Excellent video; I am a woodworker and have watched many of your videos and they are always so clear. Once again, right on target!
@gfeldmanhill7 жыл бұрын
Thanks for this "woodworking" series. I've been messing with SketchUp and watching other videos for just a little while, but I've learned more from your sessions than any other. I actually feel like now I finally understand how all the parts work together and I'm getting the hang of it. Thanks!!
@allentegarden96867 жыл бұрын
I agree with Greg. I've been using Sketchup for a while and didn't completely understand how group and components worked until this series of videos. Thank you
@Thesketchupessentials7 жыл бұрын
Awesome! Groups and components make such a huge difference when modeling, which I why I keep talking about them so much - glad you found it helpful!
@Thesketchupessentials7 жыл бұрын
Thanks Greg! It's always nice to hear that people are finding my tutorials useful!
@estebanvan48643 жыл бұрын
sorry to be so off topic but does anybody know of a way to get back into an instagram account..? I was dumb lost my login password. I love any help you can give me.
@teosinghsyiem94263 жыл бұрын
SketchUp through your clear presentations has given me the chance to explore new opportunities in the woodworking world. Enjoying every bit of your instruction.
@jamesopell7 жыл бұрын
Thank you Justin for another excellent segment useful for woodworkers. As Alessio said, "I learn something new" with each video.
@Thesketchupessentials7 жыл бұрын
Awesome Jim - that's what I'm going for! :)
@coolmaster1215 жыл бұрын
This is THE place to learn SketchUP. Im surprised you dont work for Trimble and make their tutorials.
@DarkMoonDroid3 жыл бұрын
They couldn't pay him enuf. Esp. since they would have to pay him to _not_ do the stuff he _wants_ to do. Plus, Aaron already has that job, and he's good at it.
@finomfood16206 жыл бұрын
Great video Justin, I'm new to Sketchup and find your videos are helpful. Following this video I came across a challenge that took awhile to figure out... When you showed both options for creating the set place for the leg (offset and tape measure) I found it very difficult to triple click and only select the leg if you used the offset tool - it kept selecting everything and didn't know why?? I tried changing my mouse options, looking on forums, etc.. No real answer. So, what I learned was to use the tape measure to offset - triple clicked worked without selecting other items!! Other way (offset tool) doesn't allow you to just select the leg...🧐😉
@Thesketchupessentials6 жыл бұрын
Triple clicking selects all connected geometry, so if your leg is touching other raw geometry, it will select all of that connected geometry. Unless I'm missing something, it sounds like it was doing what it was supposed to do...
@buckeye19486 жыл бұрын
Another great video Justin. One suggestion when coping components you are going to modify (such as a table leg or skirt) I have found the best way for me to orientate the copy to the proper perspective (mirror image of it) is to use the Flip Along feature. You touched on it briefly in this video. This feature also comes in handy when modeling bookcases, and cabinets if you going to use dadoes and rabbits in your build. Again thanks for all the work you put into making these videos I have picked up a lot of tricks and quick steps to make modeling faster.
@Thesketchupessentials6 жыл бұрын
Yeah, I know it's there, but for some reason, I really prefer using the scale tool. Probably because it gives me a visual of exactly where things are going (I always flip along the wrong axis :p ) Thanks!
@davidwiseley6333 жыл бұрын
Well done, if a little fast. I have trouble applying unique. When i select and right click (context clicking) often unique is grayed out. Perhaps a video showing the common mistakes newbies make, and how to recover might be useful. Using shortcut keys has helped me from getting lost in menu options, especially when they are 2 or 3 levels deep. Thanks for great lessons that have helped me learn furniture design for my shop. Keep up the great lessons. Thanks
@ChinhNguyen-yb3cp Жыл бұрын
Great video ❤ Thank you so much for this.
@user-ue5kr7xf7z7 ай бұрын
super helpful - I build legs a lot - thanks.
@sttraveler25933 жыл бұрын
Thanks , always informative. I hope your dog got to feeling better,,,
@tritoandl3 жыл бұрын
Thank you so much . I've just watched whole your video . It's very helpful for me .
@Thesketchupessentials3 жыл бұрын
Glad it was helpful!
