 жыл бұрын

Love this Also congrats on the mathworks sponsorship!

@clouvyx1657 3 жыл бұрын

I fired my first model rocket thanks to you for all the inspiration thank you

@abdelrhmanmohsen3154 3 жыл бұрын

Im very curious to see your closed loop control and again good job man you are genius

@gabrieleguazzotti 3 жыл бұрын

Very good work man!!! You kill it!

@FLABrowncoat 3 жыл бұрын

Dude, you have a talent for educating. I would pay good money if you did one of those online "Masterclass" courses.

@victorboesen3837 3 жыл бұрын

It's good to see Boe Jarnard having a good time on the table:))

@R_Alexander029 3 жыл бұрын

Reminds me of my engineering days at uni. Awesome stuff.

@vedantbarje134 3 жыл бұрын

That was some great info👍. Would love to know more about the rocket mechanics animation and of course PID control!

@JakeDownsWuzHere 3 жыл бұрын

would love to see more man, this stuff is fascinating!

@theredlabcoat 3 жыл бұрын

It is so sick to see Mathworks sponsoring videos

@Kimballgoss 3 жыл бұрын

Awesome video! I for one would love to see you go through the process of creating a simple rocket PID controller in this software. Count me in for that video!