Binge watching all your content.

Rose cut jems are just *chef’s kiss*. I love them so much but they are so underrated!

Rose cuts are making a comeback. I’ve always loved the way they look. Many years ago I inherited a huge mine cut diamond which I had put into a heavy gold ring. A grader from the GIA told me that it was probably cut before 1800. I love it and wear it all the time.

This ring. I love it. So simple and so beautiful.

I ABSOLUTELY LOVE this design! So simple and elegant! And displays the jewel beautifully! Also: if this video lasted 3 hours I still would have watched it!

Rose cut stones have a special ace in my heart... About 23 years ago I inherited my grandmother's engagement/wedding set. A jeweler did a minor repair and asked me the history of the well worn set. Then he told me that based on the style and rose cut center diamond on the engagement ring that the set was more likely HER grandmother's set, dated cir. 1900. (She wasn't born until 1919) I am hoping one day to have the set restored (center diamond is very loose because prongs need retipping, plus the set was soldered together and due to wear and that many fine details have been worn away/hidden). More likely will pass it down to someone in the family who will be able to get that done. 👏🏻👏🏻👏🏻 to the Goldsmith.

Love the minimalism. The editing probably took longer than making the ring!

Sometimes, simple really is best. What a great choice to highlight the beauty of a rose cut gem!

I am so addicted to watching your videos now. Everytime you start in with the hammer, I panic thinking ‘Oh gawd, this is where it gets ruined’ then it always comes out stunning!

Perfect sequel to the Rings of Power :) Love the note "by Sauron" lol

Unusual, don't think I've ever seen a rose cut!

Oh how I love a rose cut diamond. They are so underrated. 💙💍

Love the simplistic look to this … LESS is MORE in this case … just love it ❤️

So mesmerized by this whole process

beautiful ring, i wish there were more jewelers like you.

perfect way of working, I like your way of working, greetings from Indonesia 😊👍🙏

A beautiful ring. Really enjoyed watching you make it. Absolutely stunning result at the end. 💍💚

Sauron wants his book of secrets back.

I have a copy of “Goldsmith secrets” too! Kind of tough having to give up my firstborn child for it - but totally worth it in my opinion!

Love your films, THX!

Such a gorgeous ring. Been doing more research on rose cuts and can’t believe they aren’t more popular!

Such a pretty ring. Simple, elegant, timeless.

It's perfect. Simple and beautiful. I love the rose cut with the detailed edges.♥️💍✨

Loved this video!! I'm a beginner silversmith and I was watching this in awe. Going to try out my own rose cut prong ring now! :)

Wow I really liked that setting. Yes, I'm also binge watching them all, Jordan!

Awww...i saw this video to years ago, i still cant forget this ring🥰

I love this ring. So simple and stunning.

These remind me of an old European cut. Can only pull this off with a really clean diamond because you will see all the flaws. I love the simplicity.

That is awesome. Your passion for your craft is other worldly.

Beautiful ring, beautiful rose cut diamond , enjoy watching the process , lovely

Beautiful ring. Wonderful work. Thank you for sharing this and I love rose cut stones,too.

What a beautiful simple classic ring

beautiful video, really clear. i'm so happy to see that there are such good goldsmiths

The making of the ring and the editing was spectacular! Great job 👍🏼

Single diamond looks very elegant.

Absolutely gorgeous!

This is so cool! Have you ever done a video on ring maintenance? I got engaged in August. My ring is from 1910(ish), and an emerald, which I know are particularly soft. I just have no idea how I need to maintain it. There are also 6 very tiny diamonds in a platinum halo around the diamond which I’ve been told will need to keep an eye on because they could get lost easily. I just have no idea who to even go to about this? Or how often that needs to happen?

WONDERFUL I really ENJOYED the whole process 👌🏽👌🏽👌🏽

Much prefer the handmade personally, looks so pretty and dainty

Pretty ring. Simple and appealing.

hi, thank you ;)

You're a great story tell! Keep those videos coming!

Best video yet!!

Gorgeous!

You’re such an underrated creator! Keep doin’ what you’re doing because it’s brilliant!!

BEAUTIFUL!!!!!!!!!

LOVE!!!

Awesome!

Love you for making these video's, thx

i would love to see you make other jewelry as well!

Thank you for sharing!

Gorgeous

Te felicito es un hermoso trabajo sencillo y bien hecho....