@endosuanda21832 жыл бұрын
Thank you very much. It is a wonderful tutorial, although I am a dummy, a real beginner
@govenr6 жыл бұрын
Aloha Justin, Great video with lots of great info and excellent explanations. You have the best videos by for teaching and explaining without being wordy. Keep up the great videos and I'll keep following you.
@Thesketchupessentials6 жыл бұрын
Thanks very much! Glad you're enjoying the videos!
@mogisanjaya26453 жыл бұрын
Thank you so much for the tutorial.. It's really help me lot. 🙏
@deisterminer2 жыл бұрын
Thank you great job
@bjparagas41176 жыл бұрын
I like the way your tutorial very easy and very understand.
@Thesketchupessentials6 жыл бұрын
Thanks very much - glad you found it helpful!
@meghasrivastava73472 жыл бұрын
Supercool..so much to learn from you!!
@kev66112110 ай бұрын
I am a sheet metal fabricator at Auburn University. When we do change outs the new unit never line up with the old ductwork. I always seem to bring the field measurements back to the shop and build it backwards. Is there a way to make a 3 d drawing with measurements and split the pieces apart with the measurements so I can transfer measurements to metal. Thanks Kevin
@deanroadifer60134 жыл бұрын
Great info. Do you have a video on making pocket holes for mounting the aprons?
@suchitrabhardwaj94333 жыл бұрын
Excellent explanation 👌 👏
@bill-chichi97015 жыл бұрын
Just found your channel. Thanks for making these videos. At 62 my brain is a bit slower but sketch up is something I’ve wanted to learn. I enjoy woodworking and hope to learn how to create stuff. I have the 2016 free version, is there a site I can get the keyboard shortcut list?
@Thesketchupessentials5 жыл бұрын
Try this - help.sketchup.com/en/sketchup/getting-started-sketchup#qrc - Thanks! :)
@benvette16623 жыл бұрын
Nice one.
@justinlee52985 жыл бұрын
Thank you for this! Do you have the link to the other tutorial you said you had regarding the round table legs and the follow me? Also. Is it possible to remove the object you've extruded after you use the follow me tool? I'd like to make the profile of the leg. check it on the table according to your directions, but I need to get it back to the profile so I can print it. basically, i want to give my wife several leg options and let her see it on the table model, then choose the one she wants and take that leg back to the profile so I can print it and use it as a profile for a leg duplicator lathe. THanks for all your help!
@oldhams60174 жыл бұрын
thanks fro the video... one question, when you are editing the legs I understand that editing one component changes the other three , but when you scale the second leg, it does not impact the other legs - not sure I understand what you did to get a different response. I thought you must make the instance 'unique' which breaks the linkage permanently.
@oldhams60174 жыл бұрын
Ha - got it! You can scale and rotate and 'component instance', but that's all, no editing, which makes sense!
@mostaza14644 жыл бұрын
Great video!! Thank you!
@Thesketchupessentials4 жыл бұрын
Thanks!
@firoj48303 жыл бұрын
thank u so much.
@Thesketchupessentials3 жыл бұрын
Welcome!
@nirmal63624 жыл бұрын
thank you very much.
@mariologtenberg4 жыл бұрын
Thanks, great info, ( though a bit fast at times for us non native speakers). the so called "skirt elements" are called "aprons" by woodworkers :-)
@Thesketchupessentials4 жыл бұрын
Lol - thanks very much - it's hard to get my terminology right sometimes on this topic :)
@arjunrai69633 жыл бұрын
Thank you sir.
@Thesketchupessentials3 жыл бұрын
Welcome!
@suryarana16485 жыл бұрын
Sir sketup sikna ha kasa please help sketup setting or sare command use karna vale video
@DarkMoonDroid3 жыл бұрын
17:14 Ha!!!
@rickharms15 жыл бұрын
Y
@Thesketchupessentials5 жыл бұрын
??
@user-qo8oo6ze6c7 жыл бұрын
ซูอีดมากครับ
@speedy94953 жыл бұрын
I'm so sorry for all the people with OCD watching him rotate those legs and leaving them non-symetrical