So beautiful

Very well made, ring and video. 💕

Top job!!!

Mesmerizing 😍

Thanks to your content, i was able to make my gf 2 rosegold rings

Beautiful x

So lovely

lovely ring

Very nice. I like this setting way better than rings that have the diamond pertruding high above the band.

Amazing: thanks ^^

I love it. 😍

Very good beautiful

As a jeweller myself, I might recommend you use less solder on your joins, and make your claws the right length before filing them a few times ( just to save excess gold going to lemel) I also think the claws are just slightly too thick for the ring design. (Constructive criticism I love your videos!)

That was incredible! Keep up the amazing work and keep making videos!

Lindstrom cutters 👌

This ring is so gorgeous.

What a lovely simple piece. Love rose cut stones, a refreshing change from the plethora of round brilliant cuts out there. I wish you were nearer, I’d definitely commission a ring from you.

So interesting ✌️❤️

Pues páramo esa piedra es un brillante o diamante y pienso q merecía una mejor pieza

May I say that you make some beautiful looking rings and other jewelry to I have sat here watching you KZfaq video..and watch you make some beautiful things like this ring here ...see I love art deco style rings and this one I love...my question is how much would a ring like that cost.

Perfeito 🇧🇷

Ohhh nice 😍😍😍😘😘

do all of us jewelers just love lotr? my whole shop loves it we listened to the children of hurin audio book read by Sir Christopher Lee just last week haha!

Beautifully simplistic and absolutely gorgeous! Almost wish I'd seen this ring before getting my engagement ring. My ring has the solitaire setting, equally beautiful diamond, just not as much pizzazz. Lol

It looks so delicate. How well would something like this hold up everyday? Iv made silver rings and set stones in them and want to try this.

When you hammer the wire you changed its shape.. I like it round

I wanna take some wire and braid it together to make a ring, problem is ive never even tried to make a ring before

Really got a curve on that torch tip!! Do you do that to all of them? Is it just to be able to hold the torch at a different angle?

Hey! I've always wanted a braided ring, like a braid around my finger. Would this be possible and how would it look? I'm conserned about the tightness of the braid... Thanks for great videos!

Hey I want to make an engagement 💍 for my girlfriend but where do I find genuine 14-18k gold wire from? I'm looking to buy a foot because I'm going to try a braided style. I think solid yellow or rose but I've thought about filled as well. Any tips on supplies to use for a small project or vendors? Thanks

Hi, I love this, beautiful job. I'm a jewellery student just branching out to setting and love rose cut gems. Can I ask what are the sanding papers/discs called for your micro motor - the ones that you used first. And the sanding drum? I normally use a split mandrel and add my own sand paper, but yours look more solid, what are they called? Thanks in advance!

❤❤❤❤❤❤

I want this ring

Do you make your own music for your videos? I'm digging it

Hi. Nice ring. How do jewelers buy gold for projects

Do you think you can make this same ring with like a big oval diamond, would that still work?

I have gold jewelry and some family diamonds I want to be created into a new ring and I love your work! I would love a consult and quote.... how do I go about doing that?

This may be a dumb question but does an oval rose cut diamond have a bowtie like brilliant cut ovals?

Dumb question but do you have a store . Love your pieces and would love to get tt this ring for my daughter in law for birth of their beautiful baby girl

Will you please tell us what you're doing at each step? How much did you sell this for?

How can you call the technique at 5.38 and what's the reason that you use it? Great video at all.Keep going

Very nice. What is the band"s width? What is the carat weight?

Why is the tip on the little torch bent like that?

What gauge wire did you use?

Do you use oxyacetylene? Also what kind of flux and solder do you use?

I have a question for you. I have a beautiful eight carat tanzanite set with diamonds all around. I would like very much to enhance the color a bit. It is in the Violet range of colors. Is this something that can be done once the ring is set? Thank you. I also have a lovely ring that consists of my grandmother's two engagement diamonds, my mom's half carat diamond, and a few chips. I might possibly have some other diamonds around and was wondering if we could speak about the possibility of making something modern out of it. They are all set in one ring and I don't dislike the setting but it has broken. It's also a bit big for the top of my finger so I thought maybe we could talk and we might be able to come up some ideas. Right now the priority is finding out if I can treat the untreated tanzanite. Thank you.

I really want to get an estimate from you for an engagement ring and 2 bands. What’s the best way to get a quote? And what’s your typical lead time? Thanks.